summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2009-10-08Disable x86emu for via based boards which bringPatrick Georgi
their own vgabios.c Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07Enable full ROM access on AMD CS5530(A) (needed for CBFS).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04The new CBFS based build system requires the whole ROM to be accessibleUwe Hermann
in very early stages, otherwise the boot may hang like this because the CBFS headers cannot be found/accessed: Uncompressing coreboot to RAM. Jumping to image. Check CBFS header at fffedfe0 magic is ffffffff ERROR: No valid CBFS header found! CBFS: Could not find file fallback/coreboot_ram Jumping to image. This patch enables full ROM access on all 440BX boards right after the serial init (and before CBFS headers are parsed). Build-tested and runtime-tested on ASUS P2B-F. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4721 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
Both were only really used in pre-cbfs, as the payload's size isn't relevant for the build process anymore. Various calculations in {no,}failovercalculation.lb are adapted accordingly. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04Add initial kconfig support for all AMD GX1 boards.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-29Remove some warnings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4686 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-25some progress on kconfig:Patrick Georgi
- northbridges are done - southbridges are done - Intel CPUs are done, with a design that the board only has to specify the socket it has, and the CPUs are pulled in automatically. There is some more cleanup possible in that area, but I'll do that later - a couple more mainboards compile: - intel/eagleheights - intel/jarrell - intel/mtarvon - intel/truxton - intel/xe7501devkit - sunw/ultra40 - supermicro/h8dme - tyan/s2850 - tyan/s2875 - via/epia - via/epia-cn - via/epia-m - via/epia-m700 - via/epia-n - via/pc2500e (PPC not considered, probably overlooked something) All of them only _build_, but some options are probably completely wrong. To be fixed later Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-22src/Kconfig: Remove HT-specific options.Myles Watson
src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE. src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific. src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config. src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config. src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory. src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4657 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-22failoverR.diff: Revert my failover change since Kconfig only supports fallback.Myles Watson
kconfig_s2892.dif: Add support for Tyan s2891, s2892, and s2895 to Kconfig. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4656 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-01As more users of Asus M2V-MX SE emerged. Here is long pending patch I wanted toRudolf Marek
write. It boots the SB/NB V-link performance to full duplex 533MB/s. (in fact x2 for FDX) The default was 266MB/s but half duplex only. If you encourage any stability issues we need to look into fine tuning the bus. The values are VIA recommended. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4625 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-29This is the final set of changes to allow rumba to build. Rumba is notRonald G. Minnich
tested. I also addressed questions raised by Uwe: TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 UDELAY_TSC Are now defined as booleans in src/cpu/x86/Kconfig and can be selected in the mainboard Kconfig. The remaining question of Uwe's is a deeper problem: --- We'll have to check if this works. From a quick glance the Rumba does not have the mmx related lines (which _are_ in Makefile.romccboard.inc, though): crt0-y += ../../../../src/cpu/x86/fpu/enable_fpu.inc crt0-y += ../../../../src/cpu/x86/mmx/enable_mmx.inc crt0-y += auto.inc crt0-y += ../../../../src/cpu/x86/mmx/disable_mmx.inc --- We're going to need a whole variant of this standard mainboard OR we're going to have to make (some) of the unconditional includes above conditional. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4618 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28This patch adds VGA and PS/2 Keyboard/mouse support to the already existing ↵Arnaud Maye
intel truxton (ep80579) dev board. This patch tries to improve the pcie portA configuration. The Matrox G550e PCIe gfx card shipped along with the dev board is supported. Signed-off-by: Arnaud Maye <arnaud.maye@4dsp.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28Add kconfig support for all Intel 82810 (i810) boards.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28This is the beginning of support for Geode and Kconfig in v2. Ronald G. Minnich
It also brings in the vsm from v3, which was a much cleaner cut. Over time, I hope to bring all the code back from v3. I have some rumbas at home and want to use them. I have a patch which comes in next that makes the rumba build. Note that I am holding the src/*/amd/Kconfig patch until these get merged. These have no impact on the current system. Note that this is not complete but I want to fill in the blanks bit by bit. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4611 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28Silence unneeded #warnings, change to code comments (trіvial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-27Added support for the AMD RS690 and SB600 southbridges in KconfigCristi Măgherușan
