summaryrefslogtreecommitdiff
path: root/src/superio/ite/common
AgeCommit message (Collapse)Author
2020-09-22superio/ite: Distinguish between chips for PECI readingsMichael Büchler
Some chips can read external temperature sensor values only to TMPIN3. These use EC register 0x55, bit 7 to enable that. This patch adds support for this. It is called "old PECI" by lm_sensors [0]. Other chips can read to any TMPIN[1-3] which is configured in EC register 0x51 like the other temperature sources. This was the only supported method. This patch adds a Kconfig option to indicate this variant. This patch was tested on an Acer Aspire M3800 which has an IT8720F that reads the CPU temperature via PECI. It allows the automatic fan control feature of the Super I/O to work. Overview of support per chip in the coreboot tree, determined from reading the publicly available datasheets or lm_sensors, if noted: Old PECI: * IT8718F * IT8720F * IT8781F, IT8782F, IT8783E/F Normal PECI: * IT8721F (exception: no PECI to TMPIN2) * IT8728F * IT8772E (uses separate code in coreboot, not superio/ite/common) * IT8786E * IT8613E, IT8623E (lm_sensors) [0] Linux kernel 5.4.48, drivers/hwmon/it87.c Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Iab7115852437d46c9b1269bba61ffcf680fe5a6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-24src/superio: Drop unneeded empty linesElyes HAOUAS
Change-Id: I3fd0cc00f32fa073cb2a6faf2802acdbe7db592c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44614 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-21superio/ite: delay PWRGD3 during resumeMichael Büchler
According to the IT8728F datasheet it is possible to add an extra delay between 3VSBSW# being set and PWRGD3 being set during resume from Suspend-to-RAM. This is enabled in the special function selection register, the default being 0. This is also useful for the IT8720F although this chip does not have the PWRGD3 output. On the corresponding pin it has PWROK2, which the setting then seems to apply to. The datasheet for the IT8720F marks the corresponding bit as reserved, but the vendor BIOS of an Acer Aspire M3800 sets it anyway. Without setting the bit, coreboot fails to resume from S3. Oscilloscope measurements have shown that setting the bit increases the delay between 3VSBSW# being set and PWROK2 being set from around 1 us to 140 ms. The actual use of PWROK2 on the board design is unclear - the only destination it seems to reach is a pin header near the SuperIO marked as "GPIO1". Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: I51cbf2470dc2b840a647a20090acb5a0cf4f4025 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-14superio/ite/common: Add support for closed-loop modeMatt DeVillier
Add support for tachometer closed loop mode, and programming of initial RPM vs initial PWM value. Change-Id: Idff29331c979f8518021103b6f8d19e75e657e3a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-10superio/ite: allow 24 MHz clock for external sensor interfaceMichael Büchler
The interface selection register of the environment controller (EC) gives the choice between "Internal generated 32 MHz" and "24 MHz" for the "SST/PECI Host Controller Clock Selection". Previously the chip was always configured for the 32 MHz clock. Add an option that can be set from devicetree.cb to allow using the 24 MHz clock. Without this setting the automatic fan control on an Acer Aspire M3800 was slow to respond to temperature changes. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Ib2bce10a828fb4a7d837f6c5f5b1d00cc51be0ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/44166 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10superio/ite: configure EC for fans to full at thermal limitMichael Büchler
This applies to the automatic fan control mode of the environment controller (EC). Previously the affected bit was always cleared while the default value is 1 according to datasheets. Add a variable that can be set per mainboard in devicetree.cb. In the IT8783E datasheet that bit is marked as reserved. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Ie74102ac0d54be33558c161c9c84594d121772b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-31superio/ite: Improve code formattingElyes HAOUAS
Change-Id: I014659aaddeb9fa2d5c3c3583e9379be4f9db69b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39929 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30src/superio: replace license boilerplate with SPDXFelix Held
The authors from the header of the files are added in a previous commit. Change-Id: Iafeaafb9689c65bd2f5de3960097ec0d4c1009e7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38544 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20superio: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Change-Id: I55e7b680e128f29a9fd549edfb676e6571330677 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16src/superio: Remove unused 'include <arch/io.h>'Elyes HAOUAS
Change-Id: Ia08e27da51f1f523232379960dc21c1ba4849932 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-08superio/hwm5_conf: factor out HWM access from ITE env_ctrlFelix Held
Nuvoton and Winbond use the same off-by-5 indirect address space to access their hardware monitor/environment controller in the SIO chip, so move this to a common location and replace the inb/outb calls with the corresponding inline functions from device/pnp.h Change-Id: I20606313d0cc9cf74be7dca30bc4550059125fe1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-15src/superio/ite/common: Prepare for ITE IT8786E SuperIOMichał Żygowski
Introduce 7bit Slope PWM registers. New ITE SuperIO may have contiguous 7bit values for PWM slope. Add option to enable External Sensor SMBus Host. Update/add registers macros for IT8786E-F which are not backwards compatible. Change-Id: I68fbfe62dfa05d0c166abaefbdc2ab873114b236 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04device/pnp: Add header files for PNP opsKyösti Mälkki
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31698 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-02superio/ite/common: add option for enabling 5 FANsKrystian Hebel
