summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
AgeCommit message (Collapse)Author
2017-01-03sb/intel/common/gpio: Support ICH9M and priorPatrick Rudolph
Write gpio level twice to make sure the level is set after pins have been configred as GPIO and to minimize glitches on newer hardware. Required to set correct GPIO layout on T500. Tested on T500. Change-Id: I691e672c7cb52ca51a80fd29657ada7488db0d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18012 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/i82801ix: Add HAVE_INTEL_FIRMWAREKyösti Mälkki
Select this to provide menu in menuconfig to add flash descriptor file. ME or GbE firmwares themselves are not required, but integrated NIC MAC and SPI configuration fields are still useful. Change-Id: I14b86e2f38ec39924d2cbf0932d82f66ed356a03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17805 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11intel/i945: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Scratchpad register was read too late in ramstage so acpi_is_wakeup_s3() did not evaluate correctly. This fixes low memory corruption at 0x1000-0x102c and the lack of coreboot tables (util/cbmem not working) after S3 resume. This also fixes console log from reporting early in ramstage "Normal boot" while on "S3 resume" path. Change-Id: I2922a15a90d2f8272c3482579bdd96f8f33e9705 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17675 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel/gm45: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Also fixes console log from reporting early in ramstage "Normal boot" while on S3 resume path. Change-Id: I4e2eabc59ff87b7ed40cfc9885bbe0256fe4a695 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11x86 SMM: Fix use with RELOCATABLE_RAMSTAGEKyösti Mälkki
The value for _size was not evaluated correctly if ramstage is relocated, make the calculation runtime. While touching it, move symbol declarations to header file. Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-10intel 82801dx/gx/ix: Commit SMM relocation code to DRAMKyösti Mälkki
Make sure relocation code reaches DRAM before issuing any SMIs. Snooping and cache coherency may have undefined behaviour as CPUs do not have uniform MTRR layout yet. Change-Id: I47a7d684e05ff8c1c2f1f6a5bf8c0bbc561d9eac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17712 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-08sb/intel/bd82x6x: Add TCO_Lock in finalize stepDennis Wassenberg
CHIPSEC found that the TCO_Lock was not set. This is used to prevent changing the TCO_EN bit. Change-Id: I42364dbef2511e656662566cf94591e76c6847ed Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Reviewed-on: https://review.coreboot.org/17351 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Define read-modify-write routines globallyKyösti Mälkki
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17690 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. I liked the style of code in pci_mmio_cfg.h more, and used those to replace the ones in io.h. Change-Id: Ib5e6a451866c95d1edb9060c7f94070830b90e92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17689 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17545 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17529 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06spi_flash: Make a deep copy of spi_slave structureFurquan Shaikh
Commit 36b81af (spi: Pass pointer to spi_slave structure in spi_setup_slave) changes the way spi_setup_slave handles the spi_slave structure. Instead of expecting spi controller drivers to maintain spi_slave structure in CAR_GLOBAL/data section, caller is expected to manage the spi_slave structure. This requires that spi_flash drivers maintain spi_slave structure and flash probe function needs to make a copy of the passed in spi_slave structure. This change fixes the regression on Lenovo X230 and other mainboards. Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17728 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-04spi_flash: Move spi flash opcodes to spi_flash.hFurquan Shaikh
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I3b6656923bb312de470da43a23f66f350e1cebc7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17680 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30sb/intel/lynxpoint: add missing I2C ACPI SSCN/FMCN methodsPrabal Saha
The SSCN and FMCN methods provide the optimal HCNT/LCNT timing values to the driver, and are necessary when using I2C devices (eg, trackpad and touchscreen) in ACPI (vs PCI) mode. Add these methods using the timing values from Broadwell, which work for Haswell/Lynxpoint as well. TEST: build google/peppy with trackpad/touchscreen devices in ACPI mode, observe proper operation under Windows [8.1/10] and Linux [Mint 18] Change-Id: I25f07ac474b041358315530e5f391bb33d9c4d04 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Prabal Saha <coolstarorganization@gmail.com>
2016-11-28sb/intel/i3100/lpc.c: Use tab for indentsElyes HAOUAS
Change-Id: I37d0b1ad84a95342015659d319ac4ce20e5717be Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17584 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-22spi: Get rid of flash_programmer_probe in spi_slave structureFurquan Shaikh
