summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
AgeCommit message (Expand)Author
2014-09-05i82801gx: Kill unused TCG and SMI1Vladimir Serbinenko
2014-08-30sandybridge: Add native sandybridgeVladimir Serbinenko
2014-08-18southbridge/intel/fsp_rangeley: fix to include irqroute.h twiceMartin Roth
2014-08-12gm45: Move S3 detection to enable stage.Vladimir Serbinenko
2014-08-12i82801ix: Make RP04 optionally hotpluggable.Vladimir Serbinenko
2014-08-11i82801ix: Declare gen decode registers.Vladimir Serbinenko
2014-08-10lynxpoint: Add interrupt for GPIO controller in ACPI deviceDuncan Laurie
2014-08-10intel/fsp_bd82x6x: Fix cycle error some morePatrick Georgi
2014-08-03intel/fsp_bd82x6x: Fix cycle errorPatrick Georgi
2014-08-01i82801ix: Provide ramstage smbus functions.Vladimir Serbinenko
2014-07-30southbridge/intel: Add fsp_rangeley supportMartin Roth
2014-07-30i82801ix: Allow configuration of SATA mode in CMOS.Vladimir Serbinenko
2014-07-30i82801ix: Enable usbdebug options.Vladimir Serbinenko
2014-07-29sandy/ivybridge: Native raminit (lint clean)Edward O'Callaghan
2014-07-29sandy/ivybridge: Native raminit.Vladimir Serbinenko
2014-07-17intel/lynxpoint/Kconfig: Remove duplicate option `IFD_BIN_PATH`Paul Menzel
2014-07-17southbridge,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-17southbridge,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-15southbridge/intel/bd82x6x/me_8.x.c: Trivial - space to tab fixEdward O'Callaghan
2014-07-14SPI: Split writes using spi_crop_chunk()Kyösti Mälkki
2014-07-12libpayload: find source of input charactersLuigi Semenzato
2014-07-11intel/lynxpoint: Allow to always route USB3 ports to XHCIStefan Reinauer
2014-07-11intel/lynxpoint: Work around XHCI resume issuesDuncan Laurie
2014-07-11intel/lynxpoint: xhci: Revert suspend/resume changesDuncan Laurie
2014-07-08southbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-05spi: Change spi_xfer to work in units of bytes instead of bits.Gabe Black
2014-07-05spi: Remove unused parameters from spi_flash_probe and setup_spi_slave.Gabe Black
2014-07-05intel/lynxpoint: Build intermediate step to add Lynx Point ME imageDuncan Laurie
2014-07-05intel/lynxpoint: xhci: Port reset changes on suspend/resumeDuncan Laurie
2014-07-05intel/lynxpoint: Export pch_enable_lpc() for Super I/O systemsStefan Reinauer
2014-07-04intel/lynxpoint: Add SATA DEVSLP disable optionMarc Jones
2014-07-04intel/lynxpoint: Add CONFIG_LOCK_MANAGEMENT_ENGINE entry to KconfigDuncan Laurie
2014-07-04intel/lynxpoint: Use separate SMI callback for USB XHCI routingDuncan Laurie
2014-07-04intel/lynxpoint: Make inclusion of Intel ME optionalPaul Menzel
2014-07-04intel/lynxpoint: Allow building without IFD (descripter.bin)Paul Menzel
2014-07-01stdlib: Drop duplicates of min() and max()Kyösti Mälkki
2014-06-29southbridge/intel/ibexpeak/me.c: Silence warns about unused funcEdward O'Callaghan
2014-06-25intel/lynxpoint: xhci: Update magic bits to new magic valuesDuncan Laurie
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
2014-06-20southbridge/intel/lynxpoint/me_9.x.c: Use IS_ENABLED macroEdward O'Callaghan
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
2014-06-12intel/bd82x6x: Skip unknown MBP.Vladimir Serbinenko
2014-06-11ibexpeak: Set number of USB ports.Vladimir Serbinenko
2014-06-11ibexpeak: Remove some dead code.Vladimir Serbinenko
2014-05-17build: separate CPPFLAGS from CFLAGSPatrick Georgi
2014-05-17build: CPPFLAGS is more common than INCLUDESPatrick Georgi
