summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2015-10-26southbridge/amd/sr5650: Add AMD Family 15h CPU supportTimothy Pearson
Change-Id: I88203907270db1a268bd377151f15c24fca1efdc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25southbridge/amd/sb700: Add option for last power state after failureTimothy Pearson
Change-Id: Ieb27bd51dfd45dd15d24a576865d38180a07444e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12175 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-25southbridge/amd/sb700: Set up uninitialized devices in early bootTimothy Pearson
LPC decodes were not enabled, leading to a failure of POST 80 cards and similar debugging devices. Enable the relevant LPC decodes to allow debugging. Additionally, the SMBUS controllers were not properly set up. Enable both the primary and auxiliary controllers. Finally, K10 and higher CPUs were hanging during boot due to a misconfigued IOAPIC. Properly configure the IOAPIC. Change-Id: I9ffb6542ce445ac971fb81f4f554e7f1313e6a98 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12177 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Fix hardcoded printk() function names in pcie.cTimothy Pearson
Change-Id: Idf1db091f1d1e40ce2f248bc25d662cf9608b27e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12179 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Fix boot hang on ASUS KGPE-D16Timothy Pearson
Change-Id: I1d7d6715663a13ab94fd6d71808e35f0f7384d00 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11938 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700/acpi: Add IDE / SATA ASL codeTimothy Pearson
Change-Id: I507c93556dd66c3590c8ca11c06cd5b2dd7884c5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12176 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sr5650: Fix boot failure on ASUS KGPE-D16Timothy Pearson
Change-Id: Ia13ba58118a826e830a4dc6e2378b76110fcabad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11939 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Add optional delay after link trainingTimothy Pearson
Certain devices (such as the LSI SAS 2008 controller) do not respond to PCI probes immediately after link training. If it is known that such a device is likely to be installed allow the mainboard to insert an appropriate delay. Change-Id: Ibcd9426628cacd6f88e6e3fcbc2b3eb7e3a92081 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11991 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-24amd/agesa/hudson: Add support for hiding the USB1.1-only OHCITobias Diedrich
The hudson chipset has 4 USB controllers, the fourth is USB1.1-only and (presumably) not used very often, add support for hiding it: 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) USB1 (3.0, XHCI) 00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB2 (2.0, OHCI+EHCI) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB3 (2.0, OHCI+EHCI) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB4 (1.1, OHCI only) Change-Id: I804e7852fd0a6f870dd118b429473cb06ebac9a4 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7355 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23southbridge/amd/sr5650: Fix GPP3a link training in higher width modesTimothy Pearson
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11990 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-22Revert "Remove sandybridge and ivybridge FSP code path"Martin Roth
Please don't remove chipsets and mainboards without discussion and input from the owners. Someone was asking about cougar canyon 2 just a couple of weeks ago - there's obviously still interest. This reverts commit fb50124d22014742b6990a95df87a7a828e891b6. Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/12128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-16intel/southbridge/bd82x6x: Add option to set SPI VSCC registersNico Huber
These are needed for the hardware-sequencing function of the PCH SPI interface. Values are specific to the flash chip used on a board. Change-Id: Id06766b4bac2686406bc09b8afa02f311f40dee7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11798 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-10-16southbridge/amd/sr5650: Remove unnecessary register configurationTimothy Pearson
Do not hardcode the CPU downstream non-posted request limit; the value of this register is CPU family specific and is set appropriately in the corresponding CPU driver code. Change-Id: I432b942f114243cba23c9a8d916cf6d07bc4740b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11935 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-14Revert "Remove FSP Rangeley SOC and mohonpeak board support"Martin Roth
This chip is still being used and should not have been deleted. It's a current intel chip, and doesn't even require an ME binary. This reverts commit 959478a763c16688d43752adbae2c76e7764da45. Change-Id: I78594871f87af6e882a245077b59727e15f8021a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11860 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-07x86/bootblock: Use LDFLAGS_bootblock to enable garbage collectionAlexandru Gagniuc
