summaryrefslogtreecommitdiff
path: root/src/southbridge/via
AgeCommit message (Collapse)Author
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
Change-Id: Ibb6606fe3996e377181872a4544600f2d58c5439 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1834 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Restore GNVS pointer in the resume pathDuncan Laurie
The SMM GNVS pointer is normally updated only when the ACPI tables are created, which does not happen in the resume path. In order to restore this pointer it needs to be available at resume time. The method used to locate it at creation time cannot be used again as that magic signature is overwritten with the address itself. So a new CBMEM ID is added to store the 32bit address so it can be found again easily. A new function is defined to save this pointer in CBMEM which needs to be called when the ACPI tables are created in each mainboard when write_acpi_tables() is called. The cpu_index variable had to be renamed due to a conflict when cpu/cpu.h is added for the smm_setup_structures() prototype. Change-Id: Ic764ff54525e12b617c1dd8d6a3e5c4f547c3e6b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1765 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-26Refactor driver structsPatrick Georgi
Our driver infrastructure became more flexible recently. Make use of it. These are the low hanging fruits (files with 5 device variants or more), but there are still lots of files with less potential for deduplication. Change-Id: If6b7be5046581f81485a511b150f99b029b95c3b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-21Don't use 64-bit constant 0x100000000 in linker scriptsNico Huber
The constant value 0x100000000 is used in linker scripts to calculate offsets from the end of 32-bit-addressed memory. There is nothing wrong with it, but 32-bit versions of ld do the calculation wrong. Change-Id: I4e27c6fd0c864b4d98f686588bf78c7aa48bcba8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1129 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-03-16VIA southbridge K8T890: Apply un-written naming rulesKyösti Mälkki
Use separate Kconfig option to select a driver directory for build and the specific type of southbridge to support. Change-Id: I9482d4ea0f0234b9b7ff38144e45022ab95cf3f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/685 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-18Add subsystem callbacks for VT8237x and VT890 family of chipsetsRudolf Marek
Change-Id: Id34615f0c229d276d72cdf984cf82ea8cc1a85bb Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/523 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18Unify ID_SECTION_OFFSET and mark it deprecatedPatrick Georgi
We used to put the id section at -0x10, with some boards overriding this to avoid collisions with romstraps. Hardcode the location at -0x80, at the possible expense of some space (0x70 bytes). This also makes the section easier to find in a binary image. At some point, CONFIG_ID_SECTION_OFFSET can be removed, so this option is moved to src/Kconfig.deprecated_options. Change-Id: I6ce2d6e94e57717939bda070bfe0c9df80ca2a89 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/549 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-02make GPIOs and misc configurable via devicetreeFlorian Zumbiehl
Change-Id: I9f70da76b5ea451f28a1ad9252c5d879fc4fe315 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/387 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02make INT[EFGH]# of vt8237 configurable as gpio via devicetreeFlorian Zumbiehl
Change-Id: I70202d81ddd1b0a00eddca4acabc621e5783e805 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/386 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02some black magic for initializing the old version of the k8t800Florian Zumbiehl
Change-Id: I1b5d23cee9f933aa090c9bd09890c7b335567e17 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/388 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-12-02implement usb2 termination and dpll delay setting for vt8237rFlorian Zumbiehl
Change-Id: I830c9a3daf5ac2e1ecd9a3e725a0b98f06509769 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/385 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-24vt8237: add support for setting the power state after loss of powerFlorian Zumbiehl
Change-Id: Ia7e3e77235530e952b2e84fdec8373b90fa59b7a Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/437 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-10compile code for CONFIG_SOUTHBRIDGE_VIA_K8T800_OLDFlorian Zumbiehl
make code dependent on CONFIG_SOUTHBRIDGE_VIA_K8T800 also be included for CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD Change-Id: I9f4624d08de2790fb513a88ed6207e28e7fbc733 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/374 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-10support for different location of HT registers in old version of K8T800Florian Zumbiehl
Change-Id: I2ad82b8059efb09f0593933cb6f53b51b653d494 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/373 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-08move function from header file to .c fileStefan Reinauer
http://review.coreboot.org/#change,378 introduced a function in k8x8xx.h move this function to ctrl.c and add a prototype to the header file instead. Change-Id: I0919ffb2030c53669b95f58b649d4a160f660923 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/429 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-07rename vt8237r_cfg() to k8x8xx_vt8237r_cfg() and make publicly accessibleFlorian Zumbiehl
