summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Expand)Author
2014-02-20ibexpeak/thermal: set temperature target in early init.Vladimir Serbinenko
2014-02-19ibexpeak/lpc: Fix PCIIDs.Vladimir Serbinenko
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
2014-02-17vortex86ex: Drop baudrate programming for 10 UARTsKyösti Mälkki
2014-02-17ibexpeak/azalia: Remove C4-register extended init.Vladimir Serbinenko
2014-02-17ibexpeak/sata: Add PCI ID from Easynote LM.Vladimir Serbinenko
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
2014-02-12lynxpoint: Do not put SerialIO devices into D3Hot in ACPI modeDuncan Laurie
2014-02-11amd/cimx: fix sb(8|9)00 NULL type redefineAaron Durbin
2014-02-10usbdebug: Remove duplicate port claimKyösti Mälkki
2014-02-06uart8250: Drop includes in superioKyösti Mälkki
2014-02-06uart8250: Drop unused declarationsKyösti Mälkki
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
2014-02-06usbdebug: Drop obsolete codeKyösti Mälkki
2014-02-04AMD cimx/sb800: Set SPI frequency and prefetchKyösti Mälkki
2014-02-01AMD hudson and yangtze: add IMC fan control supportWANG Siyuan
2014-02-01ibexpeak: add smbus_write_byteVladimir Serbinenko
2014-02-01bd82x6x: Add smbus_write_byteVladimir Serbinenko
2014-01-23sandy/ivy SPI: Support hardware sequencing and use with multiple chipsVladimir Serbinenko
2014-01-23dmp/vortex86ex: Initialize I2C controller base address/IRQAndrew Wu
2014-01-23X201: Enable expresscard hotplug.Vladimir Serbinenko
2014-01-23nehalem: Fix SMRAM register addressVladimir Serbinenko
2014-01-23Ibexpeak: add missing thermal init.Vladimir Serbinenko
2014-01-22Lenovo X230: new portVladimir Serbinenko
2014-01-15AMD Hudson: show POST codes on a PCI deviceIdwer Vollering
2014-01-12ibexpeak / bd82x6x: Make SATA mode user-visible option.Vladimir Serbinenko
2014-01-12ibexpeak: Fix timings for IDE mode.Vladimir Serbinenko
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
2014-01-09bd82x6x/ibexpeak: Make DRAM reset gate GPIO configurableVladimir Serbinenko
2014-01-06usbdebug: Fix hidden menuconfig optionsKyösti Mälkki
2014-01-06nehalem: Simplify smi.c by using __SIMPLE_DEVICE__Vladimir Serbinenko
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
2013-12-27via: Write »access« without »m« at endPaul Menzel
2013-12-24Remove PCI_ROM_RUN optionVladimir Serbinenko
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
2013-12-22vortex86ex: Change PCI S/B resource reservation functions for more I/O devices.Andrew Wu
2013-12-21lynxpoint: XHCI: Don't put device in D3 in _PS0 MethodDuncan Laurie
2013-12-21lynxpoint: Fix an issue clearing port change status bitsDuncan Laurie
2013-12-21lynxpoint: XHCI: Advertise D3 as lowest wake stateDuncan Laurie
2013-12-21lynxpoint: Fix issues with XHCI initDuncan Laurie
2013-12-21lynxpoint: Route all USB ports to XHCI in finalize stepDuncan Laurie
2013-12-21lynxpoint: Move USB SMI sleep code to separate USB filesDuncan Laurie
2013-12-21lynxpoint: Add configuration option for SATA gen3 DTLE registersShawn Nematbakhsh
2013-12-21haswell: Misc updates from 1.6.1 ref codeDuncan Laurie
2013-12-21lynxpoint: Add devicetree config option to force enable ASPMDuncan Laurie
2013-12-21lynxpoint: me: Disable some verbose messagesDuncan Laurie
2013-12-21lynxpoint: me: Support ICC clock enables messageDuncan Laurie
