summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Expand)Author
2013-03-14lynxpoint: Update device IDs and clock gating setupDuncan Laurie
2013-03-14lynxpoint: Add new GPIO interface for Lynxpoint-LPDuncan Laurie
2013-03-14lynxpoint: Add Kconfig entry for Low Power chipsetDuncan Laurie
2013-03-14lynxpoint: ME to BIOS Payload UpdatesAaron Durbin
2013-03-14lynx point: add new ME status informationAaron Durbin
2013-03-14haswell: remove GPIO60 memory reset gate on S3 transitionDuncan Laurie
2013-03-14haswell: remove explicit pcie config accessesAaron Durbin
2013-03-14lynxpoint: PMIR register renameAaron Durbin
2013-03-14lynxpoint: Management Engine UpdatesAaron Durbin
2013-03-14haswell: add PCI id supportAaron Durbin
2013-03-14lynxpoint: Update IOBP programming methodDuncan Laurie
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
2013-03-12AMD CIMx SB800: Enable AHCI mode for SATA controller by defaultPaul Menzel
2013-03-09Add Intel Panther Point USB3 initializationMarc Jones
2013-03-06AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperioJens Rottmann
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-28Use defines for some i82801ex/gx registersKyösti Mälkki
2013-02-27smm: Update rev 0x30101 SMM revision save stateAaron Durbin
2013-02-26Unify setting 82801a/b/c/d IOAPIC IDKyösti Mälkki
2013-02-25AMD Southbridge: Add RTC init to lpc_initMike Loptien
2013-02-23AMD/Persimmon: Add RTC init to CIMX SB800Mike Loptien
2013-02-21AMD S3: Introduce Kconfig variable 'S3_DATA_SIZE'Zheng Bao
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
2013-02-19build system: Retire REQUIRES_BLOBPatrick Georgi
2013-02-19AMD S3: Change S3_VOLATILE_POS to S3_DATA_POSZheng Bao
2013-02-18AMD S3: Fix typo vol*a*tile in southbridge KconfigZheng Bao
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
2013-02-11spi.h: Rename the spi.h to spi-generic.hZheng Bao
2013-01-22Hudson: Legacy free question is hudson onlyMartin Roth
2013-01-21Hudson: Cleanup - change SB800 references to hudsonMartin Roth
2013-01-21Hudson: Changes to support agesa/hudson for legacy freeMartin Roth
2013-01-21Hudson: Changes to agesa/hudson FADT for ACPI 3.0Martin Roth
2013-01-09Fix typo in SB800 Kconfig for IMC positionMartin Roth
2012-12-30rs780: Implement `rs780_internal_gfx_disable` and add .disable pcie_opsDenis 'GNUtoo' Carikli
2012-12-29Add AMD Hudson blobs by CONFIG_REQUIRES_BLOBS dependencyMarc Jones
2012-12-28USBDEBUG: Enable the EHCI in AMD SouthbridgeZheng Bao
2012-12-19No need to contact AMD for firmware anymorePatrick Georgi
2012-12-14AMD S3: Rename generated s3.rom for make cleanZheng Bao
2012-12-12SB800: Add IMC ROM and fan control.Martin Roth
2012-12-12Rename generated hudson_romsig.bin for make cleanMartin Roth
2012-12-12Fix SPI BAR special case in lpc_set_resourcesMartin Roth
2012-12-12Claim the SPI bus before writes if the IMC ROM is presentMartin Roth
2012-12-01Drop TINY_BOOTBLOCKKyösti Mälkki
2012-11-30AMD S3: Leverage the public SPI routineZheng Bao
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
2012-11-27Drop driver-y from GM45/ICH9/RK9Stefan Reinauer
2012-11-27Enable the FCH GPP port prior to device enumerationDave Frodin
2012-11-27Get rid of drivers classPatrick Georgi
2012-11-27intel/i82801ix: new southbridge, ICH9Patrick Georgi
2012-11-20Unify use of bool config variablesStefan Reinauer
2012-11-16Drop Kconfig variable BOARD_HAS_HARD_RESETStefan Reinauer
