summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Expand)Author
2013-07-12src/southbridge/intel/{lynxpoint,bd82x6x}/spi.c: correct spelling of attemptedPaul Menzel
2013-07-10Vortex86EX southbridge routes more built-in PCI device IRQs.Andrew Wu
2013-07-10Drop some duplicates of PCI-e config functionsKyösti Mälkki
2013-07-10southbridge/intel/i82801gx: Make compilation possible with CONFIG_SMM_TSEGDenis 'GNUtoo' Carikli
2013-07-10i82801gx: smihandle: sync with southbridge/intel/bd82x6x/smihandler.cDenis 'GNUtoo' Carikli
2013-07-10southbridge: i82801gx: smihandler.c: Correct outl->outw mistake.Denis 'GNUtoo' Carikli
2013-07-10sandybridge: Add option to lock SPI regions on resumeNico Huber
2013-07-03Add support for DMP Vortex86EX PCI southbridge.Andrew Wu
2013-07-01usbdebug: Support i82801dx/ex southbridgeKyösti Mälkki
2013-07-01usbdebug: Unify Intel southbridge buildsKyösti Mälkki
2013-07-01usbdebug: Drop duplicates of EHCI BAR relocation codeKyösti Mälkki
2013-06-29AMD S3 resume: Add framwork to write bigger dataSiyuan Wang
2013-06-28amd/cimx/sb700/late.c: Add type cast to (UINT8)Bruce Griffith
2013-06-25bd82x6x: Fix early USB BAR programming (finally?)Nico Huber
2013-06-25sandybridge: Make inclusion of me.bin optionalNico Huber
2013-06-24sandybridge: Make build possible without descriptor.binNico Huber
2013-06-23lynxpoint: Fix early EHCI BAR programmingKyösti Mälkki
2013-06-21bd82x6x: Fix early EHCI BAR programmingKyösti Mälkki
2013-06-19intel/i82801gx: Store initial timestampNico Huber
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
2013-06-17AMD Hudson: Add config option to enable XHCIDave Frodin
2013-06-17Make intel blob locations configurablePatrick Georgi
2013-06-14AMD sb800 agesa/hudson: Use PCI definesKyösti Mälkki
2013-06-14lynxpoint: Fix PCI IDs for EHCIKyösti Mälkki
2013-06-13AMD Hudson: Add support for the SD controllerDave Frodin
2013-06-13AMD: Kconfig cleanupKyösti Mälkki
2013-06-13Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"Stefan Reinauer
2013-06-12Add support for Intel Ibex Peak (Mobile 5) southbridgeStefan Reinauer
2013-06-12usbdebug: Drop printk within console_init()Kyösti Mälkki
2013-06-12Fix i82801a/b/c/d IOAPICKyösti Mälkki
2013-06-12intel/*/smi.c: Output correct GPIO in ALT_GP_SMI_STS register dumpKonstantin Aladyshev
2013-06-11intel/bd82x6x/Makefile.inc: Revert duplicate addition of `usb_debug.c`Paul Menzel
2013-06-11Fix cycle error in intel southbridges to display GPI statusKonstantin Aladyshev
2013-06-10early_smbus: Add early SMBus implementation for VIA chipsetsAlexandru Gagniuc
2013-06-06intel/bd82x6x: Add option to include ethernet firmwareNico Huber
2013-06-06intel/bd82x6x: fix building usb debug on SNB/IVBPatrick Georgi
2013-06-03AMD Geode CS5536: downgrade BIOS_ERRChristian Gmeiner
2013-06-03Intel Lynx Point: LPC: Unify I/O APIC setupPaul Menzel
2013-06-03Intel BD82x6x: LPC: Unify I/O APIC setupPaul Menzel
2013-05-20AMD AGESA Hudson: Include `stdint.h` and `io.h` to fix buildPaul Menzel
2013-05-20ASUS F2A85-M: romstage.c: Set RAM voltage for non 1.5 Volt casePaul Menzel
2013-05-10Get rid of a number of __GNUC__ checksStefan Reinauer
2013-05-10Drop prototype guarding for romccStefan Reinauer
2013-05-07Intel 82801Gx: LPC: Unify I/O APIC setupPaul Menzel
2013-05-03Intel Lynx Point: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
2013-05-01AMD Hudson A55E: Remove GEC firmware blob kconfig promptBruce Griffith
2013-04-26Intel 82801gx: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
2013-04-18AMD/SB800: Define the GPP PCIe lane distributionDave Frodin
