summaryrefslogtreecommitdiff
path: root/src/superio/nuvoton
AgeCommit message (Collapse)Author
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-31superio/nuvoton: Improve code formattingElyes HAOUAS
Change-Id: I8cdfa5c3e3508ea8ad969df6513401611a066fc5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39930 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25superio/nuvoton/nct5104d: add chip config option to reset GPIOsMichał Żygowski
Define a chip option to explicitly soft reset all enabled GPIOs to default state. TEST=boot FreeBSD 11.2 on PC Engines apu1, change GPIO configuration using nctgpio module and check whether GPIOs are reset after reboot Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iae4205574800138402cbc95f4948167265a80d15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-11superio/nuvoton/nct5539d: Update documentation and remove DSDTPatrick Rudolph
There seems to be no board using this, but some currently under review. Remove the DSDT, which doesn't work together with the SSDT ACPI code generation. Also update the documentation pointing to the SSDT generator. Change-Id: I8b7daeadaaac93d74ee2fc9eb18f0eff5ef50eb3 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-02superio/nuvoton/npcd378: Switch to superio/commonPatrick Rudolph
Replace DSDT ACPI code and DSDT injection with a SSDT only solution. The current implementation shows some issues on current Linux, which might be due to external ACPI objects, which are then injected into DSDT or the fact that those objects only use 3 characters. Replace all the DSDT code with an SSDT generator. Tested on HP Z220: Boots into Linux with no ACPI errors. The SSDT can be disassembled. Change-Id: I41616d9bf320fd2b4d8495892b8190cd2a2d057f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-02-09superio/nuvoton/nct5539d/acpi: fix # comment in superio.aslPavel Sayekat
Change-Id: Ic2ba1f9b744014f97d318671bf86468f4d6c6469 Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-01-30src/superio: replace license boilerplate with SPDXFelix Held
The authors from the header of the files are added in a previous commit. Change-Id: Iafeaafb9689c65bd2f5de3960097ec0d4c1009e7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38544 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-20superio/nuvoton/nct5104d: Add virtual LDN for simple GPIO IO controlPiotr Kleinschmidt
Now, Super I/O GPIOs can also be controlled directly through access to I/O registers. VLDN 108 and specific I/O port from a range <100h; ff8h> may be enabled in mainboard devicetree. Change-Id: I4ce99bb44e6f5db684170f4190bdc38a944849f6 Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35849 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-15superio/nuvoton/nct5104d: Add soft reset GPIO functionalityPiotr Kleinschmidt
So far, only hard power off could reset GPIOs state to defaults: IN, Open-drain. Now, defaults are set with every boot to ensure that GPIOs are not in unknown/unwanted state. Change-Id: I67878dbab2ddf0deaaa8f5d79416368c6164ba1d Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-01-09drivers/pc80/rtc: Separate {get|set}_option() prototypesKyösti Mälkki
Long-term plan is to support loading runtime configuration from SPI flash as an alternative, so move these prototypes outside pc80/. Change-Id: Iad7b03dc985550da903d56b3deb5bd736013f8f1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38192 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-30superio/nuvoton: add common HWM bank select functionFelix Held
Change-Id: I828b6caa37e52c13e1876c7ca4edbd171e70d3f7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37945 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-13superio/*: Don't use conf_mode directlyPatrick Rudolph
Use the functions defined in device/pnp.h instead of using the conf_mode directly. This will make future refactoring easier. Change-Id: Ibb94d86b3ee861f44cded469ff58b545dd7311fd Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-05superio/{aspeed,nuvoton}: Fix typoElyes HAOUAS
Change-Id: I7772fadc756ceeef5988e4b1ecf8f93ad3605a84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-01src/superio: Remove unused include <stdlib.h>Elyes HAOUAS
Change-Id: I941c3d80d6b822b12a2d0c279415ab0c6b7f375b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-01superio/nct5539d: include the missing acpi.h and ssdt.hMaxim Polyakov
Change-Id: Idd80fae1c39f3c7c4bc66a42e9023fb7a727b024 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-05superio/*/*/acpi: Improve the readability of the IndexFieldElyes HAOUAS
Change-Id: I64fdcbcbbd54334c1c551bc1346c6000ea82c97d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-04superio/nuvoton/nct5539d: use SuperIO ACPI generatorMaxim Polyakov
