| Age | Commit message (Collapse) | Author |
|---|
|
Fix some compiler warnings due to pointer to integer conversions
with different size.
Required for 64bit ramstage.
Change-Id: Ibfb3cacf25adfb4a242d38e4ea290fdc3929a684
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/29875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Now that all targets featuring these southbridges use SMM_TSEG these
files are unused.
Change-Id: Ic3a1d790f3595e98a8d33e6e8274cb72ad356a89
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30018
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of ELOG_GSMI_APM_CNT use APM_CNT_ELOG_GSMI and define it in
cpu/x86/smm.h
Change-Id: I3a3e2f823c91b475d1e15b8c20e9cf5f3fd9de83
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30022
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Removes a warning in Linux about FACP.
Change-Id: Ia12302a4dcd34eacdcc8ae16bd39e951e616c6ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
All Lynx Point board select this, and none build without it.
Change-Id: I4b59b10ee985cff5a8e1442677d36b0be88cf437
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/29992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The common finalise code is used by bd82x6x, Lynx Point, and Ibex Peak.
Lynx Point now benefits from being able to write-protect the flash chip.
For Lynx Point, writing the SPI OPMENU now happens in ramstage, as done
in bd82x6x.
Tested on an ASRock H81M-HDS (Lynx Point). When write-protection is
configured, flashrom reports all flash regions as read-only, and does
not manage to alter the contents of the flash chip.
Also tested on an ASUS P8H61-M LX (Cougar Point). Everything seems to
work as before.
Change-Id: I781082b1ed507b00815d1e85aec3e56ae5a4bef2
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/29977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The finalise handler is not called during S3 resume when using the
`BS_PAYLOAD_BOOT` approach. So, adopt the `lpc_final` approach used by
bd82x6x and others.
Tested on an ASRock H81M-HDS. The finalise handler is now called on
the normal boot path, and during S3 resume.
Change-Id: I9766a8dcbcb38420e937c810d252fef071851e92
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/29976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The ASRock H81M-HDS doesn't implement a finalise handler. To fix
this, and reduce code duplication in the process, make a common
implementation. There should be no functional change to boards with
existing finalise handlers, since the code is identical among them and
the new, common implementation.
Tested on an ASRock H81M-HDS. The finalise handler works.
Change-Id: I13b581a2219288019a4e0c9e618db3ac7c3c15ab
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/29975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use of device_t is deprecated.
Change-Id: Ie75450c844e2317ded157465eb0fc6a9ec1b3ab0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29932
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All i82801gx targets now use SMM_TSEG.
Change-Id: Ib4e6974088a685290ed1dddf5228a99918744124
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/25599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This also caches the TSEG region and therefore increases MTRR usage
a little in some cases.
Currently SMRR msr's are not set on model_1067x and model_6fx since
this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL.
This will be handled properly in the subsequent parallel mp init
patchset.
Tested on Intel DG41WV, resume from S3 still works fine.
Change-Id: I317c5ca34bd38c3d42bf0d4e929b2a225a8a82dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/25597
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the common SMM_TSEG code to relocate the smihandler to TSEG.
This also caches the TSEG region and therefore increases MTRR usage a
little in some cases.
This fixes S3 resume being broken introduced by CB:25594
"sb/intel/i82801gx: Use common Intel SMM code".
Currently SMRR msr's are not set on model_1067x and model_6fx since
this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL.
This will be handled properly in the subsequent parallel mp init
patchset.
Tested on Intel d945gclf and Lenovo Thinkpad X60.
Change-Id: I0e6374746c3df96ce16f1c4a177af12747d6c1a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/25595
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the common Intel code to set up smm and the smihandler.
This is expected to break S3 resume and other smihandler related
functionality as this code is meant to be used with CONFIG_SMM_TSEG.
The platform (x4x) using this southbridge will adapt
the CONFIG_SMM_TSEG codepath in subsequent patches.
Change-Id: Id3b3b3abbb3920d68d77fd7db996a1dc3c6b85a3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/25596
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some tables updated to comply with ACPI version 6.2a.