The x86 bootblock linking is a mess. The bootblock is treated in a very special manner, and never received the update to link-time garbage collection. On newer x86 platforms, the boot media is no longer memory-mapped. That means we need to do a lot more setup in the bootblock. ROMCC is unsuitable for this task, and walkcbfs only works on memory-mapped CBFS. We need to revise the x86 bootflow for this new case. The approach this patch series takes is to perform CAR setup in the bootblock, and load the following stage (either romstage or verstage) from the boot media. This approach is not new, but has been done on our ARM ports for years. Since we will be adding .c files to the bootblock, it is prudent to use link-time garbage collection. This is also consistent to how we do things on other architectures. Unification FTW! Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11781 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-03Remove FSP Rangeley SOC and mohonpeak board supportAlexandru Gagniuc
mohonpeak is the reference board for Rangeley. I doubt anyone uses it or cares about it. We jokingly refer to it as "Moron Peak". It's code with no known users, so we shouldn't be hauling it around for the eventuality that someone might use it in the future. Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11790 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03Remove sandybridge and ivybridge FSP code pathAlexandru Gagniuc
We already have two other code paths for this silicon. Maintaining the FSP path as well doesn't make much sense. There was only one board to use this code, and it's a reference board that I doubt anyone still owns or uses. Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11789 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03sandybridge ivybridge: Treat native init as first class citizenAlexandru Gagniuc
This is a sad story. We have three different code paths for sandybridge and ivybridge: proper native path, google MRC path, and, everyone's favorite: Intel FSP path. For the purpose of this patch, the FSP path lives in its own little world, and doesn't concern us. Since MRC was first, when native files and variables were added, they were suffixed with "_native" to separate them from the existing code. This can cause confusion, as the suffix might make the native files seem parasitical. This has been bothering me for many months. MRC should be the parasitical path, especially since we fully support native init, and it works more reliably, on a wider range of hardware. There have been a few board ports that never made it to coreboot.org because MRC would hang. gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so the effort was abandoned at first. Once the native path became available, the effort was restarted and the board is now supported. In honor of the hackers and pioneers who made the native code possible, rename things so that their effort is the first class citizen. Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11788 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-09-30AMD Bettong: Fix usb device in devicetree for Carrizozbao
Add some missing devices to device tree and header. Remove the obsolete devices. Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11378 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-09-16Move final Intel chipsets with ME to intel/common/firmwareMartin Roth
This switches the final 4 Intel platforms that use ME firmware from using code specific to the platform to the common IFD Kconfig and Makefile. braswell, broadwell, bd82x6x (cougar point & panther point) and ibexpeak Change-Id: Id3bec6dbe2e1a8a90f51d9378150dbb44258b596 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10876 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
The build system was previously determining the flow and linking scripts bootblock code by the order of files added to the bootblock_inc bootblock-y variables.Those files were then concatenated together and built by a myriad of make rules. Now bootblock.S and bootblock.ld is added so that bootblock can be built and linked using the default build rules. CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the chipset code to place include files in the path of the bootblock program -- a replacement for the chipset_bootblock_inc make variable. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built vortex, rambi, and some asus boards. Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11495 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
coreboot has no CREDITS file. Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11514 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-04bootstate: remove need for #ifdef ENV_RAMSTAGEAaron Durbin
The BOOT_STATE_INIT_ENTRY macro can only be used in ramstage, however the current state of the header meant bad build errors in non-ramstage. Therefore, people had to #ifdef in the source. Remove that requirement. Change-Id: I8755fc68bbaca6b72fbe8b4db4bcc1ccb35622bd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11492 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-04intel/common/firmware: Add common GBE rom supportMartin Roth
