summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Expand)Author
2014-07-14AGESA CIMx: Move late init out of get_bus_conf()Kyösti Mälkki
2014-07-14AMD SPI: Optimise for longer writesKyösti Mälkki
2014-07-14SPI: Split writes using spi_crop_chunk()Kyösti Mälkki
2014-07-12libpayload: find source of input charactersLuigi Semenzato
2014-07-11intel/lynxpoint: Allow to always route USB3 ports to XHCIStefan Reinauer
2014-07-11intel/lynxpoint: Work around XHCI resume issuesDuncan Laurie
2014-07-11intel/lynxpoint: xhci: Revert suspend/resume changesDuncan Laurie
2014-07-11southbridge/amd/rsXY0/cmn.c: Trivial - Style fixesEdward O'Callaghan
2014-07-10AGESA Hudson: Fix build without HAVE_ACPI_RESUMEKyösti Mälkki
2014-07-08southbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-05spi: Change spi_xfer to work in units of bytes instead of bits.Gabe Black
2014-07-05spi: Remove unused parameters from spi_flash_probe and setup_spi_slave.Gabe Black
2014-07-05intel/lynxpoint: Build intermediate step to add Lynx Point ME imageDuncan Laurie
2014-07-05intel/lynxpoint: xhci: Port reset changes on suspend/resumeDuncan Laurie
2014-07-05intel/lynxpoint: Export pch_enable_lpc() for Super I/O systemsStefan Reinauer
2014-07-04intel/lynxpoint: Add SATA DEVSLP disable optionMarc Jones
2014-07-04intel/lynxpoint: Add CONFIG_LOCK_MANAGEMENT_ENGINE entry to KconfigDuncan Laurie
2014-07-04intel/lynxpoint: Use separate SMI callback for USB XHCI routingDuncan Laurie
2014-07-04intel/lynxpoint: Make inclusion of Intel ME optionalPaul Menzel
2014-07-04intel/lynxpoint: Allow building without IFD (descripter.bin)Paul Menzel
2014-07-03AGESA: Clean separation of SPI flashKyösti Mälkki
2014-07-02AMD/agesa: Add functions for AMD PCI IRQ routingDave Frodin
2014-07-01stdlib: Drop duplicates of min() and max()Kyösti Mälkki
2014-06-29southbridge/intel/ibexpeak/me.c: Silence warns about unused funcEdward O'Callaghan
2014-06-25intel/lynxpoint: xhci: Update magic bits to new magic valuesDuncan Laurie
2014-06-25AGESA: Move config parameters for non-volatile S3 dataKyösti Mälkki
2014-06-25Declare acpi_is_wakeup_early() only onceKyösti Mälkki
2014-06-21AMD cimx/sb800: Use acpi_is_wakeup_s3()Kyösti Mälkki
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
2014-06-20southbridge/intel/lynxpoint/me_9.x.c: Use IS_ENABLED macroEdward O'Callaghan
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
2014-06-12southbridge/amd: Change #if defined to #if IS_ENABLEDDave Frodin
2014-06-12intel/bd82x6x: Skip unknown MBP.Vladimir Serbinenko
2014-06-11amd/southbridge/lpc: SPI BAR has fixed size/locationDave Frodin
2014-06-11ibexpeak: Set number of USB ports.Vladimir Serbinenko
2014-06-11ibexpeak: Remove some dead code.Vladimir Serbinenko
2014-06-11AMD/CIMx: Add functions for AMD PCI IRQ routingMike Loptien
2014-06-11amd/hudson: Add the IOAPIC space to the fixed resources tableDave Frodin
2014-05-25southbridge/amd/agesa/hudson: Unused func smbus_delay()Edward O'Callaghan
2014-05-25southbridge/amd/cimx/sb900: Unused func smbus_delay()Edward O'Callaghan
2014-05-22southbridge/amd/cimx/sb700: Unused func smbus_delay()Edward O'Callaghan
2014-05-22southbridge/amd/sb700/smbus.c: Unused func smbus_delay()Edward O'Callaghan
2014-05-17build: separate CPPFLAGS from CFLAGSPatrick Georgi
2014-05-17build: CPPFLAGS is more common than INCLUDESPatrick Georgi
2014-05-14southbridge/amd/cimx/sb800: Unused func smbus_delay()Edward O'Callaghan
2014-05-13src/*: Remove the last remnants of struct keyboardEdward O'Callaghan
2014-05-13src/drivers/pc80: Remove empty struct keyboardEdward O'Callaghan
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
2014-05-09cougar_canyon2: Switch CPU/NB/SB to the shared FSP codeMartin Roth