Signed-off-by: Cristi Măgherușan <cristi.magherusan@net.utcluj.ro> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-27The new resource allocator helped me find a bug in SB600 diagnostics.Carl-Daniel Hailfinger
The SB600 SATA code printed that two BARs had the same address because it didn't mask the correct number of bits in the BAR. Functionality was not affected, but the debug output was incorrect. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-26Remove a couple of CONFIG_ prefixes that shouldn't have happened.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-26Enable Direct TMDS for the RS690, which allows to display on HDMI and DVILibra Li
monitors. Signed-off-by: Libra Li <libra.li@technexion.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4585 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-25Various Kconfig and Makefile.inc fixes and cosmetics.Uwe Hermann
- Whitespace fixes, remove trailing whitespace, use TABs for identation (except in Kconfig "help" lines, which start with one TAB and two spaces as per Linux kernel style) - Kconfig: Standardize on 'bool' (not 'boolean'). - s/lar/cbfs/ in one Kconfig help string. - Reword various Kconfig menu entries for a more usable and consistent menu. - Fix incorrect comment of NO_RUN in devices/Kconfig. - superio/serverengines/Kconfig: Incorrect config name. - superio/Makefile.inc: s/serverengine/serverengines/. - superio/intel/Kconfig: s/SUPERIO_FINTEK_I3100/SUPERIO_INTEL_I3100/. - mainboard/via/vt8454c/Kconfig: Fix copy-paste error in help string. - mainboard/via/epia-n/Kconfig: Fix "bool" menu text. - console/Kconfig: Don't mention defaults in the menu string, kconfig already displays them anyway. - Kill "Drivers" menu for now, it only confuses users as long as it's emtpy. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-24Add support for Nvidia Southbridges to Kconfig.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Harald Gutmann <harald.gutmann@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4566 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-18Add via south support. Correct usage of conditional variables. Ronald G. Minnich
Note the makefile.inc may be out of date given the new commits of code today, but this is what was signed off ... Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4551 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-18Add the rest of the files.Jon Harrison
Thanks Jon. Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4550 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-17Get the Via EPIA-N(L)/CN400 to a reasonable level of maturity::Jon Harrison
Tested on Via EPIA-NL8000EG with FILO payload booting FC9 (2.6.25 kernel) from SATA HDD. ACPI is working for PCI interrupt routing, some memory stuff and Soft-Off. USB/SATA Working VGA Console Working X Working via Onboard AGP Removed dsdt.c, fixed some whitespace. Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12drop extra whitespace at end of line for i945 + ICH7 (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4538 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12This now builds. Ronald G. Minnich
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12Missing files from last patch.Ronald G. Minnich
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4535 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12Kconfig!Patrick Georgi
Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-05Add some more CONFIG_* prefixes that were missing.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4497 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-23sb/via/k8t890: add vga textmode code for k8m890 chrome igp.Luc Verhaegen
Add initialisation for the VIA Chrome 9 IGP on the k8m890 through native code and through the general vga infrastructure i committed a month or two ago. Add videoram_size option for k8m890 and the Asus M2V-MX SE. Now the Asus M2V-MX SE will magically come up with a working standard VGA 80x25 textmode. Many thanks to the people who worked hard on the Asus M2V-MX SE, and all of its components; this vga bringup was a breeze thanks to your hard work for this excellently supported board. And separate thanks to Rudolf Marek for spurring me on and for providing a register dump. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-21Another include file slipped. This gets via/epia-m building again.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4459 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-21Intel ICH7 updatesStefan Reinauer
- code restructuring (move ich7 out of i945) - ACPI fixes - major SMI handler updates - make sure SMBus lives where we expect it - try to get usb debug working Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4456 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-21* cleanup ricoh rl5c476 code:Stefan Reinauer
- drop duplicate udelay function - simplify code flow - some cosmetics on comments Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-20Add legacy I/O region for vt8237r southbridge.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4443 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-20Rename some preprocessor symbols. I have no idea whyPatrick Georgi
those symbols were left alone before, after this, they're somewhat more in line with the rest of the tree. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-14trivial fixes to function declarations (and build system test)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-10Apparently I'm not the only one who forgets which way the outb andEd Swierk