Add support to the Intel common firmware Kconfig and Makefile.inc to allow the Gigabit Ethernet (GBE) blob to be added to the final binary. Change-Id: Id5fab3061874dad759750b67d3339eb8c99a62d6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10875 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-09-02southbridge/ibexpeak: use new ssdt sata port generatorAlexander Couzens
Drop old incomplete, broken and hardcoded sata.asl properties. The new sata acpi generator only needs a proper defined device. Change-Id: Id3eca5551a070dfdd6fa674e1d5b6627e28ab5a7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9710 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-09-02southbridge/bd82x6x: use new ssdt sata port generatorAlexander Couzens
Drop old incomplete, broken and hardcoded sata.asl properties. The new sata acpi generator only needs a proper defined device. Change-Id: I2be76097ebd27f2529e3fbbecefd314a0eea3cb0 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9709 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-08-19AMD ROMSIG: Only check location if ROMSIG is usedMartin Roth
The location of the AMD ROMSIG binary was being checked and warnings were being printed even when the ROMSIG file wasn't being used. These false warnings are avoided by moving the warnings into the block where the CBFS file for the ROMSIG is generated. Change-Id: Ie44a2ad97ff3b15df6dc9b8166992de6ed837997 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11161 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-17AMD Binary PI: Fix the build when the user's group has a spaceDan Christensen
When the user's primary group contains a space ls -l and awk get the wrong value for the file size. This results in padding the coreboot_psp_directory_combine_pubkey.bin file too much which ultimately means RtmPubSigned.key can not be placed at the necessary offset. Changing from ls -l to ls -ln seemed like the most minimal, POSIX-friendly way to effect this change. Change-Id: Icbeaad476753924626adb6de53dc9a30052d91a6 Signed-off-by: Dan Christensen <opello@opello.org> Reviewed-on: http://review.coreboot.org/11242 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-09amd8111, ck804, mcp55: use CONFIG_HPET_ADDRESSJonathan A. Kollasch
As acpi_write_hpet() uses CONFIG_HPET_ADDRESS in the HPET table we need to use CONFIG_HPET_ADDRESS when assigning it to the device. Change-Id: I656f917658f1c1717bb3653fa048a6d36fca2454 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10925 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09license headers: Drop FSF addresses againPatrick Georgi
Some FSF addresses found their way back into our tree. Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11145 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-30SB800: Port to 64bitStefan Reinauer
Change-Id: I944fb254e9470c80b13c9eef9d6b1177a56e615f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10582 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30AMD binary PI: add southbridge support for fan controlWANG Siyuan
1. Add functions to support fan control. 2. When IMC firmware is added, the current firmwares' layout cause build error. There is not enough space to add some firmwares, so HUDSON_PSP_OFFSET is added to fix this problem. Change-Id: Ie470a88cb9da256d9f72ea56bf268c15df195784 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10720 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-23nvidia southbridges: don't touch 0x78 in LPC bridge with Fam10hJonathan A. Kollasch
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC bridge register 0x78 (particularly the 0x7b byte) to get to ramstage: Assume that there's something about this register that adjusting it the way we do for K8 is something that can/should be universally avoided on all Fam10h systems with these chipsets. Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10984 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-07-21amd/hudson: Fix makefile FWM location checkMarc Jones
Fix typo. Use the correct math helper int-lt. Change-Id: Ia5e722020c75595dfcfb853ea8238fb8391f9a04 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10980 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-18amd/pi: Increase assumption for maximum CBFS file header sizePatrick Georgi
The new attributes increase the header size, breaking this assumption. Change-Id: Ib23862f27650b39133deafb74a24327b098b6e86 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10942 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-14azalia: fix up and clean up shrinkage of boilerplate codeJonathan A. Kollasch
Should fix regression in HDA verb setup on nvidia mcp55 and intel sch southbridges. The mcp55 code could not find the mainboard's verb table because the table was not even being compiled in. The sch boards appeared to have the same issue. Intel broadwell and fsp_bd82x6x seemed to have not gotten the boilerplate shrink, so apply it to those too. Followup-to: Ib3e09644c0ee71aacb067adaa85653d151b52078 (azalia: Shrink boilerplate) Change-Id: If7aae69f5171db67055ffe220bdff392caaa5d9f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10826 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14amd/rs780: Fix typoPatrick Georgi
