summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
AgeCommit message (Expand)Author
2013-06-19intel/i82801gx: Store initial timestampNico Huber
2013-06-17Make intel blob locations configurablePatrick Georgi
2013-06-14lynxpoint: Fix PCI IDs for EHCIKyösti Mälkki
2013-06-13Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"Stefan Reinauer
2013-06-12Add support for Intel Ibex Peak (Mobile 5) southbridgeStefan Reinauer
2013-06-12usbdebug: Drop printk within console_init()Kyösti Mälkki
2013-06-12Fix i82801a/b/c/d IOAPICKyösti Mälkki
2013-06-12intel/*/smi.c: Output correct GPIO in ALT_GP_SMI_STS register dumpKonstantin Aladyshev
2013-06-11intel/bd82x6x/Makefile.inc: Revert duplicate addition of `usb_debug.c`Paul Menzel
2013-06-11Fix cycle error in intel southbridges to display GPI statusKonstantin Aladyshev
2013-06-06intel/bd82x6x: Add option to include ethernet firmwareNico Huber
2013-06-06intel/bd82x6x: fix building usb debug on SNB/IVBPatrick Georgi
2013-06-03Intel Lynx Point: LPC: Unify I/O APIC setupPaul Menzel
2013-06-03Intel BD82x6x: LPC: Unify I/O APIC setupPaul Menzel
2013-05-10Drop prototype guarding for romccStefan Reinauer
2013-05-07Intel 82801Gx: LPC: Unify I/O APIC setupPaul Menzel
2013-05-03Intel Lynx Point: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
2013-04-26Intel 82801gx: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
2013-04-16Intel Panther Point PCH: Use 2 << 24 to clarify that APIC ID is 2Vladimir Serbinenko
2013-04-03lynxpoint: Cosmetic cleanupStefan Reinauer
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
2013-04-01lynxpoint: Basic configuration of SerialIO devicesDuncan Laurie
2013-04-01lynxpoint: Fix LP clock gating setup for LPCDuncan Laurie
2013-04-01lynxpoint: fix enable_pm1() functionAaron Durbin
2013-04-01lynxpoint: split clearing and enabling of smmAaron Durbin
2013-04-01lynxpoint: Rework ACPI NVS to add new SerialIO variablesDuncan Laurie
2013-03-22Unify setting i82801e LPCKyösti Mälkki
2013-03-22Fix compilation of Intel LynxPoint based boardsStefan Reinauer
2013-03-22romstage: add support for vboot firmware selectionAaron Durbin
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
2013-03-21lynxpoint: Fix up handling for LynxPoint-LP chipsetsDuncan Laurie
2013-03-21lynxpoint: Change sata.c to get rid of #ifDuncan Laurie
2013-03-21lynxpoint: Fix ELOG logging of power management eventsDuncan Laurie
2013-03-21haswell/lynxpoint: Use new PCH/PM helper functionsDuncan Laurie
2013-03-21lynxpoint: Fix GPIO and PM base reservationsDuncan Laurie
2013-03-21lynxpoint: remove DEBUG_PERIODIC_SMISDuncan Laurie
2013-03-21lynxpoint: Add power management helper functionsDuncan Laurie
2013-03-21lynxpoint: Add helper functions for reading PM and GPIO baseDuncan Laurie
2013-03-21lynxpoint: Add function for checking for LP chipsetDuncan Laurie
2013-03-21lynxpoint: Enable EC IO ports 0x62/0x66Duncan Laurie
2013-03-21lynxpoint: update MBP give up routineAaron Durbin
2013-03-21LynxPoint: Move RCBA helper function to its own fileDuncan Laurie
2013-03-19lynxpoint: Add cbfs_load_payload() implementationAaron Durbin
2013-03-19bd82x6x: Fix compiling with USB debug port supportRonald G. Minnich
2013-03-18lynxpoint: Move a bit of generic RCBA into early_pchDuncan Laurie
2013-03-18haswell: Use SMM ModulesAaron Durbin
2013-03-17Intel HD Audio: clean up initialization codeStefan Reinauer
2013-03-17haswell platforms: restructure romstage mainAaron Durbin
