summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/lynxpoint
AgeCommit message (Expand)Author
2014-07-12libpayload: find source of input charactersLuigi Semenzato
2014-07-11intel/lynxpoint: Allow to always route USB3 ports to XHCIStefan Reinauer
2014-07-11intel/lynxpoint: Work around XHCI resume issuesDuncan Laurie
2014-07-11intel/lynxpoint: xhci: Revert suspend/resume changesDuncan Laurie
2014-07-08southbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-05intel/lynxpoint: Build intermediate step to add Lynx Point ME imageDuncan Laurie
2014-07-05intel/lynxpoint: xhci: Port reset changes on suspend/resumeDuncan Laurie
2014-07-05intel/lynxpoint: Export pch_enable_lpc() for Super I/O systemsStefan Reinauer
2014-07-04intel/lynxpoint: Add SATA DEVSLP disable optionMarc Jones
2014-07-04intel/lynxpoint: Add CONFIG_LOCK_MANAGEMENT_ENGINE entry to KconfigDuncan Laurie
2014-07-04intel/lynxpoint: Use separate SMI callback for USB XHCI routingDuncan Laurie
2014-07-04intel/lynxpoint: Make inclusion of Intel ME optionalPaul Menzel
2014-07-04intel/lynxpoint: Allow building without IFD (descripter.bin)Paul Menzel
2014-06-25intel/lynxpoint: xhci: Update magic bits to new magic valuesDuncan Laurie
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
2014-06-20southbridge/intel/lynxpoint/me_9.x.c: Use IS_ENABLED macroEdward O'Callaghan
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
2014-04-09lynxpoint: Fix SerialIO ACPI compile issue with recent IASLDuncan Laurie
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
2014-02-12lynxpoint: Do not put SerialIO devices into D3Hot in ACPI modeDuncan Laurie
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
2013-12-21lynxpoint: XHCI: Don't put device in D3 in _PS0 MethodDuncan Laurie
2013-12-21lynxpoint: Fix an issue clearing port change status bitsDuncan Laurie
2013-12-21lynxpoint: XHCI: Advertise D3 as lowest wake stateDuncan Laurie
2013-12-21lynxpoint: Fix issues with XHCI initDuncan Laurie
2013-12-21lynxpoint: Route all USB ports to XHCI in finalize stepDuncan Laurie
2013-12-21lynxpoint: Move USB SMI sleep code to separate USB filesDuncan Laurie
2013-12-21lynxpoint: Add configuration option for SATA gen3 DTLE registersShawn Nematbakhsh
2013-12-21haswell: Misc updates from 1.6.1 ref codeDuncan Laurie
2013-12-21lynxpoint: Add devicetree config option to force enable ASPMDuncan Laurie
2013-12-21lynxpoint: me: Disable some verbose messagesDuncan Laurie
2013-12-21lynxpoint: me: Support ICC clock enables messageDuncan Laurie
2013-12-21lynxpoint: me: Allow for more than MKHI MEI messagesDuncan Laurie
2013-12-21lynxpoint: Avoid any ME device communication in S3 pathDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21lynxpoint xhci: Add ACPI D0/D3 workaroundsDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21lynxpoint: power management setup tweakDuncan Laurie
2013-12-21lynxpoint: Add LPT-LP device id and smbus_write_byteDuncan Laurie
2013-12-18lynxpoint: Don't write to non-existent EHCIDuncan Laurie
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
2013-12-05lynxpoint: Update LPT-LP PM settingsDuncan Laurie
2013-12-05lynxpoint: enable clock gatingAaron Durbin
2013-12-05lynxpoint: provide gpio_is_native()Aaron Durbin
2013-12-05lynxpoint: implement additional programming stepsStefan Reinauer
2013-12-05lynxpoint: disable pcie devices based on configAaron Durbin
2013-12-03lynxpoint: Fix LPT-LP PME_B0 bit offset in ACPI _PRW objectsDuncan Laurie
2013-12-02lynxpoint: move all pcie device handling to pcie.cAaron Durbin
2013-12-02lynxpoint: expose pch_disable_devfn()Aaron Durbin
2013-12-02lynxpoint: expose iobp functionsAaron Durbin
2013-12-01lynxpoint: Do not clear ACPI NVS region on resumeDuncan Laurie
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
2013-11-25lynxpoint: Enable USB clock gating, late setup, and sleep prepDuncan Laurie
2013-11-25lynxpoint: Add ACPI Method to enable GPIO as wake sourceDuncan Laurie
2013-11-25lynxpoint: Enable extra 16 IOAPIC entries for GPIO PIRQDuncan Laurie
2013-11-25lynxpoint: fix mem corruption during ssdt2 genAaron Durbin
2013-11-25lynxpoint: Fix XHCI controller device in ACPIDuncan Laurie
2013-11-25lynxpoint: Enable SerialIO clock in PCI modeDuncan Laurie
2013-11-25slippy: Enable EC SMIDuncan Laurie
2013-11-25lynxpoint: update azalia device idsAaron Durbin
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
2013-11-25lynxpoint: Expose ACPI Device for LP GPIO controllerDuncan Laurie
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
2013-11-25lynxpoint: Add missing ME MBP entriesDuncan Laurie
2013-11-25lynxpoint: export mem console pointer in ACPIAaron Durbin
2013-11-25lynxpoint: Updates to power management and clock gatingDuncan Laurie
2013-11-24haswell: Configure PCH power sharing for ULTDuncan Laurie
2013-11-24lynxpoint: Add a function to set an individual GPIODuncan Laurie
2013-11-24lynxpoint: Rework LP GPIO handlingDuncan Laurie
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
2013-09-06usbdebug: Fixes for LynxPoint LPKyösti Mälkki
2013-08-02Remove unnecessary space characters.Andrew Wu
2013-08-01intel/lynxpoint: remove explicit pcie config accessesKyösti Mälkki
2013-07-30Makefile: Fix adding intel/commonKyösti Mälkki
2013-07-12src/southbridge/intel/{lynxpoint,bd82x6x}/spi.c: correct spelling of attemptedPaul Menzel
2013-07-01usbdebug: Unify Intel southbridge buildsKyösti Mälkki
2013-07-01usbdebug: Drop duplicates of EHCI BAR relocation codeKyösti Mälkki
2013-06-23lynxpoint: Fix early EHCI BAR programmingKyösti Mälkki
2013-06-17Make intel blob locations configurablePatrick Georgi
2013-06-14lynxpoint: Fix PCI IDs for EHCIKyösti Mälkki
2013-06-12usbdebug: Drop printk within console_init()Kyösti Mälkki
2013-06-03Intel Lynx Point: LPC: Unify I/O APIC setupPaul Menzel
2013-05-10Drop prototype guarding for romccStefan Reinauer
2013-05-03Intel Lynx Point: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
2013-04-03lynxpoint: Cosmetic cleanupStefan Reinauer
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
2013-04-01lynxpoint: Basic configuration of SerialIO devicesDuncan Laurie
2013-04-01lynxpoint: Fix LP clock gating setup for LPCDuncan Laurie
2013-04-01lynxpoint: fix enable_pm1() functionAaron Durbin
2013-04-01lynxpoint: split clearing and enabling of smmAaron Durbin
2013-04-01lynxpoint: Rework ACPI NVS to add new SerialIO variablesDuncan Laurie
2013-03-22Fix compilation of Intel LynxPoint based boardsStefan Reinauer
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 19:19:36 +0000