Age | Commit message (Collapse) | Author |
|
This does the following:
- Add gen[1-4]_dec options to the devicetree to set up generic LPC
decode ranges in the southbridge code.
- Move setting up some default decode ranges to a common place. If
somehow a board needs to override this behavior it can happen in the
mb_setup_superio() hook (that will be renamed when moving to
C_ENVIRONMENT_BOOTBLOCK).
Change-Id: I3d904b1125bc410c11aa73a89b1969284e88dac1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A few notable changes:
- Microcode init is done in assembly during the CAR init.
- The DCACHE_BSP_STACK_SIZE is set to 0x2000, which is the same size
against which the romstage stack guards protected.
- The romstage mainboard_lpc_init() hook is removed in favor of the
existing bootblock_mainboard_early_init().
Change-Id: Iccd7ceaa35db49e170bfb901bbff1c1a11223c63
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Some of the initialization isn't necessary before console INIT is
done.
EHCI debug still works fine on the Lenovo Thinkpad X201.
Change-Id: I0c33efd98844f7188e0258cf9f90049d45145e7c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35949
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards with the G41 chipset lacked programming CIR, so this
change add that to those boards too.
Change-Id: Ia10c050785170fc743f7aef918f4849dbdd6840e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This is now done during the romstage.
Change-Id: I7c1a848ae871ffb73c09ee88f96331d6b823e39d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Minimize use of hard-coded value for acpi_table_header->length to soft
code. Replace length of acpi_header_t with sizeof(acpi_fadt_t).
Change-Id: Ibcae72e8f02497719fcd3f180838557e8e9abd38
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Devices behind LPC can expose more buses (e.g. I2C on a super-i/o).
So we should scan buses on LPC devices, too.
Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RCBA_HPTC needs to be read back to consistently enable HPET.
This ought to fix raminit failing sometimes and SeaBIOS endlessly
waiting for user input.
TESTED on Intel D510MO, Fixes SeaBIOS waiting for input, without a
timeout.
Change-Id: I20a25fd97cd09fedb70469262c64d8d3828bb684
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35758
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change does the following:
- Move PCH init code from the common romstage to sb code, this allows
for easier reuse in bootblock
- Provide a common minimal LPC io decode setup, mainboards can
override this in the mainboard_lpc_init if required
- Set up LPC generic IO decode up in romstage based on devicetree
settings
- Remove the ramstage LPC generic IO decode from ramstage as this is
now done in romstage.c
- Get rid of unneeded setup of spi_read configuration in BIOS_CNTL as
this is already done in the bootblock.
Change-Id: I3f448ad1fdc445c4c1fedbc8497e1025af111412
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move the mainboard_romstage_entry to a common location and provide
mainboard specific callbacks.
Change-Id: Ia827053617cead5d2cf8e9f06cb68c2cbb668ca9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is based on the sandybridge settings.
The current lookup table comes from the x201 vendor lookup table.
Tested: USB mouse and webcam still work and current registers are the
same as before. USB IR are not but the code follows EDS instead of the
register replay.
Change-Id: Icea9673623a62e7039d5700100a2ee238478abd1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35762
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RCBA_HPTC needs to be read back to properly work.
This fixes SeaBIOS endlessly waiting for input instead of booting the
default entry. Linux already fixes this itself.
Change-Id: I22b8b34924f2add2185ec46470c1559bf2fb6d58
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35757
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This does the following:
- implement a PCH disable function that will be called by the PCI
drivers as part of their chip_ops
- removes the iobp_x calls as those don't exist on ibexpeak
- complete the devicetree with to be disabled PCI devices for the
chip_ops to be called
- Clean up some code copied from bd82x6x
Change-Id: I78d25ffe9af482c77d397a9fdb4f0127e40baddc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This properly sets up the chipset initialization registers, instead of
replaying an RCBA dump.
The information is taken from the EDS and from the thinkpad x201
vendor BIOS disassembly and from an HP UEFI.
TESTED on Thinkpad X201. Seems stable at booting, rebooting and resume
from S3.
Change-Id: I21c2beaf70da27dbe6a56e2612df2c257c05fc62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The extra PCI bus RST# and 200ms delay there was workaround
for custom add-on hardware.