2014-04-29AGESA SPI: Fix Kconfig optionsKyösti Mälkki
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
2014-04-21southbridge/hudson: Initialize ACPI IO ports separate of FADTAlexandru Gagniuc
2014-04-21AMD hudson and yangtze boards: Let mainboard declare power buttonAlexandru Gagniuc
2014-04-20southbridge/hudson: Remove redundant definitions of ACPI IO portsAlexandru Gagniuc
2014-04-20southbridge/amd/agesa/hudson: Refactor SPI controller driverAlexandru Gagniuc
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
2014-04-20AMD cimx sb700/sb800/sb900: Fix NODE_PCI and use of MAX_PHYSICAL_CPUSKyösti Mälkki
2014-04-18southbridge/hudson: Compile refactored SMI setup utilities in SMMAlexandru Gagniuc
2014-04-18southbridge/sb800: Strip obsolete commentaryEdward O'Callaghan
2014-04-17southbridge/hudson: Remove unused function set_sm_enable_bits()Alexandru Gagniuc
2014-04-17southbridge/hudson: Add support for ACPI enable/disable via SMIAlexandru Gagniuc
2014-04-17southbridge/hudson: Pass GEVENT SMIs to mainboard_smi_gpi()Alexandru Gagniuc
2014-04-17southbridge/amd/agesa/hudson: Add initial support for SMMAlexandru Gagniuc
2014-04-16southbridge/hudson: Use MMIO instead of PIO to access PM spaceAlexandru Gagniuc
2014-04-15southbridge/amd/agesa/hudson: Clean up AGESA #includesAlexandru Gagniuc
2014-04-13hudson boards: Don't require ide.asl file on boards without IDEAlexandru Gagniuc
2014-04-13cimx/sb800/cfg.c: Cut out purposeless ROM reading noise.Edward O'Callaghan
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
2014-04-11intel/*bd82x6x/acpi/pch.asl: Correct name of field unit to GP03Paul Menzel
2014-04-09lynxpoint: Fix SerialIO ACPI compile issue with recent IASLDuncan Laurie
2014-04-09sb/amd/amd8111/acpi.c: Remove set but unused variable `dword`Paul Menzel
2014-04-06amd/agesa/hudson: Implement PNP resource setup in LPC bridgeRudolf Marek
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
2014-03-04ibexpeak/ehci: Set .enable_resources properly.Vladimir Serbinenko
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
2014-02-20ibexpeak/thermal: set temperature target in early init.Vladimir Serbinenko
2014-02-19ibexpeak/lpc: Fix PCIIDs.Vladimir Serbinenko
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
2014-02-17vortex86ex: Drop baudrate programming for 10 UARTsKyösti Mälkki
2014-02-17ibexpeak/azalia: Remove C4-register extended init.Vladimir Serbinenko
2014-02-17ibexpeak/sata: Add PCI ID from Easynote LM.Vladimir Serbinenko
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
2014-02-12lynxpoint: Do not put SerialIO devices into D3Hot in ACPI modeDuncan Laurie
2014-02-11amd/cimx: fix sb(8|9)00 NULL type redefineAaron Durbin
2014-02-10usbdebug: Remove duplicate port claimKyösti Mälkki
2014-02-06uart8250: Drop includes in superioKyösti Mälkki
2014-02-06uart8250: Drop unused declarationsKyösti Mälkki
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
2014-02-06usbdebug: Drop obsolete codeKyösti Mälkki
2014-02-04AMD cimx/sb800: Set SPI frequency and prefetchKyösti Mälkki
2014-02-01AMD hudson and yangtze: add IMC fan control supportWANG Siyuan
2014-02-01ibexpeak: add smbus_write_byteVladimir Serbinenko
2014-02-01bd82x6x: Add smbus_write_byteVladimir Serbinenko
2014-01-23sandy/ivy SPI: Support hardware sequencing and use with multiple chipsVladimir Serbinenko
2014-01-23dmp/vortex86ex: Initialize I2C controller base address/IRQAndrew Wu
2014-01-23X201: Enable expresscard hotplug.Vladimir Serbinenko
2014-01-23nehalem: Fix SMRAM register addressVladimir Serbinenko
2014-01-23Ibexpeak: add missing thermal init.Vladimir Serbinenko
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 05:30:20 +0000