summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2015-11-20southbridge/amd: add support for Bolton FCHFelix Held
The Bolton FCH needs different firmware files than the Hudson FCH. A small patch to vendorcode is probably needed to make the XHCI controller work. XHCI_DEVID in pci_devs.h is probably wrong for Hudson. Change-Id: Ib81c0881979edcde717217dc89d8af415520d7e5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/9623 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-20AMD Bettong: refactor PCI interrupt tableWANG Siyuan
1. Use write_pci_int_table to write registers 0xC00/0xC01. 2. Add GPIO, I2C and UART interrupt according "BKDG for AMD Family 15h Models 60h-6Fh Processors", 50742 Rev 3.01 - July 17, 2015 3. The interrupt valudes are moved from bettong/mptable.c. All devices work in Windows 10. Change-Id: Iad13bc02c84a5dfc7c24356436ac560f593304d7 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/11746 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-11-19AMD Hudson: Use amdfwtool to integrate firmwares.Zheng Bao
Change-Id: Ie17a744b6ef4e5405b3dfcecc1deb6462220ec60 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/12435 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-19x86: Add Kconfig to disable early bootblock postcodesMartin Roth
The Intel cave creek chipset needs to have port 80 routing configured before any post codes can be sent to port 80h. Sending post codes out before the routing is done will hang the system. This patch allows us to disable the first couple of post codes that go out before the routing can be configured. The Kconfig symbol is selected by the cave creek chipset (fsp_i89xx). Change-Id: I9bf41669ec32744f87a1ed2de011d31c72ea38da Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12422 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: York Yang <york.yang@intel.com>
2015-11-15src/southbridge/amd/sr5650: Always configure lane director on startupTimothy Pearson
On the ASUS KGPE-D16 it was noted that the pin straps did not properly configure the lane director hardware, causing link training failure on NIC B. Forcing coreboot to always reconfigure the lane director on startup resolves this problem. Change-Id: I5b78cef84960e0f42cc3e0406a7031d12d21f3ad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12014 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-15southbridge/amd/sb700: Fix random persistent SATA AHCI drive detection failureTimothy Pearson
Change-Id: I4202a62217a7aaeaba07e4b994a350e83e064c9c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12001 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Fix SATA port 4/5 drive detectionTimothy Pearson
Change-Id: I01481f25189d01b6f4ed778902b2ecc4d39c7912 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Recover if AHCI disk detection failsTimothy Pearson
The SB700 silicon is somewhat buggy; if the links come up in an incorrect state after POR the silicon cannot automatically recover. If a disk fails to come online, reset the associated link and try disk detection again. Change-Id: I29051af5eca5d31b6aecc261e9a48028380eccb3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11999 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12src/southbridge/amd/sb700: Reset SATA controller in AHCI mode during startupTimothy Pearson
In AHCI mode SeaBIOS randomly fails to detect disks (AHCI timeouts), with the probability of a failure increasing with the number of disks connected to the controller. Resetting the SATA controller appears to show the true state of the underlying hardware, allowing the drive detection code to attempt link renegotiation as needed. Change-Id: Ib1f7c5f830a0cdba41cb6f5b05d759adee5ce369 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11998 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-12southbridge/amd/sb700: Do drive detection even in AHCI modeTimothy Pearson
SeaBIOS AHCI drive detection randomly fails for drives present on the secondary channel of each AHCI SATA BAR. Forcing native drive detection in AHCI mode resolves this issue. Change-Id: I34eb1d5d3f2f8aefb749a4eeb911c1373d184938 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11997 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Add option to disable SATA ALPMTimothy Pearson
The AMD Register Programming Reference states that the user should have the option to disable Active Link Power Management for two reasons. First, some drives may not function correctly with the ALPM implementation of the SP5100, and second there are some situations where low latency access is more important than the power savings created by using ALPM. Allow the user to disable ALPM if desired. Change-Id: I88055cbb4df4d7ba811cef7056c0a6ca2612fcb0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11993 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11cpu/amd: Add CC6 supportTimothy Pearson