Change-Id: I08f7251f8fc42b9028b1fdb830546f9922ef43aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: YongGon Kim <ilios86@gmail.com> Reviewed-on: http://review.coreboot.org/10914 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2015-07-12Verify Kconfigs symbols are not zero for hex and int type symbolsMartin Roth
For hex and int type kconfig symbols, IS_ENABLED() doesn't work. Instead check to make sure they're defined and not zero. In some cases, zero might be a valid value, but it didn't look like zero was valid in these cases. Change-Id: Ib51fb31b3babffbf25ed3ae4ed11a2dc9a4be709 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-12southbridge/amd/pi/hudson: Fix HUDSON_DISABLE_IMC kconfig warningMartin Roth
Platforms selecting the HUDSON_DISABLE_IMC symbol were showing the warning: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_AMD_AGESA_BINARY_PI) selects HUDSON_DISABLE_IMC which has unmet direct dependencies (SOUTHBRIDGE_AMD_PI_AVALON || SOUTHBRIDGE_AMD_PI_BOLTON || SOUTHBRIDGE_AMD_PI_KERN) By moving the definition of the symbol outside of the if block and removing the default n, we can get rid of the warning without changing the value for any platform. Change-Id: I5c1bdfbcf3c5c44ee05b8c5e679f6854d784d8dc Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10680 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2015-07-12Change #ifdef and #if defined CONFIG_ bools to #if IS_ENABLED()Martin Roth
Kconfigs symbols of type bool are always defined, and can be tested with the IS_ENABLED() macro. symbol type except string. Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-11amd/.../hudson: Warn if HUDSON_FWM_POSITION is not inside CBFSMartin Roth
Display a warning if CONFIG_HUDSON_FWM_POSITION is not inside CBFS. This can be extended to other Kconfig values for CBFS. Change-Id: I2423f7b361dda8aac5dab409fa7b656de486f635 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10683 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-11Calculate HUDSON_FWM_POSITION and display warning on mismatchMartin Roth
This patch calculates the address where the chipset firmware descriptor should be located and compares it against the actual value from Kconfig. If the two don't match, it puts up a warning. This could probably replace the config variable completely, but I wanted to see how other people felt before doing that. I seem to recall that the value used to be calculated, so I figure that there must be a reason it's done this way at this point. If we do want to keep the Kconfig setting, this patch could also be modified to just verify that the HUDSON_FWM_POSITION is inside the ROM space. Change-Id: I94addf463e2c694a94eef218ec855103a3bb5da5 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10682 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07timestamp: remove conditional #if CONFIG_COLLECT_TIMESTAMPSAaron Durbin
Empty functions are provided when !CONFIG_COLLECT_TIMESTAMPS so stop guarding the compilation. BUG=None BRANCH=None TEST=Built Original-Change-Id: Ib0f23e1204e048a9b928568da02e9661f6aa0a35 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228190 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9aa69fd43d77f5f7acdc9f361016c595dd16104e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I14418c8ef3ccb57ac6fce05b422e1c21b1d38392 Reviewed-on: http://review.coreboot.org/10742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-02ME/IFD binaries: Implement sane defaults for file pathsStefan Reinauer
Change-Id: I81298aca07c18359e8e4bf5b2d8926d6b45a30c5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10763 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-02ifdfake: Add prompts and help for the regions in KconfigMartin Roth
Update the ifdfake region questions in Kconfig with help descriptions and prompts to allow values to be entered and not just use pre-defined default values. Change-Id: Ifdffadc3d74ec49492c2ded66623a1be6945425f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10649 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Intel Firmware Descriptor: Add Lock ME Kconfig questionMartin Roth
Add the Kconfig question to allow the user to lock the ME section using ifdtool. Change-Id: I46018c3bc9df3e309aa3083d693cbebf00e18062 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Move baytrail & fsp_baytrail to the common IFD interface.Martin Roth
- Add the common/firmware subdir to the baytrail & fsp_baytrail makefiles and remove the code it replaces. - Update baytrail & fsp_baytrail Kconfigs to use the common code. - Update the IFD Kconfig help and prompts for the TXE vs ME. - Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail platforms have their own defaults. Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10647 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Intel Firmware Descriptor Kconfig: remove USES_INTEL_MEMartin Roth
When I added the common IFD Kconfig and Makefile, My thinking was that I could use this symbol to differentiate between the ME and the TXE, and to exclude the ME questions from platforms that use the IFD, but don't use an ME, like Rangeley. In practice this made things a lot more complicated and isn't worth it. Change-Id: I4428744e53c6bb7fc00a4fa4f0aa782c25fc9013 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-25amd/pi/hudson: Fill ROMSIG with 0xFF instead of 0zbao
