summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/lynxpoint/Makefile.inc
AgeCommit message (Collapse)Author
2017-09-20southbridge/intel/lynxpoint: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I368c31b9935c0fa9e8a1be416435dd76f44ec1ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-18sb/lynxpoint: use hda_verb.c from VARIANT_DIR if applicableMatt DeVillier
Change-Id: Ie2d0cf573876694fe87edf2f6915a5cc26238940 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder, except for INTEL_LYNXPOINT_LP, which has it's own gpio code. Needs test on real hardware ! Change-Id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13615 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23southbridge/intel: Create common IFD Kconfig and MakefileMartin Roth
We've got a lot of duplicated code to set up the IFD/ME/TXE/GBE/ETC. This is the start of creating a common interface for all of them. This also allows us to reduce the chipset dependencies for CBFS_SIZE. Change-Id: Iff08f74305d5ce545b5863915359eeb91eab0208 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10613 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-27kbuild: automatically include southbridgesStefan Reinauer
This change switches all southbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in southbridge/Makefile.inc or in southbridge/<vendor>/Makefile.inc. In order to be able to drop southbridge/amd/Makefile.inc, some scattered source files had to be moved to a southbridge/amd/common directory, in accordance to what we are doing on other architectures already. This means, vendor and southbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9796 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-13azalia: Shrink boilerplateVladimir Serbinenko
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6840 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-05intel/lynxpoint: Build intermediate step to add Lynx Point ME imageDuncan Laurie
This is needed to successfully build fox_wtm2 from external repo. BUG=chrome-os-partner:18638 BRANCH=none TEST=manual: successfully compile coreboot for fox_wtm2 and create an image with chromeos-bootimage/cros_bundle_firmware Change-Id: Iaa4e9983faa1d86c2b29d8fd4f577be035497e38 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48676 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4132 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-04intel/lynxpoint: Make inclusion of Intel ME optionalPaul Menzel
Current build configuration always wants to include an Intel Management Engine (ME) firmware (`me.bin`) on Intel Lynx Point systems. However, we can have a working coreboot without it, as long as the factory delivered ME firmware is kept untouched in the flash ROM. So let the user decide if a ME firmware will be included in the build by introducing the Kconfig option `HAVE_ME_BIN`. The same was done in commit 99fd30e4 (sandybridge: Make inclusion of me.bin optional) [1] for Intel Sandy Bridge (BD82x6x). [1] http://review.coreboot.org/3522 Change-Id: I7c6048fd0f56288769ad90acbfb67b908ac8d824 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6047 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-04intel/lynxpoint: Allow building without IFD (descripter.bin)Paul Menzel
On newer Intel systems, like Intel Lynx Point, the flash ROM is shared between the host processor (BIOS), its Management Engine (ME) and an integrated Ethernet controller (GbE). The layout of the flash ROM (and other information) is kept in the so called Intel Firmware Descriptor (IFD). If we only want to build coreboot to update the BIOS section, all we need is the flash layout. So add the option to specify the flash layout in the mainboard’s Kconfig, and thus, to build without the real IFD. However, with such a build, one has to make sure that the IFD section on the flash ROM will not be written over (nor any other section that has not been included by coreboot). A patch to write selected sections of a flash ROM with IFD has been sent to the flashrom mailing list [2]. The same was done in commit a15cd66b [1] (sandybridge: Make build possible without descriptor.bin) for Intel Sandy Bridge (BD82x6x). [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html [PATCH] Add option to read ROM layout from IFD [2] http://review.coreboot.org/3524 Change-Id: I26a604446cdf37a6bbcee2b14a107b7ccf417d5c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6046 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
SPI registers didnt change since ICH8. No need to have separate files for them. Unify. Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5254 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
With generic load using 32-bit accesses this is no longer has a huge impact it previously did. It's also unnecessarily component-speficific. Change-Id: I7e8a74ea1ceaa225e1024f9eb43e7280773e2b5a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5131 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-12-21lynxpoint: Move USB SMI sleep code to separate USB filesDuncan Laurie
