summaryrefslogtreecommitdiff
path: root/src/superio/ite
AgeCommit message (Collapse)Author
2008-09-26This patch fixes the dbm690t keyboard not working issue. It should alsoMarc Jones
fix the a8n_e and any other it8712f SIO keyboard issues. The it8712f requires an archaic PS/2 mode setting to the keyboard controller before accessing the keyboard. Beyond that, I made the keyboard controller and keyboard init more robust and added more informative debug output. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3610 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-23This patch adds support for watchdog kill and adds it to Asus M2V-MX SE.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-23The AMD dbm690t mainboard uses the it8712f SIO with theMarc Jones
default 48MHz clock input. The Asus a8n_e uses the it8712f with a 24MHz clock input. The it8712f early init code was setting a 24MHz input clock(to support the a8n_e). Since 48Mhz is the default I added a function to set 24MHz input clock to the a8n_e. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-06-22Enable hardware fan control for m57sli.Ronald Hoogenboom
Tested on v1 and v2 of the board. Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-26Temporarily disable the fan control patch from this morning; it turns out toWard Vandewege
stop the CPU fan on the m57sli v1.1 (PLCC) entirely, which is less than desirable. I did not notice before because my board ran fine for about 15 minutes before the CPU overheated. Thankfully the board has a good failsafe mode - it just switches off when the CPU gets too hot, without permanent damage. I'm debugging this and plan to commit a proper fix later in the week. This is not really trivial, but the tree is dangerous in the current state so I'm self-acking. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3118 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-25This patch adds automatic fan control for the CPU fan on the m57sliRonald Hoogenboom
board. This is done via the ec_init routine in a source file in the mainboard/gigabyte/m57sli directory. A Config variable 'HAVE_FANCTL' has been added to notify superio.c to get the ec_init externally. I (Ward) have tested this on the PLCC and the SOIC/SPI version of this board. It works. Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3116 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-01 This patch fixes the decoding of the IO address range 0x0820->0x0827 into theFlorentin Demetrescu
LPC device of the MCP55 southbridge, thus enabling flashrom access to the SPI interface of the IT8716 SIO chip. Changes : 1) - increase MAX_RESOURCES to 24 in device.h -> this was needed because some functions of a PNP device can have more than 12 resources (ex the GPIO function of IT8716f), in which case one could have an "array overflow" inside the device structure (yes gcc is stupid!..) and ultimately a disaster (fool pointer at device init time..) 2) - define resource masks for the GPIO function in src/superio/ite/it8716f/superio.c -> this is needed because otherwise the IO ranges which are set into the LPC bridge of the SB are very strange (f.ex.: 0x800->0x7ff and so on..). Problem: the PNP_IO0 resource is not defined for the GPIO function, thus we have to define a "fake" mask "{0,0}" to avoid mismatching by the init code 3) - enable the flash SPI interface into src/mainboard/gigabyte/m57sli/Config.lb (by enabling the corresponding resource into the GPIO function). I know that this is problematic because not all m57sli boards are SPI, but .. do anyone have a better idea how to handle this?.. Signed-off-by: Florentin Demetrescu <echelon@free.fr> I (Ward) have verified your patch on a rev2 of this board (it works!) as well as on a rev1 (plcc). It does not affect flashing on rev1 nor have any averse side effects that I noticed, so I think this patch should go in. Acked-by: Ward Vandewege <ward@gnu.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3088 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-12Fix the remaining issues with GA-M57SLI Super I/O GPIO configuration.Carl-Daniel Hailfinger
With this patch, flashing the parallel EEPROM on board revisions 1.x finally works. Flashing the serial EEPROM of board revisions 2.x is just one patch away. Torsten Duwe says: Flash erase on my board was failing reliably. Now it works! Andreas B. Mundt says: For the first time I was able to write with flashrom and LB. $flashrom -Vv --write linuxbios.rom [...] Vendor ID: GIGABYTE, part ID: m57sli Found chipset "NVIDIA MCP55", enabling flash write... OK. [...] SST49LF040B found at physical address 0xfff80000. Flash part is SST49LF040B (512 KB). LinuxBIOS last image size (not ROM size) is 4096 bytes. Manufacturer: GIGABYTE Mainboard ID: m57sli This firmware image matches this motherboard. Programming page: 0007 at address: 0x00070000 Verifying flash... VERIFIED. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Torsten Duwe <duwe@lst.de> Tested-by: Andreas B. Mundt <andi.mundt@web.de> Tested-by: Torsten Duwe <duwe@lst.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2955 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-24Various IT8712F fixes:Philipp Degler
- Add missing IT8712F_GPIO definition. - Add functions for entering and exiting MB PnP mode. - Add some more device init lines to pnp_dev_info[]. Signed-off-by: Philipp Degler <pdegler@rumms.uni-mannheim.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2695 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-04Some minor fixes in it8716f/superio.c:Uwe Hermann
- Add Ward Vandewege <ward@gnu.org> as copyright holder. - Use explicit 'uint16_t' instead of 'unsigned long'. - Minor cosmetics. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2634 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-04-27Add fan control support to ITE IT8716F.Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2620 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-04-02The *_early_serial.c pre-RAM code should do just that -- enable the serialUwe Hermann
port(s), and nothing else. The code in superio.c will initialize the rest when RAM is available... Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2579 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-03-02Add missing it8716f_early_init.c file, which got lost in the commit ofUwe Hermann
http://www.openbios.org/pipermail/linuxbios/2007-February/018330.html in revision 2559. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2566 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-02-24Improve ITE IT8716F support.Yinghai Lu
Signed-off-by: Yinghai Lu <yinghai.lu@amd.com> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2559 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-03RemoveUwe Hermann
#include <device/device.h> from all *_early_serial.c ITE Super I/O files, as arch/romcc_io.h already #defines device_t, thus adding device/device.h breaks the build (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2516 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-01Status update (trivial).Uwe Hermann
See http://www.linuxbios.org/pipermail/linuxbios/2006-November/017195.html Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2514 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-01Explicitly set the CLKIN to 24 MHz on all ITE Super I/Os, otherwiseUwe Hermann
serial output might not always work correctly (trivial). Thanks Philipp Degler <pdegler@rumms.uni-mannheim.de> for testing and reporting this issue. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-01Add missing #includes to some ITE Super I/O files.Jon Dufresne
Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2512 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-05Use the canonical name of the vendors/devices and theUwe Hermann
same format for all CHIP_NAME() entries in LinuxBIOS (Closes #20). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@linuxbios.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2490 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-04Various minor cosmetic changes in the ITE Super I/Os, mostly whitespaceUwe Hermann
changes and fixing of comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-01Adapt GPL license headers to match the current conventions.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2484 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-01Rename some variables from *ITE* to *ite* for consistency reasons (refs #4).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-06Add support for ITE it8705f from Uwe HermannStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-06Patch from Uwe Hermann:Stefan Reinauer
* support for it8716f. * minor fixes for it8712f, it8671f, it8673f git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-29merge latest code from Uwe HermannStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-29it8661f support from Uwe HermannStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-25Support for two new ITE superio parts: it8712fStefan Reinauer
and it8673f from Uwe Hermann. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2391 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-10fix serial initialization (from Uwe Hermann)Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-07add support for ite/it8671f superio from Uwe Hermann.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 05:16:10 +0000