Besides the first five DWORDs, the offsets 0x40 & 0x41 are used to save SPI settings. They should only be 0xFF for being written. Other parts in ROMSIG are also changed to 0xFF for potential requirement. Change-Id: I61ea8295d5ee8ffbbd0cfcf9e4bece770d70e1f2 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/10651 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24sandy/ivy: Include IRQ routes from platformKyösti Mälkki
The default route does work for all Chromebooks and is replaced with platform-specific one in follow-up. Change-Id: Ia1839ed38dacf44a89dc757394d054e17666f193 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10442 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-23southbridge/intel: Create common IFD Kconfig and MakefileMartin Roth
We've got a lot of duplicated code to set up the IFD/ME/TXE/GBE/ETC. This is the start of creating a common interface for all of them. This also allows us to reduce the chipset dependencies for CBFS_SIZE. Change-Id: Iff08f74305d5ce545b5863915359eeb91eab0208 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10613 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23AMD Kern: Fix path of PspSecureOs BLOBWANG Siyuan
AMD Kern uses PspSecureOs_prod_CZ.csbin rather than PspSecureOs_prod_CZ.sbin. PspSecureOs_prod_CZ.csbin is the firmware in CarrizoPI v1.0.0.7. Change-Id: Idf54ee808dd6965aec9b979be00b7f890a88b06d Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10639 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-22Remove incorrect Kconfig expressionsMartin Roth
The symbols used in these expressions were not correct and would never evaluate as true. Change-Id: Ia20177f41505473b14bc7b8e4b6fb16de36cc295 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10437 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-15ck804 ACPI: set duty width in FADT correctlyJonathan A. Kollasch
Change-Id: I12ef633009b5c63b08fbeb76d58cb08c776485ac Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10546 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-14amd/cimx/sb800/acpi/smbus.asl: Align commentsPaul Menzel
Change-Id: I1ea1b1efedfea2926a24f06beeb8d7d0464057e5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10543 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-13southbridge/amd/pi: Add support for new AMD southbridge KernWANG Siyuan
Kern is the southbridge of AMD Merlin Falcon(Carrizo). This add support of HD audio, lpc, sata and usb for Kern. Change-Id: Ie47e38bc1099cdb72002619cb1da269f3739678b Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10418 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10AMD PI: remove unuseful ACPI codeWANG Siyuan
sata.asl and superio.asl are empty files. Remove them. Change-Id: Icd3e990aa713281e46dcbd8e0847166c77656b1c Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10505 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-10model_2065x: Use common i945-ivy TSEG SMM init.Vladimir Serbinenko
Change-Id: I0302cbaeb45a55a4cfee94692eb7372f2b6b206d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10468 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-10fsp_model_206ax: Use common i945-ivy tseg SMM init.Vladimir Serbinenko
Change-Id: Iac390b565d709b11bc7a6631b11315994b6e2c3c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10466 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-09Create i945-ivy smm tseg init based on ivy code.Vladimir Serbinenko
CPU-side logic is unchanged for this range of CPUs as long as all of them use TSEG (or ASEG, just needs to be consistent). So uplift 206ax code while extracting southbridge and APIC code into separate functions. Change-Id: Ib365681d1da8115922c557fddcc59afc156826da Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10465 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-08x86 SMM: Relocator is intel-onlyKyösti Mälkki
Change-Id: I78519b8f060b1ba81e8b9c7c345820180a14f2fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10441 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08southbridge/amd/{agesa,pi}/hudson/lpc.c: Sync togetherEdward O'Callaghan
Resync together, backporting a fix for the initialization of 8254 and 8259, as in commit 8d9a1bd5. Also fix a typo and reduce out useless whitespace differences. Change-Id: I9a9b1fb9083c5417a8d061f90a89074f2a601ddf Signed-off-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reported-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10453 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05lib: Unify log2() and related functionsJulius Werner
This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
The input/output value max is no longer used for tracking the bus enumeration sequence, everything is handled in the context of devicetree bus objects. Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Drop parameter max from scan_busKyösti Mälkki
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-29bd82x6x: Move calling of finalize() on resume to southbridge codeVladimir Serbinenko