Move this to the existing USB source files so they can share some helper functions and keep the main smihandler code cleaner. The XHCI sleep prepare code now implements the actual sleep preparation steps from the ref code instead of the docs. Change-Id: Ic90adbdaba947a6b53824e548c785b4fb3990ab5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63800 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4406 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
This reverts commit ff81f50f0e4c068b64c4a5c7f5244196ecd24965. Deferring this step until the finalize stage will allow us to defer waiting for the MBP clear indicator and speeding up the boot. Change-Id: Ib8edffd06689e72875830cd68b5aedb7ac3b0559 Reviewed-on: https://gerrit.chromium.org/gerrit/62631 Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4373 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0 which uses the same verb table init sequence as the southbridge. In order to avoid two copies of the verb table loading code I separated out the HDA verb table functions into a file that can be re-used and then added a minihd driver to the haswell northbridge. The minihd verb table is the same across devices so it can live within the minihd driver rather than needing to be specified in each separate mainboard. I also fixed up the driver for lynxpoint HDA by following the reference code. Without HDMI cable plugged in driver does not find any codec, and it does not seem to re-probe when HDMI is connected. We may be missing kernel patches for this. hda-intel 0000:00:03.0: no codecs found! With a basic kernel patch to add 0x0a0c device ID to HDA driver and with HDMI cable connected it is much happier: snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
To save power, disable audio codec in S3 + S5. Also, refactor Lynxpoint GPIO code slightly to allow usage in SMM binary. Change-Id: I55c4248c89a258b5e4cecf8579eb58f1c15430c0 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60950 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4339 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25lynxpoint: Enable USB clock gating, late setup, and sleep prepDuncan Laurie
Both EHCI and XHCI controllers have additional setup steps that are not part of the PEI reference code so they need to be done later. Both controllers also have specific clock gating setup requirements that are now implemented. Additionally they both have specific requirements when entering sleep states. XHCI needs something in S3/S4/S5 and EHCI only has steps for S4/S5 entry. Change-Id: Ic62cbc8b6255455e56b72dd5d52e27a311999330 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57033 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4217 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
Now that we have RW ramstage we don't need to have the management engine lock down step done in a final SMM. ME: mkhi_end_of_post ME: END OF POST message successful (0) PCI: 00:16.0: Disabling device Change-Id: I9db4e72e38be58cc875c1622a966d8fcacc83280 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49757 Reviewed-on: http://review.coreboot.org/4153 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-01usbdebug: Unify Intel southbridge buildsKyösti Mälkki
EHCI controller enable is identical on the affected chipsets. Change-Id: I91830b6f5144a70b158ec1ee40e9cba5fab3fbc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3424 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17Make intel blob locations configurablePatrick Georgi
They were hard-coded to be copied from 3rdparty/ which isn't always the right choice. Since the defaults stay the same, this should be compatible. Change-Id: If2173bef86ad1fcf2335e13472ea8ca41eb41f3d Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-01lynxpoint: Basic configuration of SerialIO devicesDuncan Laurie
This adds configuration of SerialIO devices in the Lynxpoint-LP chipset. This includes DMA, I2C, SPI, UART, and SDIO controllers. There is assorted magic setup necessary for the devices and while it is similar for each device there are subtle differences in some register settings. These devices must be put into "ACPI Mode" in order to take advantage of S0ix. When in ACPI mode the allocated PCI BARs must be passed to ACPI so it can be relayed to the OS. When the devices are in ACPI mode BAR0+BAR1 is saved into ACPI NVS and then updated and returned when the OS calls _CRS. Note that is is not entirely complete yet. We need to update the IASL compiler in our build environment to support ACPI 5.0 in order to be able to pass the FixedDMA entries to the kernel. There are also no ACPI methods defined yet to do D0->D3->D0 transitions for actually entering/exiting S0ix states. This is hard to test right now because our kernel does not support any of these devices in ACPI mode. I was able to build and test the upstream bleeding-edge branch of the linux-pm git tree. With that tree I was able to enumerate and load the driver for the DesignWare I2C driver and attempt to probe the I2C bus -- although there are no devices attatched. I am also able to see the resources from ACPI in /proc/iomem get reserved properly in the kernel. Change-Id: Ie311addd6a25f3b7edf3388fe68c1cd691a0a500 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2971 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-21lynxpoint: Add power management helper functionsDuncan Laurie