2014-05-09cougar_canyon2: Switch CPU/NB/SB to the shared FSP codeMartin Roth
2014-04-11intel/*bd82x6x/acpi/pch.asl: Correct name of field unit to GP03Paul Menzel
2014-04-09lynxpoint: Fix SerialIO ACPI compile issue with recent IASLDuncan Laurie
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
2014-03-04ibexpeak/ehci: Set .enable_resources properly.Vladimir Serbinenko
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
2014-02-20ibexpeak/thermal: set temperature target in early init.Vladimir Serbinenko
2014-02-19ibexpeak/lpc: Fix PCIIDs.Vladimir Serbinenko
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
2014-02-17ibexpeak/azalia: Remove C4-register extended init.Vladimir Serbinenko
2014-02-17ibexpeak/sata: Add PCI ID from Easynote LM.Vladimir Serbinenko
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
2014-02-12lynxpoint: Do not put SerialIO devices into D3Hot in ACPI modeDuncan Laurie
2014-02-10usbdebug: Remove duplicate port claimKyösti Mälkki
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
2014-02-06usbdebug: Drop obsolete codeKyösti Mälkki
2014-02-01ibexpeak: add smbus_write_byteVladimir Serbinenko
2014-02-01bd82x6x: Add smbus_write_byteVladimir Serbinenko
2014-01-23sandy/ivy SPI: Support hardware sequencing and use with multiple chipsVladimir Serbinenko
2014-01-23X201: Enable expresscard hotplug.Vladimir Serbinenko
2014-01-23nehalem: Fix SMRAM register addressVladimir Serbinenko
2014-01-23Ibexpeak: add missing thermal init.Vladimir Serbinenko
2014-01-22Lenovo X230: new portVladimir Serbinenko
2014-01-12ibexpeak / bd82x6x: Make SATA mode user-visible option.Vladimir Serbinenko
2014-01-12ibexpeak: Fix timings for IDE mode.Vladimir Serbinenko
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
2014-01-09bd82x6x/ibexpeak: Make DRAM reset gate GPIO configurableVladimir Serbinenko
2014-01-06nehalem: Simplify smi.c by using __SIMPLE_DEVICE__Vladimir Serbinenko
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
2013-12-21lynxpoint: XHCI: Don't put device in D3 in _PS0 MethodDuncan Laurie
2013-12-21lynxpoint: Fix an issue clearing port change status bitsDuncan Laurie
2013-12-21lynxpoint: XHCI: Advertise D3 as lowest wake stateDuncan Laurie
2013-12-21lynxpoint: Fix issues with XHCI initDuncan Laurie
2013-12-21lynxpoint: Route all USB ports to XHCI in finalize stepDuncan Laurie
2013-12-21lynxpoint: Move USB SMI sleep code to separate USB filesDuncan Laurie
2013-12-21lynxpoint: Add configuration option for SATA gen3 DTLE registersShawn Nematbakhsh
2013-12-21haswell: Misc updates from 1.6.1 ref codeDuncan Laurie
2013-12-21lynxpoint: Add devicetree config option to force enable ASPMDuncan Laurie
2013-12-21lynxpoint: me: Disable some verbose messagesDuncan Laurie
2013-12-21lynxpoint: me: Support ICC clock enables messageDuncan Laurie
2013-12-21lynxpoint: me: Allow for more than MKHI MEI messagesDuncan Laurie
2013-12-21lynxpoint: Avoid any ME device communication in S3 pathDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21lynxpoint xhci: Add ACPI D0/D3 workaroundsDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21lynxpoint: power management setup tweakDuncan Laurie
2013-12-21lynxpoint: Add LPT-LP device id and smbus_write_byteDuncan Laurie
2013-12-18lynxpoint: Don't write to non-existent EHCIDuncan Laurie
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
2013-12-05lynxpoint: Update LPT-LP PM settingsDuncan Laurie
2013-12-05lynxpoint: enable clock gatingAaron Durbin
2013-12-05lynxpoint: provide gpio_is_native()Aaron Durbin