This patch adds CC6 power save support to the AMD Family 15h support code. As CC6 is a complex power saving state that relies heavily on CPU, northbridge, and southbridge cooperation, this patch alters significant amounts of code throughout the tree simultaneously. Allowing the CPU to enter CC6 allows the second level of turbo boost to be reached, and also provides significant power savings when the system is idle due to the complete core shutdown. Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11979 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11southbridge/amd/sb700: Fix build failure from merging patches out of orderTimothy Pearson
Change-Id: Ib6d1be64691cf5a1c0b7464284fbae4e583f383e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12402 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11southbridge/amd/sb700: Disable broken SATA MSI functionalityTimothy Pearson
Change-Id: I4e0a52eb90910604f8640ad7533b5d71be6c8e20 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11983 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11southbridge/amd/sb700: Indicate iSATA/eSATA port typeTimothy Pearson
Change-Id: I8ee757d07c82c151b36def6b709163ff144d244f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11984 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11southbridge/amd/sb700: Add AHCI supportTimothy Pearson
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10southbridge/intel: Add FSP based i89xx southbridge supportMarc Jones
The Intel i89xx is a communications chipset that pairs with Sandy(Ivy)bridge processors. It has a lot in common with the bd82x6x chipset, but fewer devices and options. Change-Id: I11bcd1edc80f72a1b2521def9be0d1bde5789a79 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12166 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-06amd binaryPI: Fix usbdebugKyösti Mälkki
EHCI functions have moved. Change-Id: I47e79d3790b272b0fc322d534de733889679622b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/12264 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-11-06AGESA BiosCallouts: Remove castKyösti Mälkki
This cast only hides errors in matching the API properly. Change-Id: Ic396dfb572a50ac5ce5c1c83424e1f17f15bad1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/12270 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7108 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-04sb/intel/bd82x6x: Assign unique bus/dev/fn for I/O APIC + HPETsNico Huber
Assign unique bus/dev/fn values for the I/O APIC and each HPET. The values are taken from an example DMAR table. They are used as source-id for MSI requests and as completer-id for reads from the device' MMIO space [1, 2]. The former is usefull for source-id verfication during interrupt remapping. [1] Intel 6 Series Chipset and Intel C200 Series Chipset Datasheet Document-Number: 324645 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) Datasheet Document-Number: 326776 Change-Id: Ib46f8cfb7d966dd1cf2b026f671bc45ffcc43d25 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12193 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31southbridge/amd/sb700: Remove acpi_get_sleep_type for early CBMEMTimothy Pearson
The acpi_get_sleep_type function in SB700 ramstage is only needed for boards / CPUs that require late CBMEM initialization. Providing this function in early CBMEM-compatible boards breaks building of the ACPI S3 code due to multiple definitions of acpi_get_sleep_type. Change-Id: Ieebc2640a586812e3e2bfd410987205d64147314 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12267 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop southbridge intel/esb6300Stefan Reinauer
All mainboards using this southbridge have been removed from the tree already. Change-Id: I4398ef1e270bd0f36c5dd1c6ec3bfec6c2c091e6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12238 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop southbridge intel/i82801cxStefan Reinauer
All boards using this southbridge have been removed from the tree already. Change-Id: I08269931d845d1f57b34174238bcce245ad77894 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30More Hudson 64bit fixesStefan Reinauer
Change-Id: I2a6cd7ad27cb6d16dfe3267ea6fb844a5e2e20c6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11083 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30SB900 64bit fixesStefan Reinauer
Change-Id: I5ea0f9338ccdd658b5fbec72aa35b4f80d63d4f9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11084 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30SB700: 64bit fixesStefan Reinauer
Change-Id: Ib4b643441a5b887abf73cc55930ea9b01037f6ea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11085 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Hudson: Port to 64bitStefan Reinauer
Bring http://review.coreboot.org/#/c/10582/ to Hudson Change-Id: I1ba3047699c304a769215fe901dc3511bf23199d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11022 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30southbridge/nvidia/ck804: Fix FIDVID build failure on CK804Timothy Pearson
Change-Id: I74c285ff86993898e0120170cf07f48ef4dc9612 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12225 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-29amd/cimx/sb800/late.c: Add comment in `sb800_init()`Paul Menzel