Change-Id: I91291c8202d1562b720b9922791c6282e572601f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I08ed67dd7159f8a407d61c9b5fc69ff6aef10057
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29843
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie06ae528ade3e06ae880b488628692ce43c30f5a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29845
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6b9e0e0c643f9b47cfe8bdfffbe247f477ace685
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use the common Intel code to set up smm and the smihandler. This is
expected to break S3 resume and other smihandler related
functionality as this code is meant to be used with
CONFIG_SMM_TSEG. Platforms (i945, pineview, x4x) using this
southbridge will adapt the CONFIG_SMM_TSEG codepath in subsequent
patches.
Tested on Intel D945GCLF, still boots fine but breaks S3 resume
support because it hangs on SMI.
Change-Id: If7016a3b98fc5f14c287ce800325084f9dc602a0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/25594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ife8f7f164b26bea65a0dcde0cab339a1bb599e38
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan T <stefan.tauner@gmx.at>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I4e5fe3ff083f2d0db1cfde16550b57537d5f7262
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/c/28349
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove whitespace between the function name and open
parenthesis, and fix 81+ characters lines.
Unnecessary comment about 'include sandybridge.h'removed.
Change-Id: I0db1263ec11240003fe1f7080c758994fc0224d3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29428
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make sure that the Pre-Op register is cleared when an atomic cycle has
been finished without errors.
Change-Id: Ied88337125b125474b411e2f39f668171d15bfac
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
* Remove FSP Sandy/Ivybrige which are unused.
* Open Source implementation isn't final but
good enough to replace FSP version.
* For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE
and NORTHBRIDGE_INTEL_SANDYBRIDGE
Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/29402
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib621fe01a1d1d026153124a9d46f26e31df6d818
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ic9bca9a56663926a153b93c298f69ba7d26f6e5e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29302
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29303
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The function `acpi_fill_fadt()` is based on that of sb/intel/bd82x6x.
Tested on an ASRock H81M-HDS and a Google Peppy board, both using Linux
4.9 with `acpi=strict`. No ACPI errors or warnings appear in the kernel
log. System reset, poweroff, and S3 suspend/resume continue to work.
General improvements
--------------------
- `fadt->preferred_pm_profile` is set based on the value of
`CONFIG_SYSTEM_TYPE_LAPTOP` instead of being hardcoded.
- Constants are used instead of magic values in more locations.
- `fadt->gpe0_blk`, `fadt->gpe0_blk_len`, and `fadt->x_gpe0_blk` are set
appropriately depending on whether the system uses Lynx Point LP or
not.
- Boards can indicate docking support in the FADT via the devicetree.
Changes to existing Lynx Point boards
-------------------------------------
- `header->asl_compiler_revision` changes from 1 to 0.
- `fadt->model` is left at 0 instead of being set to 1. This field is
only needed for ACPI 1.0 compatibility.
- `fadt->flush_size` and `fadt->flush_stride` are set to 0. This is
because their values are ignored, since `ACPI_FADT_WBINVD` is set in
`fadt->flags`.
- `fadt->duty_offset` is set to 0 instead of 1. None of the existing
boards indicate support for changing the processor duty cycle (as
`fadt->duty_width` is set to 0), so `fadt->duty_offset` does not
currently need to be set.
- Access sizes of registers are set.
- On mb/intel/baskingridge, the pmbase is now read using the common
function `get_pmbase()` instead of `pci_read_config16(...)`.
- On mb/intel/baskingridge, the value of `fadt->x_gpe0_blk.bit_width`
changes from 64 to 128. The correct value should be 128 (bits), to
match `fadt->gpe0_blk_len`, which is set to 16 (bytes).
- On Lynx Point LP systems, the unused extended address
`fadt->x_gpe0_blk` sets its address space ID to be consistent with
other unused extended addresses. Such a change should not alter the
interpretation of the registers as being unused. Why not set them all
to zero? Simply because the existing practice, in both coreboot and
some other vendors' firmware, has them set in such a case.