Change-Id: I82d1ec5117a58aaa8cfd2a342b7172a2786f5680 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/379 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-07factor out common config for k8x8xx's dram_enable() and vt8237r_cfg()Florian Zumbiehl
Instead of writing to config registers in k8x8xx's dram_enable() and reading those back in vt8237r_cfg(), factor out generation of the values and reuse that in both places. Change-Id: I87a37398efe84b33e6678df74cd40b5abfe4f879 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/378 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-07add support for 1106:3188 (host controller of the old version of k8t800)Florian Zumbiehl
Change-Id: Id61678f03e1f7d964f7180a062dd6a689852d4ac Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/401 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-07in vt8237r_enable(), write function enables only to ISA bridge config spaceFlorian Zumbiehl
vt8237r_enable() so far wrote the function enable values to the same offset in the config space of every one of the vt8237's functions, even though the register is located in the ISA bridge only. Change-Id: I639586dc238132f5b8d2f320b794948718281b9c Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/368 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-04Revert "add support for 1106:3188 (host controller of the old version of ↵Patrick Georgi
k8t800)" due to dependency issues. This reverts commit 68c554550f59bd96caace96260ae2e30ed55ceb4 Change-Id: I353bd36b008f489a972c7c656d7ad07416f01387 Reviewed-on: http://review.coreboot.org/398 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-03add support for writing to SMBus with vt8237Florian Zumbiehl
Change-Id: I70fe072f8f3447d0be7b7ac64508a954fe47091d Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/372 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-03add support for 1106:3188 (host controller of the old version of k8t800)Florian Zumbiehl
Change-Id: I10135b37a6cef460be9bfbfd34746140310859a6 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/381 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
Change-Id: I2a3aaf10e453fa6cce8a993356f2a0587178209a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/276 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
LXBIOS and LXB-DSDT are not used in other parts of the tree. Make names consistent across the tree. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I91caeac09fd2401a36e53bd061d249b236a48e43 Reviewed-on: http://review.coreboot.org/224 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-30Improve VIA K8M890 HT settings. Use recommended settings for ROMSIP andRudolf Marek
for the transmit clock driving control. Unfortunately this is not enough to make the HT1000 work reliably, therefore blacklist this for now in CPU HT code. If ever anyone figure out what is wrong, it could be removed. The downgrading now makes the board work on HT800, which is certainly better than not at all with a HT1000 CPU. Change-Id: I949bfd9b0b48ee12bd0234c2fb1deaaa773bd235 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/68 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-07SMM: add defines for APM_CNT registerSven Schnelle
in the current code, the defines for the APM_CNT (0xb2) register are duplicated in almost every place where it is used. define those values in cpu/x86/smm.h, and only include this file. And while at it, fixup whitespace. Change-Id: Iae712aff53322acd51e89986c2abf4c794e25484 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/4 Tested-by: build bot (Jenkins)
2011-06-04vt8237r: Simplify bootblock init to work around nested if() romcc problemPeter Stuge
During the hackathon in Prague we discovered that romcc has a problem compiling the previous nested if() statements correctly. This patch makes the code a little simpler, and indeed works around the romcc issue. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6620 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21some ifdef --> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6535 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-20drop dead uart init code.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6523 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14drop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused CONFIG_ARCHStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-02Fixes licensing of src/southbridge/via/k8t890/k8x8xx.h to GPLv2+ from GPLv3.Alexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6426 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Fix build errors introduced in r6367Alexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Extended K8T890 driver to include the K8T800 and K8M800 northbridgesAlexandru Gagniuc
The K8T800 is almost identical to the K8T800Pro, also added to this patch. The K8T800_OLD is also defined, which is an older version of the K8T800, but which has no driver and early HT code yet. Also extended the K8M890 VGA driver to work for the K8M800 (not tested). According to the datasheet, the K8T890 and K8T800 are similar enough to be able to use the same initialization code. At least for the K8T800, this is sufficient to have a working HT link with the CPU, and to initialise the V-Link to the southbridge. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18SMM on AMD K8 Part 2/2Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6202 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18SMM for AMD K8 Part 1/2Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6201 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13Following patch adds support for suspend/resume functions. I had to change ↵Rudolf Marek
