summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
AgeCommit message (Collapse)Author
2021-06-16sb/intel/i82870: Use ioapic utility functionsKyösti Mälkki
Change-Id: I60ce17fd7640fab064a3d62d8d2b3703993c7b59 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55309 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16arch/x86/ioapic: Drop irq_on_fsb as a configurable itemKyösti Mälkki
APIC Serial Bus pins were removed with ICH5 already, so a choice 'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG 0x3 is also not documented since ICH5. For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was wrong and ignored as BOOT_CONFIG register emulation was never implemented. For ICH4 and earlier, the choice to use FSB can be made based on the installed CPU model but this is now just hardwired to match P4 CPUs of aopen/dxplplusu. For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined and the only possible operation mode there is APIC Serial Bus, which requires no configuration. Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16sb/intel/lynxpoint: Update xHCI _PS0 and _PS3 methodsAngel Pons
Lynx Point PCH ACPI reference code version 1.9.1 has two additional magic steps, which were already present in Broadwell. Add them. Change-Id: Ia8ca6dcfcfb4ed6b0d957d249b93640ef74670d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16sb/intel/lynxpoint/Kconfig: Fix typo in help textAngel Pons
Lynxpont ---> LynxPoint Change-Id: I5af67079ead389beeafd9172aa1b98980dacbd38 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-15nb/intel/sandybridge: Add x86_64 supportPatrick Rudolph
Fix compilation on x86_64 by using compatible types. The MRC blob isn't supported yet as there's no x86_32 wrapper. Tested on HP8200: * Still boots on x86_32. * Boots to payload in x86_64 Change-Id: Iab29a87d52ad3f6c480f21a3b8389a7f49cb5dd8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-12arch/x86/ioapic: Add get_ioapic_id() and get_ioapic_version()Kyösti Mälkki
Change-Id: I4ad080653c9af94a4dc73d93ddc4c8c117a682b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-09sb/intel/lynxpoint: Add SerialIO UART console supportAngel Pons
Derived from Broadwell and adapted to follow what soc/intel does. Note that SERIALIO_UART_CONSOLE is meant to be selected from the mainboards which expose a SerialIO UART. UART_FOR_CONSOLE also needs to be set in mainboard Kconfig accordingly. It is possible that some of the UART configuration steps in bootblock are unnecessary. However, some of the steps turn off power management features and others are undocumented: omitting them could cause weird issues. Finally, add a config file to ensure the code gets build-tested. Tested on out-of-tree Compal LA-A992P, SerialIO UART 0 can be used to receive coreboot and SeaBIOS logs. Change-Id: Ifb3460dd50ed03421a38f03c80f91ae9fd604022 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52489 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07sb/intel/lynxpoint: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled, and C-states are reported using the _CST ACPI object, which overrides the P_LVLx values. Change-Id: I1b623d19a85045797921b4909e01d5ba521de3ad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07sb/intel/bd82x6x: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled, and C-states are reported using the _CST ACPI object, which overrides the P_LVLx values. Change-Id: I737bd58bcda3e7c5f6591e4c2309530ff035e2c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07sb/intel/ibexpeak: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled. The code is missing, but C-states should instead be reported using the _CST ACPI object. Change-Id: I21fd2fa6ee4aa1ed57694549d5cb48159f37af26 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07sb/intel/bd82x6x: Add missing ID for PCI bridgeJames Ye
The PCI device ID 0x244e for the "Intel Corporation 82801 PCI Bridge" for desktop platforms was missing. Change-Id: I22cdbcf518d86af7b93de7731d175088a81bbc1f Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-07sb/intel/bd82x6x: Use array for PCIe ASPM overridesAngel Pons
Using an array reduces the amount of boilerplate code. Change-Id: Ic6a48a01d3b96e69273dc28bdb6699ce7c0931b2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55246 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20sb/intel/lynxpoint: Add pch_iobp_exec() functionAngel Pons
