summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/lynxpoint
AgeCommit message (Collapse)Author
2017-02-23lynxpoint bd82x6x: Enable PCI-to-PCI bridgeKyösti Mälkki
Once the PCI command register is written the bridge forwards future IO and memory regions, as programmed in the respective base and limit registers, to the secondary PCI bus. It was previously argumented this is copy-paste and never known to be required for these more recent platforms: https://review.coreboot.org/#/c/2706/ Change-Id: Ic8911500a30bc83587af8d4b393b66783fa52e18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18330 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20lynxpoint/broadwell: fix PCH power optimizerMatt DeVillier
Setting both bits 27 and 7 of PCH register PMSYNC_CFG (PMSYNC Configuration; offset 0x33c8) causes pre-OS display init to fail on HSW-U/Lynxpoint and BDW-U ChromeOS devices when the VBIOS/GOP driver is run after the register is set. A re-examination of Intel's reference code reveals that bit 7 should be set for the LP PCH, and bit 27 for non-LP, but not both simultaneously. The previous workaround was to disable the entire power optimizer section via a Kconfig option, which isn't ideal. Test: unset bit 27 of PMSYNC_CFG and boot google/lulu, observe functional pre-OS video output Change-Id: I446e169d23dd446710a1648f0a9b9599568b80aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18385 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20Revert "intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & Tiano"Matt DeVillier
We've been able to narrow down the problem to a single register/ single bit, so revert this commit and address the problem in a follow-on commit. This reverts commit 0f2025da0fd4dce6b951b4c4b97c9370ca7d66db. Change-Id: I780f9ea2976dd223aaa3e060aef6e1af8012c346 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18384 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06PCI ops: Define read-modify-write routines globallyKyösti Mälkki
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17690 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30sb/intel/lynxpoint: add missing I2C ACPI SSCN/FMCN methodsPrabal Saha
The SSCN and FMCN methods provide the optimal HCNT/LCNT timing values to the driver, and are necessary when using I2C devices (eg, trackpad and touchscreen) in ACPI (vs PCI) mode. Add these methods using the timing values from Broadwell, which work for Haswell/Lynxpoint as well. TEST: build google/peppy with trackpad/touchscreen devices in ACPI mode, observe proper operation under Windows [8.1/10] and Linux [Mint 18] Change-Id: I25f07ac474b041358315530e5f391bb33d9c4d04 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Prabal Saha <coolstarorganization@gmail.com>
2016-11-18sb/lynxpoint: use hda_verb.c from VARIANT_DIR if applicableMatt DeVillier
Change-Id: Ie2d0cf573876694fe87edf2f6915a5cc26238940 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07src/southbridge: Remove whitespace after sizeofElyes HAOUAS
Change-Id: Ic3b599d49a4c03ad8035c558b975f31cb91d253b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16862 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31src/southbridge: Code formatingElyes HAOUAS
Change-Id: Icfc35b73bacb60b1f21e71e70ad4418ec3e644f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16291 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-28src/southbridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I43b9b86fd51dbdc50108026099c60238f3012cbe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16290 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-02intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & TianoPrabal Saha
Without this patch, eDP output is non-functional pre-graphics driver regardless of payload (SeaBIOS, Tianocore) or video init method (VBIOS, GOP driver) and once the standard Windows Intel HD graphics driver is loaded. Test: Boot Windows on peppy and auron_paine, install Intel HD Graphics driver, observe functional eDP output with full video acceleration. Debugging method: adjust location of call to run VBIOS within coreboot, observed that eDP output functional if the VBIOS is run before the power optimizer lines, broken if run afterwards. Change-Id: I6d8252e3de396887c84533e355f41693b9ea7514 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/15261 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-15southbridge/intel/lynxpoint: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I03051c1c1df3e64abeedd6370a440111ade59742 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15676 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder, except for INTEL_LYNXPOINT_LP, which has it's own gpio code. Needs test on real hardware ! Change-Id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13615 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-26ACPI: Add hack to avoid IASL warning when reading back registersMartin Roth
Upcoming versions of IASL give a warning about unused methods. This adds an operation after the read to use the local variable and avoid the warning. The warning can be completely disabled on the command line, but as it can find real issues, my preference is to not do that. Fixes warnings: dsdt.aml 640: Store (CTMP, Local0) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: If55bb8e03abb8861e1f2f08a8bcb1be8c9783afe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-10ACPI: Fix IASL Warning about unused method for _TZ checksMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 640: If (CondRefOf (^GBUF, Local0)) { Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: Iddf46a4faab19019882847917397eee0614302b9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12695 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07timestamp: remove conditional #if CONFIG_COLLECT_TIMESTAMPSAaron Durbin
