summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801jx/fadt.c
AgeCommit message (Collapse)Author
2021-08-19acpi: Fill fadt->century based on KconfigNico Huber
Change-Id: I916f19e022633b316fbc0c6bf38bbd58228412be Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25sb,soc/intel: Remove no-op APMC for C-state and P-stateKyösti Mälkki
Change-Id: I3c1aa7f68eb03f04ddb9c1a5e960e3e2050a029c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49250 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22sb/intel/i82801jx: Drop `docking_supported`Angel Pons
The three mainboards using this southbridge are desktop boards, which are not dockable. The Dell Precision M6400 laptop is dockable, but even though it has an Eaglelake MCH, it uses an i82801ix southbridge instead. So, one could still port that laptop to coreboot after this change! :P Also, drop the now-unnecessary `chip` and `dev` variables. Change-Id: Ic9ab497c91d66032929190cde22d59a208887f50 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801jx: Drop `c3_latency`Angel Pons
The three mainboards using this southbridge do not define it. Note that the default value of zero might be wrong, so add a FIXME comment. Change-Id: Id16bb12a4628daf311bddf7e4701fc480d6b18e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20src: Report word-sized access for PM1a_EVTAngel Pons
According to the ACPI specification, version 6.3: Accesses to the PM1 status registers are done through byte or word accesses. The same is said about the PM1 Enable registers. Therefore, reporting dword-sized access is wrong and means nothing anyway. Since some other platforms use word-sized access, use word everywhere for consistency. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: I6f85c9a4126f37ab2a193c3ab50a6c8e62cf6515 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43432 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Make HAVE_CF9_RESET set the FADT reset registerAngel Pons
All supported x86 chips select HAVE_CF9_RESET, and also use 0xcf9 as reset register in FADT. How unsurprising. We might as well use that information to automatically fill in the FADT accordingly. So, do it. To avoid having x86-specific code under arch-agnostic `acpi/`, create a new optional `arch_fill_fadt` function, and override it for x86 systems. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Ib436b04aafd66c3ddfa205b870c1e95afb3e846d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-07-20src: Drop useless cache flush settings in FADTAngel Pons
They are ignored if the ACPI_FADT_WBINVD flag is set, which is required on current ACPI versions and only maintained for ACPI 1.0 compatibility. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Ief1219542ba71d18153b64180e0ff60bd1e7687b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-20src: Never overwrite `fadt->flags`Angel Pons
Instead, just flip the desired bits using bitwise operations. As this is initially zero, the resulting value is the same. This allows flags to be set from anywhere regardless of execution order. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Icfd580a20524936cd0adac574331b09fb2aea925 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43387 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless PM1b settings from FADTAngel Pons
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event register blocks. According to the ACPI specification, version 6.3, sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers): If the PM1b_EVT_BLK is not supported, its pointer contains a value of zero in the FADT. If the PM1b_CNT_BLK is not supported, its pointer contains a value of zero in the FADT. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with PM1b for now. So, drop unneeded writes to PM1b fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless GPE1 settings from FADTAngel Pons
None of the currently-supported chips has a GPE1 block. The ACPI spec, version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says: If a generic register block is not supported then its respective block pointer and block length values in the FADT table contain zeros. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <string.h>'Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/) |grep -v vendorcode |grep '<' Change-Id: I12802d0a6254b2fa39d59f485008bb2012f7b32d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41913 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801jx: Drop `p_cnt_throttling_supported`Angel Pons
The three mainboards using this southbridge do not support it. Change-Id: I006f1ec26c40f7e2dfc2ddedb017278455368bb9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42655 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801jx/fadt.c: Use pmutil.h definitionsAngel Pons
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical. Change-Id: I572a9da0cba5d23c48c4cb06de4bb75f65f5b0b0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2020-06-27sb/intel/i82801jx/fadt.c: Align with i82801ixAngel Pons
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical. Change-Id: I13b972440459a62777ee2a4688d1d8af147d8921 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-27sb/intel/i82801jx/fadt.c: Reorder statementsAngel Pons
Change the order of the assignments to match that of i82801ix. This changes the binary but the effective result should be the same. Change-Id: Ib190781f26f82f339eaf8039de459376ac0e3a5e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-27sb/intel/i82801jx: Move `acpi_fill_fadt` to fadt.cAngel Pons
At least i82801ix does this. Change-Id: Ic555ab17c2eca0399938d2842ca51628899c1544 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42637 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 03:42:09 +0000