A diff of the FADT from a Google Peppy board is below:
--- pre/facp.dsl 2018-10-30 20:14:52.676570798 +1300
+++ post/facp.dsl 2018-10-30 20:15:06.904381436 +1300
@@ -1,179 +1,179 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180810 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
- * Disassembly of facp.dat, Tue Oct 30 20:14:52 2018
+ * Disassembly of facp.dat, Tue Oct 30 20:15:06 2018
*
* ACPI Data Table [FACP]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
[004h 0004 4] Table Length : 000000F4
[008h 0008 1] Revision : 04
-[009h 0009 1] Checksum : 61
+[009h 0009 1] Checksum : 6E
[00Ah 0010 6] Oem ID : "CORE "
[010h 0016 8] Oem Table ID : "COREBOOT"
[018h 0024 4] Oem Revision : 00000000
[01Ch 0028 4] Asl Compiler ID : "CORE"
-[020h 0032 4] Asl Compiler Revision : 00000001
+[020h 0032 4] Asl Compiler Revision : 00000000
[024h 0036 4] FACS Address : 7BF46240
[028h 0040 4] DSDT Address : 7BF46280
-[02Ch 0044 1] Model : 01
+[02Ch 0044 1] Model : 00
[02Dh 0045 1] PM Profile : 02 [Mobile]
[02Eh 0046 2] SCI Interrupt : 0009
[030h 0048 4] SMI Command Port : 000000B2
[034h 0052 1] ACPI Enable Value : E1
[035h 0053 1] ACPI Disable Value : 1E
[036h 0054 1] S4BIOS Command : 00
[037h 0055 1] P-State Control : 00
[038h 0056 4] PM1A Event Block Address : 00001000
[03Ch 0060 4] PM1B Event Block Address : 00000000
[040h 0064 4] PM1A Control Block Address : 00001004
[044h 0068 4] PM1B Control Block Address : 00000000
[048h 0072 4] PM2 Control Block Address : 00001050
[04Ch 0076 4] PM Timer Block Address : 00001008
[050h 0080 4] GPE0 Block Address : 00001080
[054h 0084 4] GPE1 Block Address : 00000000
[058h 0088 1] PM1 Event Block Length : 04
[059h 0089 1] PM1 Control Block Length : 02
[05Ah 0090 1] PM2 Control Block Length : 01
[05Bh 0091 1] PM Timer Block Length : 04
[05Ch 0092 1] GPE0 Block Length : 20
[05Dh 0093 1] GPE1 Block Length : 00
[05Eh 0094 1] GPE1 Base Offset : 00
[05Fh 0095 1] _CST Support : 00
[060h 0096 2] C2 Latency : 0001
[062h 0098 2] C3 Latency : 0057
-[064h 0100 2] CPU Cache Size : 0400
-[066h 0102 2] Cache Flush Stride : 0010
-[068h 0104 1] Duty Cycle Offset : 01
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
[069h 0105 1] Duty Cycle Width : 00
[06Ah 0106 1] RTC Day Alarm Index : 0D
[06Bh 0107 1] RTC Month Alarm Index : 00
[06Ch 0108 1] RTC Century Index : 00
[06Dh 0109 2] Boot Flags (decoded below) : 0003
Legacy Devices Supported (V2) : 1
8042 Present on ports 60/64 (V2) : 1
VGA Not Present (V4) : 0
MSI Not Supported (V4) : 0
PCIe ASPM Not Supported (V4) : 0
CMOS RTC Not Present (V5) : 0
[06Fh 0111 1] Reserved : 00
[070h 0112 4] Flags (decoded below) : 00008CAD
WBINVD instruction is operational (V1) : 1
WBINVD flushes all caches (V1) : 0
All CPUs support C1 (V1) : 1
C2 works on MP system (V1) : 1
Control Method Power Button (V1) : 0
Control Method Sleep Button (V1) : 1
RTC wake not in fixed reg space (V1) : 0
RTC can wake system from S4 (V1) : 1
32-bit PM Timer (V1) : 0
Docking Supported (V1) : 0
Reset Register Supported (V2) : 1
Sealed Case (V3) : 1
Headless - No Video (V3) : 0
Use native instr after SLP_TYPx (V3) : 0
PCIEXP_WAK Bits Supported (V4) : 0
Use Platform Timer (V4) : 1
RTC_STS valid on S4 wake (V4) : 0
Remote Power-on capable (V4) : 0
Use APIC Cluster Model (V4) : 0
Use APIC Physical Destination Mode (V4) : 0
Hardware Reduced (V5) : 0
Low Power S0 Idle (V5) : 0
[074h 0116 12] Reset Register : [Generic Address Structure]
[074h 0116 1] Space ID : 01 [SystemIO]
[075h 0117 1] Bit Width : 08
[076h 0118 1] Bit Offset : 00
-[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[077h 0119 1] Encoded Access Width : 01 [Byte Access:8]
[078h 0120 8] Address : 0000000000000CF9
[080h 0128 1] Value to cause reset : 06
[081h 0129 2] ARM Flags (decoded below) : 0000
PSCI Compliant : 0
Must use HVC for PSCI : 0
[083h 0131 1] FADT Minor Revision : 00
[084h 0132 8] FACS Address : 000000007BF46240