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
2012-11-14SMM: Fix save state searching for GSMIDuncan Laurie
2012-11-14SMM: Pass the ACPI GNVS pointer via state save mapDuncan Laurie
2012-11-14SMM: Avoid use of global variables in SMI handlerDuncan Laurie
2012-11-14SMM: Extract function for finding save state nodeDuncan Laurie
2012-11-14SMM: Restore GNVS pointer in the resume pathDuncan Laurie
2012-11-13Add Kconfig option to lock/unlock ME firmware during buildStefan Reinauer
2012-11-13SandyBridge/IvyBridge: Add IFD and ME firmware automaticallyStefan Reinauer
2012-11-12SPI: Add early romstage SPI driver using hardware sequencingDuncan Laurie
2012-11-12SPI: Fix and enable Fast Read supportDuncan Laurie
2012-11-12Add bd82x6x mainboards ASPM overrides.Marc Jones
2012-11-12SPI: Configure Software Sequence SPI Freq to match descriptorDuncan Laurie
2012-11-12SPI: Add Fast Read to the OPMENU for locked down SPIDuncan Laurie
2012-11-12Define post codes for OS boot and resumeDuncan Laurie
2012-11-12Pass correct sleep type to mainboard sleep handlerStefan Reinauer
2012-11-09PCH: Add register descriptions used by IGD OpRegionStefan Reinauer
2012-11-09Add IGD Opregion variables to NVSStefan Reinauer
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
2012-11-09SPI: re-init SMM SPI driver after lockdownDuncan Laurie
2012-11-08smi: make tseg_relocate check pointer offsetDuncan Laurie
2012-11-08elog: add extended management engine eventDuncan Laurie
2012-11-08spi: fix erase in SMM while SPIBAR is lockedDuncan Laurie
2012-11-07ELOG: Don't disable SPI controller lockdownDuncan Laurie
2012-11-07SPI: opmenu special case for WREN as atomic prefixDuncan Laurie
2012-11-07SMI: Change order of SMI_EN and PM1_EN initDuncan Laurie
2012-11-07Fix whitespace issue with help message in Kconfig fileDave Frodin
2012-11-02Fix some issues with new "reference" toolchainStefan Reinauer
2012-10-08hpet: common ACPI generationPatrick Georgi
2012-10-07Remove chip.h files without config structureKyösti Mälkki
2012-09-28AMD Hudson: Printf the high address as unsigned integerZheng Bao
2012-09-24AMD hudson: Round the float pointing number to integerZheng Bao
2012-09-19cimx sb700: change Platform.h to remove some warningsSiyuan Wang
2012-09-17AMD Hudson: use awk to calulate instead of exprZheng Bao
2012-08-30AMD S3: The offset of the nv storage depends on config.hZheng Bao
2012-08-28AMD hudson: Complete the missing ruleZheng Bao
2012-08-27SB700/SP5100: This configures the HPET clock period.Dave Frodin
2012-08-27AMD Hudson: Move the combining firmware from Python to sh.Zheng Bao
2012-08-22Auto-declare chip_operationsKyösti Mälkki
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
2012-08-07Sandy/Ivy Bridge and Cougar/Panther Point: Fix namesStefan Reinauer
2012-08-07bd82x6x: Add beep commandsDylan Reid
2012-08-06AMD RS690: mark MMCONF resource as reserved MEMKyösti Mälkki
2012-08-05AMD SB: Call the rtc update if needed (Propagation)zbao
2012-08-05AMD S3: Remove the hardcoded volatile positionzbao
2012-08-04Perform additional programming requirements for SATAStefan Reinauer
2012-08-02AMD hudson: Call the rtc update if needed.zbao
2012-08-02AMD K8 and AMDFAM10, GFXUMA: drop use of uma_memory_baseKyösti Mälkki
2012-07-30bd82x6x: Fix CONFIG_USBDEBUGSven Schnelle
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 06:58:09 +0000