summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Expand)Author
2012-05-12Add legacy free setting and override to fadt.cMarc Jones
2012-05-12Merge sb800 fadt fixes from South Station mainboard to southbridge fadt.Marc Jones
2012-05-10Add SPI flash driverStefan Reinauer
2012-05-10Unmark source files as executablesAlec Ari
2012-05-09Move fadt.c to the cimx sb800 southbridge directory to be shared.Marc Jones
2012-05-09Add simple PMIO & PMIO2 read/write routines to CIMX wrapperMartin Roth
2012-05-08Some more #if cleanupPatrick Georgi
2012-05-08Clean up #ifsPatrick Georgi
2012-05-01Fix issue with PCIe power management setupDuncan Laurie
2012-05-01Add an option to enable PCIe root port coalescingDuncan Laurie
2012-05-01Update PCIe Root Port _PRT to handle re-mapped functionsDuncan Laurie
2012-05-01Fix SATA port map to only enable port 0Stefan Reinauer
2012-05-01Don't disable ACPI in the S3 resume pathDuncan Laurie
2012-05-01add new LPC controller device ID valueVadim Bendebury
2012-05-01Allow device ID arrays in the PCI driver structureVadim Bendebury
2012-04-27Cougar Point southbridge: Add includes and drop post_code()Stefan Reinauer
2012-04-27SMM: unify mainboard APM command handlersStefan Reinauer
2012-04-24Intel 82801dx: compile early_smbus as separate objectKyösti Mälkki
2012-04-20Refactor some alignment handlingPatrick Georgi
2012-04-19Do not produce temp s3.rom if the board doesn't need it.zbao
2012-04-17More portable s3 scratch space creationPatrick Georgi
2012-04-12Add Southbridge support for S3.zbao
2012-04-12Unify IO APIC address specificationPatrick Georgi
2012-04-04Add support for Intel Panther Point PCHStefan Reinauer
2012-04-02Add sb800 spi support.zbao
2012-03-27Add support for RDC R8610 SouthbridgeRudolf Marek
2012-03-24i82801gx: Support power-on-after-power-fail betterPatrick Georgi
2012-03-24i82801gx: Use CMOS variable if available for power-on on power failurePatrick Georgi
2012-03-16VIA southbridge K8T890: Apply un-written naming rulesKyösti Mälkki
2012-03-07Move C labels to start-of-linePatrick Georgi
2012-02-29AMD southbridge: remove sp5100Kyösti Mälkki
2012-02-22amd/sb600: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-20Force SB600 bootblock to use I/O for PCI configDave Frodin
2012-02-20Force SB700 bootblock code to use I/O for PCI config cycles.Dave Frodin
2012-02-20Force SB800 bootblock to use I/O for PCI configDave Frodin
2012-02-20Fixes Fam10/SR5650 cpu not recognized message.Dave Frodin
2012-02-17nvidia/mcp55: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17intel/i82801cx: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17sis/sis966: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17intel/i82801ex: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17intel/sch: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17amd/sb800: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17Avoid ../../.. paths in ASL filesPatrick Georgi
2012-02-17Remove whitespace.Patrick Georgi
2012-02-17amd/amd8111: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-17intel/82801dx: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-16SB700 southbridge: AMD SB700/SP5100 southbridge CIMX wrapperKerry Sheh
2012-02-02i3100: configure pci irqsSven Schnelle
2012-02-02CIMX wrapper: remove redudant traversing sb800 and sb900 CIMX dirKerry Sheh
2012-01-31i3100: add sata_ports_implemented optionSven Schnelle
2012-01-31i3100: Add init sequenceSven Schnelle
2012-01-18Add subsystem callbacks for VT8237x and VT890 family of chipsetsRudolf Marek