Add a comment explaining what `abcfg_reg(0xc0, 0x01FF, 0x0F4)` does. This is a follow-up for commit 24501cae (AMD cimx/sb800: Initially enable all GPP ports). Change-Id: I5ac263ee088d36a7f7a2d03c1454ed647faa7147 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12190 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-29amd/sb700: clean up recommended changesMartin Roth
This patch addresses changes requested to commit 85c39a4c (southbridge/amd/sb700: Add Suspend to RAM (S3) support) - remove unused/commented out code - remove unnecessary guards around acpi_get_sleep_type() Change-Id: I2878e038d2f9f8d182615e1f4a75ddce5c45d5f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12206 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-29southbridge/nvidia/ck804: Fix boot hang on ASUS KFSN4-DRE w/ K8 CPUTimothy Pearson
Change-Id: Ie4b74f6d63c323ca499a6890defe9b8afe83ea96 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12209 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27southbridge/amd/sb700: Add Suspend to RAM (S3) supportTimothy Pearson
Change-Id: Ic643e31b721f11a90d8fb5f8c8f8a3b7892c0d73 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-26southbridge/amd/sr5650: Add AMD Family 15h CPU supportTimothy Pearson
Change-Id: I88203907270db1a268bd377151f15c24fca1efdc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25southbridge/amd/sb700: Add option for last power state after failureTimothy Pearson
Change-Id: Ieb27bd51dfd45dd15d24a576865d38180a07444e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12175 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-25southbridge/amd/sb700: Set up uninitialized devices in early bootTimothy Pearson
LPC decodes were not enabled, leading to a failure of POST 80 cards and similar debugging devices. Enable the relevant LPC decodes to allow debugging. Additionally, the SMBUS controllers were not properly set up. Enable both the primary and auxiliary controllers. Finally, K10 and higher CPUs were hanging during boot due to a misconfigued IOAPIC. Properly configure the IOAPIC. Change-Id: I9ffb6542ce445ac971fb81f4f554e7f1313e6a98 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12177 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Fix hardcoded printk() function names in pcie.cTimothy Pearson
Change-Id: Idf1db091f1d1e40ce2f248bc25d662cf9608b27e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12179 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Fix boot hang on ASUS KGPE-D16Timothy Pearson
Change-Id: I1d7d6715663a13ab94fd6d71808e35f0f7384d00 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11938 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700/acpi: Add IDE / SATA ASL codeTimothy Pearson
Change-Id: I507c93556dd66c3590c8ca11c06cd5b2dd7884c5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12176 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sr5650: Fix boot failure on ASUS KGPE-D16Timothy Pearson
Change-Id: Ia13ba58118a826e830a4dc6e2378b76110fcabad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11939 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Add optional delay after link trainingTimothy Pearson
Certain devices (such as the LSI SAS 2008 controller) do not respond to PCI probes immediately after link training. If it is known that such a device is likely to be installed allow the mainboard to insert an appropriate delay. Change-Id: Ibcd9426628cacd6f88e6e3fcbc2b3eb7e3a92081 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11991 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-24amd/agesa/hudson: Add support for hiding the USB1.1-only OHCITobias Diedrich
The hudson chipset has 4 USB controllers, the fourth is USB1.1-only and (presumably) not used very often, add support for hiding it: 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) USB1 (3.0, XHCI) 00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB2 (2.0, OHCI+EHCI) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB3 (2.0, OHCI+EHCI) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB4 (1.1, OHCI only) Change-Id: I804e7852fd0a6f870dd118b429473cb06ebac9a4 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7355 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23southbridge/amd/sr5650: Fix GPP3a link training in higher width modesTimothy Pearson
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11990 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-22Revert "Remove sandybridge and ivybridge FSP code path"Martin Roth
Please don't remove chipsets and mainboards without discussion and input from the owners. Someone was asking about cougar canyon 2 just a couple of weeks ago - there's obviously still interest. This reverts commit fb50124d22014742b6990a95df87a7a828e891b6. Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/12128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-16intel/southbridge/bd82x6x: Add option to set SPI VSCC registersNico Huber
