aboutsummaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Expand)Author
2011-11-10compile code for CONFIG_SOUTHBRIDGE_VIA_K8T800_OLDFlorian Zumbiehl
2011-11-10support for different location of HT registers in old version of K8T800Florian Zumbiehl
2011-11-08move function from header file to .c fileStefan Reinauer
2011-11-07rename vt8237r_cfg() to k8x8xx_vt8237r_cfg() and make publicly accessibleFlorian Zumbiehl
2011-11-07factor out common config for k8x8xx's dram_enable() and vt8237r_cfg()Florian Zumbiehl
2011-11-07add support for 1106:3188 (host controller of the old version of k8t800)Florian Zumbiehl
2011-11-07in vt8237r_enable(), write function enables only to ISA bridge config spaceFlorian Zumbiehl
2011-11-04Revert "add support for 1106:3188 (host controller of the old version of k8t8...Patrick Georgi
2011-11-03add support for writing to SMBus with vt8237Florian Zumbiehl
2011-11-03add support for 1106:3188 (host controller of the old version of k8t800)Florian Zumbiehl
2011-11-01remove trailing whitespaceStefan Reinauer
2011-10-31Fix usb debug dongle supportSven Schnelle
2011-10-30Fix gcc 4.6.1 breakage of southbridge/amd/sr5650/pcie.c.Stefan Reinauer
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
2011-10-28sb600: Implement EHCI workaroundPatrick Georgi
2011-10-27Added smbus block read/write for amd8111Oskar Enoksson
2011-10-27i82801gx: Fix port status in AHCI modeSven Schnelle
2011-10-25i82801gx: Add setting for C4onC3 modeSven Schnelle
2011-10-25i82801gx: Add write and read/write block functionsSven Schnelle
2011-10-23i82801gx: Don't set I/O base address to static valueSven Schnelle
2011-10-23SB800: Hide unused gpp portsKerry Sheh
2011-10-21sch: strip quotes around cmc.bin filenamePatrick Georgi
2011-10-20i82801dx: Replace romstage printk'sKyösti Mälkki
2011-10-15AMD CPU and chipset fixes for compilation with gcc 4.6Stefan Reinauer
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
2011-10-14Fix AMD SB800 (cimx) southbridge code to compile with gcc 4.6Stefan Reinauer
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
2011-10-13amd/sb600: Enable COM2 at all times in early setupPatrick Georgi
2011-10-12SB800 RAID: add kconfig option RAID_MISC_ROM_POSITIONKerry Sheh
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
2011-10-12sb800: Add Kconfig option ENABLE_IDE_COMBINED_MODEKerry Sheh
2011-10-11mainboard: complete the sb800 devicetree even device is offKerry Sheh
2011-10-11sb800: Add sata ahci/raid mode kconfig optionKerry Sheh
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
2011-09-15AMD SB800 early console use fixefdesign98
2011-09-14rs780: hide unused gfx ports and gpp portsKerry Sheh
2011-09-12Add acpi_get_sleep_type() to i82371eb and P2B _PTS/_WAK methodsTobias Diedrich
2011-09-07AMD SB800 southbridge updateKerry She
2011-09-07AMD F14 southbridge updateKerry She
2011-09-04Adjust some code/comment of sb700 sata initWang Qing Pei
2011-07-22Update AMD SR5650 and SB700efdesign98
2011-07-14Move AMD SB800 early clock setup.Scott Duplichan
2011-07-14Set SB800 ROM decode size based on kconfig.Marc Jones
2011-06-30Improve VIA K8M890 HT settings. Use recommended settings for ROMSIP andRudolf Marek
2011-06-29i82801gx: read RTC status register to prevent IRQ stormSven Schnelle
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
2011-06-20sb800: move spi prefetch and fast read mode to sb bootblock.Stefan Reinauer
2011-06-19ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nicScott Duplichan