Change-Id: I38c4677cfb41d620498be8e0c257b517995bad5c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ibd5cd2afc8e41cc50abdda0fb7d063073c3acdc1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35678
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel adopted xx_DEVFN_xx naming for macros expanding to
PCI_DEVFN() starting with apollolake. The ones named
xx_DEV_FUNC are being renamed, or dropped, if they
were generally not used at all for a platform.
Change-Id: I6ead2bc5e41a86c9aeef730f5664a30406414c8c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Minimize use of hard-coded value for acpi_table_header->revision to soft
code. Replace with macro defined in arch/acpi.h for FADT and with the
get_acpi_table_revision function for SSDT.
Change-Id: I99e59afc1a87203499d2da6dedaedfa643ca7eac
Signed-off-by: Sourabh Kashyap <Sourabhka@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35539
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Auto-discoverable PCI devices do not require field .enable_dev
of chip_operations to be set. They are matched with PCI drivers
by the use of PCI vendor and device ID fields.
The name given for the chip_operations struct must match the
pathname the way it is present in the devicetree.cb files. If
there was no match, util/sconfig would currently choose to
use the empty weak declaration it creates in static.c file.
Change-Id: I684a087a1f8ee4e1a5fd83450cd371fcfdbb6847
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add new config option to validate the Intel firmware descriptor against
the fmap layout. This will prevent a firmware descriptor from being used
that could corrupt regions of the bootimage in certian circumstances.
BUG=chromium:992215
TEST=Build firmware image with mismached decriptor and fmp
Without VALIDATE_INTEL_DESCRIPTOR set firmware builds
With VALIDATE_INTEL_DESCRIPTOR set error is shown with mismached
regions
Change-Id: I9e8bb20485e96026cd594cf4e9d6b11b2bf20e1f
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
An original code had a wrong register address 0x27 for AHCI BAR.
The value was aligned incidentally by the code specific of
the pci_read_config32 function to the correct address 0x24.
All 0x24 values in sata.c were changed to the symbolic name
PCI_BASE_ADDRESS_5 and the code was optimized.
An equivalent code was tested on a real hardware.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Change-Id: I33509befe86ff6e333c559c87a0f45886d737df9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35737
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I953e9a7746232b4c40deca55eb6cb3bd7af91496
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
TESTED on Asus P5QC.
Change-Id: I20b87f3dcb898656ad31478820dd5153e4053cb2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30012
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a PCI standard register, no need to alias its
definitions under different names.
Change-Id: Iea6b198dd70fe1e49b5dc0824dba62628dedc69a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implementation of ich_pci_dev_enable_resources() used to have
a custom implementation to program PCI subsystem IDs for the
(legacy) PCI bus bridge.
With the local implementation removed, we no longer need the
custom .enable_resources callback.
Change-Id: I6f73fd0e4d5a1829d1555455c9a143f1d18a6116
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Petr Cvek <petrcvekcz@gmail.com>
|
|
Many supported SST flashes use the AAI OP (0xad) to write.
TESTED on Thinkpad X60 with SST25VF016B, flashrom can use AAI_WRITE op
with locked down SPIOPS.
Change-Id: Ica72eda04a8d9f4e563987871b1640565c6e7e12
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This also reworks the interface to override OPs from the devicetree to
match the interface in sb/intel/common/spi.
Change-Id: I534e989279d771ec4c0249af325bc3b30a661145
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ie3f3c043daa6ec18ed14929668e5acae172177b3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CB:29633 switched platform to use sb/common spi implementation,
which worked until CAR_GLOBAL was removed in CB:30506.
Revert the changes back to usage of CAR_GLOBAL in the common spi
driver so that flashconsole will work again in romsatge for
fsp_broadwell_de.
Test: verify flashconsole functional on out-of-tree Broadwell-DE board
Change-Id: I72e5db1583199b5ca4b6ec54661282544d326f0f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I024805769ad05f995a23669a82f5482ce3e7ae70
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I9fbefac3bef7425d6f5ea1bcc01eb21485315c36
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
As we redirect all `dd` output to /dev/null (it would clutter the
console otherwise), there is no error message if a binary to be
added isn't found. If we add them as dependency, OTOH, `make` will
complain properly.
Change-Id: I40c3979b84341cb88c7e9a5084c1a97230ea5503
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33327
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia9a6b0c7f2a07796f850acd2349067ba5e5eb735
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
../bd82x6x/early_usb.c: While ibexpeak needs an equivalent of this
code, it is not currently hooked up.