flash_programmer_probe is a property of the spi flash driver and does not belong in the spi_slave structure. Thus, make spi_flash_programmer_probe a callback from the spi_flash_probe function. Logic still remains the same as before (order matters): 1. Try spi_flash_programmer_probe without force option 2. Try generic flash probing 3. Try spi_flash_programmer_probe with force option If none of the above steps work, fail probing. Flash controller is expected to honor force option to decide whether to perform specialized probing or to defer to generic probing. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21intel/i82801gx: Reorder spaces in outputPaul Menzel
Currently, the coreboot log of a Lenovo X60, not having any IDE devices connected, there is a trailing whitespace in the output. […] PCI: 00:1f.1 init ... i82801gx_ide: initializing... PCI: 00:1f.1 init finished in 11 usecs […] Reorder the whitespaces, so they are added when needed. Change-Id: I640e514c89fe0246a847d1fd088def1c88e864f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/11870 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-18sb/lynxpoint: use hda_verb.c from VARIANT_DIR if applicableMatt DeVillier
Change-Id: Ie2d0cf573876694fe87edf2f6915a5cc26238940 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-09southbridge/intel/i82801dx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801dx. Change-Id: I32888930d3742432a73dfc0a32c6586186e6757c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17297 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08southbridge/intel: Set chipset in ifdtool invocationsAndrey Petrov
Since IFD format is floating, ifdtool needs to be parameterized with a chipset it is dealing with. Add -p <chipset> argument to ifdtool invocations if chipset provides it. Change-Id: I4fd1783b5d994617912aedcf17adc2a98c97227b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17258 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07src/southbridge: Remove whitespace after sizeofElyes HAOUAS
Change-Id: Ic3b599d49a4c03ad8035c558b975f31cb91d253b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16862 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/intel/ibexpeak: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/ibexpeak. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Ic569aada9301b37e73196872584e191d553acd86 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16408 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/intel/i82801gx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801gx. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Ia257318a7068b54739f319bfbba35f2a07826940 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/intel/i82801ix: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801ix. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Ibf20e6c08994b09d2a2e68a1a1d38a7a477493aa Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16403 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-10southbridge/intel/i82801dx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801dx. Change-Id: Ic08a23f672f8b5e40b837d49a9475d52c728a306 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16485 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-10southbridge/intel/i82801ax: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801ax. Change-Id: I46f0cc92e1034f045988b42df7246f5d0c8d24fc Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16484 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-10southbridge/intel/i82371eb: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82371eb. Change-Id: Ie15a656c817a2ffe0f44ee3a89659d138a1bf212 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16483 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-10southbridge/intel/i3100: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i3100. Change-Id: Ic9616d5135cfb7206e086e51aaf82eb66540c4bb Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16482 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-10southbridge/intel/fsp_rangeley: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/fsp_rangeley. Change-Id: I6665f85c74eb3e37d78f6eecbec977dc21a5ad12 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16481 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-07intel/i82801gx 82801ix: Remove OpRegion of SMBus hostKyösti Mälkki
Defining this OpRegion for SMBus controller prevents linux kernel driver i2c-i801 from registering SMBus under sysfs, with following error in dmesg: ACPI Warning: SystemIO range .. conflicts with OpRegion .. (\_SB.PCI0.SBUS.SMBI) Solution taken from intel/bd82x6x. Worth noting we do not define ENABLE_SMBUS_METHODS anywhere currently. Removed remaining reference to HSTS from GETAC P470. Change-Id: I7c13d344b0343387681b46019cc5061b1435b46b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16266 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-04southbridge/intel/bd82x6x: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/bd82x6x. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: I7166bfab7904f80b745855d3bbcfb910cbc89f56 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16407 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31src/southbridge: Code formatingElyes HAOUAS
Change-Id: Icfc35b73bacb60b1f21e71e70ad4418ec3e644f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16291 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-28src/southbridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I43b9b86fd51dbdc50108026099c60238f3012cbe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16290 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-23src/southbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I42cc5b8736e73728c5deec6349e8d2a814e19e83 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16281 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Omar Pakker