These are needed for the hardware-sequencing function of the PCH SPI interface. Values are specific to the flash chip used on a board. Change-Id: Id06766b4bac2686406bc09b8afa02f311f40dee7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11798 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-10-16southbridge/amd/sr5650: Remove unnecessary register configurationTimothy Pearson
Do not hardcode the CPU downstream non-posted request limit; the value of this register is CPU family specific and is set appropriately in the corresponding CPU driver code. Change-Id: I432b942f114243cba23c9a8d916cf6d07bc4740b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11935 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-14Revert "Remove FSP Rangeley SOC and mohonpeak board support"Martin Roth
This chip is still being used and should not have been deleted. It's a current intel chip, and doesn't even require an ME binary. This reverts commit 959478a763c16688d43752adbae2c76e7764da45. Change-Id: I78594871f87af6e882a245077b59727e15f8021a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11860 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-07x86/bootblock: Use LDFLAGS_bootblock to enable garbage collectionAlexandru Gagniuc
The x86 bootblock linking is a mess. The bootblock is treated in a very special manner, and never received the update to link-time garbage collection. On newer x86 platforms, the boot media is no longer memory-mapped. That means we need to do a lot more setup in the bootblock. ROMCC is unsuitable for this task, and walkcbfs only works on memory-mapped CBFS. We need to revise the x86 bootflow for this new case. The approach this patch series takes is to perform CAR setup in the bootblock, and load the following stage (either romstage or verstage) from the boot media. This approach is not new, but has been done on our ARM ports for years. Since we will be adding .c files to the bootblock, it is prudent to use link-time garbage collection. This is also consistent to how we do things on other architectures. Unification FTW! Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11781 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-03Remove FSP Rangeley SOC and mohonpeak board supportAlexandru Gagniuc
mohonpeak is the reference board for Rangeley. I doubt anyone uses it or cares about it. We jokingly refer to it as "Moron Peak". It's code with no known users, so we shouldn't be hauling it around for the eventuality that someone might use it in the future. Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11790 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03Remove sandybridge and ivybridge FSP code pathAlexandru Gagniuc
We already have two other code paths for this silicon. Maintaining the FSP path as well doesn't make much sense. There was only one board to use this code, and it's a reference board that I doubt anyone still owns or uses. Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11789 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03sandybridge ivybridge: Treat native init as first class citizenAlexandru Gagniuc
This is a sad story. We have three different code paths for sandybridge and ivybridge: proper native path, google MRC path, and, everyone's favorite: Intel FSP path. For the purpose of this patch, the FSP path lives in its own little world, and doesn't concern us. Since MRC was first, when native files and variables were added, they were suffixed with "_native" to separate them from the existing code. This can cause confusion, as the suffix might make the native files seem parasitical. This has been bothering me for many months. MRC should be the parasitical path, especially since we fully support native init, and it works more reliably, on a wider range of hardware. There have been a few board ports that never made it to coreboot.org because MRC would hang. gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so the effort was abandoned at first. Once the native path became available, the effort was restarted and the board is now supported. In honor of the hackers and pioneers who made the native code possible, rename things so that their effort is the first class citizen. Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11788 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-09-30AMD Bettong: Fix usb device in devicetree for Carrizozbao
Add some missing devices to device tree and header. Remove the obsolete devices. Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11378 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-09-16Move final Intel chipsets with ME to intel/common/firmwareMartin Roth
This switches the final 4 Intel platforms that use ME firmware from using code specific to the platform to the common IFD Kconfig and Makefile. braswell, broadwell, bd82x6x (cougar point & panther point) and ibexpeak Change-Id: Id3bec6dbe2e1a8a90f51d9378150dbb44258b596 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10876 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