Empty functions are provided when !CONFIG_COLLECT_TIMESTAMPS so stop guarding the compilation. BUG=None BRANCH=None TEST=Built Original-Change-Id: Ib0f23e1204e048a9b928568da02e9661f6aa0a35 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228190 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9aa69fd43d77f5f7acdc9f361016c595dd16104e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I14418c8ef3ccb57ac6fce05b422e1c21b1d38392 Reviewed-on: http://review.coreboot.org/10742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-02Intel Firmware Descriptor Kconfig: remove USES_INTEL_MEMartin Roth
When I added the common IFD Kconfig and Makefile, My thinking was that I could use this symbol to differentiate between the ME and the TXE, and to exclude the ME questions from platforms that use the IFD, but don't use an ME, like Rangeley. In practice this made things a lot more complicated and isn't worth it. Change-Id: I4428744e53c6bb7fc00a4fa4f0aa782c25fc9013 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-23southbridge/intel: Create common IFD Kconfig and MakefileMartin Roth
We've got a lot of duplicated code to set up the IFD/ME/TXE/GBE/ETC. This is the start of creating a common interface for all of them. This also allows us to reduce the chipset dependencies for CBFS_SIZE. Change-Id: Iff08f74305d5ce545b5863915359eeb91eab0208 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10613 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-26acpigen: Remove all explicit length trackingVladimir Serbinenko
Change-Id: I88248d78c01b4b4e42a097889b5f4ddfdac3d966 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7367 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-053rdparty: Move to blobsPatrick Georgi
To move 3rdparty to 3rdparty/blobs (ie. below itself from git's broken perspective), we need to work around it - since some git implementations don't like the direct approach. Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-28Kconfig whitespace fixesMartin Roth
trivial whitespace fixes. Mostly changing leading spaces to tabs. Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-28intel SMI handlers: Refactor GPI SMI/SCI routingKyösti Mälkki
Move the GPI interrupt routing selection between SMI/SCI from mainboards to southbridge. There is speculation if this is all just legacy APM stuff that could be removed with a followup. Change-Id: Iab14cf347584513793f417febc47f0559e17f5a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7967 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-04-27kbuild: automatically include southbridgesStefan Reinauer
This change switches all southbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in southbridge/Makefile.inc or in southbridge/<vendor>/Makefile.inc. In order to be able to drop southbridge/amd/Makefile.inc, some scattered source files had to be moved to a southbridge/amd/common directory, in accordance to what we are doing on other architectures already. This means, vendor and southbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9796 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
The GCC 4.9.2 update showed that the boot_state_init_entry structures were being padded and assumed to be aligned in to an increased size. The bootstate scheduler for static entries, boot_state_schedule_static_entries(), was then calculating the wrong values within the array. To fix this just use a pointer to the boot_state_init_entry structure that needs to be scheduled. In addition to the previous issue noted above, the .bs_init section was sitting in the read only portion of the image while the fields within it need to be writable. Also, the boot_state_schedule_static_entries() was using symbol comparison to terminate a loop which in C can lead the compiler to always evaluate the loop at least once since the language spec indicates no 2 symbols can be the same value. Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8699 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-01-12southbridge/intel/lynxpoint/me_9.x.c: Avoid unused func warnEdward O'Callaghan
Put functions in appropriate pre-processor sections to avoid false-positive 'unused function' compiler warnings. Change-Id: Ie4955ee9df6904c38848f46226b53be37d9fa239 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8157 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-01-06southbridge: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the southbridge code to use printk() on all non-ROMCC boards. Change-Id: I312406257e66bbdc3940e206b5256460559a2c98 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8110 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06doxygen fixes: change @var to @param varMartin Roth
These files were trying to document the parameters, but didn't have the syntax quite right. Change the comments from @varname to @param varname as required by doxygen. Change-Id: I63662094d3f1686e3e35b61925b580eb06e72e28 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8100 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-05timestamps: Switch from tsc_t to uint64_tStefan Reinauer
