Age | Commit message (Expand) | Author |
2011-02-14 | Removed LPC DMA Deadlock workaround... | Josef Kellermann |
2011-02-14 | This code provides southbridge initialization for SB800 south bridges. It is... | Frank Vibrans |
2011-02-12 | Attached patch fixes the LPC decode ranges of SB600/SB800. We enable early on... | Rudolf Marek |
2011-02-10 | RS690: Provide support for MMCONF. | Josef Kellermannseppk |
2011-02-03 | Fix subvendor/subdevice programming on RS690 | Josef Kellermann |
2011-02-03 | Wrap CONFIG_MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_ID in weak functions | Patrick Georgi |
2011-01-30 | Inverse two arguments of cbfs-files-y and adapts its users (one of which alre... | Patrick Georgi |
2011-01-28 | Attached patch fixes the LPC decode ranges of SB700. We enable early only Ser... | Rudolf Marek |
2011-01-28 | Fix Bimini build | Stefan Reinauer |
2011-01-27 | Trivial. Re-indent the code. | Zheng Bao |
2011-01-27 | Set the phy via weak function. | Zheng Bao |
2011-01-25 | Set the SB800 SATA PHY correctly. | Zheng Bao |
2011-01-24 | Change fadt revision back to 3. | Zheng Bao |
2011-01-21 | Now bimini can boot linux to login. | Zheng Bao |
2011-01-20 | S3 feanture of SB800. Compiliant with SB700. | Zheng Bao |
2011-01-20 | Move some board specific functions to sb800.h. | Zheng Bao |
2011-01-20 | This sb800 code is derived from sb700. | Zheng Bao |
2011-01-18 | remove the code which is not ready to release. | Zheng Bao |
2011-01-18 | remove the code which is not ready to release. | Zheng Bao |
2011-01-12 | drop unused files | Stefan Reinauer |
2011-01-11 | change a readable way to fix SB800 CIMX "multi-character constant warning". | Kerry She |
2011-01-04 | MCP55: Cosmetic fixes, switch to u8 et al. | Uwe Hermann |
2011-01-04 | CK804: Cosmetic fixes, switch to u8 et al. | Uwe Hermann |
2011-01-01 | src/southbridge/amd/cimx_wrapper: Run dos2unix on the files. | Uwe Hermann |
2011-01-01 | AMD SB800: Drop component prefix from filenames. | Uwe Hermann |
2011-01-01 | Add AMD SB800 southbridge support via cimx_wrapper. | Kerry She |
2010-12-31 | Add RS785(RS880) support. Just few pci_ids. | Zheng Bao |
2010-12-30 | Remove duplicated GX2 processor IIOC mode setting on CS5535 southbridge code | Nils Jacobs |
2010-12-29 | -Change the remaining GLIU1 port 5 register names from VIP (Video Input Port) | Nils Jacobs |
2010-12-29 | -Clean up some comments. | Nils Jacobs |
2010-12-27 | Intel SCH: make state machine binary selection available in Kconfig for now. | Stefan Reinauer |
2010-12-26 | Random fixes for TI pci1x2x / Nokia IP530 / others. | Uwe Hermann |
2010-12-18 | SMM on AMD K8 Part 2/2 | Rudolf Marek |
2010-12-18 | SMM for AMD K8 Part 1/2 | Stefan Reinauer |
2010-12-18 | Fix a few whitespace and coding style issues. | Uwe Hermann |
2010-12-18 | A couple of Poulsbo fixes: | Patrick Georgi |
2010-12-18 | Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 board | Patrick Georgi |
2010-12-16 | Add TINY_BOOTBLOCK support for the SiS966 southbridge. | Uwe Hermann |
2010-12-14 | Set the ROMSIZE as 4MB. | Zheng Bao |
2010-12-13 | Following patch adds support for suspend/resume functions. I had to change th... | Rudolf Marek |
2010-12-11 | I was bitten by the rename, this is part of r6165. | Rudolf Marek |
2010-12-11 | Following patch makes just one fadt.c file. For SB700. | Rudolf Marek |
2010-12-10 | Add TINY_BOOTBLOCK support for AMD SB700. | Uwe Hermann |
2010-12-09 | Merge enable_rom.c files into bootblock.c files. | Uwe Hermann |
2010-12-09 | Add missing instruction break. | Zheng Bao |
2010-12-08 | Tobias Diedrich wrote: | Tobias Diedrich |
2010-12-08 | first round name simplification. drop the <component>_ prefix. | stepan |
2010-12-07 | Get rid of some unneeded function prototypes in romstage.c files. | Uwe Hermann |
2010-12-06 | Before lane reversal, | Zheng Bao |
2010-11-30 | Trivial. Reindent and dos2unix. | Zheng Bao |
2010-11-29 | Tobias Diedrich wrote: | Tobias Diedrich |
2010-11-29 | fix typo | Stefan Reinauer |
2010-11-27 | After finding the missing bit poweroff works now. | Tobias Diedrich |
2010-11-26 | Broadcom BCM5785: Add TINY_BOOTBLOCK support. | Uwe Hermann |