Adds SuperIO SSDT ACPI generator[1] support. Not tested on real hardware. [1] https://review.coreboot.org/c/coreboot/+/33033 Change-Id: If9fd56efd40ee0f860e206882418c8bdc7c16802 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-04superio/nuvoton/nct6791d: use SuperIO ACPI generatorMaxim Polyakov
Adds SuperIO SSDT ACPI generator[1] support. It has been tested on Asrock H110M DVS motherboard [2]. [1] https://review.coreboot.org/c/coreboot/+/33033 [2] https://review.coreboot.org/c/coreboot/+/36381 Change-Id: Idad66546168bbd26f0a4241deb66e5bfd83367af Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-20superio: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Change-Id: I55e7b680e128f29a9fd549edfb676e6571330677 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-18superio/nuvoton/nct5539d: Add nuvoton NCT5539D specific superio.aslPavel Sayekat
This port is based on NCT6776 Change-Id: Ib8d64e8faa74802ab0213d87881e57d4d9bd1c35 Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35028 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29src/superio/nuvoton: Add support for NCT5539DPavel Sayekat
Values taken from NCT5539D datasheet V1.1 (June 30th, 2015). Change-Id: I7e979bde53ce3dac1a4f74e7e51a3c6a0149051c Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33842 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-22nuvoton/early_serial: improve comments on serial pinmux settingsFelix Held
Change-Id: I36c0d752df97810bd99d2eec27403545421ce533 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-21superio/nuvoton/nct6776: Make Kconfig symbol dependentAngel Pons
The SUPERIO_NUVOTON_NCT6776_COM_A symbol should only be visible if SUPERIO_NUVOTON_NCT6776 is selected as well. Change-Id: I9c52d596080360bf3fc25265749ced66ec44f5dc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33440 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21superio/nuvoton/nct6791d: Add symbol to select COM portAngel Pons
Like the NCT6776, the NCT6791D has muxed COMA/GPIO8 functions. Since it requires setting different bits, add a new Kconfig symbol to do it. Change-Id: I62dc18810026f9b1550da19950f66af605600ec8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <m.poliakov@yahoo.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04device/pnp: Add header files for PNP opsKyösti Mälkki
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31698 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24superio/wpcm450: fix keyboard IO masksFelix Held
The two IO regions of the keyboard controller are 1 byte long, not 8. Change-Id: I7319ce9f84181759f4dc7b59c0020f3a5dd5dc03 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/30958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06superio/*: Link early initialization into bootblockArthur Heymans
This allows to set up the SuperIO in the C_ENVIRONMENT_BOOTBLOCK bootblocks. It is likely unnecessary to do this in verstage. This also renames COMMON_ROMSTAGE to COMMON_PRE_RAM. Change-Id: I3d999611baa1e79c79fe6b1f01822ebaa5f85daf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-19src: Add required space after "switch"Elyes HAOUAS
Change-Id: I85cf93e30606bc7838852bd300a369e79370629a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-03superio/nuvoton/nct6776/acpi: Add PS/2 mouse supportTristan Corrick
By defining SUPERIO_KBC_PS2M, ACPI code is added to show the PS/2 mouse. This has been tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. In each case, the PS/2 mouse works automatically, whereas it was not detected before. Change-Id: I7983f85b3fd23547950f1f75a81bbca63c63d52b Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/nuvoton/nct6776/acpi: Add parallel port supportTristan Corrick
Exposing the parallel port via ACPI causes Linux to automatically detect the parallel port and load the appropriate modules. Tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. However, no parallel port device has been tested. Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/nuvoton/nct6776/acpi: Fix typo in commentsTristan Corrick
The constant used in the ACPI code is NCT6776_SHOW_KBC, so update the comments to reflect that. Change-Id: I9ba69384866088f84a516557d76864104a024968 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-24superio/nuvoton/npcd378: Add ACPI code for S3 resumePatrick Rudolph
Configure SuperIO on shutdown to keep devices enabled, set green LED to fading on sleep and normal on wake. Add SSDT to write LDN4 IOBASE addresses stored in devicetree.cb. Tested on HP8200: * Wakes from power button or USB keyboard. * LED is fading Change-Id: I2035249a39616aa2d87bd93f9e49c70d231546cc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-22superio/nuvoton/npcd378: Fix resource sizePatrick Rudolph