2016-08-19bd82x6x/pch: move global variables to static variables in functionsFelix Held
Change-Id: I9e5795f9d601e5d2e7331715e5cd3848389cd594 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/16213 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-02intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & TianoPrabal Saha
Without this patch, eDP output is non-functional pre-graphics driver regardless of payload (SeaBIOS, Tianocore) or video init method (VBIOS, GOP driver) and once the standard Windows Intel HD graphics driver is loaded. Test: Boot Windows on peppy and auron_paine, install Intel HD Graphics driver, observe functional eDP output with full video acceleration. Debugging method: adjust location of call to run VBIOS within coreboot, observed that eDP output functional if the VBIOS is run before the power optimizer lines, broken if run afterwards. Change-Id: I6d8252e3de396887c84533e355f41693b9ea7514 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/15261 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31src/southbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I01413b9f8b77ecdcb781340f04c2fe9e24810264 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15941 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-21timestamp: Drop duplicate TS_END_ROMSTAGE entriesKyösti Mälkki
This entry gets added in run_ramstage(). Change-Id: I18cda4ead3614c6d07c3269cbee53e6def6408c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15755 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-15southbridge/intel/fsp_bd82x6x: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I884da90d24bc41e566a290f4135166d9e0cdf474 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15682 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/fsp_i89xx: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: Ibf2bc3ae89cb5a013cb1ccc439c906b00bf78d66 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15681 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/fsp_rangeley: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: Ia113672fa3cb740cb193c23fd06181d9ce895ac3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/i82801gx: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I08fb52ca13a4355d95fe31516c43de18d40de140 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15679 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/i82801dx: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I29918fe70b5e511785ed920d8953de3281694be2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/ibexpeak: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I65270ddcb612f9c63d7dbb2409e4395f96e10a51 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15677 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/lynxpoint: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I03051c1c1df3e64abeedd6370a440111ade59742 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15676 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15southbridge/intel/bd82x6x: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: Ie709e5d232c474b41f2ea73d3785a7975d6604ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15675 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-06PCI: Use PCI_DEVFN macro instead of DEV_FUNCWerner Zeh
There are several different macros available to convert a PCI device and function to a single 8 bit value. One is PCI_DEVFN and is defined in device/pci_def.h. The other is DEV_FUNC and is defined in several intel fsp based chipset implementations. In fsp_broadwell_de DEV_FUNC is even used without being defined at all. This patch unifies the situation so that only PCI_DEVFN is used. Change-Id: Ia1c6d7f3683badc66d15053846936d88aa836632 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15546 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-29intel romstage: Use run_ramstage()Kyösti Mälkki
Change-Id: I22a33e6027a4e807f7157a0dfafbd6377bc1285d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15461 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01drivers/lenovo: Add hybrid graphics driverPatrick Rudolph
Add a universal hybrid graphics driver compatible with all supported lenovo devices. Hybrid graphics allows to connect the display panel to either of one GPUs. As there are only two GPUs one GPIO needs to be toggled. In case the discrete GPU is activated the panel is routed to it. On deactivation the panel is routed to the integrated GPU. On lenovo laptops the dGPU is always connected to PEG10 and it is save to disable the PEG slot on dGPU deactivation. Use common gpio.c for southbridge I82801IX. Tested on Lenovo T520 using Nvidia NVS 5200m. Removed Lenovo T430s from the list of supported devices, as the T430s only supports "muxless Optimus". Depends on change id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 I8bd981c4696c174152cf41caefa6c083650d283a Iaf0c2f941f2625a5547f9cba79da1b173da6f295 I994114734fa931926c34ed04305cddfbeb429b62 Change-Id: I9b80b31a7749bdf893ed3b772a6505c9f29a56d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12896 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-05-17intel/sch: Merge northbridge and southbridge in src/socStefan Reinauer
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-04-22intel/i82801ax: Fix IDE setup console logPatrick Georgi