outl arguments go. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4422 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-10This seems to be a more official, common, simple way to check if the CPU is ↵Zheng Bao
dual core or single core. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4415 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-02Move the v3 resource allocator to v2.Myles Watson
Major changes: 1. Separate resource allocation into: A. Read Resources B. Avoid fixed resources (constrain limits) C. Allocate resources D. Set resources Usage notes: Resources which have IORESOURCE_FIXED set in the flags constrain the placement of other resources. All fixed resources will end up outside (above or below) the allocated resources. Domains usually start with base = 0 and limit = 2^address_bits - 1. I've added an IOAPIC to all platforms so that the old limit of 0xfec00000 is still there for resources. Some platforms may want to change that, but I didn't want to break anyone's board. Resources are allocated in a single block for memory and another for I/O. Currently the resource allocator doesn't support holes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Add support for the Intel Eagle Heights development board.Thomas Jourdan
Signed-off-by: Thomas Jourdan <thomas.jourdan@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01I missed three files. Jon Harrison
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19ChangeLog:Harald Gutmann
Add initial ACPI support for M57SLI. Activates/Enables: * native Coreboot ACPI for M57SLI * Soft-Power-Off * PowerNow! * High Precision Event Timer * Windows booting with ACPI support Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05die() does never return. Annotate it as such.Carl-Daniel Hailfinger
Any endless loop after die() can be eliminated. Dereferencing a NULL pointer is bad. die() instead. Replace endless loops with die(). Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-05After I modify the pci_ext_read_config32 and pci_ext_read_config32, the step 6aZheng Bao
starts to play its role. Then the system hangs at HDA init. I dont know what the VC1 is. The RPR says "Optional Features (only needed if CMOS option is enabled)" in 5.10.2. Before I know what it is, I think it is better to skip it. Tested on dbm690t. Add comment from Rudolf, " VC is virtual channel. Its used for isochronous transfer of data to sound card. The virtual channel guarantee "on time" delivery. In other words it sets up a channel for data to sound card, which means that that arrivs in time and there will be no interuptions in audio stream. http://www.microsoft.com/whdc/connect/pci/wlp_interrupt.mspx " Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4339 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-04This patch is about some noticable bugs which was made by no reason.Zheng Bao
1. In rs690_cmn.c, mask the lower 4 bits of the BAR3. No doubt, right? 2. In rs690_pcie.c, (1) Obviously, the mask should be 0xF, and bit 19 should be set to 1 (in comment). In rpr 5.10.2, step 2, step 2.1 & step 2.6 (2) The dynamic buffer allocation is enabled by setting bit 11 of PCIEIND: 0x20, instead of PCIEIND_P: 0x20. In rpr 5.10.2, step 5. Dynamic Slave CPL Buffer Allocation Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4336 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
This reverts commit eb7bb49eb5b48c39baf7a256b7c74e23e3da5660. Stepan pointed out that "s" means string, which makes the following statement in this commit message invalid: "Since we either have reserved space (which we shouldn't do anything with in these two functions), an enum or a hexadecimal value, unsigned int seemed like the way to go." Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Luc Verhaegen <libv@skynet.be> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
To ease some of my debugging pain on the unichrome, i decided i needed to move FB size selection into cmos, so i could test a size and then reset it to the default after loading this value so that the next reboot uses the (working) default again. This meant implementing set_option in parallel to get_option. get_option was then found to have inversed argument ordering (like outb) and passing char * and then depending on the cmos layout length, which made me feel quite uncomfortable. Since we either have reserved space (which we shouldn't do anything with in these two functions), an enum or a hexadecimal value, unsigned int seemed like the way to go. So all users of get_option now have their arguments inversed and switched from using ints to unsigned ints now. The way get_cmos_value was implemented forced us to not overlap byte and to have multibyte values be byte aligned. This logic is now adapted to do a full uint32_t read (when needed) at any offset and any length up to 32, and the shifting all happens inside an uint32_t as well. set_cmos_value was implemented similarly. Both routines have been extensively tested in a quick separate little program as it is not easy to get this stuff right. build_opt_tbl.c was altered to function correctly within these new parameters. The enum value retrieval has been changed strol(..., NULL, 10) to stroul(..., NULL, 0), so that we not only are able to use unsigned ints now but so that we also interprete hex values correctly. The 32bit limit gets imposed on all entries not marked reserved, an unused "user_data" field that appeared in a lot of cmos.layouts has been changed to reserved as well. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03Modify it based on the RPR 5.7.7. Switching GGSP Configuration By Register ↵Zheng Bao