2013-04-16Intel Panther Point PCH: Use 2 << 24 to clarify that APIC ID is 2Vladimir Serbinenko
2013-04-15Fam14 DSDT: Also return for unrecognized UUID in _OSCMike Loptien
2013-04-11AMD RS780, SR5650: PcieTrainPort: Fix typo *i*gnoring in commentPaul Menzel
2013-04-11Persimmon/Fam14/SB800 DSDT: Split into common areasMike Loptien
2013-04-03lynxpoint: Cosmetic cleanupStefan Reinauer
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
2013-04-01lynxpoint: Basic configuration of SerialIO devicesDuncan Laurie
2013-04-01lynxpoint: Fix LP clock gating setup for LPCDuncan Laurie
2013-04-01lynxpoint: fix enable_pm1() functionAaron Durbin
2013-04-01lynxpoint: split clearing and enabling of smmAaron Durbin
2013-04-01AMD hudson & SB800 - Fix issues with mawkMartin Roth
2013-04-01lynxpoint: Rework ACPI NVS to add new SerialIO variablesDuncan Laurie
2013-03-29AMD CIMx SB800: Update Kconfig help texts to new SATA mode defaultPaul Menzel
2013-03-22Unify setting i82801e LPCKyösti Mälkki
2013-03-22Fix compilation of Intel LynxPoint based boardsStefan Reinauer
2013-03-22romstage: add support for vboot firmware selectionAaron Durbin
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
2013-03-21lynxpoint: Fix up handling for LynxPoint-LP chipsetsDuncan Laurie
2013-03-21lynxpoint: Change sata.c to get rid of #ifDuncan Laurie
2013-03-21lynxpoint: Fix ELOG logging of power management eventsDuncan Laurie
2013-03-21haswell/lynxpoint: Use new PCH/PM helper functionsDuncan Laurie
2013-03-21lynxpoint: Fix GPIO and PM base reservationsDuncan Laurie
2013-03-21lynxpoint: remove DEBUG_PERIODIC_SMISDuncan Laurie
2013-03-21lynxpoint: Add power management helper functionsDuncan Laurie
2013-03-21lynxpoint: Add helper functions for reading PM and GPIO baseDuncan Laurie
2013-03-21lynxpoint: Add function for checking for LP chipsetDuncan Laurie
2013-03-21lynxpoint: Enable EC IO ports 0x62/0x66Duncan Laurie
2013-03-21lynxpoint: update MBP give up routineAaron Durbin
2013-03-21LynxPoint: Move RCBA helper function to its own fileDuncan Laurie
2013-03-19lynxpoint: Add cbfs_load_payload() implementationAaron Durbin
2013-03-19bd82x6x: Fix compiling with USB debug port supportRonald G. Minnich
2013-03-18lynxpoint: Move a bit of generic RCBA into early_pchDuncan Laurie
2013-03-18haswell: Use SMM ModulesAaron Durbin
2013-03-17Intel HD Audio: clean up initialization codeStefan Reinauer
2013-03-17haswell platforms: restructure romstage mainAaron Durbin
2013-03-17bd82x6x: Add config option to force SATA link to different speeds.Shawn Nematbakhsh
2013-03-17Pantherpoint: Add XHCI device initDuncan Laurie
2013-03-17bd82x6x: don't use absolute symbolsAaron Durbin
2013-03-17Add bd82x6x XHCI(USB3) S3/S4 workaroundMarc Jones
2013-03-17Add bd82x6x PCH functions to SMMMarc Jones
2013-03-17lynxpoint: Add support for disabling ULT devicesDuncan Laurie
2013-03-14lynxpoint: lpc resource reservationsAaron Durbin
2013-03-14haswell: more ULT/LP support and minor tweaksDuncan Laurie
2013-03-14lynxpoint: Update device IDs and clock gating setupDuncan Laurie
2013-03-14lynxpoint: Add new GPIO interface for Lynxpoint-LPDuncan Laurie
2013-03-14lynxpoint: Add Kconfig entry for Low Power chipsetDuncan Laurie
2013-03-14lynxpoint: ME to BIOS Payload UpdatesAaron Durbin
2013-03-14lynx point: add new ME status informationAaron Durbin
2013-03-14haswell: remove GPIO60 memory reset gate on S3 transitionDuncan Laurie
2013-03-14haswell: remove explicit pcie config accessesAaron Durbin
2013-03-14lynxpoint: PMIR register renameAaron Durbin
2013-03-14lynxpoint: Management Engine UpdatesAaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 05:26:18 +0000