Cherry-pick from chromium and adjusted for added boards and changed directory layout for arch/arm. Timestamp implementation for ARMv7 Abstract the use of rdtsc() and make the timestamps uint64_t in the generic code. The ARM implementation uses the monotonic timer. Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> BRANCH=none BUG=chrome-os-partner:18637 TEST=See cbmem print timestamps Original-Change-Id: Id377ba570094c44e6895ae75f8d6578c8865ea62 Original-Reviewed-on: https://gerrit.chromium.org/gerrit/63793 (cherry-picked from commit cc1a75e059020a39146e25b9198b0d58aa03924c) Change-Id: Ic51fb78ddd05ba81906d9c3b35043fa14fbbed75 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8020 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-04smihandler.c: Fix doxygen errors in southbridge_smi_handlerMartin Roth
Correct the param to match the functions. Change-Id: Id002c549a6ba6a7be4fa5eee396769eaa2510698 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8074 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-30Replace hlt() loops with halt()Patrick Georgi
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
According to spec IRQ1 isn't available for PIRQ assignment. Has gone unnoticed probably because modern OS use MSI or at least APIC and even with noapic don't use IRQ1 with PCI IRQs. Change-Id: Idc7db249007df629b27e8cae41cc80358d5306f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7478 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-11-09haswell: Move to implicit length patchingVladimir Serbinenko
Change-Id: I662ba2a08f9a176a84b8318c8004aa5db7239567 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7327 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-11-05soutbridge/*/bootblock: Use pci_dev_t over device_t typedefEdward O'Callaghan
Change-Id: I693b09d588ed6d56177cf86c23497231623b69c0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7193 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
Most of the code related to the mc146818 is not related to the RTC and is really for managing the CMOS storage. Since we intend to add a generic API for RTC drivers it's inconvenient for those functions to have an rtc_ prefix. This CL renames those functions so they start with cmos_ instead. There are some places where rtc_init was called with a comment that says something about starting the RTC. That wasn't correct before (the RTC is always running), but it looks a little odd now that the function is called cmos_init. This CL also opportunistically cleans up some style problems in this file. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/197794 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788) Removed the addition of stdint.h to mc146818rtc.h since types.h is now included. Changed rtc_init to cmos_init for fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex. Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18lynxpoint: Consolidate common GNVS initVladimir Serbinenko
Change-Id: Ie8e4fffcec308d1cd5e696605e78671f3ababf40 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-11bd82x6x, ibexpeak, lynxpoint: Declare NVSA before its use.Vladimir Serbinenko
Windows chokes if it's not the case. Change-Id: I3df15228ed00c3124b8d42fc01d7d63ff3fe07ba Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7017 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-10-10lynxpoint: Change OEM table ID for serialio.Vladimir Serbinenko
According to ACPI spec all SSDTs should have distinct OEM table ID. We end up with 2 SSDTs named "COREBOOT". Fix this. Change-Id: I01bccb72758baf51c6b4263778716f4bb9d438c9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-10bd82x6x, ibexpeak, lynxpoint: Ensure 0-filling of uninited GNVS vars.Vladimir Serbinenko
Change-Id: I672c3ca9e7f30a21330cf1920a25b1ab38b3f282 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7015 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-22haswell: Move to per-device ACPIVladimir Serbinenko
Change-Id: Ic724dcf516d9cb78e89698da603151a32d24e978 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6814 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-18lynxpoint: Don't enable SMI handling of TCODuncan Laurie
We have no good reason to be handling the TCO timeout as an SMI since we aren't doing anything special with it and clearing the status in the handler prevents the reboot from actually happening. Change-Id: I074ac0cfa7230606690e3f0e4c40ebc2a8713635 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180672 (cherry picked from commit 608a2c5768e9300c81b7c72fb8ab7a0c7c142bec) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6907 Tested-by: build bot (Jenkins)
2014-09-13azalia: Shrink boilerplateVladimir Serbinenko
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6840 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-10lynxpoint: Add interrupt for GPIO controller in ACPI deviceDuncan Laurie
The GPIO controller uses IRQ14 as an active high level triggered source for GPIOs that are configured to trigger shared interrupt. This was also tested on bolt by configuring the touchscreen to use a shared GPIO interrupt: localhost ~ $ grep atmel_mxt_ts /proc/interrupts 54: 24 188 93 124 LP-GPIO-demux atmel_mxt_ts Change-Id: I3765120112bae11407e5b2020399d0d0b8e3cef8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171901 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 63a0c80ce5a19410d0608fede5a9fe0ec1c8e5c1) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6541 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17intel/lynxpoint/Kconfig: Remove duplicate option `IFD_BIN_PATH`Paul Menzel