Taken from Broadwell. A follow-up will make Broadwell use the IOBP code from Lynx Point. Change-Id: Iacc90930ad4c34777c8f1af8b69c060c51a123b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52514 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20sb/intel/lynxpoint: Relocate SATA clock gating writeAngel Pons
Do it in the same place as Broadwell. Tested on out-of-tree Compal LA-A992P, SATA still works. Change-Id: I50bd951af52d03ad986dbf4bf70bdae348fa994b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47034 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16sb/intel: Drop outdated SMBus I/O BAR commentAngel Pons
The SMBus I/O bar is not relocated because it's reported to the allocator as a fixed resource. Drop these out-of-date comments. Change-Id: I0149764fd231b3a4e56a5a9b7f4ae61f7954cf7a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-05-07sb/intel/common/pmclib: Use pmbase functionsArthur Heymans
Change-Id: Ic0be2c1ffaadcc6212c548332d60d40b405abbda Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-07sb/intel/common: Fix platform_is_resuming()Arthur Heymans
platform_is_resuming() was using the wrong register (PM1_STS) to figure out if the platform was resuming (PM1_CNT). Change-Id: I1f69dca1da158aae15c6da6d4c898c71d9cdb51f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-07sb/intel/common: Implement acpi_is_wakeup_s3()Arthur Heymans
acpi_is_wakeup_s3() requires acpi_get_sleep_type(). Change-Id: Ibe01863e685bcbc9652a72be0632cfbd83e18380 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-06src: Retype option API to use unsigned integersAngel Pons
The CMOS option system does not support negative integers. Thus, retype and rename the option API functions to reflect this. Change-Id: Id3480e5cfc0ec90674def7ef0919e0b7ac5b19b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-05-05nb/intel: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. Change-Id: Ic92ecf8068f327a893d20924685ce571752d379f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52787 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05sb/intel/lynxpoint: Fix VBOOT with !CONFIG_INTEL_LYNXPOINT_LPArthur Heymans
The Intel Basking Ridge CRB does not have a Lynxpoint LP PCH but was using the lp gpio code instead of the southbridge/intel/common code in verstage. Change-Id: I775d3dc3540fbd8a939701d873183dd016e24ba4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-27sb/intel/common: Refactor _PRT generation to support GSI-based tablesTim Wawrzynczak
Newer Intel SoCs also support _PRT tables, but they route PCI devices to more than just PIRQs, and statically specify IRQs instead of using link devices. Extend/refactor intel_acpi_gen_def_acpi_pirq to support this additional use case. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ica420a3d12fd1d64c8fe6e4b326fd779b3f10868 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-04-26sb/intel/lynxpoint: Add and use power state bit macrosAngel Pons
Tested with BUILD_TIMELESS=1, Google Wolf remains identical. Change-Id: Id85b76c0aaf481f99f55a9ce6d813ff32753e588 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-04-21ChromeOS: Use CHROMEOS_NVS guardKyösti Mälkki
Replace CONFIG(CHROMEOS) with CONFIG(CHROMEOS_NVS) for cases where the conditional and dependency are clearly about the presence of an ACPI NVS table specified by vendorcode. For couple locations also CONFIG(HAVE_ACPI_TABLES) changes to CONFIG(CHROMEOS_NVS). This also helps find some of the CONFIG(CHROMEOS) cases that might be more FMAP and VPD related and not about ChromeOS per-se, as suggested by followup works. Change-Id: Ife888ae43093949bb2d3e397565033037396f434 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50611 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21{sb,soc}/intel: Use `get_int_option` functionAngel Pons
Change-Id: I05f724785880089a513319d70dfd70fc2a6b7679 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-04-21sb/intel/bd82x6x: Use {get,set}_int_optionAngel Pons
Change-Id: Icbfea8c516c42b45d689da92b7e426cb6d5112a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-04-21sb/intel/x/sata.c: Use `get_int_option` for `sata_mode`Angel Pons
Change-Id: Ifd1f3969281e67d1a6ab7eb99dd048799c0cb17d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-04-19sb/intel/common: Drop some PCH_LPC_DEV macrosAngel Pons