the get_cbmem_toc because macro magic did not work well. The writes to NVRAM are not used in asrock board (k8 pre rev f) but they should work when used with am2 boards. In fact maybe the suspend will work on mahogany or others ;) - with some simple patch which follows for asrock. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-24With low serial console loglevels a pcie graphics card is notTobias Diedrich
initialized properly because the pcie link takes some time to come up. I set the timeout rather arbitrary to 100ms, this is what a BIOS_ERR and higher only boot looks like on my system (with pcie printks set to BIOS_ERR so they show up): |Device error |Device error |PCI: 00:02.0 PCIe link up after 35800 us |PCI: 00:03.0 PCIe link up after 12900 us |PCI: 00:03.1 PCIe link timeout |PCI: 00:03.2 PCIe link up after 32000 us |APIC: 00 missing read_resources |I2C: 01:50 missing read_resources |I2C: 01:51 missing read_resources |I2C: 01:52 missing read_resources |I2C: 01:53 missing read_resources |Start bios (version pre-0.6.2-20101025_023503-nukunuku) Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6121 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-221) wraps the s3 parts of chipset code/memory init code with if ↵Rudolf Marek
CONFIG_HAVE_ACPI_RESUME == 1 getting rid of ugly define in romstage.c 2) the patch implements get_cbmem_toc in chipset specific way if defined. On Intel targets it should be unchanged. On K8T890 the the cbmem_toc is read from NVRAM. Why you ask? Because we cannot do it as on intel, because the framebuffer might be there making it hard to look for it in memory (and remember we need it so early that everying is uncached) 3) The patch removes hardcoded limits for suspend/resume save area (it was 1MB) on intel. Now it computes right numbers itself. 4) it impelements saving the memory during CAR to reserved range in sane way. First the sysinfo area (CAR data) is copied, then the rest after car is disabled (cached copy is used). I changed bit also the the copy of CAR area is now done uncached for target which I feel is more right. I think I did not change the Intel suspend/resume behaviour but best would be if someone can test it. Please note this patch was unfinished on my drive since ages and it would be very nice to get it in to prevent bit rotten it again. Now I feel it is done good way and should not break anything. I did a test with abuild and it seems fine. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6117 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Printing coreboot debug messages on VGA console is pretty much useless, sinceStefan Reinauer
initializing VGA happens pretty much as the last thing before starting the payload. Hence, drop VGA console support, as we did in coreboot v3. - Drop VGA and BTEXT console support. Console is meant to be debugging only, and by the time graphics comes up 99% of the risky stuff has already happened. Note: This patch does not remove hardware init but only the actual output functionality. The ragexl driver needs some extra love, but that's for another day - factor out die() and post() - drop some leftover RAMBASE < 0x100000 checks. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: QingPei Wang<wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17Linux also needs the MMCONF area to be reserved either in E820 orTobias Diedrich
as an ACPI motherboard resource or it will not enable MMCONFIG and the extended pcie configuration area will be unaccessible: This patch adds the IORESOURCE_RESERVE flag to the APIC and MMCONF resource flags to do this. I also added a new resource for the mapped bios rom area just below 4GB. I'm not sure if the choice for the index parameter of new_resource() is correct though. Note that the bios rom decode is enabled in src/southbridge/via/vt8237r/vt8237r_early_smbus.c for the whole 4MB area (even though the comment says 1MB). Ruik: I extended the flash range to 16MB (This is what VT8237S can decode) Remove the MMCONFIG region reserve in the mainboard file (this patch makes it obsolete) Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6083 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17The only southbridge having a pirq_assign_irqs function (needed forTobias Diedrich
CONFIG_PIRQ_ROUTE) so far is the amd cs5530. Add one for vt8237 too. Setting up the pci routing is important in case you want to boot DOS, OSes that don't support ACPI or MP tables and ROMs for add-in storage controllers may depend on this too. TODO: Fix the 4 routing links limitation in src/arch/i386/boot/pirq_routing.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6081 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Add a target for the ASUS A8V-E Deluxe (trivial).Uwe Hermann
For now this is a plain copy of the ASUS A8V-E SE target, I reported that most of the code also works (sort of) for the ASUS A8V-E Deluxe a long while ago, see http://www.coreboot.org/pipermail/coreboot/2008-March/031866.html http://www.coreboot.org/ASUS_A8V-E_Deluxe There will be a bunch of changes necessary though (devicetree.cb, mptable.c, ACPI, etc) which do not apply to the A8V-E SE, so we need an extra target. Also: Increase ID_SECTION_OFFSET on the VIA K8T890/K8M890 southbridge, as otherwise there will be build errors if the MAINBOARD_PART_NUMBER string gets too long (as is the case for "A8V-E Deluxe"). The error is: ld: section .id loaded at [00000000ffffffd2,00000000ffffffef] overlaps section .romstrap loaded at [00000000ffffff80,00000000ffffffd3] (both with stock Debian gcc and with xgcc) Increase ID_SECTION_OFFSET (default 0x10) to 0x80 as other southbridges do. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6072 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Move cable detect logic to a weak function in vt8237r_ide.c and addTobias Diedrich