Based on vendor ACPI code. Change-Id: I4d6785efb9d18953042775e7164710ef3c041ed5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-18superio/nuvoton: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I18345d7cc50a7d46cb15584dfb54df28e8534f81 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-01superio/nuvoton/npcd378: Add PSU fan controlPatrick Rudolph
Implement method to access the SuperIO's harware monitor (HWM) IO space. Set the PSU fan using a new CMOS option psu_fan_lvl. Add the CMOS option to all board that use NPCD378. In case no CMOS is set use the default fan level 3. The HWM space can be written to at any time, but the SuperIO has to be notified that a write is ongoing. After clearing the write-lock bit all changes are applied at once. Tested on HP Compaq 8200 SFF. Change-Id: I56ce7ad1df88638589a577b8a09d5d775557887b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26050 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14superio/nuvoton: Add support for NPCD378Patrick Rudolph
The NPCD378 can be found on at least: * HP Compaq 8200 * HP Compaq 8300 The datasheet is not publicly available, as HP implements lots of custom hardware. Add basic support for it, based on HP Compaq 8200. The first eight LDNs seem to be standard nuvoton compatible, except for LDN4, which is used to control front LED and power in ACPI S3. LDN8 provides access to HP's proprietary HWM which is accessiable at the LDN's IOBASE with a size of 0x100 bytes. The HWM consists of 16 pages with each holding 0xff bytes. The pages can be selected by writing the page index to IOBASE + 0xff. TODO: Reverse engineer the HWM to support fan control. WARNING: The remaining LDNs have been guessed and might be wrong! The serial has been tested and is working. Change-Id: Ib497fd41b88e9c159eeeffa69bc2bfdccee9cb38 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/25384 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-07nuvoton/nct6776: Add ACPI declarationsTobias Diedrich
Add ACPI declarations to be incorporated into ACPI tables for mainboards with this super I/O. Tested on Intel NUC DCP847SKE, Linux 4.13.14. Change-Id: Idb76b2e99e90a213e2695efc1afd4fa9069c134f Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30nuvoton/nct5572d: Disable mouse controller also during resumePaul Menzel
Currently, having a keyboard connected to the PS/2 controller of the ASRock E350M1, after suspending and resuming the system, the keyboard does not work anymore. A similar problem is documented in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect) [1]. There is no reason to not disable the controller during resume. Also, that way, the PS2 ASL method does not need to be overriden. [1] https://review.coreboot.org/13165 TEST=Resume system, and notice PS/2 keyboard works. Change-Id: I51dc446861120f80bc9ffc4cc54b86e317d99689 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30superio: Log if mouse controller is disabledPaul Menzel
It’s useful to know, if the mouse controller is disabled or not, so convert the comment to a log message. Change-Id: Ic3f7d5b7b98cf8c258a6a601f4a44ce403f4a576 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-06-13device/pnp: remove struct io_infoSamuel Holland
The 'set' field was not used anywhere. Replace the struct with a simple integer representing the mask. initializer updates performed with: sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04]? ?\}/0\1/g' \ src/ec/*/*/ec.c sed -i -r 's/\{ ?0(x([[:digit:]abcdefABCDEF]{3,4}))?, (0x)?[04] ?\}/0\1/g' \ src/ec/*/*/ec_lpc.c \ src/superio/*/*/superio.c \ src/superio/smsc/fdc37n972/fdc37n972.c \ src/superio/smsc/sio10n268/sio10n268.c \ src/superio/via/vt1211/vt1211.c src/ec/kontron/it8516e/ec.c was manually updated. The previous value for IT8516E_LDN_SWUC appears to have been a typo, as it was out of range and had a zero bit in the middle of the mask. Change-Id: I1e7853844605cd2a6d568caf05488e1218fb53f9 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Myles Watson <mylesgw@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-11superio/nuvoton: Make SuperIO config functions externally availableArthur Heymans
Change-Id: I05f768c67542770e65279a562c05225b84edca40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2016-11-28sio/nuvoton: Include generic nuvoton driver in bootblock stageTeo Boon Tiong
The purpose of this change is to enable serial output in bootblock stage Change-Id: I8e075f1e70d1a6598dfdc34931218f5af9637178 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17359 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01superio/nuvoton: Add back Nuvoton NCT6776 supportTeo Boon Tiong