Fixes two issues: 1. In (the unlikely) case that dev->chip_info is NULL, the output was depending on an unknown value near the start of the address space. 2. Output for the secondary interface actually printed the primary interface's configuration. Change-Id: Id0f499a85e6e2410b4efd63baf7fffb2fcaa3103 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14361 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-23southbridge/intel/ibexpeak: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Remove the now unused bd82x6x/gpio.c. Needs test on real hardware ! Change-Id: Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13616 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder, except for INTEL_LYNXPOINT_LP, which has it's own gpio code. Needs test on real hardware ! Change-Id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13615 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18southbridge/intel/bd82x6x/acpi: Fix IRQ warningsPatrick Rudolph
The PCIe slot uses Message Signaled Interrupts (MSI) as the IGD does and doesn't use hardware INT lines. Adding the IRQ entry for PEG slot fixes a warning showing up in GNU/Linux dmesg. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I5ac40e7bea9a659c6c89262aac4552bc8177a9e5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13612 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-16southbridge/intel/common: Add common gpio.cPatrick Rudolph
Add a common southbridge gpio code to reduce existing duplicated code. By adding it to ram-stage, GPIOs can be changed any time, without the need of direct register access. The files are based on bd82x6x and lynxpoint gpio.c. Change-Id: Iaf0c2f941f2625a5547f9cba79da1b173da6f295 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-20sb/intel/i82801gx: Clean up sata.cDamien Zammit
This tidies up the setting of the PCS register. An assumption is made that bit 4 of this register is read-only, which according to the ICH7 datasheet, it is. Change-Id: Ia9b7d38a87e26236f6ebc951c169cae12b13139f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13015 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-15sb/intel/i82801gx: Fix sata AHCI for desktop NM10/ICH7Damien Zammit
Tested on Intel D510MO Before this patch, I was unable to get the SATA controller into AHCI mode. That is, I could never see PCI ID 8086:27c1 appearing on the bus. With sata_ahci set, controller now goes into AHCI mode and works. 8086:27c1 Tested on X60 with AHCI enabled 8086:27c5 (AHCI mode for mobile ich7) No regressions detected. Change-Id: I4a3eabb5773106a0825fa2f30ee400fbfe636c7f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12923 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-03sb/intel/bd82x6x: Add missing PCIIDs for variants .Vladimir Serbinenko
Change-Id: I917b8167a028aa9412b0cc6dedf8f09a1d1fae7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/12820 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-12-26ACPI: Add hack to avoid IASL warning when reading back registersMartin Roth
Upcoming versions of IASL give a warning about unused methods. This adds an operation after the read to use the local variable and avoid the warning. The warning can be completely disabled on the command line, but as it can find real issues, my preference is to not do that. Fixes warnings: dsdt.aml 640: Store (CTMP, Local0) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: If55bb8e03abb8861e1f2f08a8bcb1be8c9783afe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-10ACPI: Fix IASL Warning about unused method for _TZ checksMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 640: If (CondRefOf (^GBUF, Local0)) { Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: Iddf46a4faab19019882847917397eee0614302b9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12695 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-08intel/common/firmware: Add option to configure SPI for EM100Martin Roth
Add a Kconfig option to set the firmware descriptor to allow EM100 use. Change-Id: If5d7cd6ad671f0328ee5be0b5e660dbc837fcac3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-12-06intel/fsp_rangeley: change non-existent config options to #definesMartin Roth
Kconfig symbols CONFIG_ACPI_INCLUDE_PMIO and CONFIG_ACPI_INCLUDE_GPIO were never added to the coreboot codebase when the Rangeley code was brought in from Sage. These symbols disabled ACPI code that was unused because it caused dmesg warnings due to conflicts with drivers trying to claim the same addresses as the ACPI code. Because it could be used on some other platforms, it was left in instead of being completely removed. - Change the Kconfig symbol names to simple #defines in the mainboard code. - Add the #defines along with comments to the reference platform. - Hook everything together in dsdt.asl - Update new mainboard littleplains the same way. Change-Id: I1f62157c6e447ea9b7207699572930e4711fc3e0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12552 Reviewed-by: David Guckian <david.guckian@intel.com> Tested-by: build bot (Jenkins)
2015-12-06southbridge/intel/fspi89xx: Don't include common/firmware makefileMartin Roth
The folder southbridge/intel/common/firmware is already being included so does not need to be added a second time here. Change-Id: I60d795a60c772547278a5a5e0c9a023a93f90417 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12636 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24southbridge/intel: Use i82801gx code for NM10Damien Zammit
It works as an ICH7 on Intel D510MO mainboard Change-Id: Ib8c76c001dffee8f93e3d6aa3156d4413b2e842a Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/12431 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-19x86: Add Kconfig to disable early bootblock postcodesMartin Roth