[08Ch 0140 8] DSDT Address : 000000007BF46280
[094h 0148 12] PM1A Event Block : [Generic Address Structure]
[094h 0148 1] Space ID : 01 [SystemIO]
[095h 0149 1] Bit Width : 20
[096h 0150 1] Bit Offset : 00
-[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[097h 0151 1] Encoded Access Width : 02 [Word Access:16]
[098h 0152 8] Address : 0000000000001000
[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
[0A0h 0160 1] Space ID : 01 [SystemIO]
[0A1h 0161 1] Bit Width : 00
[0A2h 0162 1] Bit Offset : 00
[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
[0A4h 0164 8] Address : 0000000000000000
[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
[0ACh 0172 1] Space ID : 01 [SystemIO]
[0ADh 0173 1] Bit Width : 10
[0AEh 0174 1] Bit Offset : 00
-[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0AFh 0175 1] Encoded Access Width : 02 [Word Access:16]
[0B0h 0176 8] Address : 0000000000001004
[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
[0B8h 0184 1] Space ID : 01 [SystemIO]
[0B9h 0185 1] Bit Width : 00
[0BAh 0186 1] Bit Offset : 00
[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
[0BCh 0188 8] Address : 0000000000000000
[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
[0C4h 0196 1] Space ID : 01 [SystemIO]
[0C5h 0197 1] Bit Width : 08
[0C6h 0198 1] Bit Offset : 00
-[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C7h 0199 1] Encoded Access Width : 01 [Byte Access:8]
[0C8h 0200 8] Address : 0000000000001050
[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
[0D0h 0208 1] Space ID : 01 [SystemIO]
[0D1h 0209 1] Bit Width : 20
[0D2h 0210 1] Bit Offset : 00
-[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D3h 0211 1] Encoded Access Width : 03 [DWord Access:32]
[0D4h 0212 8] Address : 0000000000001008
[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
-[0DCh 0220 1] Space ID : 00 [SystemMemory]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
[0DDh 0221 1] Bit Width : 00
[0DEh 0222 1] Bit Offset : 00
[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
[0E0h 0224 8] Address : 0000000000000000
[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
[0E8h 0232 1] Space ID : 01 [SystemIO]
[0E9h 0233 1] Bit Width : 00
[0EAh 0234 1] Bit Offset : 00
[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
[0ECh 0236 8] Address : 0000000000000000
Change-Id: I9638bb5ff998518eb750e3e7e85b51cdaf1f070e
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29387
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ifae9d67bbba57b30ee9a2f31c448efcb27981c57
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Value stored to 'cmd' is never read
Change-Id: I794b6e12f5af272705cd996f7ca5099e9b9dbfc7
Found-by: scan-build from clang 6
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/29568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I478a59534ec997947855eb0ff228a0dd9e15a5a5
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/29567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
* Move all implementations to into common folder.
* Add rtc.c for rtc based functions
Allows all Intel based platforms to use VBOOT_VBNV_CMOS.
Change-Id: Ia494e6d418af6f907c648376674776c54d95ba71
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/29427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. Change the pointers
or add parenthesis to force a proper order that will not cause compile
errors if compiled with a different compiler, and more importantly, don't
have unsuspected side effects.
BUG=b:118484178
TEST=Build AMD Bettong.
Change-Id: I4167c7eeb9339937b064e81e615ceb65f4689082
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I2b3168c600a81502f9cd1ff3203c492cf026e532
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I0668b73cd3a5bf5220af55c29785220b77eb5259
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29103
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After a {break,return}, "else" is generally not needed.