Revert commit 53552cc0 (Drop SuperIO nuvoton/nct6776), removing the code as no other mainboard uses it. The board Intel Saddle Brook uses this device, so add the code back with minor adaptations. Change-Id: I546879285ad8336e81798d0fbdf94f72e1fa61a2 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/16519 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-09superio/*: Relocate Kconfig to chip folder.Omar Pakker
This moves the Kconfig from the Super I/O manufacturer folder to the chip folder instead. This makes new chip commits self-contained unit as edits to the central Kconfig file are no longer required. Change-Id: I7aee07919f2ae9204850c669e0ed3cb17d4de8cd Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15973 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2016-07-31superio/nuvoton: Add Nuvoton NCT6791DOmar Pakker
This adds support for Nuvoton NCT6791D Super I/O chips. Makes use of the common Nuvoton early_serial.c. Based on the Datasheet supplied by Nuvoton. Datasheet Version: January 8th, 2016 Revision 1.11 Change-Id: I027d33b85f0dc6ee50deebdccaecc74487eecb40 Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15967 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-04-02superio/nuvoton: Use official spelling of Nuvoton in `CHIP_NAME`Paul Menzel
The official spelling of Nuvoton is not all uppercase. Only the first letter is uppercase. See the footer of the Nuvoton Web site. Change-Id: I6ccd4194d7be0c89f8b332fcca5feb2420a4de1e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/5928 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09superio/nuvoton/nct5572d: Add PS/2 presence detectPaul Menzel
On certain Super I/O devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. This is added in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect). Update the Nuvoton NCT5572D driver to flag the auxiliary channel as disabled if no device was detected. The code is copied from the Winbond W83667HG-A driver. Note, the ACPI changes are not part of this commit. TEST=Currently, on the ASRock E350M1, PS/2 does not work. With this change, a PS/2 keyboard works fine in SeaBIOS, GRUB in MBR, and Debian GNU/Linux Sid/unstable with Linux 3.19. ``` [ 1.185195] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.189110] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.189133] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.189970] mousedev: PS/2 mouse device common for all mice ``` Change-Id: I7f9be348d295e70437bef089d4c2173169f38459 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/13618 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-16Revert "Drop SuperIO nuvoton/nct6779d"Stefan Reinauer
This reverts commit 42444f6f53d47604d9a44c9e109b5717efaed74f. Change-Id: Ifaaaad715d94c3c9ff365745aa2e6ee546924f4f Reviewed-on: http://review.coreboot.org/12328 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-02superio/nuvoton/nct5572d: Add missing logical devicesKyösti Mälkki
While the actual pins behind these devices are not exposed on the chip, the enable registers are implemented in hardware. Allow to turn these LDNs off, like the vendor bios for asrock/e350m1 does. Change-Id: I4d6d5a8de12b09095138cacbad62b2dfbbe54028 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/12213 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop SuperIO nuvoton/nct6779dStefan Reinauer
All boards using this SuperIO have been removed from the tree already. Change-Id: I57eacf2a88077d0d0bffdcf44b3c2ecbd301e625 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12242 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop SuperIO nuvoton/nct6776Stefan Reinauer
All boards using this SuperIO have been removed from the tree already. Change-Id: Ic5604c75de249b945dca58aa904edec86558d3ec Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12241 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23superio/nuvoton/nct5572d: Enable power state after power failure supportTimothy Pearson
Change-Id: Ia0313b9ecd64c9e6f99a140772ebb35abe0175fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11950 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-19superio/nuvoton: Add support for Nuvoton NCT6779DMatt DeVillier
Add support for Nuvoton NCT6779D, using NCT6776 as a baseline Change-Id: I020a21267f7e30bdea4bb5f83d67bd94082fdf05 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10232 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-05-17nuvoton/nct6776: there is no IRQ for LDN8Felix Held
Change-Id: Ib4ee3633d210a05e06ed95fc13830cc692095501 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/10235 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-14superio/nct5104d: Handle shared GPIO/UART pinsKyösti Mälkki
