Age | Commit message (Expand) | Author |
2014-02-25 | lynxpoint: Kill alternative cbfs_load_payload. | Vladimir Serbinenko |
2014-02-20 | ibexpeak/thermal: set temperature target in early init. | Vladimir Serbinenko |
2014-02-19 | ibexpeak/lpc: Fix PCIIDs. | Vladimir Serbinenko |
2014-02-18 | lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOS | Duncan Laurie |
2014-02-17 | ibexpeak/azalia: Remove C4-register extended init. | Vladimir Serbinenko |
2014-02-17 | ibexpeak/sata: Add PCI ID from Easynote LM. | Vladimir Serbinenko |
2014-02-16 | usbdebug: Remove EHCI_DEBUG_OFFSET | Kyösti Mälkki |
2014-02-12 | lynxpoint: Do not put SerialIO devices into D3Hot in ACPI mode | Duncan Laurie |
2014-02-10 | usbdebug: Remove duplicate port claim | Kyösti Mälkki |
2014-02-06 | usbdebug: Move under drivers/usb | Kyösti Mälkki |
2014-02-06 | usbdebug: Drop obsolete code | Kyösti Mälkki |
2014-02-01 | ibexpeak: add smbus_write_byte | Vladimir Serbinenko |
2014-02-01 | bd82x6x: Add smbus_write_byte | Vladimir Serbinenko |
2014-01-23 | sandy/ivy SPI: Support hardware sequencing and use with multiple chips | Vladimir Serbinenko |
2014-01-23 | X201: Enable expresscard hotplug. | Vladimir Serbinenko |
2014-01-23 | nehalem: Fix SMRAM register address | Vladimir Serbinenko |
2014-01-23 | Ibexpeak: add missing thermal init. | Vladimir Serbinenko |
2014-01-22 | Lenovo X230: new port | Vladimir Serbinenko |
2014-01-12 | ibexpeak / bd82x6x: Make SATA mode user-visible option. | Vladimir Serbinenko |
2014-01-12 | ibexpeak: Fix timings for IDE mode. | Vladimir Serbinenko |
2014-01-12 | CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_file | Vladimir Serbinenko |
2014-01-10 | Replace all occurences of sprintf with snprintf | Vladimir Serbinenko |
2014-01-09 | bd82x6x/ibexpeak: Make DRAM reset gate GPIO configurable | Vladimir Serbinenko |
2014-01-06 | nehalem: Simplify smi.c by using __SIMPLE_DEVICE__ | Vladimir Serbinenko |
2013-12-23 | Coding style: punctuation cleanup [1/2]. | Idwer Vollering |
2013-12-21 | lynxpoint: XHCI: Don't put device in D3 in _PS0 Method | Duncan Laurie |
2013-12-21 | lynxpoint: Fix an issue clearing port change status bits | Duncan Laurie |
2013-12-21 | lynxpoint: XHCI: Advertise D3 as lowest wake state | Duncan Laurie |
2013-12-21 | lynxpoint: Fix issues with XHCI init | Duncan Laurie |
2013-12-21 | lynxpoint: Route all USB ports to XHCI in finalize step | Duncan Laurie |
2013-12-21 | lynxpoint: Move USB SMI sleep code to separate USB files | Duncan Laurie |
2013-12-21 | lynxpoint: Add configuration option for SATA gen3 DTLE registers | Shawn Nematbakhsh |
2013-12-21 | haswell: Misc updates from 1.6.1 ref code | Duncan Laurie |
2013-12-21 | lynxpoint: Add devicetree config option to force enable ASPM | Duncan Laurie |
2013-12-21 | lynxpoint: me: Disable some verbose messages | Duncan Laurie |
2013-12-21 | lynxpoint: me: Support ICC clock enables message | Duncan Laurie |
2013-12-21 | lynxpoint: me: Allow for more than MKHI MEI messages | Duncan Laurie |
2013-12-21 | lynxpoint: Avoid any ME device communication in S3 path | Duncan Laurie |
2013-12-21 | lynxpoint me: add support for mbp clear wait in finalize step | Duncan Laurie |
2013-12-21 | lynxpoint xhci: Add ACPI D0/D3 workarounds | Duncan Laurie |
2013-12-21 | Revert "lynxpoint: Move ME lock down to ramstage" | Duncan Laurie |
2013-12-21 | lynxpoint: power management setup tweak | Duncan Laurie |
2013-12-21 | lynxpoint: Add LPT-LP device id and smbus_write_byte | Duncan Laurie |
2013-12-18 | lynxpoint: Don't write to non-existent EHCI | Duncan Laurie |
2013-12-12 | HDA: Enable Mini-HDA and fix up PCH-HDA init | Duncan Laurie |
2013-12-12 | peppy: Disable audio codec enable GPIO in S3 + S5. | Shawn Nematbakhsh |
2013-12-05 | lynxpoint: Update LPT-LP PM settings | Duncan Laurie |
2013-12-05 | lynxpoint: enable clock gating | Aaron Durbin |
2013-12-05 | lynxpoint: provide gpio_is_native() | Aaron Durbin |