an override function in m2v/mainboard.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6069 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Currently the Tobias Diedrich
cablesel |= (sb->ide0_80pin_cable << 28) | (sb->ide0_80pin_cable << 20) | (sb->ide1_80pin_cable << 12) | (sb->ide1_80pin_cable << 4); in vt8237r_ide.c ends up doing cablesel |= 0xfffffff0; (with both bits set to 1) which is probably not the intended result. ;) After a short discussion on irc the consensus was to change the bitfields to u8 as it's probably not worth it using bitfields here. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6068 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-11Add VT8237A id to src/southbridge/via/vt8237r/bootblock.cTobias Diedrich
I missed this one since it was working anyway, since "The LPC BIOS ROM is always accessed when ISA addresses FFF80000-FFFFFFFF and 000F0000-000FFFFF are decoded" (VT8237R datasheet) And the rom I use for testing is smaller than this 512KB default range. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6062 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-11Add pci id and ops for VT8237A SATA controllerTobias Diedrich
Needed to change class from raid to ide so seabios can boot from it. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6061 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Depends on the "Introduce get_vt8237_lpc() function" andTobias Diedrich
"Use get_vt8237_lpc() in vt8237_sb_enable_fid_vid()" patches. This adds VT8237A specific VLINK/LPC init in vt8237r_early_smbus.c I ran some tests and apparently both the | /* So the chip knows we are on AMD. */ | pci_write_config8(devctl, 0x7c, 0x7f); and | /* | * Allow SLP# signal to assert LDTSTOP_L. | * Will work for C3 and for FID/VID change. | */ | outb(0x1, VT8237R_ACPI_IO_BASE + 0x11); in vt8237r_early_smbus.c are needed on VT8237A, otherwise I get a (non-fatal) fid/vid change error on boot. While vt8237a_vlink_init() in vt8237_ctrl.c is a modified vt8237r_vlink_init(), vt8237a_init() in vt8237r_lpc.c is a modified vt8237s_init(). Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6043 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07This adds the VT8237A LPC pci_locate_device call in vt8237r_early_smbus.cTobias Diedrich
Depends on the "Introduce get_vt8237_lpc() function" patch. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Use get_vt8237_lpc() in vt8237_sb_enable_fid_vid() too.Tobias Diedrich
I broke this out into a seperate part to keep the other half as straight-forward as possible. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6041 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Instead of duplicating the pci_locate_device calls multiple times,Tobias Diedrich
add a get_vt8237_lpc() function. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6040 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Add pointer to public PCIe bridge documentation onTobias Diedrich
http://linux.via.com.tw/ as VX800 seems to be compatible. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07This adds VT8237A specific VLINK/LPC init functions in vt8237_ctrl.cTobias Diedrich
and vt8237r_lpc.c. While vt8237a_vlink_init() in vt8237_ctrl.c is a modified vt8237r_vlink_init(), vt8237a_init() in vt8237r_lpc.c is a modified vt8237s_init(). Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6038 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07This adds the VT8237A LPC device id and the pci_driver struct inTobias Diedrich
vt8237r_lpc.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-04Add a rom_enable() function to via/vt8231 and call it from via/epia/romstage.cUwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6018 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-02Need to clear downstream read cycle retry bit, or the bus scan willTobias Diedrich
hang. Also need to set lane config to 0x00 for autonegotiation. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6013 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-02This adds pci device ids and pci_driver structs for the K8T890 CFTobias Diedrich
variant. It also adds additional dev_find_device calls in k8t890_ctrl.c for subfunctions 3 and 7. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6012 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-08Code must not access the smbus registers before the RTC power well isKevin O'Connor
ready (PSON gating). Some boards boot faster than this power well stabilization, and thus see bad data when accessing the smbus registers. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5788 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board /Jens Rottmann
chipset support it. But this involves a long list of 'depends', which you have to remember updating manually. Converted this into HAVE_... properties, which will be inherited automatically if someone copies a chipset to create a new one. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-01Clarify a comment on an old hack, remove the call to early_mtrr_initCorey Osgood