Routing is decided based on enabled logical/virtual devices. For a valid devicetree, one should have only one of SP3 and GPIO0, and only one of SP4 and GPIO1, enabled at a time in configuration. Change-Id: I02017786aba9dd22d12403aaa71d7641f5bbf997 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-14superio/nct5104d: Refactor IRQ trigger configKyösti Mälkki
That function was getting too long. Change-Id: Ic50f210391c2467b65215aa556269b0ba601c2ec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10176 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-12-01Mark non-executable files non-executablePatrick Georgi
No need to mark Makefiles, C files or devicetrees executable. Change-Id: Ide3a0efc5b14f2cbd7e2a65c541b52491575bb78 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-30superio/nuvoton: Add support for Nuvoton NCT6776Felix Held
Add support for both NCT6776D and NCT6776F devices. Change-Id: If6686ea0a1cd6be537e286699b4ee8f88ba8ad7c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/5450 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-30superio/nuvoton: Add support for Nuvoton NCT5572DFelix Held
Change-Id: I3b720cf879bf5326be885d2d3a3f9cfba0a27c7e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/6229 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2014-10-27superio/*/superio.c: Don't hide pointer types behind typedefsEdward O'Callaghan
Hiding pointer types behind 'typedef's is usually not a great idea at the best of times. Worse the typedef becomes an integer at different stages in Coreboot. Let us refrain from doing this at all. Change-Id: Ia2ca8c98bb489daaa58f379433875864f6efabc8 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7136 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-10-27superio: Use 'pnp_devfn_t' over 'device_t' in romstage componentEdward O'Callaghan
The romstage component of Super I/O support is in fact written around passing a lower and upper half packed integer. We currently have two typedef's for this, 'device_t' and 'pnp_devfn_t'. We wish to make use of 'pnp_devfn_t' over 'device_t' as 'device_t' changes it's typedef in the ramstage context and so is really a conflicting definition. This helps solve problems down the road to having the 'real' 'device_t' definition usable in romstage later. This follows on from the rational given in: c2956e7 device/pci_early.c: Mixes up variants of a typedefs to 'u32' Change-Id: Ia9f238ebb944f9fe7b274621ee0c09a6de288a76 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6231 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-07-17superio,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: Ia452e22af9491c1681c859691eb4ac1868eeb938 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6282 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-20superio/nuvoton: Add chip support for setting IRQs to edge/levelDave Frodin
Change-Id: I08b9eef9d6b0f120c17c3293f1f90b847742dc06 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/6064 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-20superio/nuvoton: Adds a function to route pins 41-48 to UARTDDave Frodin
Pins 41-48 default to being GPIs. This switches the internal mux to connect them to UARTD. Change-Id: I61393b8c35cbc664f6520f60eed09ba4bbede0dc Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-09nuvoton/nct5104d: Update the #defined LDNsDave Frodin
Change-Id: I4e4bc09a8f8fabe68519a29dc421af82c76c9873 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5944 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06superio/nuvoton: factor out generic romstage componentsFelix Held
The romstage of Nuvoton Super I/O chips (but not Nuvoton BMC chips) is identical, so the early_serial.c file can be moved under nuvoton/common. The Nuvoton BMC chip WPCM450 is however left untouched. Change-Id: I4663176c1003b24a49a9fe5f9ebd27a1963b5565 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/5909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-05-13superio/*: Remove redundant chip.h headerEdward O'Callaghan
Change-Id: If7141112ea67071ee05c52f455c3b2496aa7e17e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5622 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-13src/drivers/pc80: Remove empty struct keyboardEdward O'Callaghan
This is a empty struct that has propagated through the superio's & ec's but really does nothing. Time to get rid of it before it adds yet more cruft. However, since this touches many superio's at once we do this in stages by first changing the function type to be a pure procedure. Change-Id: Ibc732e676a9d4f0269114acabc92b15771d27ef2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5617 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-04-06superio/nuvoton/nct5104d: Avoid .c includesEdward O'Callaghan