Some ITEs have more than 3 independent FAN controller outputs. As the initial implementation assumed only 3 outputs some registers are not consequently numbered. This change adds macros for accessing those registers. Additionally some chips have SmartGuardian always enabled, without the option for turning it off. For these chips bits that were responsible for ON/OFF control are either reserved or have different meaning. Another Kconfig option is added to disable ON/OFF functionality on platforms that do not support it. Change-Id: Icd60a16b6b5583a3b981bdc220aac472c2a8f40f Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/31616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-02superio/ite/common/env_ctrl.c: fix IS_ENABLED argumentKrystian Hebel
There was CONFIG_ prefix missing in SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG option, this patch fixes it. Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Change-Id: I52919671569175141560cb73e42344aa1725c112 Reviewed-on: https://review.coreboot.org/c/31674 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06superio/*: Link early initialization into bootblockArthur Heymans
This allows to set up the SuperIO in the C_ENVIRONMENT_BOOTBLOCK bootblocks. It is likely unnecessary to do this in verstage. This also renames COMMON_ROMSTAGE to COMMON_PRE_RAM. Change-Id: I3d999611baa1e79c79fe6b1f01822ebaa5f85daf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-04src/superio/{ite,smsc}: Remove space before tabElyes HAOUAS
Change-Id: I2829e4cb1445f8412f57da10fda6b92c92e56ea0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-04superio/ite/common: Add options to enable beepsVagiz Trakhanov
Add device tree options to enable beeps when exceeding temperature, voltage, and fan limits. As of this commit, setting voltage and fan limits is not implemented. Change-Id: I57ce622ee4498b75f00e678c2e6d72e499925bce Signed-off-by: Vagiz Trakhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/22141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-10-22superio/ite/common: Make PECI a thermal modeVagiz Trakhanov
Instead of setting "peci_tmpin" in the devicetree, THERMAL_PECI is now a mode of TMPIN like THERMAL_RESISTOR and THERMAL_DIODE. Since the logic to set temperature offsets and limits is in the function that sets thermal modes, it makes sense to treat PECI as yet another mode. As of this commit, there are no boards that actually use peci_tmpin from ite/common. There are three boards that have a similar device tree option, but those boards use it8772f, which implements all superio functions on its own. The first user will probably be Gigabyte GA-Z77-DS3H. Change-Id: I39da50c124ad767f8681302733cf004622975e81 Signed-off-by: Vagiz Trakhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/22076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22superio/ite/common: Add temperature limitsVagiz Trakhanov
Add devicetree options to set temperature limits that are used to alarm user when temperature exceeds defined values. Audio alerts by superio are not implemented yet, but since limits are visible to userland, some software might use them as is. For instance, lm-sensors displays "ALERT" when temperature exceeds limits. Change-Id: I56e041fb78f518d6a9640dc2b3985459991242b9 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-22superio/ite/common: Add temperature offsetVagiz Trakhanov
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-12superio/ite/common: fix prototype to match othersSamuel Holland
Change-Id: Id4a079d868c5c806c769b5559833566e8a6a8a71 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-12-07sio/ite/common: Export pnp_enter/exit_conf_state()Nico Huber
Change-Id: I8cbfe49516e685c1b3e150b23f9fcac513f1f3dc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17285 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-28common Ite EC driver: Enable PWM smoothing via devicetreeArthur Heymans
The devicetree parameter already existed without being used in the code. Change-Id: I99dd8bc7a9b2f3509a115a130062d462a62e33fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17614 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-17sio/ite/common: Add generic environment-controller driverNico Huber
The environment-controller entity is shared by many ITE super-i/o chips. There are some differences between the chips, though. To cover that, the super-i/o chip should select Kconfig options of this driver accordingly. The current implementation isn't exhaustive: It covers only those parts that are connected on boards I could test, plus those that are currently used by the IT8772F. The latter could be ported to use this driver if somebody minds to test it. Change-Id: I7a40f677f667d103ce1d09a3e468915729067803 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17284 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09superio/*: Relocate Kconfig to chip folder.Omar Pakker
This moves the Kconfig from the Super I/O manufacturer folder to the chip folder instead. This makes new chip commits self-contained unit as edits to the central Kconfig file are no longer required. Change-Id: I7aee07919f2ae9204850c669e0ed3cb17d4de8cd Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15973 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-10-27superio: Use 'pnp_devfn_t' over 'device_t' in romstage componentEdward O'Callaghan
The romstage component of Super I/O support is in fact written around passing a lower and upper half packed integer. We currently have two typedef's for this, 'device_t' and 'pnp_devfn_t'. We wish to make use of 'pnp_devfn_t' over 'device_t' as 'device_t' changes it's typedef in the ramstage context and so is really a conflicting definition. This helps solve problems down the road to having the 'real' 'device_t' definition usable in romstage later. This follows on from the rational given in: c2956e7 device/pci_early.c: Mixes up variants of a typedefs to 'u32' Change-Id: Ia9f238ebb944f9fe7b274621ee0c09a6de288a76 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6231 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-05-23ite/common: Introduce common watchdog and 3.3V VSB helpersRudolf Marek
Introduce the watchog and 3.3 VSB helper functions. The IT8712F can be migrated to use those too. To be used with IT8728F. Change-Id: If21e99b6069c7222f0bc8eb7c7121fe119b8dfe1 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/5728 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-11superio/ite/*: Factor out generic romstage componentEdward O'Callaghan
Following the reasoning of: cf7b498 superio/fintek/*: Factor out generic romstage component Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5585 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 04:54:14 +0000