2012-01-18Unify ID_SECTION_OFFSET and mark it deprecatedPatrick Georgi
2012-01-10Add missing HAVE_HARD_RESETSven Schnelle
2012-01-08rs780: correct comment in switching_gpp_configurations()Jonathan A. Kollasch
2012-01-05rs780: use bitwise rather than boolean notJonathan A. Kollasch
2012-01-05rs780: power down GPPSB SB lane pads in correct PCIe coreJonathan A. Kollasch
2011-12-21Persimmon audio codec verb patch.Marc Jones
2011-12-06Fix AMD 8132 and 8151 southbridge buildsKyösti Mälkki
2011-12-05RS780: print the vgainfoDenis 'GNUtoo' Carikli
2011-12-02make GPIOs and misc configurable via devicetreeFlorian Zumbiehl
2011-12-02make INT[EFGH]# of vt8237 configurable as gpio via devicetreeFlorian Zumbiehl
2011-12-02some black magic for initializing the old version of the k8t800Florian Zumbiehl
2011-12-02implement usb2 termination and dpll delay setting for vt8237rFlorian Zumbiehl
2011-12-02i3100: Add HAVE_HARD_RESETSven Schnelle
2011-11-24vt8237: add support for setting the power state after loss of powerFlorian Zumbiehl
2011-11-10compile code for CONFIG_SOUTHBRIDGE_VIA_K8T800_OLDFlorian Zumbiehl
2011-11-10support for different location of HT registers in old version of K8T800Florian Zumbiehl
2011-11-08move function from header file to .c fileStefan Reinauer
2011-11-07rename vt8237r_cfg() to k8x8xx_vt8237r_cfg() and make publicly accessibleFlorian Zumbiehl
2011-11-07factor out common config for k8x8xx's dram_enable() and vt8237r_cfg()Florian Zumbiehl
2011-11-07add support for 1106:3188 (host controller of the old version of k8t800)Florian Zumbiehl
2011-11-07in vt8237r_enable(), write function enables only to ISA bridge config spaceFlorian Zumbiehl
2011-11-04Revert "add support for 1106:3188 (host controller of the old version of k8t8...Patrick Georgi
2011-11-03add support for writing to SMBus with vt8237Florian Zumbiehl
2011-11-03add support for 1106:3188 (host controller of the old version of k8t800)Florian Zumbiehl
2011-11-01remove trailing whitespaceStefan Reinauer
2011-10-31Fix usb debug dongle supportSven Schnelle
2011-10-30Fix gcc 4.6.1 breakage of southbridge/amd/sr5650/pcie.c.Stefan Reinauer
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
2011-10-28sb600: Implement EHCI workaroundPatrick Georgi
2011-10-27Added smbus block read/write for amd8111Oskar Enoksson
2011-10-27i82801gx: Fix port status in AHCI modeSven Schnelle
2011-10-25i82801gx: Add setting for C4onC3 modeSven Schnelle
2011-10-25i82801gx: Add write and read/write block functionsSven Schnelle
2011-10-23i82801gx: Don't set I/O base address to static valueSven Schnelle
2011-10-23SB800: Hide unused gpp portsKerry Sheh
2011-10-21sch: strip quotes around cmc.bin filenamePatrick Georgi
2011-10-20i82801dx: Replace romstage printk'sKyösti Mälkki
2011-10-15AMD CPU and chipset fixes for compilation with gcc 4.6Stefan Reinauer
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
2011-10-14Fix AMD SB800 (cimx) southbridge code to compile with gcc 4.6Stefan Reinauer
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
2011-10-13amd/sb600: Enable COM2 at all times in early setupPatrick Georgi
2011-10-12SB800 RAID: add kconfig option RAID_MISC_ROM_POSITIONKerry Sheh
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
2011-10-12sb800: Add Kconfig option ENABLE_IDE_COMBINED_MODEKerry Sheh
2011-10-11mainboard: complete the sb800 devicetree even device is offKerry Sheh
2011-10-11sb800: Add sata ahci/raid mode kconfig optionKerry Sheh
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 14:10:24 +0000