../common/gpio.c: Already linked in common/Makefile.inc
Change-Id: I980601e2302f2c412e823fef5fb9a69b9e151322
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35437
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4f38be28d81c0c01c0389210552232e63ea55545
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34934
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8578cf365addc47550e27c9ebed08de340d70ede
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33531
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I898188d31fcfd153eb95d0a7324fa9fd85316e3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ifa88e3fd824ec57c21de5967e1634c8823fe0fbb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33730
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove cases of __PRE_RAM__ and other preprocessor guards.
Change-Id: Id295227df344fb209d7d5fd12e82aa450198bbb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34928
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I52a7b39566acd64ac21a345046675e05649a40f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34980
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Variable length arrays were a feature added in C99 that allows the
length of an array to be determined at runtime. Eg.
int sum(size_t n) {
int arr[n];
...
}
This adds a small amount of runtime overhead, but is also very
dangerous, since it allows use of an unlimited amount of stack memory,
potentially leading to stack overflow. This is only worsened in
coreboot, which often has very little stack space to begin with. Citing
concerns like this, all instances of VLA's were recently removed from the
Linux kernel. In the immortal words of Linus Torvalds [0],
AND USING VLA'S IS ACTIVELY STUPID! It generates much more code, and
much _slower_ code (and more fragile code), than just using a fixed
key size would have done. [...] Anyway, some of these are definitely
easy to just fix, and using VLA's is actively bad not just for
security worries, but simply because VLA's are a really horribly bad
idea in general in the kernel.
This patch follows suit and zaps all VLA's in coreboot. Some of the
existing VLA's are accidental ones, and all but one can be replaced with
small fixed-size buffers. The single tricky exception is in the SPI
controller interface, which will require a rewrite of old drivers
to remove [1].
[0] https://lkml.org/lkml/2018/3/7/621
[1] https://ticket.coreboot.org/issues/217
Change-Id: I7d9d1ddadbf1cee5f695165bbe3f0effb7bd32b9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Rename southbridge_smm_X to smm_southbridge_X.
Rename most southcluster_smm_X to smm_southbridge_X.
Change-Id: I4f6f9207ba32cf51d75b9ca9230e38310a33a311
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34856
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I258fccc5e1db0bedb641c8af8cb9727954d4d7c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic1e3cae5298997b552020b78e6ff56d60cf22036
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34821
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9a4e57f8fd032f2824eab0e5b59d635710e3e24b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Any platform should need just one of these.
Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4aaa67ba3de82b07e0e278be39a93a482bbf09c4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34819
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove a spurious reference: the `optype` field is already the pointer
we want.
Change-Id: I65eb3a519db9037c84750c5d40e3f19a1e360361
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Set FD bit if xHCI is disabled in devicetree.
Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch appends a unit (milliseconds) to time-out macro names for
better understanding the code which is using the macros.
Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides an increased timeout (60ms -> 1s) for SPI
HW-sequencing flash erase operations. Without that the erase for MRC
cache writing on siemens/mc_bdx1 sometimes goes wrong because the
timeout stops waiting for flash cycle completion. It was found
during continuous integration. Investigation showed that the used flash
type takes sporadic (e.g. 5% of the test cycles) more time for completion
of erasing operation if the ambient temperature increases. The measured
time values are in range of data sheet of SPI flash. 60ms is a typical
value. So increasing the value is necessary.
tested on siemens/bdx1; measured time values with increased ambient
temperature of flash were always smaller than worst case value of 1s.
Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx:
Detect if the southbridge supports AHCI) but we forgot to update the
`chip.h` and devicetrees.
Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The processor P_BLK doesn't support throttling. This behaviour could be
emulated with SMM, but instead just update the FADT to indicate no support
for legacy I/O based throttling using P_CNT.
We have _PTC defined in SSDT, which should be used in favour of P_CNT by
ACPI aware OS, so this change has no effect on modern OS.
Drop all occurences of p_cnt_throttling_supported and update autoport
to not generate it any more.
Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Taken from
"Intel 6 Series Chipset and Intel C200 Series Chipset"
Document Number: 324645-006 and
"Intel 5 Series Chipset and Intel 3400 Series Chipset"
Document Number: 322169-004 and
"Intel 6 Series Chipset"
Document Number: 324645-001.