Following the same reasoning as commit d304331 superio/fintek/f81865f: Avoid .c includes Clean up the early_serial #include directives in mainboard/romstage code. Change-Id: I14c438968bfed917977862efd8a393ec48cb04c9 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5446 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06uart8250: Drop includes in superioKyösti Mälkki
Change-Id: If723896cc31da75dbb3a63d5dc959764e96fded1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-07Correct file permissions.Idwer Vollering
Some files have incorrect/odd permissions, correct them: remove unnecessary +x flags. Change-Id: I784e6e599dfee88239f85bb58323aae9e40fb21c Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4490 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-07-03pnp: Add some default functions to enter/exit config stateNico Huber
Implement some common default functions to enter and exit the configuration state. Also provide default pnp_mode_ops for common enter()/exit() function pairs. The following cocci ensures their use: @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; @ enter_match_8787 @ identifier mode_match.enter, dev; @@ enter(...) { outb(0x87, dev->path.pnp.port); outb(0x87, dev->path.pnp.port); } @ depends on enter_match_8787 @ identifier mode_match.enter, mode_match.ops; @@ struct pnp_mode_ops ops = { - .enter_conf_mode = enter, + .enter_conf_mode = pnp_enter_conf_mode_8787, }; @ enter_match_55 @ identifier mode_match.enter, dev; @@ enter(...) { outb(0x55, dev->path.pnp.port); } @ depends on enter_match_55 @ identifier mode_match.enter, mode_match.ops; @@ struct pnp_mode_ops ops = { - .enter_conf_mode = enter, + .enter_conf_mode = pnp_enter_conf_mode_55, }; @ depends on enter_match_8787 || enter_match_55 @ identifier mode_match.enter; @@ -enter(...) {...} @ exit_match_aa @ identifier mode_match.exit, dev; @@ exit(...) { outb(0xaa, dev->path.pnp.port); } @ depends on exit_match_aa @ identifier mode_match.exit, mode_match.ops; @@ struct pnp_mode_ops ops = { - .exit_conf_mode = exit, + .exit_conf_mode = pnp_exit_conf_mode_aa, }; @ depends on exit_match_aa @ identifier mode_match.exit; @@ -exit(...) {...} @ depends on enter_match_8787 || enter_match_55 || exit_match_aa @ @@ #include <device/pnp.h> +#include <superio/conf_mode.h> @ mode_match_55_aa @ identifier ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = pnp_enter_conf_mode_55, .exit_conf_mode = pnp_exit_conf_mode_aa, }; @@ identifier mode_match_55_aa.ops; @@ -struct pnp_mode_ops ops = {...}; @@ identifier mode_match_55_aa.ops, devops; @@ struct device_operations devops = { - .ops_pnp_mode = &ops, + .ops_pnp_mode = &pnp_conf_mode_55_aa, }; @ mode_match_8787_aa @ identifier ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = pnp_enter_conf_mode_8787, .exit_conf_mode = pnp_exit_conf_mode_aa, }; @@ identifier mode_match_8787_aa.ops; @@ -struct pnp_mode_ops ops = {...}; @@ identifier mode_match_8787_aa.ops, devops; @@ struct device_operations devops = { - .ops_pnp_mode = &ops, + .ops_pnp_mode = &pnp_conf_mode_8787_aa, }; Change-Id: I1480336b54523cc95210d99cf31c1a0b3a14b464 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3484 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-06-17pnp: Remove now plain wrappers for default PnP functionsNico Huber
After removing the enter()/exit() functions for configuration mode, most wrappers for our standard PnP functions just call the underlying default implementation. Remove those with a little cocci: @ op_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; type device_t; identifier dev; @@ static void op(device_t dev) { pnp_op(dev); } @@ identifier op_match.op; @@ -op(...) {...} /* Three rules to match the alignment, hmmp... */ @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .set_resources = op, + .set_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable_resources = op, + .enable_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable = op, + .enable = pnp_op, }; Change-Id: Idc0e52c7e3600a01f3b6a4e17763557b271b481e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3483 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Register implementations of enter/exit config stateNico Huber