2010-11-26 | AMD SB600: Add TINY_BOOTBLOCK support. | Uwe Hermann |
2010-11-26 | AMD-8111: Add TINY_BOOTBLOCK support. | Uwe Hermann |
2010-11-25 | MCP55: Add TINY_BOOTBLOCK support. | Uwe Hermann |
2010-11-24 | With low serial console loglevels a pcie graphics card is not | Tobias Diedrich |
2010-11-24 | This patch solves crashes and BSODs that occur when booting Win7 with | Scott Duplichan |
2010-11-22 | 1) wraps the s3 parts of chipset code/memory init code with if CONFIG_HAVE_AC... | Rudolf Marek |
2010-11-22 | Printing coreboot debug messages on VGA console is pretty much useless, since | Stefan Reinauer |
2010-11-21 | Move CK804_PCI_E_X and CK804B_PCI_E_X defines (which have been 4 by | Jonathan Kollasch |
2010-11-21 | Move MCP55_PCI_E_X_* to Kconfig. Any useless values in romstage.cs were | Patrick Georgi |
2010-11-20 | Some more DIMM0 related cleanups and deduplication. | Uwe Hermann |
2010-11-20 | Unify DIMM SPD addressing. For Geode, change the | Patrick Georgi |
2010-11-18 | Fix/drop some obsolete comments, | Uwe Hermann |
2010-11-18 | Move register block definitions out of board code into | Patrick Georgi |
2010-11-17 | Linux also needs the MMCONF area to be reserved either in E820 or | Tobias Diedrich |
2010-11-17 | The only southbridge having a pirq_assign_irqs function (needed for | Tobias Diedrich |
2010-11-14 | Add a target for the ASUS A8V-E Deluxe (trivial). | Uwe Hermann |
2010-11-14 | Move cable detect logic to a weak function in vt8237r_ide.c and add | Tobias Diedrich |
2010-11-14 | Currently the | Tobias Diedrich |
2010-11-11 | Add VT8237A id to src/southbridge/via/vt8237r/bootblock.c | Tobias Diedrich |
2010-11-11 | Add pci id and ops for VT8237A SATA controller | Tobias Diedrich |
2010-11-08 | We can't print this early. | Ward Vandewege |
2010-11-07 | Depends on the "Introduce get_vt8237_lpc() function" and | Tobias Diedrich |
2010-11-07 | This adds the VT8237A LPC pci_locate_device call in vt8237r_early_smbus.c | Tobias Diedrich |
2010-11-07 | Use get_vt8237_lpc() in vt8237_sb_enable_fid_vid() too. | Tobias Diedrich |
2010-11-07 | Instead of duplicating the pci_locate_device calls multiple times, | Tobias Diedrich |
2010-11-07 | Add pointer to public PCIe bridge documentation on | Tobias Diedrich |
2010-11-07 | This adds VT8237A specific VLINK/LPC init functions in vt8237_ctrl.c | Tobias Diedrich |
2010-11-07 | This adds the VT8237A LPC device id and the pci_driver struct in | Tobias Diedrich |
2010-11-04 | Add a rom_enable() function to via/vt8231 and call it from via/epia/romstage.c | Uwe Hermann |
2010-11-02 | Need to clear downstream read cycle retry bit, or the bus scan will | Tobias Diedrich |
2010-11-02 | This adds pci device ids and pci_driver structs for the K8T890 CF | Tobias Diedrich |
2010-10-29 | Use common code to set PCI subsystem in mcp55. | Jonathan Kollasch |
2010-10-29 | Deduplicate ck804 subsystem-setting functionality. | Jonathan Kollasch |
2010-10-28 | The no point in having a non-NULL ops_pci pointer when the set_subsystem oper... | Jonathan Kollasch |
2010-10-28 | Fix broken build due to missing #if CONFIG_IOAPIC. | Uwe Hermann |
2010-10-28 | Add IOAPIC support for Intel 82371EB and fixup SMP on ASUS P2B-D. | Uwe Hermann |
2010-10-27 | Correct an apparent copy-paste error that shows up at compile time on | Jonathan Kollasch |
2010-10-27 | Convert ck804_early_smbus.c to a separately compiled unit. | Jonathan Kollasch |
2010-10-26 | Convert some comments to proper Doxygen syntax. | Uwe Hermann |
2010-10-26 | Convert all ck804-based boards to tiny bootblock. | Jonathan Kollasch |
2010-10-26 | Move bcm5785_enable_rom.c include to where it's used. | Patrick Georgi |
2010-10-26 | When gcc 4.5.0 is used, compiling mcp55_early_setup_car.c fails. This change ... | Scott Duplichan |
2010-10-24 | Running a checked build of Windows is needed for understanding its various BI... | Scott Duplichan |
2010-10-20 | Revert sblk/sblink change, use sblk like the rest of the codebase does. | Uwe Hermann |
2010-10-19 | Copy ICH4 hard_reset() for 6300ESB. | Jonathan Kollasch |
2010-10-19 | Remove unused variables from 6300ESB smbus_write_block(). | Jonathan Kollasch |