2011-06-15SMM: don't overwrite SMM memory on resumeSven Schnelle
2011-06-15i82801gx: replace cafed00d/cafebabe by definesSven Schnelle
2011-06-10Add ACPI automatic PIC/APIC interrupt routing logic for ck804Jonathan A. Kollasch
2011-06-09Revert changes to set the sb800 to AHCI mode.Marc Jones
2011-06-07i82801gx: enable ACPI during S3 resumeSven Schnelle
2011-06-07SMM: add defines for APM_CNT registerSven Schnelle
2011-06-07re-indent, so files conform to coding guidelines.Stefan Reinauer
2011-06-06SMM: add mainboard_apm_cnt() callbackSven Schnelle
2011-06-04vt8237r: Simplify bootblock init to work around nested if() romcc problemPeter Stuge
2011-06-01trivial remove blanks at the end of lineKerry She
2011-06-01This patch fix a AMD sb800 wrapper compile warning:Kerry She
2011-05-23Correct implementation of r6608.Jonathan Kollasch
2011-05-22Ensure ck804 romstrap is 16-byte aligned.Jonathan Kollasch
2011-05-16cimx_wrapper/sb800: Fix indent in late.c:sb800_enable()Peter Stuge
2011-05-15Update gpp port configuration.Scott Duplichan
2011-05-15Program the I/O APIC ID.Scott Duplichan
2011-05-15Enable AHCI mode and hide IDE controller to reduce boot time.Scott Duplichan
2011-05-15Configure CIMx to use 33 MHz fast mode for SPD read.Scott Duplichan
2011-05-07RS780 DDI Lanes configure support,Kerry She
2011-05-07SB800 CIMX code can share the AGESA V5 lib code,Kerry She
2011-05-03i82801gx: enable SPI prefetchingSven Schnelle
2011-04-21more ifdef -> if fixes.Stefan Reinauer
2011-04-21more ifdef -> if fixesStefan Reinauer
2011-04-21some ifdef --> if fixesStefan Reinauer
2011-04-20drop dead code from sb800 bootblockStefan Reinauer
2011-04-20pci1x2x: remove latency/bridge control/cacheline size settingsSven Schnelle
2011-04-20pci1x2x: use cardbus_read_resources()/cardbus_enable_resources()Sven Schnelle
2011-04-20pci1x2x: use pci_ops set_subsystem instead of custom codeSven Schnelle
2011-04-20pci1x2x: add PCI1510 device IDsSven Schnelle
2011-04-20pci1x2x: use devicetree register configurationSven Schnelle
2011-04-20drop dead uart init code.Stefan Reinauer
2011-04-19Fix compilation of all i82371eb boards when ACPI tables aren't generatedIdwer Vollering
2011-04-19Fix some more misuses of ifdef/if definedStefan Reinauer
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
2011-04-14drop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused CONFIG_ARCHStefan Reinauer
2011-04-14nvidia mcp55: drop unused dbg_info Stefan Reinauer
2011-04-14cosmetic cleanup of sis966 usb2 code Stefan Reinauer
2011-04-12Use TOM2 for highest sysmem setting for northbound memory routing (DMA). This...Marc Jones
2011-04-11Unify use of post_codeAlexandru Gagniuc
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
2011-04-01ICH7: Fix register naming errorSven Schnelle
2011-03-28Add the SR5650 & SP5100 to the Kconfig and Makefile.incZheng Bao
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
2011-03-27Add AMD SR56x0 support.Zheng Bao
2011-03-17Fix power_on_after_fail handling on AMD SB600Josef Kellermann
2011-03-03Improve ck804 IOAPIC and HPET resource handling.Jonathan Kollasch
2011-03-02Fixes licensing of src/southbridge/via/k8t890/k8x8xx.h to GPLv2+ from GPLv3.Alexandru Gagniuc
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
2011-02-28add functions to set Subsystem Vendor/Device to rl5c746Sven Schnelle
2011-02-26It adds support for automatic PSS object generation for AMD pre fam Fh CPU. T...Rudolf Marek
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 21:17:54 +0000