Currently `IFD_BIN_PATH` is shown twice. Commit 5218e616 (intel/lynxpoint: Allow building without IFD (descripter.bin)) [1] accidentally added the option another time. So fix up the commit and remove one of the two options `IFD_BIN_PATH`. Keep the one which depends on `!HAVE_IFD_BIN` and is around the IFD options. [1] http://review.coreboot.org/6046 Change-Id: Id46f01ab8ee2e752e337e687a2ef0dfa374f44a5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6269 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-07-17southbridge,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I8ef5f1571ad14ead2d4cc0d61b6b7133d7fc8550 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6293 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-12libpayload: find source of input charactersLuigi Semenzato
This change makes it possible for vboot to avoid an exploit that could cause involuntary switch to dev mode. It gives depthcharge/vboot some information on the type of input device that generated a key. BUG=chrome-os-partner:21729 TEST=manually tested for panther BRANCH=none CQ-DEPEND=CL:182420,CL:182241,CL:182946 Change-Id: I87bdac34bfc50f3adb0b35a2c57a8f95f4fbc35b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://chromium-review.googlesource.com/182357 Reviewed-by: Luigi Semenzato <semenzato@chromium.org> Tested-by: Luigi Semenzato <semenzato@chromium.org> Commit-Queue: Luigi Semenzato <semenzato@chromium.org> Reviewed-on: http://review.coreboot.org/6003 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-11intel/lynxpoint: Allow to always route USB3 ports to XHCIStefan Reinauer
This will make USB keyboards connected to USB3 ports work in libpayload on Beltino. BUG=chrome-os-partner:23396 BRANCH=none TEST=Use USB keyboard on Beltino in dev mode screen Change-Id: I70b03d733bd9e4c8be5673b48bd2196effa8a5e7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/173640 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> [pm: rebase to master branch of coreboot upstream] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6018 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-11intel/lynxpoint: Work around XHCI resume issuesDuncan Laurie
When USB3 devices are attached while in suspend, or two USB3 devices that are both plugged in are switched to the other port while in suspend the kernel does not seem to notice this -- despite the cold attach status bit. This results in the devices showing up in the USB list at the old enumerated device numbers and higher layers continuing to think they are present but not reseponding. With the kernel workaround to deal with devices that are logically disconnected it is possible for firmware to send a warm port reset to devices that are in this state and then the kernel will see them disappear and handle it properly. This same issue exists in the EFI firmware on the Whitetip Mountain 2 reference board so it is not specifically a coreboot bug. If this behavior is fixed in the kernel then this workaround could be removed since it is in RW firmware. BUG=chrome-os-partner:22818 BRANCH=falco,peppy,wolf,leon TEST=manual: 1) attach two USB3 devices 2) suspend system 3) switch the ports that the USB3 devices are attatched to 4) resume system 5) confirm that the devices are re-enumerated and come up properly Original-Change-Id: Ifba3ffc94a06dc0b2436d7d7d464d824657362af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 203d200268f4af6445224962190cbc66ad2a83e4) Change-Id: I54fd2847ee25a60f25c2cefebdc1a3c18455464a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170579 [pm: rebase to master branch of coreboot upstream] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6017 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-11intel/lynxpoint: xhci: Revert suspend/resume changesDuncan Laurie
I have been attempting to work around USB3 issues that appear in the kernel with hacks in the firmware, but this is resulting in more headaches in the kernel. Instead remove all the work that was being done at resume time and undo the change that was issuing a warm reset to all ports at suspend time. The bad device behavior will be dealt with at the kernel level to handle devices that get stuck in polling state after enable/disable sequence. BUG=chrome-os-partner:22754 BRANCH=falco,peppy,wolf,leon TEST=manual: suspend/resume with several misbehaving devices: Kingston USB3 Media Reader Transcend USB3 Media Reader Various ADATA USB3 drives Various Kingston USB3 sticks Original-Change-Id: I0894454af42d2ced456fe0da921d74c9e74902d0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170107 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c2abb4d0dad6ed00e1e230d604c4c0a76eb4eef7) Change-Id: Ib215d9c230f90a1c9f34bf29254bb9feec28c67e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170578 [pm: rebase to master branch of coreboot upstream] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-08southbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I5484ebb665453777cc3b2561be6e50c787f1a257 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6209 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-05intel/lynxpoint: Build intermediate step to add Lynx Point ME imageDuncan Laurie
This is needed to successfully build fox_wtm2 from external repo. BUG=chrome-os-partner:18638 BRANCH=none TEST=manual: successfully compile coreboot for fox_wtm2 and create an image with chromeos-bootimage/cros_bundle_firmware Change-Id: Iaa4e9983faa1d86c2b29d8fd4f577be035497e38 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48676 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4132 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05intel/lynxpoint: xhci: Port reset changes on suspend/resumeDuncan Laurie