UPDCR was found in GNU/Linux's drivers/pci/quirks.c.
DMC2 was guessed as it's close to DMC and defined for 5 series chipset.
Test:
Run BUILD_TIMELESS=1 and compared the coreboot.roms, no differences.
Change-Id: I4fed7c38078cabd4308424c7547416e87c9e6fa7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move the SMM lock outside the function as it is renamed.
Replace conditional !PARALLEL_MP with SMM_ASEG to better
reflect the use.
Change-Id: I93bf0d2f711f94a5bb741bdcd92c1e0fec228684
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
With PARALLEL_MP the lock has been moved elsewhere.
Change-Id: I2db78fe99aa1d46c5e7bcef99a37619301c98914
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id375999adad71d95d4968398e90bc3c07f65ea83
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34254
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id9abc239a92fa7d3e29738f08f2ccdaf3232dfb6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In our codebase, this is only coupled with intel/e7505.
The PCI registers reference here were for intel/i945.
Also aseg_smm_lock() was previously not called.
Change-Id: I21d991c8c2f5c2dde1f148fd80963e39d9836d3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34149
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This southbridge code may be built with either ASEG or TSEG.
Fix minor collision in namespaces.
Change-Id: I04f90fb308c280621a3037fee4bece1e5655480e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is really an inverse of SMM_TSEG to flag
platforms that should potentially move away
from ASEG implementation.
Change-Id: I3b9007c55c75a59a9e6acc0a0e701300f7d21f87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Build of the entire smm-class is skipped if we have
HAVE_SMI_HANDLER=n.
Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I12e238b3a33c909103986822bd7398e1c3bac676
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This also removes the relevant RCBA replays the mainboard dir.
Change-Id: I75dd9d1bcd09d835f205a51c087d52ebb4e166f6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Thomas Heijligen <src@posteo.de>
|
|
Change-Id: I30f80c237bccf8dc350249fd12ca6c4559d23d4f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This adds a common place to set the final opprefix, optype and opmenu,
with a hook to override the opmenu.
Change-Id: I162ae6bad7da3ea02b96854ee28e70594e210947
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Like the line above it, this should be & instead of | (otherwise it will
always incorrectly return true). spi_locked() is only used internally to
decide which opcodes will be used to talk to the flash, and if it is
falsely reported as locked, the worst case should be a denial of service
(unless there are more bugs).
Change-Id: I5208b523c815d15d7263594f06ccfacd8a9510b1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I2874bc37c6bceb2b22115a09ed1501ce917b4623
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: If359eaa010949427dbff1e3a83528c0ad399dc9d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32943
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set up generic decode ranges based on the devicetree settings.
Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
TODO: There is no reason to do this in SMM.
Change-Id: I8bbb2f65bbe674bd1bc4ae8a4086bd1f5e9a79fa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33139
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Braswell supports i2c block writes using SMBus controller.
This support is missing in actual smbus routines.
Add do_i2c_block_write() which is a based on do_smbus_block_write() but
also write first byte to SMBHSTDAT1.
The caller needs to configure the SMBus controller in i2c mode.
In i2c mode SMBus controller will send the next sequence:
SMBXINTADD, SMBHSTDAT1, SMBBLKDAT .. SMBBLKDAT
To ensure the the command is send over the bus the SMBHSTCMD register must
be written also
BUG=N/A
TEST=Config eDP for LCD display on Facebook FBG-1701
Change-Id: I40f8c0f5257a62398189f36892b8159052481693
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ib0b63c3b0342c62aeabb5c6e418eb9811fc6597d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This was done to update the global variable g_ichspi_lock but this is
now removed in favor of reading the lock bit during runtime instead of
keeping track of the state.
Change-Id: I8cb69a152b0e050d64d8979ee92de2d24136f8dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33390
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPI swseq controller can be locked in other parts of the code, for
instance when it's locked down in the finalize section. The driver
has to be made aware of that. The simpler solution is to not keep
track of the state and simply read out the lock bit on each SPI
transfer.
Change-Id: Ifcd5121b89d6f80fc1c1368786982d0d9fa1bf61
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7509dc2124ee7057af075c7d0607ec615b930fa3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id0ed621b5b4b5634d454811b1e1beeb27fc69ea8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This allows to port C_ENVIRONMENT_BOOTBLOCK to sandybridge separately
from nehalem.