that causes CAR to hang, provide more debugging output wrt memory size, and correct the numbering on the ram init sequence. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5677 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-01Update my old, no longer active email addressesCorey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5674 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-08Fix all warnings in the tree Stefan Reinauer
(does not fix the cmos.layout race yet) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5660 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-17Always enable parent resources before child resources.Myles Watson
Always initialize parents before children. Move s2881 code into a driver. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-09The interrupt controller lives at I/O 0x4d0/0x4d1.Stefan Reinauer
However on these platforms we were causing a resource conflict by letting the resource allocator start allocations at 0x400. Change the constraints to start at 0x1000 so we avoid allocating over LPT ports (0x778-0x77f), PCI (0xcf8-0xcff) and some other fixed resources that might live down there (smbus base, acpi base,...) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-25Fix the the build of r5494 on Asus A8V-E SE. The K8M890 and K8T890Rudolf Marek
were not treated separately until now. Fix it. Hope self ack is OK, compiled tested locally. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5497 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-25Following patch changes the K8M890 VGA handling. It reverts the framebuffer sizeRudolf Marek
to option based (similar what Uwe did) and also it uses GFXUMA to handle the high_tables_start offset from memory top. To satisfy the CMOS option users (Hi, libv! ;) I added also a possibility to do that through CMOS. Fixed printks to match the new style. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5494 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-23Attached patch adds support for tinybootblock on VT8237* to decode whole flashRudolf Marek
independent of strapping, making larger flashes work. We cannot walk anything else than PCI bus 0 because HT is not setup yet. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-22zero warnings days...Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5477 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-15zero warnings days...Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-14zero warning days. Move RAMTOP and RAMBASE together.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-14Remove few more warnings and some dead code.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5432 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-14geeesh! And this really compiles and even runs?Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5431 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-14zero warnings days. Down to under 600 different warnings Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-07no warnings dayStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-07clean up age old via epia target.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-07switch some ROMCC boards back to ROMCC.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-07"no warnings day"Stefan Reinauer
last round for today. still warnings - help appreciated. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-06No warnings day, next round.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-03device_t wants device/device.hStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-03remove more warnings.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
Only some assembler files still have \r\n ... Can we move that part to C completely? Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-05This patch is from 2009-10-20Uwe Hermann
Convert all DEBUG_SMBUS, DEBUG_SMI, and DEBUG_RAM_SETUP custom and local #defines into globally configurable kconfig options (and Options.lb options for as long as newconfig still exists) which can be enabled by the user in the "Debugging" menu. The respective menu items only appear if a board is selected where the chipset code actually provides such additional DEBUG output. All three variables default to 0 / off for now. Also, drop a small chunk of dead/useless code in the src/northbridge/via/cn700/raminit.c file, which would otherwise break compilation. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reworked to still apply to trunk, added X86EMU_DEBUG (and make the x86emu/yabel code only work printf instead of a redefined version of printk and Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-23Remove nonsensical wrapper for function inStefan Reinauer
PS/2 keyboard API. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5152 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-15Various license header consistency fixes (trivial).Uwe Hermann
- Consistently use the same wording and formatting for all license headers. - Remove useless whitespace, add missing whitespace, fix indentation. - Add missing "This file is part of the coreboot project." where needed. - Change "(C) Copyright John Doe" to "Copyright (C) John Doe" for consistency. - Add some missing "(C)" strings and copyright years where needed. - Move random comments and file descriptions out of the license header. - Drop incorrect file descriptions completely (e.g. lpc47m10x/Makefile.inc). There should be no changes in _content_ of the license headers, if you spot such changes that's a bug, please report! Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07newconfig is no more.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1