Some USB3 devices are not showing up after suspend/resume cycles. In particular if a device uses a lower power state like U2 it may take longer to come up and the firmware needs to wait after sending a warm port reset. In addition skipping port reset to connected ports in the way into suspend was causing problems so instead send all ports a reset before suspend. BUG=chrome-os-partner:22402 BRANCH=falco,peppy,leon,wolf TEST=manual: Suspend/resume with ADATA HE720 HDD (and other devices) both connected at suspend and connecting while in suspend and ensure that the devices always show up in the kernel. Change-Id: Ib7b15dc65792742b4ceb7dcfc4b2c83192eafcc2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169548 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6015 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05intel/lynxpoint: Export pch_enable_lpc() for Super I/O systemsStefan Reinauer
In order to enable a Super I/O in non Chrome EC systems we need to make pch_enable_lpc() available to the mainboard romstage.c BUG=none BRANCH=none TEST=boot ChromeOS on Beltino Change-Id: I34e7d23012e1852c69e82ba7cdc81a05751846de Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172180 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/6019 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-04intel/lynxpoint: Add SATA DEVSLP disable optionMarc Jones
Add the chip option to disable SATA DEVSLP. This disables the SDS bit in the SATA CAP2 register. BUG=chrome-os-partner:23186 BRANCH=leon TEST=Manual: System runs without SATA failure for more than 10 hours Original-Change-Id: I8baa40935421769aeee341a78441fb19ecaa3206 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: https://chromium-review.googlesource.com/174648 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 49d25812b04a983d687a53a39530559ba99fd9b4) Change-Id: Iac0b32f80958f5ffb571733484dc931bee216f55 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: https://chromium-review.googlesource.com/176352 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/6013 Tested-by: build bot (Jenkins)
2014-07-04intel/lynxpoint: Add CONFIG_LOCK_MANAGEMENT_ENGINE entry to KconfigDuncan Laurie
This was missing from lynxpoint. BUG=chrome-os-partner:21796 BRANCH=falco,peppy TEST=emerge-falco chromeos-coreboot-falco Change-Id: Id1b261a5310ce1482f11c8c032c13f49046742fc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66669 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6012 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-04intel/lynxpoint: Use separate SMI callback for USB XHCI routingDuncan Laurie
This will allow the legacy mode boot path to leave USB ports routed to EHCI so they can be used by SeaBIOS. BUG=chrome-os-partner:22085 BRANCH=falco,peppy TEST=manual: Build and boot from USB and SeaBIOS on falco Change-Id: I46870eccd1b846dc8a7f8d7948969c8e623e18cd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66547 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6011 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-04intel/lynxpoint: Make inclusion of Intel ME optionalPaul Menzel
Current build configuration always wants to include an Intel Management Engine (ME) firmware (`me.bin`) on Intel Lynx Point systems. However, we can have a working coreboot without it, as long as the factory delivered ME firmware is kept untouched in the flash ROM. So let the user decide if a ME firmware will be included in the build by introducing the Kconfig option `HAVE_ME_BIN`. The same was done in commit 99fd30e4 (sandybridge: Make inclusion of me.bin optional) [1] for Intel Sandy Bridge (BD82x6x). [1] http://review.coreboot.org/3522 Change-Id: I7c6048fd0f56288769ad90acbfb67b908ac8d824 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6047 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-04intel/lynxpoint: Allow building without IFD (descripter.bin)Paul Menzel
On newer Intel systems, like Intel Lynx Point, the flash ROM is shared between the host processor (BIOS), its Management Engine (ME) and an integrated Ethernet controller (GbE). The layout of the flash ROM (and other information) is kept in the so called Intel Firmware Descriptor (IFD). If we only want to build coreboot to update the BIOS section, all we need is the flash layout. So add the option to specify the flash layout in the mainboard’s Kconfig, and thus, to build without the real IFD. However, with such a build, one has to make sure that the IFD section on the flash ROM will not be written over (nor any other section that has not been included by coreboot). A patch to write selected sections of a flash ROM with IFD has been sent to the flashrom mailing list [2]. The same was done in commit a15cd66b [1] (sandybridge: Make build possible without descriptor.bin) for Intel Sandy Bridge (BD82x6x). [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html [PATCH] Add option to read ROM layout from IFD [2] http://review.coreboot.org/3524 Change-Id: I26a604446cdf37a6bbcee2b14a107b7ccf417d5c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6046 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-25intel/lynxpoint: xhci: Update magic bits to new magic valuesDuncan Laurie