Change-Id: I6145424ef8ffe6854c18c1d885f579d37853a70c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29267
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The function `acpi_fill_madt()` is identical among all the Lynx Point
boards and sb/intel/bd82x6x, so share a common function between them.
Earlier Intel platforms have similar implementations of this function.
The common implementation might only need minor alterations to support
them.
Tested on an ASRock H81M-HDS and Google Peppy (variant of Slippy). No
issues arose from this patch.
Change-Id: Ife9e3917febf43d8a92cac66b502e2dee8527556
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file
that does not already include <stdint.h>, compilation errors result.
Adding the necessary <stdint.h> inclusions fixes compilation for an
ASRock H81M-HDS.
Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The platform.asl file is copied from sb/intel/bd82x6x, and also matches
the contents deleted from each mainboard's platform.asl.
Tested on an ASRock H81M-HDS and a Google Peppy board (variant of
Slippy). No issues arose from this patch.
Change-Id: I539e401ce9af83070f69147526ca3b1c122f042c
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The super I/O setup needs to be done after the LPC is enabled. For
Lynx Point, configuring the super I/O in `mainboard_romstage_entry()`
is too early to get a serial console output. To remedy this, add a
function `mainboard_config_superio()` that will be called at the
appropriate time, and can be overridden by mainboard code.
Change-Id: Iaf4188a17533c636e7b0c7efa220bc6a25876dda
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch is based on a8a9f34e9b7b ("sb/intel/i82801{g,j}x:
Automatically generate ACPI PIRQ tables")
Tested on an ASRock H81M-HDS. The generated _PRT object looks correct,
and the system doesn't show any issue when running. The following
assignments occur:
ACPI_PIRQ_GEN: PCI: 00:02.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:03.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:14.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:16.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1a.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1b.0: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1c.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1c.1: pin=1 pirq=1
ACPI_PIRQ_GEN: PCI: 00:1c.2: pin=2 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1c.3: pin=3 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1d.0: pin=0 pirq=7
ACPI_PIRQ_GEN: PCI: 00:1f.2: pin=1 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1f.3: pin=2 pirq=2
Also tested on a Google Peppy board. The following assignments occur:
ACPI_PIRQ_GEN: PCI: 00:02.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:03.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:14.0: pin=0 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1b.0: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1c.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1d.0: pin=0 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1f.2: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1f.3: pin=1 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1f.6: pin=2 pirq=1
A diff of the _PRT object for the Google Peppy board is below. The code
used in the diff has been modified for clarity, but the semantics remain
the same. To summarise the diff:
* The disabled PCIe root ports are no longer included.
* The LPC controller is no longer included, as it has no interrupt pin.
The pins for the remaining LPC devices are each one less. Perhaps the
original _PRT object was incorrect?
* The SDIO device is no longer included, as it is disabled.
* The Serial IO devices are no longer included, but that is due to a
separate issue I am having with this system (the devices don't show up
under Linux regardless of this patch). In short: their omission is not
a fault of this patch.