Programming. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-31Following patch moves all vt8237 fadt.c from mainboard/* file to chipsetRudolf Marek
directory just with one common file. Changes to FADT: move to rev4, fix the generic register descriptors, detect additional VT8237S features. Change the compiler to CORE , its revision to 42. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4327 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-29enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx ↵Joseph Smith
southbridge. Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-26ops can not be const because of the pci conf1/conf2 hackery we do. trivialStefan Reinauer
patch, just removes the warnings like coreboot-v2/src/southbridge/intel/i82801xx/i82801xx_ac97.c:73: warning: initialization discards qualifiers from pointer target type Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4302 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-13Oops forgot small part. Set up PIRQs in mainboard Config.lb for IP1000 and ↵Joseph Smith
RM4100 instead of using the ones in i82801xx_lpc.c. Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4278 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-11This patch adds high table support to qemu. It was already added toMyles Watson
src/northbridge/intel/i440bx/ but not to src/cpu/emulation/qemu-x86/northbridge.c It also adds a driver for the ISA device that is found when using 0.9.1 If you look in a log without this patch you won't find the RTC init lines. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4269 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-02Assign PIRQs in mainboard Config.lb or use the default ones listed in ↵Joseph Smith
i82801xx_lpc.c. Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4251 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-02Run dos2unix on all files:Stefan Reinauer
find . -type f| grep -v svn | xargs dos2unix Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-02Trivial, update email address. Joseph Smith
Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-01This is a patch to use another IRQ besides IRQ12 to fix conflicts with i8042 ↵Joseph Smith
- PS/2 Mouse. Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4246 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-30Remove warnings from compilation of the s2892 with and without CBFS.Myles Watson
I didn't try to remove "defined but not used" warnings because there are too many ifdefs to be sure I wouldn't break something. For shadowed variable declarations I renamed the inner-most variable. The one in src/pc80/keyboard.c might need help. I didn't change the functionality but it looks like a bug. I boot tested it on s2892 and abuild tested it. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4240 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-28fix warning: no return statement in function returning non-voidStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4226 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-22This patch adds support for the BCM21000 (aka HT-2100)Mondrian nuessle
PCIe bridge. Signed-off-by: Mondrian nuessle <nuessle@uni-hd.de> Acked-by: Samuel Verstraete <samuel.verstraete@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4182 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-13Fix the build. This error was introduced by change in acpi.c, the ↵Rudolf Marek
acpi_slp_type exists only conditionally. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-13Following patch adds support for resume on VT8237 based motherboards. The NBRudolf Marek
part of this patch adds support for resume well NVRAM. In which DQS values are stored. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-06(trivial) fix some warningsStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4076 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-05two more totalimpact briq fixes. Gets us back to the romfs breakage on PPCStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4073 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-04fix this warning for the embedded planet ep405pcStefan Reinauer
/tmp/ccilLWBf.s: Assembler messages: /tmp/ccilLWBf.s:144: Warning: setting incorrect section attributes for .rodata.pci_driver Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4070 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-21To make use of HAVE_HIGH_TABLES following patch is needed. Also, it movesRudolf Marek
coreboot to 1MB and tries to cache whole range for XIP. The UMA part colide a bit with the HAVE_HIGH_TABLES region. I solved that by relocation of the region. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4024 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-13This, ladies and gentlement, is commit #4000.Stefan Reinauer
Use the (almost) same strict CFLAGS in v2 that we use on v3. And fix a few include files and missing prototypes. Also, fix up the Config-abuild.lb files to properly work for cross compiling. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-13ACPI implementation for i945, ICH7, Kontron 986LCD-MStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3999 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-11This patch contains some significant updates to the i82801gx component and willStefan Reinauer