BUG=chrome-os-partner:22254 BRANCH=falco TEST=emerge-falco chromeos-coreboot-falco Original-Change-Id: I493a8cbbfdd958b855f6b4c01e03ee524be74c6e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167050 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 226a66772768bf3c2f69e585984e52c0c270821f) Change-Id: I800b02b511f9d188dd7a8e8d83139a8181346916 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167312 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6014 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Icab0aeb2d5bf19b4029ca29b8a1e7564ef59a538 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6071 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-20southbridge/intel/lynxpoint/me_9.x.c: Use IS_ENABLED macroEdward O'Callaghan
Silence unused function warnings, spotted by Clang. Change-Id: I5127893e9605ca490ff450faa92af5e9eafe8940 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6054 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM. Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6032 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-04-09lynxpoint: Fix SerialIO ACPI compile issue with recent IASLDuncan Laurie
The SerialIO DwordIo() definition is fixed up before returning it in the serialio device _CRS method, so the values that are set in the raw ASL are not actually used. However modern versions of IASL do not like that the RangeLength is set to zero and will fail to compile. Set this value to 1 to make IASL stop complaining, but the real value is still fixed up in _CRS so this has no real effect on the end result. Change-Id: Iceb888e54dd4d627c12d078915108a11f45b1a2d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
SPI registers didnt change since ICH8. No need to have separate files for them. Unify. Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5254 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
With generic load using 32-bit accesses this is no longer has a huge impact it previously did. It's also unnecessarily component-speficific. Change-Id: I7e8a74ea1ceaa225e1024f9eb43e7280773e2b5a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5131 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
The Chrome OS environment sends an SMI to finalize the chipset/board at the end of the "depthcharge" payload, but there is no facility to send this command if not using the full ChromeOS firmware stack. This commit adds a callback before booting the payload that will issue this SMI which will lock down the chipset and route USB devices to the XHCI controller. Change-Id: I2db9c44d61ebf8fa28a8a2b260a63d4aa4d75842 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5181 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
Read this variable from PCI configuration capabilities list instead. Change-Id: I0cfe981833873397c32cd3aa2af307f35f01784b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-12lynxpoint: Do not put SerialIO devices into D3Hot in ACPI modeDuncan Laurie
Remove the bit of code that was putting the SerialIO devices into D3Hot state when they are switched from PCI to ACPI mode. Instead, add the appropriate ACPI Methods to allow the kernel to control the power state of the device. The problem seems to be that if the device is put in D3Hot state before it is switched from PCI to ACPI mode then it does not properly export its PCI configuration space and cannot be woken back up. Adding the ACPI Methods for _PS0/_PS3 allows the kernel to transition the device into D0 state only when it is necessary to communicate with the device, then put it back into D3Hot state. Change-Id: I2384ba10bf47750d1c1a35216169ddeee26881df Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5193 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
Number one reason to use cbfs_get_file was to get file length. With previous patch no more need for this. Change-Id: I330dda914d800c991757c5967b11963276ba9e00 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4674 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
THis reduces risks of bufer overflows. Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4279 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-21lynxpoint: XHCI: Don't put device in D3 in _PS0 MethodDuncan Laurie
The end of the _PS0 method that is supposed to transition the XHCI device to D0 state is instead putting it in D3 state. This triggers a PME_B0 GPE which causes a Notify to the XHCI ACPI Device in the kernel and that increments the wakeup counter and causes aborted suspends. Instead if we just leave the device in D0 where it should be after executing this function then the PME_B0 is not generated and the kernel does not see a wakeup on XHCI. Similarly I changed the _PS3 method to always put the device in D3 at the end of the method, rather than depending on the state to be D3 at the start. Before this change the kernel would see the following sequence when trying to suspend when the XHCI controller is in D3cold: kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff88017802bf28) kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [XHCI] (Device) Value 0x02 (Device Wake) Node ffff88017802bc30 kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [EHCI] (Device) Value 0x02 (Device Wake) Node ffff88017802b8e8 kernel: evmisc-0169 [07] ev_queue_notify_reques: Dispatching Notify on [HDEF] (Device) Value 0x02 (Device Wake) Node ffff88017802b1b8 kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 kernel: xhci_hcd 0000:00:14.0: PME# disabled kernel: xhci_hcd 0000:00:14.0: enabling bus mastering kernel: xhci_hcd 0000:00:14.0: setting latency timer to 64 kernel: PM: Wakeup pending, aborting suspend kernel: last active wakeup source: 0000:00:14.0 Now it does not get a notification (due to