The macro definitions depend on __SIMPLE_DEVICE__ and are only used in the get_gpio_base() or lpc_get_pmbase() functions, which already guard PCH_LPC_DEV usage using __SIMPLE_DEVICE__ in preprocessor. Change-Id: I5d3681debe29471dfa143ba100eb9060f6364c93 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-11sb/intel/x/smbus.c: Correct register access widthAngel Pons
The register is 16 bits wide. Change-Id: I58d44a17613965e0a27aab5246dcdce68e1a8201 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-04-06arch/x86: Provide readXp/writeXp helpers in arch/mmio.hAngel Pons
These p-suffixed helpers allow dropping pointer casts in call-sites, which is particularly useful when accessing registers at an offset from a base address. Move existing helpers in chipset code to arch/mmio.h and create the rest accordingly. Change-Id: I36a015456f7b0af1f1bf2fdff9e1ccd1e3b11747 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51862 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06sb/intel/i82371eb: Do not read PM/SMBus I/O ports at runtimeKeith Hui
Commit 023fdaffd1 (mb/asus/p2b: Refactor southbridge ACPI stuff) moved the southbridge ACPI stuff to its own file. It also (prematurely) listed PM and SMBus I/O port ranges as a #defined fixed value. Since these two ranges are not expected to change at runtime anyway, we can simply drop the ASL code doing the read. Change-Id: Id5adb37d047621d7c8faf81607ceea4cbcac3d34 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41093 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06sb/intel/*/smihandler.c: Correct BIOS_CNTL access widthAngel Pons
The BIOS_CNTL register is 8 bits wide on all affected platforms. Change-Id: Iaf9267cf27847d54ed50e1f9ae29011d0e99cf8e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51939 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25nb/intel/haswell: Move USB config API into Lynx PointAngel Pons
Both EHCI and xHCI USB controllers are inside the PCH (southbridge). Now that mainboard USB configuration no longer depends on pei_data.h definitions, the API declarations can be placed in southbridge code. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ia21991b225482b33c5bc0dc52884674d301b28ba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-24sb/intel/common: Use new acpigen_write_PRT_*_entry functionsTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9f573b9bd40260ab963c5a4a965a6ac483af91ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/51158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-22{lynxpoint/broadwell}: Set Azalia HDCFG.BCLD bitAngel Pons
Lock down several HD Audio registers by setting the HDCFG.BCLD bit. Tested on Asrock B85M Pro4, the GCAP register becomes read-only. Change-Id: Id6208289a68baaedc4aad51cc0c5355f996a1b00 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-22{lynxpoint,broadwell}/hda_verb.c: Drop effect-free writeAngel Pons
This bit is hardwired to 1 (Intel High Definition Audio mode). Change-Id: I3683497c5e2446f1d8319037583890b5d0a8a95c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-22sb/intel/lynxpoint/hda_verb.c: Add missing codec detect stepsAngel Pons
Lynx Point reference code version 1.9.1 and soc/intel/common/hda_verb.c perform these steps. Add them to Lynx Point as well. With this change, Lynx Point and soc/intel/common hda_verb.c files are now identical. Change-Id: I2fc592f73697a43bd5a3315ac80c77ff9f00da9b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-22mb/asus/p2b: Refactor southbridge ACPI stuffKeith Hui
Move (remaining) southbridge ACPI stuff into one file under sb/intel/i82371eb, that is simply included from the board's \_SB scope. Change-Id: Ibed49a800dec19534761e5ab22a6cbb1e6bd4a5d Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-22lynxpoint/broadwell: Rename LP GPIO config globalAngel Pons
Do not use the same name as the non-LP GPIO config. This allows checking at build-time that a mainboard uses the correct GPIO config format. Without this commit, there are no build-time errors when using the wrong format of GPIO config, but there would be undefined behavior at runtime. Tested by trying to build asrock/b85m_pro4 and hp/folio_9480m after toggling the `INTEL_LYNXPOINT_LP` Kconfig option (and trimming down the USB config arrays for asrock/b85m_pro4). In both cases, building failed because the necessary GPIO config global is not defined, as expected. Change-Id: Ib06507ef8179da22bdb27593daf972e788051f3a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51661 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22acpi/acpigen.h: Add more intuitive AML package closing functionsJakub Czapiga