2013-12-21lynxpoint: me: Allow for more than MKHI MEI messagesDuncan Laurie
2013-12-21lynxpoint: Avoid any ME device communication in S3 pathDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21lynxpoint xhci: Add ACPI D0/D3 workaroundsDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21lynxpoint: power management setup tweakDuncan Laurie
2013-12-21lynxpoint: Add LPT-LP device id and smbus_write_byteDuncan Laurie
2013-12-18lynxpoint: Don't write to non-existent EHCIDuncan Laurie
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
2013-12-07Correct file permissions.Idwer Vollering
2013-12-06usbdebug: Hide irrelevent options from menuconfigKyösti Mälkki
2013-12-05lynxpoint: Update LPT-LP PM settingsDuncan Laurie
2013-12-05lynxpoint: enable clock gatingAaron Durbin
2013-12-05lynxpoint: provide gpio_is_native()Aaron Durbin
2013-12-05lynxpoint: implement additional programming stepsStefan Reinauer
2013-12-05lynxpoint: disable pcie devices based on configAaron Durbin
2013-12-05intel/fsp_bd82x6x: Use correct type pointer for mainboard_smi_gpiAlexandru Gagniuc
2013-12-04Add Intel FSP bd82x6x southbridge supportMarc Jones
2013-12-03ibexpeak: ensure config compatibility with bd82x6xVladimir Serbinenko
2013-12-03lynxpoint: Fix LPT-LP PME_B0 bit offset in ACPI _PRW objectsDuncan Laurie
2013-12-02global: Fix usage of get_option() to make use of CB_CMOS_ codesAlexandru Gagniuc
2013-12-02lynxpoint: move all pcie device handling to pcie.cAaron Durbin
2013-12-02lynxpoint: expose pch_disable_devfn()Aaron Durbin
2013-12-02lynxpoint: expose iobp functionsAaron Durbin
2013-12-01lynxpoint: Do not clear ACPI NVS region on resumeDuncan Laurie
2013-11-30dmp/vortex86ex: Add timeout for keyboard system flag checking.Andrew Wu
2013-11-30ibexpeak: set HAVE_USBDEBUG_OPTIONSVladimir Serbinenko
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
2013-11-25lynxpoint: Enable USB clock gating, late setup, and sleep prepDuncan Laurie
2013-11-25lynxpoint: Add ACPI Method to enable GPIO as wake sourceDuncan Laurie
2013-11-25lynxpoint: Enable extra 16 IOAPIC entries for GPIO PIRQDuncan Laurie
2013-11-25lynxpoint: fix mem corruption during ssdt2 genAaron Durbin
2013-11-25lynxpoint: Fix XHCI controller device in ACPIDuncan Laurie
2013-11-25lynxpoint: Enable SerialIO clock in PCI modeDuncan Laurie
2013-11-25slippy: Enable EC SMIDuncan Laurie
2013-11-25lynxpoint: update azalia device idsAaron Durbin
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
2013-11-25lynxpoint: Expose ACPI Device for LP GPIO controllerDuncan Laurie
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
2013-11-25lynxpoint: Add missing ME MBP entriesDuncan Laurie
2013-11-25lynxpoint: export mem console pointer in ACPIAaron Durbin
2013-11-25lynxpoint: Updates to power management and clock gatingDuncan Laurie
2013-11-25Support for Ibexpeak southbridgeVladimir Serbinenko
2013-11-24haswell: Configure PCH power sharing for ULTDuncan Laurie
2013-11-24lynxpoint: Add a function to set an individual GPIODuncan Laurie
2013-11-24lynxpoint: Rework LP GPIO handlingDuncan Laurie
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
2013-11-24dmp/vortex86ex: Move DMP specific POST code defines into one fileAndrew Wu
2013-11-12AMD Hudson: Move function s3_resume_init_data to southbridgeZheng Bao
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 05:16:01 +0000