There are subtle yet significant differences in some of the registers in the power management region between LynxPoint-H and LynxPoint-LP. In order to reduce code that is accessing these registers and would need special cases this adds a number of helper functions that can be used in both ramstage and SMM. This commit just adds the new functions, subsequent commits will start to use them. Change-Id: I411da75da519f5b3198a408078cbf3114e426992 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2813 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-21lynxpoint: Add function for checking for LP chipsetDuncan Laurie
Add a helper function pch_is_lp() that will return 1 if the current chipset is of the new "low power" variant used with Haswell ULT. Additionally these functions are added to SMM so it can be used there. Change-Id: I9acdea2c56076cd8d9627aba66cf0844c56a38fb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2811 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-21LynxPoint: Move RCBA helper function to its own fileDuncan Laurie
So it can get used in both romstage and ramstage. Change-Id: Ief9eaafdd91df2a7b668de1a9b83aea3af3ff894 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2802 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-19lynxpoint: Add cbfs_load_payload() implementationAaron Durbin
SPI accesses can be slow depending on the setup and the access pattern. The current SPI hardware setup to cache and prefetch. The alternative cbfs_load_payload() function takes advantage of the caching in the CPU because the ROM is cached as write protected as well as the SPI's hardware's caching/prefetching implementation. The CPU will fetch consecutive aligned cachelines which will hit the ROM as cacheline-aligned addresses. Once the payload is mirrored into RAM the segment loading can take place by reading RAM instead of ROM. With the alternative cbfs_load_payload() the boot time on a baskingridge board saves ~100ms. This savings is observed using cbmem.py after performing warm reboots and looking at TS_SELFBOOT_JUMP (99) entries. This is booting with a depthcharge payload whose payload file fits within the SMM_DEFAULT_SIZE (0x10000 bytes). Datapoints with TS_LOAD_PAYLOAD (90) & TS_SELFBOOT_JUMP (99) cbmem entries: Baseline Alt -------- -------- 90:3,859,310 (473) 90:3,863,647 (454) 99:3,989,578 (130,268) 99:3,888,709 (25,062) 90:3,899,450 (477) 90:3,860,926 (463) 99:4,029,459 (130,008) 99:3,890,583 (29,657) 90:3,834,600 (466) 90:3,890,564 (465) 99:3,964,535 (129,934) 99:3,920,213 (29,649) Booted baskingridge many times and observed 100ms reduction in TS_SELFBOOT_JUMP times (time to load payload). Change-Id: I27b2dec59ecd469a4906b4179b39928e9201db81 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2783 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17haswell platforms: restructure romstage mainAaron Durbin
There was a mix of setup code sprinkled across the various components: southbridge code in the northbridge, etc. This commit reorganizes the code so that northbridge code doesn't initialize southbridge components. Additionally, the calling dram initialization no longer calls out to ME code. The main() function in the mainboard calls the necessary ME functions before and after dram initialization. The biggest change is the addition of an early_pch_init() function which initializes the BARs, GPIOs, and RCBA configuration. It is also responsible for reporting back to the caller if the board is being woken up from S3. The one sequence difference is that the RCBA config is performed before claling the reference code. Lastly the rcba configuration was changed to be table driven so that different board/configurations can use the same code. It should be possible to have board/configuration specific gpio and rcba configuration while reusing the romstage code. Change-Id: I830e41b426261dd686a2701ce054fc39f296dffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2681 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14lynxpoint: Add new GPIO interface for Lynxpoint-LPDuncan Laurie
The low power variant of the chipset introduces a completely new interface to the GPIOs. This is a 1KB region and so needs to be moved as well so it does not conflict with other IO regions. Also expose the gpio_get functions to ramstage and move the prototypes to pch.h so they can be used for both GPIO interfaces. Change-Id: I20bc18669525af16de8cdf99f0ccfa9612be63ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2648 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore, the southbridge support is included as well. The basis for this code is the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires more attention, but this is a good starting point. This code partially gets up through the romstage just before training memory on a Haswell reference board. Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2616 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 13:07:18 +0000