Until now every AML package had to be closed using acpigen_pop_len(). This commit introduces set of package closing functions corresponding with their opening function names. For example acpigen_write_if() opens if-statement package, acpigen_write_if_end() closes it. Now acpigen_write_else() closes previously opened acpigen_write_if(), so acpigen_pop_len() is not required before it. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: Icfdc3804cd93bde049cd11dec98758b3a639eafd Reviewed-on: https://review.coreboot.org/c/coreboot/+/50910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-15sb/intel/lynxpoint: Move S3 check out of `early_pch_init`Angel Pons
Done for consistency with other platforms. This also drops redundant S3 resume logging, as `southbridge_detect_s3_resume` already prints it. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Id96c5aedad80702ebf343dd0a351fbd4e7b1c6c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-15sb/intel/lynxpoint: Replace HPET_ADDRAngel Pons
The `HPET_ADDRESS` Kconfig option has the same value. Use it instead. Change-Id: I268e949d4396aa20e38f719b36cc4e6226efe082 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-10nb/intel/haswell: Finalize northbridge in ramstageAngel Pons
There's no need to finalize the northbridge in SMM. This also makes unification with Broadwell easier. Tested on Asrock B85M Pro4, still boots and registers get locked. Change-Id: I8b2c0d14a79e4fcd2e8985ce58542791cef9b1fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/lynxpoint/me.c: Reorder functionsAngel Pons
Rearrange the code to ease comparing against Broadwell. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3143f07ed845e0c6b1444817029a437db3b959e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/lynxpoint: Finalize ME in ramstageAngel Pons
Performing ME finalization in SMM does not seem to be required. Tested on Asrock B85M Pro4, ME still gets finalized successfully. Change-Id: I9fde40a54f3fb8da2fba46c531443fdd2e067077 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/lynxpoint/me.c: Use res2mmio()Angel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I87fa1ffb353135cc361ac6be30a4fc69e7f8ed47 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-03-07sb/intel/lynxpoint: Retype `mei_base_address` pointerAngel Pons
Also introduce uintptr_t cast and use PCI_BASE_ADDRESS_MEM_ATTR_MASK. Change-Id: I32fdcc6b1ffde1b0701218a3bd0a61ab827081b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-07sb/intel/common/pciehp: Replace HP dummy device with common codeArthur Heymans
Use the common PCIEXP_HOTPLUG code to generate a dummy device for PCIe ports supporting hotplug. This allows to have control over how much resources are allocated to hotplug ports. Tested on thinkpad X220: now hotplugging a dGPU via the expresscard slot sometimes works. Change-Id: I3eec5214c9d200ef97d1ccfdc00e8ea0ee7cfbc6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph
2021-03-05sb/intel/lynxpoint: Refactor `usb_xhci_port_count_usb3`Angel Pons
Change the function parameters to avoid preprocessor usage. Change-Id: Iec43e057ed2a629e702e0f484ff7f19fe8a0311b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-05soc/intel/broadwell/pch: Use Lynx Point smbus.cAngel Pons
Continue unifying Lynx Point and Wildcat Point (PCH for Broadwell) code. Define the WPT-LP SMBus PCI device ID, add it to smbus.c of Lynx Point, and drop all now-unnecessary SMBus code from Broadwell. Change-Id: I864d7c2dd47895a3c559e2f1219425cda9fd0c17 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-03sb/intel/lynxpoint/lpc.c: Relocate lock bit writeAngel Pons
This lock bit can be set later, and should also be set for LynxPoint-H. This eases merging with Broadwell, which already sets this lock bit after `spi_finalize_ops()` in a dedicated finalisation function. Tested on Asrock B85M Pro4 (LynxPoint-H), the lock bit is now set. Change-Id: I5c32127f2b4cfdfeb0e30a64e5bdda89958933cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47036 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01sb/intel/bd82x6x: Turn ME PCI register structs into unionsAngel Pons