Change-Id: If3c6619cf22d1e2995eb19823b0f3f969d252b3b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This automatically detects whether the southbridge supports AHCI.
If AHCI support is selected it will be used unless "sata_no_ahci" is
set in the devicetree to override the behavior.
Change-Id: I8d9f4e63ae8b2862c422938f3103c44e761bcda4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
outw takes (value, addr) not (addr, value)
Change-Id: I6c00413ce9b9b6a3d5691d71ade2b12b08538622
Signed-off-by: Hannah Williams <hannah.williams@dell.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I3d743e90444292be687999ab4f50aa89d514fbad
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33171
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows to use the CONFIG_CONSOLE_SPI_FLASH.
Change-Id: I563c69ce6337d46380f889f42633e858ac207916
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: Ia2bc9bb0f0ece5ae3a57662b54f3e7e78ce00b19
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
<types.h> is supposed to provide <stdint.h> and <stddef.h>.
When <types.h> is included, <stdint.h> and/or <stddef.h> is removed.
Change-Id: I4d8628e4ce3c7f80da2590b4cad618b290e0d513
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
The file and all of it's functions are unused. Drop the dead code.
Change-Id: Iaddd7a688d431d40f38293939e084d19b286aed4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: David Guckian
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since all targets using sb/intel/common and cpu/intel/smm/gen1
are now using PARALLEL_MP, some code is not used anymore.
Change-Id: Ibdc2bb0f1412366b945813efbc1b6451d27f376f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30019
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TODO in followup patch: Some not mainboard specific things should be
moved out of mainboard_smi_apmc.
Change-Id: Ifc2d8f7755ace598e66b162d071d472093e4656e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This adds a file i82801gx/bootblock_gcc.c since other targets that
don't yet C_ENVIRONMENT_BOOTBLOCK still use the romcc compiled
bootblock.c.
Tested on Foxconn D41S.
Change-Id: I7e74838b0d5e9c192082084cfd9821996f0e4c50
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move the DMI initialization code to northbridge folder.
Leave southbridge specific settings in bd82x6x folder and call it from
northbridge code.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ib0b47391f3309f9ab0c3a3a8d525f38f8cca73c0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use RCBA and DMIBAR macros to get rid of DEFAULT_RCBA and DEFAULT_DMIBAR.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ic9be2240ea10b17c8cc289007dccadbb9e3f69ab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Add a few comments and use known register values.
Based on the "2nd Generation Intel® Core™ Processor Family Mobile"
datasheet and the existing serialice trace.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to GNU/Linux.
Change-Id: I404515b77a22324f55581f117d79630be4ba64dd
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32071
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If358e221021466f0058bfc84a322750b34a36d5f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I2556c150f53d9580bc3b70ab49b3a2c8477c18ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Use BIOS_CNTL defined macro instead of magic number.
Change-Id: I0d2b555ada9c2893af4f85422128f5a8b04e2fc6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
We keep the support, though. Just now that `libgfxinit` is fixed, we
don't need the distinction anymore. Causally, we also don't need
CPU_INTEL_MODEL_306AX any more.
TEST=Played tint on kontron/ktqm77. Score 606
Change-Id: Id1e33c77f44a66baacba375cbb2aeb71effb7b76
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
PCI_MIN_GNT is defined at offset 0x3e in <pci_def.h> which does not
apply to this PCI bridge because it is only defined for
"Header type 0 (normal devices)" (line 82).
Some lines obove that code line, the "write" on BCTRL is already done.
Change-Id: I8f1b98ba627947ab6652a4ba31d2acb159dd3e32
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32700
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI_MIN_GNT is defined at offset 0x3e in <pci_def.h> which does not
apply to this PCI bridge because it is only defined for
"Header type 0 (normal devices)" (line 82).
BCTRL registry for D30:F0 is defined at offset 0x3e for i82801gx
(see ICH7 Family Datasheet page 355).
The write on that register is already done some lines above.
So remove wrong register name and the wrong code line.
Change-Id: Ib8a0514200f424049503bb8e4bc076ee6ae86ce3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I028013bd7511b5b9fc80e5f744fcad584cb25fd3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31027
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If08bea821043bc8e661bf5327f4fe2cef3a65be8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|