The build system was previously determining the flow and linking scripts bootblock code by the order of files added to the bootblock_inc bootblock-y variables.Those files were then concatenated together and built by a myriad of make rules. Now bootblock.S and bootblock.ld is added so that bootblock can be built and linked using the default build rules. CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the chipset code to place include files in the path of the bootblock program -- a replacement for the chipset_bootblock_inc make variable. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built vortex, rambi, and some asus boards. Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11495 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
coreboot has no CREDITS file. Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11514 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-04bootstate: remove need for #ifdef ENV_RAMSTAGEAaron Durbin
The BOOT_STATE_INIT_ENTRY macro can only be used in ramstage, however the current state of the header meant bad build errors in non-ramstage. Therefore, people had to #ifdef in the source. Remove that requirement. Change-Id: I8755fc68bbaca6b72fbe8b4db4bcc1ccb35622bd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11492 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-04intel/common/firmware: Add common GBE rom supportMartin Roth
Add support to the Intel common firmware Kconfig and Makefile.inc to allow the Gigabit Ethernet (GBE) blob to be added to the final binary. Change-Id: Id5fab3061874dad759750b67d3339eb8c99a62d6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10875 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-09-02southbridge/ibexpeak: use new ssdt sata port generatorAlexander Couzens
Drop old incomplete, broken and hardcoded sata.asl properties. The new sata acpi generator only needs a proper defined device. Change-Id: Id3eca5551a070dfdd6fa674e1d5b6627e28ab5a7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9710 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-09-02southbridge/bd82x6x: use new ssdt sata port generatorAlexander Couzens
Drop old incomplete, broken and hardcoded sata.asl properties. The new sata acpi generator only needs a proper defined device. Change-Id: I2be76097ebd27f2529e3fbbecefd314a0eea3cb0 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9709 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-08-19AMD ROMSIG: Only check location if ROMSIG is usedMartin Roth
The location of the AMD ROMSIG binary was being checked and warnings were being printed even when the ROMSIG file wasn't being used. These false warnings are avoided by moving the warnings into the block where the CBFS file for the ROMSIG is generated. Change-Id: Ie44a2ad97ff3b15df6dc9b8166992de6ed837997 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11161 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-17AMD Binary PI: Fix the build when the user's group has a spaceDan Christensen
When the user's primary group contains a space ls -l and awk get the wrong value for the file size. This results in padding the coreboot_psp_directory_combine_pubkey.bin file too much which ultimately means RtmPubSigned.key can not be placed at the necessary offset. Changing from ls -l to ls -ln seemed like the most minimal, POSIX-friendly way to effect this change. Change-Id: Icbeaad476753924626adb6de53dc9a30052d91a6 Signed-off-by: Dan Christensen <opello@opello.org> Reviewed-on: http://review.coreboot.org/11242 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-09amd8111, ck804, mcp55: use CONFIG_HPET_ADDRESSJonathan A. Kollasch
As acpi_write_hpet() uses CONFIG_HPET_ADDRESS in the HPET table we need to use CONFIG_HPET_ADDRESS when assigning it to the device. Change-Id: I656f917658f1c1717bb3653fa048a6d36fca2454 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10925 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09license headers: Drop FSF addresses againPatrick Georgi
Some FSF addresses found their way back into our tree. Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11145 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-30SB800: Port to 64bitStefan Reinauer
Change-Id: I944fb254e9470c80b13c9eef9d6b1177a56e615f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10582 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30AMD binary PI: add southbridge support for fan controlWANG Siyuan
1. Add functions to support fan control. 2. When IMC firmware is added, the current firmwares' layout cause build error. There is not enough space to add some firmwares, so HUDSON_PSP_OFFSET is added to fix this problem. Change-Id: Ie470a88cb9da256d9f72ea56bf268c15df195784 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10720 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-23nvidia southbridges: don't touch 0x78 in LPC bridge with Fam10hJonathan A. Kollasch
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC bridge register 0x78 (particularly the 0x7b byte) to get to ramstage: Assume that there's something about this register that adjusting it the way we do for K8 is something that can/should be universally avoided on all Fam10h systems with these chipsets. Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10984 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-07-21amd/hudson: Fix makefile FWM location checkMarc Jones