This allows dropping the `pci_read_dword_ptr` and `pci_write_dword_ptr` wrappers. Change-Id: I7a6916e535fbba9f05451d5302261418f950be83 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49993 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01sb/intel/lynxpoint/me_9.x.c: Rename to me.cAngel Pons
This code will eventually support both ME 9.x and ME 10. Change-Id: Idc02ab668a0b0d51c31f33f1266d983e64fb5505 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-27sb/intel/ibexpeak: Drop useless bd82x6x pcie.cAngel Pons
The PCIe device IDs for Ibexpeak are not in bd82x6x's pcie.c driver. Thus, the code has always been dead code on Ibexpeak. Drop it. Change-Id: Ide2b4af2a187ecf98f39a9c979646a7ed959c74f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51067 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-27sb/intel/ibexpeak: Add all PCI IDs for LPCAngel Pons
Taken from document 322170-028 (5 series specification update). Tested on out-of-tree HP ProBook 6550b (HM57), fixes several issues. Without this patch, EHCI controllers had no IRQ assigned and there were unexpected exceptions about NMIs. With this patch, the issues are gone. Change-Id: Icd31dd89ba49e38a5e4c108a8361dbf636332ab8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51066 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-26sb/intel/lynxpoint: Update LPT-H magic as per RC 1.9.1Angel Pons
Add the missing PM initialization for Lynxpoint-H. There are some small changes to Lynxpoint-LP, since some register writes are common among both PCH variants. This is based on version 1.9.1 of reference code. Remove the `pch_fixups()` function. The DMI configuration is specific to Lynxpoint-H. It is not valid for Lynxpoint-LP, which does not have DMI. Tested on Asrock B85M Pro4, still boots. Registers have the new values. Without this patch, nearly all registers don't have the expected values. Change-Id: Ie3f96f2106f3c23aeb694dd6fb343099fc5784e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47208 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-25sb/intel/lynxpoint/acpi: Add missing USB portsAngel Pons
Broadwell has these devices, so add them to Lynx Point as well. This is done in preparation to have Broadwell boards use Lynx Point ACPI code. Change-Id: Id66f169070cdfe3a6d166ca18916d4ddaf4a5fea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46959 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-23sb/intel/lynxpoint: Refactor some GNVSKyösti Mälkki
Change-Id: I9524a44f8f4b8e286229d81d10704438f11c4580 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-22Revert "lynxpoint: Fix SerialIO ACPI compile issue with recent IASL"Angel Pons
This reverts commit 1a25c9cdfd3fd391328133ba94c63ecd1083e4f8. Reason for revert: No longer necessary. Change-Id: I8adeeebd6e841ef2c878622559dcd15848969842 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-18southbridge: Ensure common Kconfig gets included lastAngel Pons
Change-Id: Icaa64e664499090fec3e98687b4827ef27cc201b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-18sb/intel/ibexpeak: Drop obsolete SATA register settingsAngel Pons
Code was copy-pasted from older chips and has no effect on ibexpeak. Change-Id: I3c5b2b8e4aa6211975c3e3dc1d64432886ef9352 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47864 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-18sb/intel/lynxpoint: Correct read width in RMW cycleAngel Pons
The register is 32 bits wide, so do not read 16 bits out of it. LynxPoint PCH reference code version 1.9.1 always uses 32-bit accesses. Change-Id: I18fbba0603579417e09ae4eb4eb273f7fcd903fc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47098 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16sb/intel: Add missing <types.h>Elyes HAOUAS
Add needed but missing <types.h>. Change-Id: I19d01e1837b1ee946c66d4cc22a5138b64d72078 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50577 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16sb/intel/*/lpc: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: I8f8655853fd1fc1f3679a4549fdaa08702f96c7b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-15mb/google/auron/var/buddy: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Buddy remains identical. Change-Id: I6e6256a9cc88c9d0743150bfdf12b1b482fe157d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50070 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15sb/intel/lynxpoint: Clean up lp_gpio.hAngel Pons