Change-Id: I6416cd5780fbda0b3c2e236ce98a9f9a508e70c6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10293 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-29Remove whitespace at the end of line.Vladimir Serbinenko
Change-Id: Ie9c3ef9fb4b3b2a0450a56e1d752b6509fa72a86 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10364 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-05-29i82801gx: Reserve LPC decodes.Vladimir Serbinenko
This change makes sure that LPC controller declares resources that it actually decodes. bd82x6x already does it but i82801gx doesn't leading to allocator potentially allocating something else to the same range. Change-Id: Ieca9852e54c08e31d4d41aea97f317d9a6919806 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7662 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-29nvs: Add missing stdint.h include.Vladimir Serbinenko
nvs.h uses u8 without including stdint.h. Change-Id: I4ffcbb850cb7b8f47126ee1906b9e0960dd449e8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-28Migrate fsp_206ax to SMM_MODULESVladimir Serbinenko
This gets rid of ugly tseg_relocate for fsp_bd82x6x. This is adaptation of a3e41c089602c58409e8dfd4aceecbdd7d4f4a5b Change-Id: I4e80e6e98d3a6da3e3e480e9368fae1b3ed67cd6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10353 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28Migrate 2065x to SMM_MODULESVladimir Serbinenko
This gets rid of ugly tseg_relocate for ibexpeak. This is backport of 29ffa54969414b833de5c61b507b061f920d650b to ibexpeak. Change-Id: I456d85abdbadb2fdccf77ca771e2518cf8b8c536 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10352 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28Migrate 206ax to SMM_MODULESVladimir Serbinenko
This gets rid of ugly tseg_relocate for bd82x6x. This is backport of 29ffa54969414b833de5c61b507b061f920d650b to bd82x6x. Change-Id: I0f52540851ce8a7edaac257a2aa83d543bb5e530 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-28Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10322 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-27AGESA: Separate HeapManager declarations from BiosCallOutsKyösti Mälkki
Change-Id: I168db92b10d5abc05be2dc374df3f892003d5255 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10317 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-26acpigen: Remove all explicit length trackingVladimir Serbinenko
Change-Id: I88248d78c01b4b4e42a097889b5f4ddfdac3d966 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7367 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-26bd82x6x: Merge common platform ASL code.Vladimir Serbinenko
This code in reality just describes the southbridge features, don't put a copy in every mainboard. Change-Id: I8cf3019a36b1ae6a17d502e7508f36ea9fa62830 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10231 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2015-05-21Kill ENABLE_TPM.Vladimir Serbinenko
It's used only in P470 and lynxpoint machines. Remove it from other southbridges. New machines should use src/drivers/pc80/tpm. Change-Id: I4741e76df4c6204d65562f016abac9ed60558432 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10268 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-20acpi: make fill_slit and fill_srat into arguments.Vladimir Serbinenko
SLIT and SRAT are created this way only on amdk8 and amdfam10. This saves the need of having a lot of dummies. Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7052 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-20bd82x6x: Merge common apmc finalize procedure.Vladimir Serbinenko
Change-Id: I9c938b8a69479fae6b0eb99d1135f1caaf26d0e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10227 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-15ibexpeak: Merge common NVS initVladimir Serbinenko
Change-Id: Ia5e26110928fa011305c13362f20fbe78ca9cf30 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7134 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-14bd82x6x, ibexpeak: Support fully locking ROM on S3 resume.Vladimir Serbinenko
Currently only RO-lock is supported. Make full lock available as an option. Change-Id: Ib68a1e82733a51053a9adc80ac501b6205c6b8a7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10191 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-08southbridge/i82801gx: Add x_EN defines for LPC_ENDamien Zammit
A few hardcoded values could be fixed after this commit Change-Id: I3ae67f4f6136361d67d4fdae2a5a29b7b1a75478 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/10065 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-053rdparty: Move to blobsPatrick Georgi
To move 3rdparty to 3rdparty/blobs (ie. below itself from git's broken perspective), we need to work around it - since some git implementations don't like the direct approach. Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-03src/southbridge/intel/i82801ix: Add GPIO register locationsTimothy Pearson
Change-Id: I226a1a6bc6b1f921c03f8ec57875a88314928aeb Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9318 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>