PME_B0) when going to D0 on the way into suspend. XHCI goes from D3cold to D0 (in order to be able to read mmio) and then back to D3hot before suspend. kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff88017802bf28) kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 kernel: xhci_hcd 0000:00:14.0: PME# disabled kernel: xhci_hcd 0000:00:14.0: enabling bus mastering kernel: xhci_hcd 0000:00:14.0: setting latency timer to 64 kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._S3D] (Node ffff88017802c000) kernel: xhci_hcd 0000:00:14.0: PME# enabled kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS3] (Node ffff88017802bf50) kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot Change-Id: Id5cd28eede2b27d97640047feb17349ae4ab79b7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65236 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4448 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Fix an issue clearing port change status bitsDuncan Laurie
The coreboot and ACPI code that clears USB3 PORTSC change status bits was not properly preserving the state of the PED (port enabled or disabled) status bit, and it could write 0 back to this field which would disable the port. Additionally add back the code that resets disconnected USB3 ports on the way into suspend (as stated in the BWG) but take care to clear the PME status bit so we don't immediately wake. suspend/resume with USB3 devices 1) suspend with no devices, plug in while suspended, then resume and verify that the devices are detected 2) suspend with USB3 devices inserted, then suspend and resume and verify that the devices are detected 3) suspend with USB3 devices inserted, then remove the devices while suspended, resume and ensure they can be detected again when inserted after resume Change-Id: Ic7e8d375dfe645cf0dc1f041c3a3d09d0ead1a51 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65733 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4473 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: XHCI: Advertise D3 as lowest wake stateDuncan Laurie
The recommended value in docs is D2, but lynxpoint XHCI does not even support D2 state which causes the kernel to think this device cannot be used as a wake source: kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI kernel: ACPI: Device does not support D2 kernel: xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI Additionally this means the kernel will never put the device into D3 state by itself. There is SMI code that will put the device into D3 before suspend so advertising D3 here should be correct. With this change the kernel will put the controller into D3 on suspend and back to D0 on resume, including executing the ACPI methods for _PS0/_PS3 that contain chipset specific workarounds. In addition add a _PSC method to directly return the D state from the device registers. With ALL USB devices removed the XHCI controller goes into D3 state and the kernel can have a hard time determining the state of the device at boot. A kernel compiled with CONFIG_ACPI_DEBUG=y and module parameters acpi.debug_layer=0x7f acpi.debug_level=0x2f can be used to see what ACPI methods are executed: kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS3] (Node ffff8801000a7f50) kernel: ACPI: Preparing to enter system sleep state S3 ... kernel: ACPI: Waking up from system sleep state S3 kernel: ACPI: Execute Method [\_SB_.PCI0.XHCI._PS0] (Node ffff8801000a7f28) kernel: xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 Change-Id: Ic64040eb4dd1947a1e2f0ee253a64be683e0ec70 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> meld with s3d Change-Id: Ic6789720c4efe661dcb03a4afce8d88115854472 Reviewed-on: https://gerrit.chromium.org/gerrit/63916 Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4409 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Fix issues with XHCI initDuncan Laurie
- Put the device into D0 and not D3 so memory bar is available and the subsequent commands actually do something useful - Remove set of 818Ch[7:0]=FFh (gone in ref code) - Fix reg 0x40/0x44 mixup Verify that expected bits are set: localhost ~ # pci_read32 0 0x14 0 0x10 0xe0500004 localhost ~ # mmio_read32 0xe0508144 0x000003ff localhost ~ # mmio_read32 0xe050816c 0x000f0038 Change-Id: I388398e8c7d11e538ca18dab55d8bbd9b88f17df Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63801 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4408 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Route all USB ports to XHCI in finalize stepDuncan Laurie
This commit adds a new Kconfig option for the LynxPoint southbridge that will have coreboot route all of the USB ports to the XHCI controller in the finalize step (i.e. after the bootloader) and disable the EHCI controller(s). Additionally when doing this the XHCI USB3 ports need to be put into an expected state on resume in order to make the kernel state machine happy. Part of this could also be done in depthcharge but there are also some resume-time steps required so it makes sense to keep it all together in coreboot. This can theoretically save ~100mW at runtime. Verify that the EHCI controller is not found in Linux and that booting from USB still works. Change-Id: I3ddfecc0ab12a4302e6034ea8d13ccd8ea2a655d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63802 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4407 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Move USB SMI sleep code to separate USB filesDuncan Laurie