--- pre/_PRT
+++ post/_PRT
@@ -1,301 +1,157 @@
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
If (PICM)
{
- Return (Package (0x12)
+ Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
Zero,
Zero,
0x10
},
Package (0x04)
{
0x0003FFFF,
Zero,
Zero,
0x10
},
Package (0x04)
{
0x0014FFFF,
Zero,
Zero,
0x12
},
Package (0x04)
{
0x001BFFFF,
Zero,
Zero,
0x16
},
Package (0x04)
{
0x001CFFFF,
Zero,
Zero,
0x10
},
- Package (0x04)
- {
- 0x001CFFFF,
- One,
- Zero,
- 0x11
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x02,
- Zero,
- 0x12
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x03,
- Zero,
- 0x13
- },
-
Package (0x04)
{
0x001DFFFF,
Zero,
Zero,
0x13
},
Package (0x04)
{
0x001FFFFF,
Zero,
Zero,
0x16
},
Package (0x04)
{
0x001FFFFF,
One,
Zero,
0x12
},
Package (0x04)
{
0x001FFFFF,
0x02,
Zero,
0x11
- },
-
- Package (0x04)
- {
- 0x001FFFFF,
- 0x03,
- Zero,
- 0x10
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- Zero,
- Zero,
- 0x14
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- One,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x02,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x03,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0017FFFF,
- Zero,
- Zero,
- 0x17
}
})
}
Else
{
- Return (Package (0x12)
+ Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
Zero,
^LPCB.LNKA,
Zero
},
Package (0x04)
{
0x0003FFFF,
Zero,
^LPCB.LNKA,
Zero
},
Package (0x04)
{
0x0014FFFF,
Zero,
^LPCB.LNKC,
Zero
},
Package (0x04)
{
0x001BFFFF,
Zero,
^LPCB.LNKG,
Zero
},
Package (0x04)
{
0x001CFFFF,
Zero,
^LPCB.LNKA,
Zero
},
- Package (0x04)
- {
- 0x001CFFFF,
- One,
- ^LPCB.LNKB,
- Zero
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x02,
- ^LPCB.LNKC,
- Zero
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x03,
- ^LPCB.LNKD,
- Zero
- },
-
Package (0x04)
{
0x001DFFFF,
Zero,
^LPCB.LNKD,
Zero
},
Package (0x04)
{
0x001FFFFF,
Zero,
^LPCB.LNKG,
Zero
},
Package (0x04)
{
0x001FFFFF,
One,
^LPCB.LNKC,
Zero
},
Package (0x04)
{
0x001FFFFF,
0x02,
^LPCB.LNKB,
Zero
- },
-
- Package (0x04)
- {
- 0x001FFFFF,
- 0x03,
- ^LPCB.LNKA,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- Zero,
- ^LPCB.LNKE,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- One,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x02,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x03,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0017FFFF,
- Zero,
- ^LPCB.LNKH,
- Zero
}
})
}
}
Change-Id: Id3f067cbf7c7d649fbbf774648d8ff928cb752a4
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: Idc222392a0973f9ea62b943d18dd762b48c76d17
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI IDs were taken from the Intel Lynx Point datasheet [1].
[1] Intel® 8 Series/C220 Series Chipset Family Platform Controller Hub
(PCH) Datasheet, revision 003, document number 328904.
Change-Id: Ie4a264e9325d185334c3d7f7d2ed3c394ac33059
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ia669b25683c138d96be00db90d01cf406db4c2eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29404
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move soft_reset() to `southbridge/amd/common/` it's only used for
amdfam10 now.
Drop hard_reset() for good.
Change-Id: Ifdc5791160653c5578007f6c1b96015efe2b3e1e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7e8de35dcdad52bb311b34bfa9b272d17ed3186b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29243
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I05f9ea97ea80ac7a8f34845c59bd66e424ba2991
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- should not check VBOOT_STARTS_IN_BOOTBLOCK to set context flag
- implement vboot_platform_is_resuming on platforms missing it
- add ACPI_INTEL_HARDWARE_SLEEP_VALUES to two intel southbridges
[ originally https://review.coreboot.org/c/coreboot/+/28750 ]
BUG=b:114018226
TEST=compile coreboot
Change-Id: I1ef0bcdfd01746198f8140f49698b58065d820b9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/29060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I81985bd2836bdeb369587f170504a8a048ee496b
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
And here comes the mess...
This just renames do_hard_reset() to do_board_reset() and keeps current
behaviour. As these are never called from chipset or board code but only
from common code, it's likely that their implementations are untested
and not what we actually want. Also note, that sometimes implementations
for rom- and ramstage differ considerably.
Change-Id: Icdf55ed1a0e0294933f61749a37da2ced01da61c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29058
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement board_reset() as "system reset".
Change-Id: I80801ba58b9d849ef5e14185510666bd312106c2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29057
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement board_reset() as "system reset".
Change-Id: I2d277b0845b4e8977b68892c2e5e00d8918e063f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29056
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SOUTHBRIDGE_INTEL_COMMON_RESET for all Intel platforms that used to
perform a "system reset" in their hard_reset() implementation. Replace
all duplicate CF9 reset implementations for these platforms.
Change-Id: I8e359b0c4d5a1060edd0940d24c2f78dfed8a590
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use of device_t is deprecated.