Move `mainboard_gpio_map` declaration inside header and reorder some function declarations. This is to align the header with Broadwell. Change-Id: I436d7fdabf8d574e5dd2787fb6097f384cc8e453 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50065 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14ACPI: Move common _PIC methodKyösti Mälkki
Change-Id: I659835354570fb1d4860fcbddf2a51831170a374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-13sb/intel/bd82x6x: Clean up early_me.c cosmeticsAngel Pons
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: I0dfbaaf4cb17841de109ea6abc08022846b5bd4e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49994 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x/me_smm.c: Deduplicate finalisation codeAngel Pons
The only difference between ME7 and ME8 is the MKHI message handling. Remove duplicated code, and also clean up includes. Change-Id: Ia44eb29d3509eb4208ba2aed9e0cf7e8f8d2c41a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49992 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x: Move ME SMM code into a separate fileAngel Pons
This allows dropping some preprocessor usage. The `mkhi_end_of_post` static functions had to be renamed to avoid a name clash. A follow-up will tidy up the code in me_smm.c to reduce some duplication. Change-Id: I6357fed3540be87f42d1fd59534666b9092d0652 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49991 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x: Relocate some static functionsAngel Pons
This allows us to get rid of the `__unused` attributes. Subsequent commits will separate ramstage and SMM code into separate files. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: I1aaef5aa23561bee04f8dd9ddca66738bca91bb4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49990 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x: Use HPTS() for HPET visibilityKyösti Mälkki
Platforms with bd82x6x do not initialise OSYS, so HPET is always hidden. The two boards lenovo/x201 and packardbell/ms2290 using sb/intel/ibexpeak but still including <bd8x62x/acpi/lpc.asl> initialised OSYS using _OSI() method and showed HPET selectively. Change-Id: I02fffd439be2a5a9d22afd67e68abce888361214 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49486 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13intel/broadwell,lynxpoint: Use HPTS() for HPET visibilityKyösti Mälkki
Platforms do not initialise OSYS so HPET is always hidden. Change-Id: I5f030b156355ea407d37cdb2eda8a3161085436f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-13sb/intel/i82801jx: Use HPTS() for HPET visibilityKyösti Mälkki
Change-Id: I741d94341ed59f5b5fbb8526205e8b502764a15a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50481 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/i82801gx,ix: Use HPTS() for HPET visibilityKyösti Mälkki
Change-Id: Id38228265ad89e3f96ea6f37bcc0da574a3f8c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49484 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb,soc/intel: Add HPTS() for HPET visibilityKyösti Mälkki
Based on the detected OS the HPET ACPI device needs to be hidden sometimes. Change-Id: I4c6f87f30ea0de5c073b1fcf57794bb9e19d4d91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49483 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12sb/intel/x/lpc.c: Drop commented-out `gpio_init` callAngel Pons
Change-Id: I4255c63f87e8243237204ac86eb85e34b5aaa225 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-12sb/intel/x/lpc.c: Drop `pch_disable_smm_only_flashing`Angel Pons
The southbridge common SPI support already does this. Tested on Asrock B85M Pro4, internal flashing and MRC cache still work. Change-Id: I7ce0ca584cd3d42a10cdb74f45742f1eadc01bfa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-12sb/intel/lynxpoint: Do not mask out TCO status bitsAngel Pons
Not all TCO status bits have a corresponding enable bit. Masking out the status register with the enable register causes these events to be lost. Tested on Asrock B85M Pro4, BIOSWR_STS events are now detected. Change-Id: I49abb5a4a99e943e57e0aaa6f06ff63bdf957cd3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-12sb/intel/lynxpoint: Only generate SerialIO SSDT for PCH-LPAngel Pons