Fix typo. Use the correct math helper int-lt. Change-Id: Ia5e722020c75595dfcfb853ea8238fb8391f9a04 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10980 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-18amd/pi: Increase assumption for maximum CBFS file header sizePatrick Georgi
The new attributes increase the header size, breaking this assumption. Change-Id: Ib23862f27650b39133deafb74a24327b098b6e86 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10942 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-14azalia: fix up and clean up shrinkage of boilerplate codeJonathan A. Kollasch
Should fix regression in HDA verb setup on nvidia mcp55 and intel sch southbridges. The mcp55 code could not find the mainboard's verb table because the table was not even being compiled in. The sch boards appeared to have the same issue. Intel broadwell and fsp_bd82x6x seemed to have not gotten the boilerplate shrink, so apply it to those too. Followup-to: Ib3e09644c0ee71aacb067adaa85653d151b52078 (azalia: Shrink boilerplate) Change-Id: If7aae69f5171db67055ffe220bdff392caaa5d9f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10826 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14amd/rs780: Fix typoPatrick Georgi
Change-Id: I08f7251f8fc42b9028b1fdb830546f9922ef43aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: YongGon Kim <ilios86@gmail.com> Reviewed-on: http://review.coreboot.org/10914 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2015-07-12Verify Kconfigs symbols are not zero for hex and int type symbolsMartin Roth
For hex and int type kconfig symbols, IS_ENABLED() doesn't work. Instead check to make sure they're defined and not zero. In some cases, zero might be a valid value, but it didn't look like zero was valid in these cases. Change-Id: Ib51fb31b3babffbf25ed3ae4ed11a2dc9a4be709 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-12southbridge/amd/pi/hudson: Fix HUDSON_DISABLE_IMC kconfig warningMartin Roth
Platforms selecting the HUDSON_DISABLE_IMC symbol were showing the warning: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_AMD_AGESA_BINARY_PI) selects HUDSON_DISABLE_IMC which has unmet direct dependencies (SOUTHBRIDGE_AMD_PI_AVALON || SOUTHBRIDGE_AMD_PI_BOLTON || SOUTHBRIDGE_AMD_PI_KERN) By moving the definition of the symbol outside of the if block and removing the default n, we can get rid of the warning without changing the value for any platform. Change-Id: I5c1bdfbcf3c5c44ee05b8c5e679f6854d784d8dc Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10680 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2015-07-12Change #ifdef and #if defined CONFIG_ bools to #if IS_ENABLED()Martin Roth
Kconfigs symbols of type bool are always defined, and can be tested with the IS_ENABLED() macro. symbol type except string. Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-11amd/.../hudson: Warn if HUDSON_FWM_POSITION is not inside CBFSMartin Roth
Display a warning if CONFIG_HUDSON_FWM_POSITION is not inside CBFS. This can be extended to other Kconfig values for CBFS. Change-Id: I2423f7b361dda8aac5dab409fa7b656de486f635 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10683 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-11Calculate HUDSON_FWM_POSITION and display warning on mismatchMartin Roth
This patch calculates the address where the chipset firmware descriptor should be located and compares it against the actual value from Kconfig. If the two don't match, it puts up a warning. This could probably replace the config variable completely, but I wanted to see how other people felt before doing that. I seem to recall that the value used to be calculated, so I figure that there must be a reason it's done this way at this point. If we do want to keep the Kconfig setting, this patch could also be modified to just verify that the HUDSON_FWM_POSITION is inside the ROM space. Change-Id: I94addf463e2c694a94eef218ec855103a3bb5da5 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10682 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07timestamp: remove conditional #if CONFIG_COLLECT_TIMESTAMPSAaron Durbin
Empty functions are provided when !CONFIG_COLLECT_TIMESTAMPS so stop guarding the compilation. BUG=None BRANCH=None TEST=Built Original-Change-Id: Ib0f23e1204e048a9b928568da02e9661f6aa0a35 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228190 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9aa69fd43d77f5f7acdc9f361016c595dd16104e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I14418c8ef3ccb57ac6fce05b422e1c21b1d38392 Reviewed-on: http://review.coreboot.org/10742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-02ME/IFD binaries: Implement sane defaults for file pathsStefan Reinauer
Change-Id: I81298aca07c18359e8e4bf5b2d8926d6b45a30c5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10763 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-02ifdfake: Add prompts and help for the regions in KconfigMartin Roth