Move this to the existing USB source files so they can share some helper functions and keep the main smihandler code cleaner. The XHCI sleep prepare code now implements the actual sleep preparation steps from the ref code instead of the docs. Change-Id: Ic90adbdaba947a6b53824e548c785b4fb3990ab5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63800 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4406 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Add configuration option for SATA gen3 DTLE registersShawn Nematbakhsh
Allow DTLE DATA / EDGE registers to be configured in board-specific devicetree. Change-Id: I82307d08c9cf73461db3ac7fb875a4fe70d6f9ea Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65716 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4475 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21haswell: Misc updates from 1.6.1 ref codeDuncan Laurie
These programming sequences were changed in the latest code. Change-Id: Ia4b763a49542635713d11a9ee81f7e7f200bf841 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65612 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4466 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Add devicetree config option to force enable ASPMDuncan Laurie
The PCIe root port has ASPM settings/workarounds that are only applied based on the value of an undocumented bit in PCI config register 0x32C. If that bit is not set for some reason then the settings are not applied. This devicetree config option will force the ASPM settings for each port based on the bit map. Change-Id: I40b08ca9a0ef52742609bac72fb821454a373799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65314 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4453 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: me: Disable some verbose messagesDuncan Laurie
The default ME output is quite verbose and not all that useful unless you are actively debugging the ME and then you can enable the CONFIG_DEBUG_INTEL_ME option. This commit silences the firmware capabilities and the MBP output. Change-Id: I2b8abcb34ae0d00d9a38d029979e84ee0d0ca287 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65252 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4452 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: me: Support ICC clock enables messageDuncan Laurie
This message allows unused clocks to be disabled based on a devicetree setting in each mainboard. Change-Id: Ib1988cab3748490cf24028752562c64ccbce2054 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65250 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4450 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: me: Allow for more than MKHI MEI messagesDuncan Laurie
The original ME code was assuming that the only type of messages it would send were MKHI type and so it had some embedded checks for that header and that type of message. In order to support ICC messages this needs to change to handle different header types, so now the header will be sent first and then the data will follow, rather than the two both being sent in the same low-level function. This change has no real affect on the system, subsequent commit will add new ICC messages. Change-Id: I52848581e49b88c0a79e8bb6bda2a179419808a3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65249 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4449 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint: Avoid any ME device communication in S3 pathDuncan Laurie
The management engine is occasionally hanging the system on resume when it is accessed. Since we actually don't need to do anything with it on resume it can be disabled early in the resume path and avoid assigning resources just to remove them later. suspend/resume on falco and check /sys/firmware/log to ensure that device 00:16.0 is disabled early and that no resources are probed or assigned and that the device init path does not execute. Change-Id: I35573681e3a1d43d816d24954842cbe9c61f3484 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4376 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
The management engine is slow, requiring at least 500ms between when the Dram Init Done message is sent (right after memory training) to when the MBP will report that it is successfully cleared and that the ME can finally be sent the EOP message. Currently this is adding 100-150ms to the boot time. If we defer waiting for the MBP Clear indicator until the finalize step we can gain back that lost time. boot on falco with SMI debugging enabled to ensure that the ME is locked down in the finalize step: Finalizing Coreboot SMI# #0 SMI_STS: PM1 APM ME: MBP cleared ME: mkhi_end_of_post ME: END OF POST message successful (0) Change-Id: Icab4c8c8e00eea67bed5e8154d91a1eb48a492d1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62633 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4375 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint xhci: Add ACPI D0/D3 workaroundsDuncan Laurie
There are specific programming requirements for the usb3 ports on all LynxPoint chipsets when transitioning to D0 or D3. LynxPoint-LP has additional workaround steps needed involving resetting the disconnected ports when transitioning to D0. The workarounds are implemented in ACPI code so the controller can transition properly into D3 at runtime. Change-Id: I3b428562f48c9cb250b97779a3b2753ed4f81509 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62632 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4374 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 12:42:28 +0000