2013-12-05 | lynxpoint: implement additional programming steps | Stefan Reinauer |
2013-12-05 | lynxpoint: disable pcie devices based on config | Aaron Durbin |
2013-12-05 | intel/fsp_bd82x6x: Use correct type pointer for mainboard_smi_gpi | Alexandru Gagniuc |
2013-12-04 | Add Intel FSP bd82x6x southbridge support | Marc Jones |
2013-12-03 | ibexpeak: ensure config compatibility with bd82x6x | Vladimir Serbinenko |
2013-12-03 | lynxpoint: Fix LPT-LP PME_B0 bit offset in ACPI _PRW objects | Duncan Laurie |
2013-12-02 | global: Fix usage of get_option() to make use of CB_CMOS_ codes | Alexandru Gagniuc |
2013-12-02 | lynxpoint: move all pcie device handling to pcie.c | Aaron Durbin |
2013-12-02 | lynxpoint: expose pch_disable_devfn() | Aaron Durbin |
2013-12-02 | lynxpoint: expose iobp functions | Aaron Durbin |
2013-12-01 | lynxpoint: Do not clear ACPI NVS region on resume | Duncan Laurie |
2013-11-30 | ibexpeak: set HAVE_USBDEBUG_OPTIONS | Vladimir Serbinenko |
2013-11-26 | lynxpoint: Add an inverted input GPIO type | Duncan Laurie |
2013-11-25 | lynxpoint: Enable USB clock gating, late setup, and sleep prep | Duncan Laurie |
2013-11-25 | lynxpoint: Add ACPI Method to enable GPIO as wake source | Duncan Laurie |
2013-11-25 | lynxpoint: Enable extra 16 IOAPIC entries for GPIO PIRQ | Duncan Laurie |
2013-11-25 | lynxpoint: fix mem corruption during ssdt2 gen | Aaron Durbin |
2013-11-25 | lynxpoint: Fix XHCI controller device in ACPI | Duncan Laurie |
2013-11-25 | lynxpoint: Enable SerialIO clock in PCI mode | Duncan Laurie |
2013-11-25 | slippy: Enable EC SMI | Duncan Laurie |
2013-11-25 | lynxpoint: update azalia device ids | Aaron Durbin |
2013-11-25 | lynxpoint: Change SerialIO device enable reporting to ACPI | Duncan Laurie |
2013-11-25 | slippy: Minor vboot related fixes | Duncan Laurie |
2013-11-25 | lynxpoint: Expose ACPI Device for LP GPIO controller | Duncan Laurie |
2013-11-25 | lynxpoint: Move ME lock down to ramstage | Duncan Laurie |
2013-11-25 | lynxpoint: Add missing ME MBP entries | Duncan Laurie |
2013-11-25 | lynxpoint: export mem console pointer in ACPI | Aaron Durbin |
2013-11-25 | lynxpoint: Updates to power management and clock gating | Duncan Laurie |
2013-11-25 | Support for Ibexpeak southbridge | Vladimir Serbinenko |
2013-11-24 | haswell: Configure PCH power sharing for ULT | Duncan Laurie |
2013-11-24 | lynxpoint: Add a function to set an individual GPIO | Duncan Laurie |
2013-11-24 | lynxpoint: Rework LP GPIO handling | Duncan Laurie |
2013-11-24 | smi: Update mainboard_smi_gpi() to have 32bit argument | Duncan Laurie |
2013-11-24 | slippy: Prepare LPC IO decode ranges for EC | Duncan Laurie |
2013-10-30 | southbridge/intel/i82801ix/lpc.c: Remove unused variable `dummy` | Paul Menzel |
2013-10-22 | usbdebug: Fix boards without EARLY_CBMEM_INIT | Kyösti Mälkki |
2013-10-15 | intel/i82371: Remove HAVE_ACPI_RESUME | Kyösti Mälkki |
2013-10-01 | qemu: q35: avoid address conflict | Gerd Hoffmann |
2013-09-21 | timestamps intel: Move timestamp scratchpad to chipset | Kyösti Mälkki |
2013-09-10 | intel/i945 intel/i82801gx: remove explicit pcie config accesses | Kyösti Mälkki |
2013-09-10 | intel/i82801ix: remove explicit pcie config accesses | Kyösti Mälkki |
2013-09-06 | usbdebug: Fixes for LynxPoint LP | Kyösti Mälkki |
2013-08-29 | intel usbdebug: Add choice of EHCI controller | Kyösti Mälkki |
2013-08-29 | usbdebug: Support choice of EHCI controller | Kyösti Mälkki |
2013-08-29 | usbdebug: Change debug port scanning | Kyösti Mälkki |
2013-08-24 | Add pci_devfn_t and use with __SIMPLE_DEVICE__ | Kyösti Mälkki |
2013-08-23 | usbdebug: Do not support logging from SMM | Kyösti Mälkki |
2013-08-13 | Fix some wait_for_valid functions return value from 1 to -1. | Andrew Wu |
2013-08-09 | intel/sandybridge intel/bd82x6x: remove explicit pcie config accesses | Kyösti Mälkki |
2013-08-02 | Remove unnecessary space characters. | Andrew Wu |
2013-08-01 | intel/lynxpoint: remove explicit pcie config accesses | Kyösti Mälkki |