Change-Id: I564319506870f75eab58cce535d4e3535a64a993
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Phase 1. Due to the size of the effort, this CL is broken into several
phases.
Change-Id: I0236e0960cd1e79558ea50c814e1de2830aa0550
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Apparently coreboot still uses magic numbers instead of macros in some
Lenovo mainboards. Let's use macros instead. Also removed FDD from l520
romstage (original value, 0x3c0c, means that FDD_LPC_EN was also
enabled).
Change-Id: I6468e3357f8eed434f8527a852e134380f486d9a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/28976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I4a9a9366c85206fa460519a26f48b3aada5bc7c3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/29100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28934
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4cf69dc3df2afaa8f33864374ea93548ab7ad810
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use of device_t is deprecated.
Change-Id: I4909ebffc978f537bbf6269d9e27dbaca43daa10
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Change-Id: I400de0a622c2b45ea5ef1f1446f4f489ac397c32
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use of device_t has been abandoned in ramstage.
Change-Id: Ib4dbb607cfd1e02d45efe141b498d6505574d6e6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I968ea205e53543f3af68596d6861e25e808057df
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add a warning as suggested in patch CB:28233 with the
"CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED" option.
Change-Id: I42b6b336bb519f3d18b5a41eb20b380636ff5819
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
HAVE_INTEL_FIRMWARE is used to enable certain options that rely on a valid
Inter Flash Descriptor to exist. It does *not* identify platforms or boards
that are capable of running in descriptor mode if it's valid.
Refine the help text to make this clear.
Introduce a new option INTEL_DESCRIPTOR_MODE_CAPABLE that does simply
declare that IFD is supported by the platform. Select this value everywhere
instead of the HAVE_INTEL_FIRMWARE and default HAVE_INTEL_FIRMWARE to
y if INTEL_DESCRIPTOR_MODE_CAPABLE is selected.
Move the QEMU Q35 special case (deselection of HAVE_INTEL_FIRMWARE) to
the mainboard directory.
Change-Id: I4791fce03982bf0443bf0b8e26d9f4f06c6f2060
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190)
- Make function naming in gnvs.h consistent (start with "chromeos_")
BUG=b:112288216
TEST=compile and run on eve
Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use get_acpi_table_revision(HPET) to keep all table versions in sync.
Change-Id: Idb5e8ccd49ec27f87a290f33c62df3c177645669
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Most FADT report using ACPIv3 FADT table. Using the get revision
function keeps the table versions in sync.
Change-Id: Ie554faf1be65c7034dd0836f0029cdc79eae1aed
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since ifdfake has been deprecated in favor of better alternatives, there
is no need to support it any further. Remove it from the build system.
Change-Id: Id62e95ba72004a1e15453e3eb75f09cb8194feb2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28233
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we can derive chromeos_acpi's location from that of
ACPI GNVS, remove chromeos_acpi entry from cbtable and
instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET.
BUG=b:112288216
TEST=None
CQ-DEPEND=CL:1179725
Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since we can retrieve the address of ACPI GNVS directly
from CBMEM_ID_ACPI_GNVS, there is no need to store and
update a pointer separately.
TEST=Compile and run on Eve
Signed-off-by: Joel Kitching <kitching@google.com>
Change-Id: I59f3d0547a4a724e66617c791ad82c9f504cadea
Reviewed-on: https://review.coreboot.org/28189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the IASL build warnings:
Object is not referenced (Name [CDW2] is within a method [_OSC])
Object is not referenced (Name [CDW3] is within a method [_OSC])
Remove the not referenced objects. They are not needed.
BUG=b:112476331
TEST=IASL doesn't give the warning.
Change-Id: I5b38d4de3f9875c5b013a49eb5146bf5916b96a6
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The specification updates for ICH 9 & 10 require to leave the
register in its default state by reserving all of its bits.
Writing to it does not seem to make a difference anyway since
reading it afterwards does not reflect the write (tested on ICH10).
Therefore we should omit the writes but document this fact in the
code because it is easy to miss from the datasheet alone.
Change-Id: Iec0d79f926a826a80b90907f7861d0cb2ca30a5b
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FAKE_IFD depends on out tree flashrom patches for which there are better
alternatives available now, so don't build with FAKE_IFD by default.