Lynxpoint PCH-H does not have SerialIO, so do not generate its SSDT. Change-Id: Ie816ebd470df93a45826498bf21be59ff0a813bf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12sb/intel/lynxpoint/pch.h: Guard macro parametersAngel Pons
Guard against unintended operator precedence and associativity issues. Tested on Asrock B85M Pro4, still boots. Change-Id: I2b22af17816e5383c7eb215a773eb6750d4ed9bc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12sb/intel/common: Move named packages out of methodAngel Pons
IASL complains that creation of named objects within a method is highly inefficient. Avoid this by moving these named objects out of the method. Change-Id: Iabfb20dcb3f655658844d99ab7a3b479684d9d19 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-11sb/intel/ibexpeak: Drop Global NVS supportAngel Pons
Was copy-pasted from bd82x6x and no mainboard actually needs it. The few globals moved outside the GNVS will be removed, relocated or replaced with acpigen later. Change-Id: I590a355f1bd1e54365b2e329cfdc62384446a15c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49280 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11sb/intel/i82801jx: Drop Global NVS supportAngel Pons
Was copy-pasted from i82801ix and no mainboard actually needs it. Change-Id: I400424540b52dc5d43aba15720b18ad57ea2ebda Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49279 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11ACPI: Move PICM declarationKyösti Mälkki
Variable PICM was not inside GNVS region and can use a static initialisation value. For most AMD platforms PICM default changes from 1 to 0. Fix comments about PICM==0 used to indicate use of i8259 PIC for interrupt delivery. Change-Id: I525ef8353514ec32941c4d0c37cab38aa320cb20 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49905 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11sb,soc/intel: Drop OSYS from GNVSKyösti Mälkki
The value should be set by OSPM using some combination of _OSI() queris in the \_SB._INI() method. To maintain previous behaviour with this commit, boards where GNVS osys initialisation was removed now do the same in ASL. Change-Id: Id4957b12a72fbf7fa988e7ff039e47abcc072e1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49353 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11mainboards: Drop PWRS from GNVSKyösti Mälkki
Initialize variable to 1 to indicate AC power supply. If platform has EC it will set this correctly based on whether plugged on the charger or not. Change-Id: I3f834cf7563b9e512fcab34cdb7a27a9f0fd31c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49352 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11sb/intel/common/rtc.c: Define __SIMPLE_DEVICE__Angel Pons
Change-Id: Ie11fffdf907227ab315bfd4887aaa5de3602bd24 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-10sb/intel/bd82x6x/acpi: Convert to ASL 2.0Elyes HAOUAS
Change-Id: Ib587d7a982852e7123e43337407ef20d96811719 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-02-10nb/intel/sandybridge: Use common {DMI,EP,MCH}BAR accessorsAngel Pons
Drop unused sandybridge.h includes to avoid build failures on Ironlake. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: If2f0147fe50266e2fe2098cafdf004e51282f5e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-09sb/intel/i82801{dx,ix,jx}/lpc.c: Fix typo in commentElyes HAOUAS
Change-Id: Id7110bb2229e7c8f5f49aae40cfdf50719d0fa25 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-08soc/intel: Guard TRAP method in ASLKyösti Mälkki
Needed to support build with ACPI_SOC_NVS=n as SMIF object inside GNVS disappears then. Change-Id: Ib798187c24996b74d6345080f7d48c3f657eb512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-07sb/intel/bd82x6x: Support ME Soft Temporary Disable ModeEvgeny Zinoviev