be required for a series of later patches. Roughly it contains: * fixed SMBus driver (was not compiled in before) * fixed S-ATA/P-ATA combination * Added warnings to drivers being called with a NULL dev->chip_info * Set subsystem ids for those boards that have none specified in Options.lb * Fix license headers. The code was originally released under GPL v2 but some files sneaked in with a v2 or later header. * some attempts to fix azalia/Intel HDA.. not working yet * clean up and fix pci bridge handling code * Add Config based GPI handling to LPC driver * Add HPET enable function * Enable clock gating where appropriate * first attempt at USB debug console support (not working yet) * Add required options to kontron board * many other minor changes Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-10This patch adds common elements for ck804-based boards.Myles Watson
changes by file: src/northbridge/amd/amdk8/northbridge.c: Add high tables code ala Stefan's code for the i945. src/southbridge/nvidia/ck804/ck804_lpc.c: Enable High Precision Event Timers. Add pm_base for ACPI. src/southbridge/nvidia/ck804/ck804_fadt.c: Since fadt is only dependent on the Southbridge, add it here. src/southbridge/nvidia/ck804/Config.lb: Compile in ck804_fadt.c Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3988 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-06* fix a minor power state issue in the ich7 smm handlerStefan Reinauer
* move mainboard dependent code into a mainboard SMI handler. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-06use include file for i8259 where appropriate (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3980 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-04I just went on a bugfix frenzy and fixed all printk format warningsCarl-Daniel Hailfinger
triggered by the AMD 690/SB600 targets. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3970 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-28coreboot-v2: drop this ugly historic union name in v2 that was dropped in v3Stefan Reinauer
a long time ago. This will make it easier to port v2 boards forward to v3 at some point (and other things) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3964 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-15- Fix up amd pistachio and dbm690t.Stefan Reinauer
- make uma_memory_base and uma_memory_size uint64_t as they may be 64bit BARs on some platforms. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-12This patch converts __FUNCTION__ to __func__, since __func__ is standard.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-09Remove some warnings, mainly from format strings which didn't match theMyles Watson
arguments. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-05Use the correct device for switching on HDA.Dan Lykowski
Reorder HDA (HD Audio) init: The reordering was based on what order things happen in the BIOS Developers guide, RPR, and SATA driver. I fixed the order of the devices that didn't matter to clean up the change log. 1. Enable the Chip 2. Setup the SMBus registers 3. Setup the Device Registers 4. Look for Codec 5. Init Codec The codec init was changed to match the description in the RRG pg 235. Mem Reg: Base + 08h Bit 0. There were unneeded things happening. Added 1ms delay to match the BKDG while waiting for BAR+0xe to set its bits. Signed-off-by: Dan Lykowski <lykowdk@gmail.com> Tested on AMD DBM690T and AMD Pistachio by Maggie Li. Works. Tested on Asus M2A-VM by Carl-Daniel Hailfinger. Improves the situation, but some warnings remain. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-23Fix rs690 bug about GPPSB configuration.Maggie Li
Signed-off-by: Maggie Li <maggie.li@amd.com> Reviewed-by: Zheng Bao <Zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-20forgot to svn addStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3887 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-20Update Kontron boardStefan Reinauer
- use new features of the ich7 update - move rambase above 1M to avoid memory trashing through SMM relocation - enable superio HWM Update ICH7 driver - minor smi cosmetics (in progress) - add real ac97 driver - add real azalia driver - fix some interrupt issues - fix some sata issues - include Patrick's fix for _lpc.c Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-19First shot at factoring SMM code into generic parts and southbridge specificStefan Reinauer
parts. This should help to reduce the code duplication for Rudolf's K8/VIA SMM implementation... Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3870 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-15Adds a retry/faildown to SB600 SATA detection logic.Dan Lykowski
SATA port status kept returning 0x1: BAR5+po+28h 1h = Device presence detected but Phy communication not established This patch adds logic to force 1.5g if the drive fails to communicate at 3.0g. Signed-off-by: Dan Lykowski <lykowdk@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3864 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-29The SB600 RPR documentation does not mention what to do if SATA_BAR0+6Carl-Daniel Hailfinger