Change-Id: I2c6a6586da9a6d26b0a5bf7d3ba8f3ffe3205647
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I909d7dd4968aa2f76df00c03e603e8e82a4824c0
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
FAKE_IFD depends on out tree flashrom patches for which there are better
alternatives available now, so don't build with FAKE_IFD by default.
Change-Id: I21bc5bdc8b733fbfdb1b2a4fbcb572c76701074a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28009
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no need to redefine option present in
southbridge/intel/common/firmware/Kconfig.
Change-Id: I9999440031b07006e2df11e00dfb9f3dbe04f832
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28007
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2c5edadfd035c9af08af9ee326a5a2dc8b840faa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Apparently they were introduced when refining ICH7 support when
porting Kontron 986LCD-M and then copied over to ICH9 and 10.
Change-Id: I2d9ece608955310d22b79574b9113a1521b2076c
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since only a handful of boards have descriptor blobs in the tree, it makes no
sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard.
This patch flips the default value of said variable, rendering all current
overrides unnecessary. The few boards which have an IFD in the blobs repo use
`select HAVE_IFD_BIN` to enable adding the IFD by default.
Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed
alongside the latter, and has been added to the boards with a ME blob as
`select HAVE_ME_BIN`.
Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well.
Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove ACPI code which isn't necessary anymore due
to the LPC TPM ACPI generator.
Change-Id: I2fae286d61ec7c1036d1a8fa800dc8d9603252e9
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This effectively means it is possible to run another bootblock located at
top_of_flash - 64K.
The i82801gx southbridge has the ability to swap the two top 64K ranges by
flipping the BUC.TS bit (RCBA[3414] bit0).
This allows coreboot to build roms with a bootblock at the top swap offset by
selecting CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK.
Change-Id: Id96e10aea3e5fd955d45287134eb8643be414de9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This makes i82801ix use the common smm southbridge code to set up smm
relocation and smi handler setup. This is needed in this change for the
the smm relocation code relies on some southbridge functions provided
in the common code. Some of the old code is kept for the Q35 qemu
target.
This also caches the TSEG region and therefore increases MTRR usage a
little in some cases.
Currently SMRR msr's are not set on model_1067x and model_6fx since this needs
the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled
properly in the subsequent parallel mp init patchset.
Tested on Thinkpad X200: boots and going to and resuming from S3 still
works fine.
Change-Id: Ic80c65ea42fcf554ea5695772e8828d2f3b00b98
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23419
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id42bbea1f2deb0be80af2c8008045d37a926126a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
* Fix comments
* Use defines instead of magic values
* Use new PMBASE API to modify registers
Change-Id: Idd2ded19e528427db29fa87d87481b91bae2b512
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I2ced3f2bb9d1d150341a57ff333ca14c897c4fa3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Implement caching like it's done with pmbase.
Change-Id: I26d56a9ff1a8d6e64c164f36e23b846b8b459380
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27664
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0f37f0c49fd58adafd8a508e806e0f30759a6963
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27287
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use new PMBASE API functions in common SMI handler.
Change-Id: I4c64233ecdb8c1e28b319d84149f34bc8f1e4b97
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add common functions to manipulate PMBASE IO window.
TODO:
* Use the new functions to manipulate register in PMBASE.
* Get rid of duplicated get_pmbase()
Change-Id: I3b454434ade560fb056b1fc0afe9541df93e14dd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27278
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This applied to AMD devices as well as Intel, although the mechanism is
different. Move the option to a common place.
BUG=b:111363976
TEST=USE=em100-mode emerge-reef coreboot
See that a message appears:
* Enabling em100 mode (slow SPI flash)
Change-Id: Iea437bdf42e7bc49b1d28c812bfc6128e3eb68bd
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/27467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
in SD2.0 mode
According to BKDG for AMD Family 16h Models 30h-3Fh Processors
SDR50 tuning should be disabled in 0xA8 register.
Also fix clock frequency setting in 0xA4 for stepping >= A1
which caused reduced performance of SD cards transfer speed
even by half.
Change-Id: I80ca754b0c89e08aa90ff885467c7486a3efb999
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