- Add support for ME Soft Temporary Disable Mode. In this mode, ME doesn't load its kernel and freezes at Bring UP (BUP) phase. This mode is saved in ME NVRAM (and thus will remain for next reboots and poweroffs). - Add support of new CMOS option for Sandy Bridge and Ivy Bridge ThinkPads. HOW TO USE To disable ME: 1. nvramtool -w me_state=Disabled 2. reboot To enable it back: 1. nvramtool -w me_state=Normal 2. reboot To check current status: intelmetool -m Tested on ThinkPad X230 and ThinkPad X220. BACKGROUND There's no Intel documentation that would explain how this should be implemented, in public. Working binary sequence for MKHI command to put ME in Soft Temporary Disable Mode, as well as a way to bring ME out of it (by writing to H_GS register), was found and published by researchers from PT Security: 1. To disable ME, BIOS issues the disable command (before End of Post) and reboots. ME is supposed to be disabled on the next boot after DID (DRAM Init Done). My numerous tests show that issuing the command and rebooting is not enough. If we reboot too early, ME will not be disabled. Apparently, it is doing something in background after receiving the command. It works with a delay of 500-1000 ms. I also tried to dump all known (documented) registers, such as GMES and HFS, before and during the next 2 seconds after execution of the disable command to find a possible indication that something's changed in ME and we're ready to reboot. Found nothing unfortunately. 2. To enable ME back, host writes value 0x20000000 to H_GS. PT slides don't contain any more information on it, but my tests show, that after writing this value, GMES[31:28] is changing from 0x01 (BUP phase) to 0x03 (Policy Module) to 0x06 (Host Communication). Then, after some more time, fw_init_complete bit of HFS becomes 1. This means that ME starts loading its kernel immediately, without reboot. On the other hand, Lenovo BIOS clearly perform a reboot after enabling it (one reboot after saving the settings, then ThinkPad logo appears, and then one more reboot). I'm assuming we have to reset too. Change-Id: Ic01526c9731cbef4e8552bbc352133a2415787c2 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-07sb/intel: Extract `set_global_reset` functionAngel Pons
To avoid duplicating this function in ramstage, factor it out. Change-Id: I64c59a01ca153770481c28ae404a5dfe8c5382d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-07nb/intel/gm45: Factor out {DMI,EP,MCH}BAR accessorsAngel Pons
These accessors can be reused for several other northbridges. Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: Ia16ccc63dddebf938f4e9a7f5518e4d25d3e7e66 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49748 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-07sb/intel/lynxpoint/acpi/gpio.asl: Convert to ASL 2.0Elyes HAOUAS
Change-Id: I37d6cf75ee5a5cb2ff92c89178cd4469dc059403 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-06sb/intel/{bd82x6x,ibexpeak}: hide MEI if ME inoperableJames Ye
- Add Kconfig option to hide the Management Engine Interface device so the OS doesn't try to access it, if the Management Engine is in an inoperable mode, e.g. if me_cleaner is used. - Also hide the MEI if the ME is in Soft Temp Disable mode. Change-Id: Ie4a35bf5fc196e0a02b7591cdb8633d38f0c7f3e Signed-off-by: James Ye <jye836@gmail.com> Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39074 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-06intel: Define `RCBA_LENGTH` in Kconfig and use itAngel Pons
Change-Id: Ief81d49f04c1743b2a37633c4a35da9d6ddb0974 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50039 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-06sb,soc/intel: Add wake source fields in GNVSKyösti Mälkki
For the moment, these are most not used but become a necessity for a unified <soc/nvs.h> approach. They would be required for the implementation of _SWS method for OSPM to determine the reason for system waking up. The related hardware registers are present with these platforms. It's expected that ACPI power-management related GNVS entries are grouped together to form a single struct in later works. Change-Id: I6d31d39ac1017cd6fdf0ac66b418d1fbb1edf8e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50193 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-05intel: Turn `DEFAULT_RCBA` into a Kconfig symbolAngel Pons
Create `FIXED_RCBA_MMIO_BASE` and use it everywhere, except in cases where a pointer cast would be necessary. Instances in Sandy Bridge MRC code were left as-is intentionally, so as not to collide with another cleanup patch train. Tested with BUILD_TIMELESS=1, these boards remain identical: - Asus P8Z77-V LX2 - Packard Bell MS2290 Change-Id: I642958fbd6f02dbf54812d6a75d6bc3087acc77a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50036 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 13:53:05 +0000