The Intel cave creek chipset needs to have port 80 routing configured before any post codes can be sent to port 80h. Sending post codes out before the routing is done will hang the system. This patch allows us to disable the first couple of post codes that go out before the routing can be configured. The Kconfig symbol is selected by the cave creek chipset (fsp_i89xx). Change-Id: I9bf41669ec32744f87a1ed2de011d31c72ea38da Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12422 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: York Yang <york.yang@intel.com>
2015-11-10southbridge/intel: Add FSP based i89xx southbridge supportMarc Jones
The Intel i89xx is a communications chipset that pairs with Sandy(Ivy)bridge processors. It has a lot in common with the bd82x6x chipset, but fewer devices and options. Change-Id: I11bcd1edc80f72a1b2521def9be0d1bde5789a79 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12166 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7108 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-04sb/intel/bd82x6x: Assign unique bus/dev/fn for I/O APIC + HPETsNico Huber
Assign unique bus/dev/fn values for the I/O APIC and each HPET. The values are taken from an example DMAR table. They are used as source-id for MSI requests and as completer-id for reads from the device' MMIO space [1, 2]. The former is usefull for source-id verfication during interrupt remapping. [1] Intel 6 Series Chipset and Intel C200 Series Chipset Datasheet Document-Number: 324645 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) Datasheet Document-Number: 326776 Change-Id: Ib46f8cfb7d966dd1cf2b026f671bc45ffcc43d25 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12193 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop southbridge intel/esb6300Stefan Reinauer
All mainboards using this southbridge have been removed from the tree already. Change-Id: I4398ef1e270bd0f36c5dd1c6ec3bfec6c2c091e6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12238 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Drop southbridge intel/i82801cxStefan Reinauer
All boards using this southbridge have been removed from the tree already. Change-Id: I08269931d845d1f57b34174238bcce245ad77894 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-22Revert "Remove sandybridge and ivybridge FSP code path"Martin Roth
Please don't remove chipsets and mainboards without discussion and input from the owners. Someone was asking about cougar canyon 2 just a couple of weeks ago - there's obviously still interest. This reverts commit fb50124d22014742b6990a95df87a7a828e891b6. Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/12128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-16intel/southbridge/bd82x6x: Add option to set SPI VSCC registersNico Huber
These are needed for the hardware-sequencing function of the PCH SPI interface. Values are specific to the flash chip used on a board. Change-Id: Id06766b4bac2686406bc09b8afa02f311f40dee7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11798 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-10-14Revert "Remove FSP Rangeley SOC and mohonpeak board support"Martin Roth
This chip is still being used and should not have been deleted. It's a current intel chip, and doesn't even require an ME binary. This reverts commit 959478a763c16688d43752adbae2c76e7764da45. Change-Id: I78594871f87af6e882a245077b59727e15f8021a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11860 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-03Remove FSP Rangeley SOC and mohonpeak board supportAlexandru Gagniuc
mohonpeak is the reference board for Rangeley. I doubt anyone uses it or cares about it. We jokingly refer to it as "Moron Peak". It's code with no known users, so we shouldn't be hauling it around for the eventuality that someone might use it in the future. Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11790 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03Remove sandybridge and ivybridge FSP code pathAlexandru Gagniuc
We already have two other code paths for this silicon. Maintaining the FSP path as well doesn't make much sense. There was only one board to use this code, and it's a reference board that I doubt anyone still owns or uses. Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11789 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03sandybridge ivybridge: Treat native init as first class citizenAlexandru Gagniuc
This is a sad story. We have three different code paths for sandybridge and ivybridge: proper native path, google MRC path, and, everyone's favorite: Intel FSP path. For the purpose of this patch, the FSP path lives in its own little world, and doesn't concern us. Since MRC was first, when native files and variables were added, they were suffixed with "_native" to separate them from the existing code. This can cause confusion, as the suffix might make the native files seem parasitical. This has been bothering me for many months. MRC should be the parasitical path, especially since we fully support native init, and it works more reliably, on a wider range of hardware. There have been a few board ports that never made it to coreboot.org because MRC would hang. gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so the effort was abandoned at first. Once the native path became available, the effort was restarted and the board is now supported. In honor of the hackers and pioneers who made the native code possible, rename things so that their effort is the first class citizen. Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11788 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>