Update the ifdfake region questions in Kconfig with help descriptions and prompts to allow values to be entered and not just use pre-defined default values. Change-Id: Ifdffadc3d74ec49492c2ded66623a1be6945425f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10649 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Intel Firmware Descriptor: Add Lock ME Kconfig questionMartin Roth
Add the Kconfig question to allow the user to lock the ME section using ifdtool. Change-Id: I46018c3bc9df3e309aa3083d693cbebf00e18062 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Move baytrail & fsp_baytrail to the common IFD interface.Martin Roth
- Add the common/firmware subdir to the baytrail & fsp_baytrail makefiles and remove the code it replaces. - Update baytrail & fsp_baytrail Kconfigs to use the common code. - Update the IFD Kconfig help and prompts for the TXE vs ME. - Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail platforms have their own defaults. Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10647 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Intel Firmware Descriptor Kconfig: remove USES_INTEL_MEMartin Roth
When I added the common IFD Kconfig and Makefile, My thinking was that I could use this symbol to differentiate between the ME and the TXE, and to exclude the ME questions from platforms that use the IFD, but don't use an ME, like Rangeley. In practice this made things a lot more complicated and isn't worth it. Change-Id: I4428744e53c6bb7fc00a4fa4f0aa782c25fc9013 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-25amd/pi/hudson: Fill ROMSIG with 0xFF instead of 0zbao
Besides the first five DWORDs, the offsets 0x40 & 0x41 are used to save SPI settings. They should only be 0xFF for being written. Other parts in ROMSIG are also changed to 0xFF for potential requirement. Change-Id: I61ea8295d5ee8ffbbd0cfcf9e4bece770d70e1f2 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/10651 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24sandy/ivy: Include IRQ routes from platformKyösti Mälkki
The default route does work for all Chromebooks and is replaced with platform-specific one in follow-up. Change-Id: Ia1839ed38dacf44a89dc757394d054e17666f193 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10442 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-23southbridge/intel: Create common IFD Kconfig and MakefileMartin Roth
We've got a lot of duplicated code to set up the IFD/ME/TXE/GBE/ETC. This is the start of creating a common interface for all of them. This also allows us to reduce the chipset dependencies for CBFS_SIZE. Change-Id: Iff08f74305d5ce545b5863915359eeb91eab0208 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10613 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23AMD Kern: Fix path of PspSecureOs BLOBWANG Siyuan
AMD Kern uses PspSecureOs_prod_CZ.csbin rather than PspSecureOs_prod_CZ.sbin. PspSecureOs_prod_CZ.csbin is the firmware in CarrizoPI v1.0.0.7. Change-Id: Idf54ee808dd6965aec9b979be00b7f890a88b06d Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10639 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-22Remove incorrect Kconfig expressionsMartin Roth
The symbols used in these expressions were not correct and would never evaluate as true. Change-Id: Ia20177f41505473b14bc7b8e4b6fb16de36cc295 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10437 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-15ck804 ACPI: set duty width in FADT correctlyJonathan A. Kollasch
Change-Id: I12ef633009b5c63b08fbeb76d58cb08c776485ac Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10546 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-14amd/cimx/sb800/acpi/smbus.asl: Align commentsPaul Menzel
Change-Id: I1ea1b1efedfea2926a24f06beeb8d7d0464057e5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10543 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-13southbridge/amd/pi: Add support for new AMD southbridge KernWANG Siyuan
Kern is the southbridge of AMD Merlin Falcon(Carrizo). This add support of HD audio, lpc, sata and usb for Kern. Change-Id: Ie47e38bc1099cdb72002619cb1da269f3739678b Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10418 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10AMD PI: remove unuseful ACPI codeWANG Siyuan
sata.asl and superio.asl are empty files. Remove them. Change-Id: Icd3e990aa713281e46dcbd8e0847166c77656b1c Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10505 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-10model_2065x: Use common i945-ivy TSEG SMM init.Vladimir Serbinenko
Change-Id: I0302cbaeb45a55a4cfee94692eb7372f2b6b206d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10468 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-10fsp_model_206ax: Use common i945-ivy tseg SMM init.Vladimir Serbinenko
Change-Id: Iac390b565d709b11bc7a6631b11315994b6e2c3c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10466 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>