Find all the (ramstage) implementations of enter()/exit() functions for the configuration state, register and call them through the new struct pnp_mode_ops. As our standard PnP functions are aware of the pnp_mode_ops, it's not necessary to call enter()/exit() around them anymore. Patch generated with the cocci below. It's not perfect. The movement of the enter()/exit() calls is somehow fragile. So I checked the remaining calls for sense, and changed some empty lines. Also a duplicate insertion of pnp_conf_mode_ops had to be removed. /* Try to find enter and exit functions by their outb() structure and their usage around calls to our standard pnp functions: */ @ enter_match @ identifier enter; identifier dev; type device_t; @@ void enter(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ exit_match @ identifier exit; identifier dev; type device_t; @@ void exit(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ pnp_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; identifier enter_match.enter, exit_match.exit; type device_t; identifier dev; @@ void op(device_t dev) { ... enter(dev); ... pnp_op(dev); ... exit(dev); ... } /* Now add enter/exit to a pnp_mode_ops structure: */ @ depends on pnp_match @ identifier enter_match.enter; identifier exit_match.exit; identifier ops; @@ +static const struct pnp_mode_ops pnp_conf_mode_ops = { + .enter_conf_mode = enter, + .exit_conf_mode = exit, +}; + struct device_operations ops = { ..., + .ops_pnp_mode = &pnp_conf_mode_ops, }; /* Match against the new structure as we change the code and the above matches might not work anymore: */ @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; /* Replace enter()/enter() calls with new standard calls (e.g. pnp_enter_conf_mode()): */ @@ identifier mode_match.enter; expression e; @@ -enter(e) +pnp_enter_conf_mode(e) @@ identifier mode_match.exit; expression e; @@ -exit(e) +pnp_exit_conf_mode(e) /* If there are calls to standard PnP functions, (re)move the enter()/exit() calls around them: */ @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ -pnp_enter_conf_mode(e); pnp_op(e); +pnp_enter_conf_mode(e); ... pnp_exit_conf_mode(e); @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ pnp_enter_conf_mode(e); ... +pnp_exit_conf_mode(e); pnp_op(e); -pnp_exit_conf_mode(e); @@ expression e; @@ -pnp_enter_conf_mode(e); -pnp_exit_conf_mode(e); Change-Id: I5c04b0c6a8f01a30bc25fe195797c02e75b6c276 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3482 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Provide alternative pnp_enable() implementationNico Huber
The current default implementation of pnp_enable() only disables devices - if set so in the devicetree - but does not enable them. Enablement takes place in pnp_enable_resources(). Yet, many PnP chips implement their own version of pnp_enable() which also enables devices if set in the devicetree. It's arguable, if enabling those devices makes sense, before they get resources assigned. Maybe we can't write the resource registers if not, who knows? The least we can do is providing a common implementation for this behavior, and get rid of some code duplication. Used the following cocci: @@ expression e; @@ +pnp_alt_enable(e); -pnp_set_logical_device(e); ( -pnp_set_enable(e, !!e->enabled); | -(e->enabled) ? pnp_set_enable(e, 1) : pnp_set_enable(e, 0); | -if (e->enabled) { pnp_set_enable(e, 1); } -else { pnp_set_enable(e, 0); } ) Change-Id: I8d695e8fcd3cf8b847b1aa99326b51a554700bc4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3480 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-12Add new superio deviceSteven Sherk
- Added in new support for Nuvoton NCT5104D LPC device. Change-Id: I0af8c5e3e46fdd0a549475b30917897ae9e144a7 Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/3072 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-02-05SIO: condition compile Nuvoton WPCM450 early_init.cKerry Sheh
Compile Nuvoton WPCM450 early_init.c when CONFIG_SUPERIO_NUVOTON_WPCM450 Change-Id: Ie31b8ae6aa45d6f77efa2b61e215ba0987abf878 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/566 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-09Do not compile nuvoton superio for all boardAlexandru Gagniuc
The nuvoton WPCM450 code is compiled for all boards regardless of whether or not they use it. Compile it only for boards needing it. Change-Id: Iaf4cf2c479eb3238863f0771be799f02a8cc3421 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/129 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-04-19Drop baud rate init to an arbitrary baud rate from Super I/O code. ↵Stefan Reinauer
See discussion at http://www.mail-archive.com/coreboot@coreboot.org/msg29394.html config->com1, devicetree.cb cleanup and init_uart8250() removal will follow once this patch is comitted Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Updated to drop com1, com2.... from config structure and devicetree.cb git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6521 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-27This is for board Supermicro H8scm. The code was done by existing chips andZheng Bao
superiotool. WPCM450 is more like an EC. SuperIO is just a part of multi-features. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6461 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1