coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2013-09-06	usbdebug: Fixes for LynxPoint LP	Kyösti Mälkki
	Keep the EHCI BAR unchanged to keep usbdebug working. Change-Id: I7fe0eed24a66cb5058b49ee3fc0350d91089ed7a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3477 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-30	Makefile: Fix adding intel/common	Kyösti Mälkki
	Directory intel/common must be conditionally added in the list of source directories, as the parent directory southbridge/intel is unconditionally added even for boards without such device. Change-Id: I7088bc6db9f56909ffa996aa7eff76cd72e177eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3827 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-17	Make intel blob locations configurable	Patrick Georgi
	They were hard-coded to be copied from 3rdparty/ which isn't always the right choice. Since the defaults stay the same, this should be compatible. Change-Id: If2173bef86ad1fcf2335e13472ea8ca41eb41f3d Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-19	lynxpoint: Add cbfs_load_payload() implementation	Aaron Durbin
	SPI accesses can be slow depending on the setup and the access pattern. The current SPI hardware setup to cache and prefetch. The alternative cbfs_load_payload() function takes advantage of the caching in the CPU because the ROM is cached as write protected as well as the SPI's hardware's caching/prefetching implementation. The CPU will fetch consecutive aligned cachelines which will hit the ROM as cacheline-aligned addresses. Once the payload is mirrored into RAM the segment loading can take place by reading RAM instead of ROM. With the alternative cbfs_load_payload() the boot time on a baskingridge board saves ~100ms. This savings is observed using cbmem.py after performing warm reboots and looking at TS_SELFBOOT_JUMP (99) entries. This is booting with a depthcharge payload whose payload file fits within the SMM_DEFAULT_SIZE (0x10000 bytes). Datapoints with TS_LOAD_PAYLOAD (90) & TS_SELFBOOT_JUMP (99) cbmem entries: Baseline Alt -------- -------- 90:3,859,310 (473) 90:3,863,647 (454) 99:3,989,578 (130,268) 99:3,888,709 (25,062) 90:3,899,450 (477) 90:3,860,926 (463) 99:4,029,459 (130,008) 99:3,890,583 (29,657) 90:3,834,600 (466) 90:3,890,564 (465) 99:3,964,535 (129,934) 99:3,920,213 (29,649) Booted baskingridge many times and observed 100ms reduction in TS_SELFBOOT_JUMP times (time to load payload). Change-Id: I27b2dec59ecd469a4906b4179b39928e9201db81 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2783 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-14	lynxpoint: Add Kconfig entry for Low Power chipset	Duncan Laurie
	There are enough subtle differences that it is useful to have a Kconfig entry to differentiate the ULT/LP chipet from the desktop/mobile versions. Change-Id: I04ca1bc6f90bcf9e6994ea7125c98347e8def898 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2645 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-14	haswell: Add initial support for Haswell platforms	Aaron Durbin
	The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore, the southbridge support is included as well. The basis for this code is the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires more attention, but this is a good starting point. This code partially gets up through the romstage just before training memory on a Haswell reference board. Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2616 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>