is no longer 0xA0 or 0xB0. It simply assumes that will never happen. My 500 GB Seagate Barracuda ST3500820AS triggers that corner case on the first init after poweron. The current code hangs forever with my drive. Fix this by rerunning the init sequence after SATA_BAR0+6 is no longer 0xA0 or 0xB0. Add support for SATA port 2-4 (Primary Slave, Secondary Master, Secondary Slave). If only the 2nd SATA port is connected and the hardware acts strangely (contrary to documentation), it will print the error message below and continue anyway. The official AMD asm code behaves the same way. SATA port 0 status = 0 No Primary Master SATA drive on Slot0 SATA port 1 status = 23 0x6=7f, 0x7=7f drive no longer selected after 0 ms, retrying init [8 repetitions] 0x6=7f, 0x7=7f drive no longer selected after 0 ms, retrying init Primary Slave device is not ready after 10 tries Activate and improve debug messages for SPEW log level. Fix some comments. New log messages look like this: PCI: 00:12.0 init sata_bar0=3020 sata_bar1=3060 sata_bar2=3030 sata_bar3=3070 sata_bar4=3000 sata_bar5=fc309000 SATA port 0 status = 23 0x6=a0, 0x7=80 drive detection not yet completed, waiting... 0x6=a0, 0x7=80 drive detection not yet completed, waiting... [... 281 repetitions ...] 0x6=0, 0x7=50 drive no longer selected after 2820 ms, retrying init drive detection done after 0 ms Primary Master device is ready after 2 tries SATA port 1 status = 23 drive detection done after 0 ms Primary Slave device is ready after 1 tries SATA port 2 status = 0 No Secondary Master SATA drive on Slot2 SATA port 3 status = 0 No Secondary Slave SATA drive on Slot3 With this patch, my Asus M2A-VM boots into Linux without problems. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-23Handle RS690 quirks for 1 GHz noncoherent HyperTransport.Carl-Daniel Hailfinger
The RS690 chipset has a problem where it will not work with 1 GHz HT speed unless NB_CFG_Q_F1000_800 bit 0 is set. Tested, works on my Asus M2A-VM with an 1 GHz HT capable processor. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Bao, Zheng says: As a matter of fact, both 600Mhz and 1Ghz have their own specific setting. This patch has been tested on dbm690t which HT link works on 800Mhz. Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3839 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-23Fix implicit declarations of pci_read_config32 and pci_write_config32 inMaggie Li
the SB600 code. Signed-off-by: Maggie Li <Maggie.li@amd.com> Reviewed-by: Zheng bao <Zheng.bao@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3837 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-22Fix implicit udelay src/southbridge/nvidia/mcp55/mcp55_aza.cCarl-Daniel Hailfinger
Fix imlicit mdelay in src/southbridge/nvidia/mcp55/mcp55_nic.c Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3831 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-19Fix a LOT of implicit function declarations before they become errors.Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3822 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-18Fix implicit declaration in cn700/vt8237 codeCorey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3819 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-18This patch gets rid of all the implicit definition warnings for serengeti ↵Myles Watson
except get_nodes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3818 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-17Add 690G and 690(MT) internal graphics support.Zheng Bao
The device ID of 690G is 0x791E, while the ID of 690M and 690T is 0x791F This fixes booting on 690G. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-13Move mainboard specific changes to the coreboot memory table into theStefan Reinauer
mainboard specific code. (And add a hook to allow other mainboards do a similar thing if required) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3812 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-12Improve comments in early SB600 setup, handle non-LPC strapping andCarl-Daniel Hailfinger
document verification against the data sheets. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Maggie Li <maggie.li@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3811 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-04The patch changes the LDTSTOP length as well mostly default content of 0xec,Rudolf Marek
0xe4 and 0xe5 registers. I'm suspecting that the documentation may be wrong. Furthermore this fix for powernow may not work on CPUs hit by errata #181. Workaround should be implemented. The powernow may not work on pre-A2 revisions of VT8237S silicon, revision reg is unknown. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3795 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-01Add AMD rs690 VID DID reporting and some minor cleanups.Joe Bao
Signed-off-by: Joe Bao <zheng.bao@amd.com> Reviewed-by: Maggie Li <maggie.li@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3786 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-01Add AMD sb600 HPET setup and some minor cleanups.Joe Bao
Signed-off-by: Joe Bao <zheng.bao@amd.com> Reviewed-by: Maggie Li <maggie.li@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3785 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-14drop dead code in sb600 hdaStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3752 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-06Drop #defines for registers that are not existant on the ICH7.Uwe Hermann
Also, fix BIOS_CNTL, which is 0xdc on ICH7. Build-tested with kontron/986lcd-m. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3733 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-06The enable_hpet() code in intel/i82801gx will not work with theUwe Hermann
ICH7 southbridge (but it might work with ICH4/ICH5 or so). The ICH7 needs a different init code. Drop the non-working code for now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3732 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 03:58:35 +0000