2013-03-17bd82x6x: Add config option to force SATA link to different speeds.Shawn Nematbakhsh
2013-03-17Pantherpoint: Add XHCI device initDuncan Laurie
2013-03-17bd82x6x: don't use absolute symbolsAaron Durbin
2013-03-17Add bd82x6x XHCI(USB3) S3/S4 workaroundMarc Jones
2013-03-17Add bd82x6x PCH functions to SMMMarc Jones
2013-03-17lynxpoint: Add support for disabling ULT devicesDuncan Laurie
2013-03-14lynxpoint: lpc resource reservationsAaron Durbin
2013-03-14haswell: more ULT/LP support and minor tweaksDuncan Laurie
2013-03-14lynxpoint: Update device IDs and clock gating setupDuncan Laurie
2013-03-14lynxpoint: Add new GPIO interface for Lynxpoint-LPDuncan Laurie
2013-03-14lynxpoint: Add Kconfig entry for Low Power chipsetDuncan Laurie
2013-03-14lynxpoint: ME to BIOS Payload UpdatesAaron Durbin
2013-03-14lynx point: add new ME status informationAaron Durbin
2013-03-14haswell: remove GPIO60 memory reset gate on S3 transitionDuncan Laurie
2013-03-14haswell: remove explicit pcie config accessesAaron Durbin
2013-03-14lynxpoint: PMIR register renameAaron Durbin
2013-03-14lynxpoint: Management Engine UpdatesAaron Durbin
2013-03-14haswell: add PCI id supportAaron Durbin
2013-03-14lynxpoint: Update IOBP programming methodDuncan Laurie
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
2013-03-09Add Intel Panther Point USB3 initializationMarc Jones
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-28Use defines for some i82801ex/gx registersKyösti Mälkki
2013-02-27smm: Update rev 0x30101 SMM revision save stateAaron Durbin
2013-02-26Unify setting 82801a/b/c/d IOAPIC IDKyösti Mälkki
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
2013-02-11spi.h: Rename the spi.h to spi-generic.hZheng Bao
2012-11-27Drop driver-y from GM45/ICH9/RK9Stefan Reinauer
2012-11-27Get rid of drivers classPatrick Georgi
2012-11-27intel/i82801ix: new southbridge, ICH9Patrick Georgi
2012-11-16Drop Kconfig variable BOARD_HAS_HARD_RESETStefan Reinauer
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
2012-11-14SMM: Fix save state searching for GSMIDuncan Laurie
2012-11-14SMM: Pass the ACPI GNVS pointer via state save mapDuncan Laurie
2012-11-14SMM: Avoid use of global variables in SMI handlerDuncan Laurie
2012-11-14SMM: Extract function for finding save state nodeDuncan Laurie
2012-11-13Add Kconfig option to lock/unlock ME firmware during buildStefan Reinauer
2012-11-13SandyBridge/IvyBridge: Add IFD and ME firmware automaticallyStefan Reinauer
2012-11-12SPI: Add early romstage SPI driver using hardware sequencingDuncan Laurie
2012-11-12SPI: Fix and enable Fast Read supportDuncan Laurie
2012-11-12Add bd82x6x mainboards ASPM overrides.Marc Jones
2012-11-12SPI: Configure Software Sequence SPI Freq to match descriptorDuncan Laurie
2012-11-12SPI: Add Fast Read to the OPMENU for locked down SPIDuncan Laurie
2012-11-12Define post codes for OS boot and resumeDuncan Laurie
2012-11-12Pass correct sleep type to mainboard sleep handlerStefan Reinauer
2012-11-09PCH: Add register descriptions used by IGD OpRegionStefan Reinauer
2012-11-09Add IGD Opregion variables to NVSStefan Reinauer
2012-11-09SPI: re-init SMM SPI driver after lockdownDuncan Laurie
2012-11-08smi: make tseg_relocate check pointer offsetDuncan Laurie
2012-11-08elog: add extended management engine eventDuncan Laurie
2012-11-08spi: fix erase in SMM while SPIBAR is lockedDuncan Laurie
2012-11-07ELOG: Don't disable SPI controller lockdownDuncan Laurie