summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801gx
AgeCommit message (Collapse)Author
2017-04-27i82801gx: Enable PCI-to-PCI bridgeKyösti Mälkki
Once the PCI command register is written the bridge forwards future IO and memory regions, as programmed in the respective base and limit registers, to the secondary PCI bus. Since the LPC function claims the resources for IOAPIC, ROM and low IO (0x0-0xfff) in its read_resources() call, the PCI-to-PCI configuration will not overlap those regions and does not hide the resources mentioned in the original comment. The bridge was disable in the following commit [1] commit a8e1168064b34b46494b58480411a11bc98340f6 Author: Stefan Reinauer <stepan@coresystems.de> Date: Wed Mar 11 14:54:18 2009 +0000 This patch contains some significant updates to the i82801gx component and will be required for a series of later patches. Roughly it contains: but unfortunately it was not noted which system this caused problems with. [1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=a8e1168064b34b46494b58480411a11bc98340f6 Change-Id: I75128d83a344f4a0e09a3ea623c7f92a016ebfb9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/2706 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-11sb/intel/i82801gx: Add i2c_block_read to smbus.hArthur Heymans
Using i2c_block_read speeds up reading SPD four to fivefold compared to sequential byte read. TESTED on Intel D945GCLF. Change-Id: I6d768a2ba128329168f26445a4fca6921c0c8642 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18927 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-22southbridge/intel/i82801gx: Fix problems found by checkpatch.plArthur Heymans
Change-Id: Iddc67e7c126ce19429afc24b021e385353564cb8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18705 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-11intel/i945: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Scratchpad register was read too late in ramstage so acpi_is_wakeup_s3() did not evaluate correctly. This fixes low memory corruption at 0x1000-0x102c and the lack of coreboot tables (util/cbmem not working) after S3 resume. This also fixes console log from reporting early in ramstage "Normal boot" while on "S3 resume" path. Change-Id: I2922a15a90d2f8272c3482579bdd96f8f33e9705 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17675 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11x86 SMM: Fix use with RELOCATABLE_RAMSTAGEKyösti Mälkki
The value for _size was not evaluated correctly if ramstage is relocated, make the calculation runtime. While touching it, move symbol declarations to header file. Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-10intel 82801dx/gx/ix: Commit SMM relocation code to DRAMKyösti Mälkki
Make sure relocation code reaches DRAM before issuing any SMIs. Snooping and cache coherency may have undefined behaviour as CPUs do not have uniform MTRR layout yet. Change-Id: I47a7d684e05ff8c1c2f1f6a5bf8c0bbc561d9eac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17712 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17545 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21intel/i82801gx: Reorder spaces in outputPaul Menzel
Currently, the coreboot log of a Lenovo X60, not having any IDE devices connected, there is a trailing whitespace in the output. […] PCI: 00:1f.1 init ... i82801gx_ide: initializing... PCI: 00:1f.1 init finished in 11 usecs […] Reorder the whitespaces, so they are added when needed. Change-Id: I640e514c89fe0246a847d1fd088def1c88e864f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/11870 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-07src/southbridge: Remove whitespace after sizeofElyes HAOUAS
Change-Id: Ic3b599d49a4c03ad8035c558b975f31cb91d253b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16862 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/intel/i82801gx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801gx. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Ia257318a7068b54739f319bfbba35f2a07826940 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-07intel/i82801gx 82801ix: Remove OpRegion of SMBus hostKyösti Mälkki
Defining this OpRegion for SMBus controller prevents linux kernel driver i2c-i801 from registering SMBus under sysfs, with following error in dmesg: ACPI Warning: SystemIO range .. conflicts with OpRegion .. (\_SB.PCI0.SBUS.SMBI) Solution taken from intel/bd82x6x. Worth noting we do not define ENABLE_SMBUS_METHODS anywhere currently. Removed remaining reference to HSTS from GETAC P470. Change-Id: I7c13d344b0343387681b46019cc5061b1435b46b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16266 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-31src/southbridge: Code formatingElyes HAOUAS
Change-Id: Icfc35b73bacb60b1f21e71e70ad4418ec3e644f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16291 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-28src/southbridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I43b9b86fd51dbdc50108026099c60238f3012cbe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16290 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-15southbridge/intel/i82801gx: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I08fb52ca13a4355d95fe31516c43de18d40de140 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15679 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-02-23southbridge/intel/ibexpeak: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Remove the now unused bd82x6x/gpio.c. Needs test on real hardware ! Change-Id: Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13616 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-20sb/intel/i82801gx: Clean up sata.cDamien Zammit
This tidies up the setting of the PCS register. An assumption is made that bit 4 of this register is read-only, which according to the ICH7 datasheet, it is. Change-Id: Ia9b7d38a87e26236f6ebc951c169cae12b13139f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13015 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-01-15sb/intel/i82801gx: Fix sata AHCI for desktop NM10/ICH7Damien Zammit
Tested on Intel D510MO Before this patch, I was unable to get the SATA controller into AHCI mode. That is, I could never see PCI ID 8086:27c1 appearing on the bus. With sata_ahci set, controller now goes into AHCI mode and works. 8086:27c1 Tested on X60 with AHCI enabled 8086:27c5 (AHCI mode for mobile ich7) No regressions detected. Change-Id: I4a3eabb5773106a0825fa2f30ee400fbfe636c7f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12923 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24southbridge/intel: Use i82801gx code for NM10Damien Zammit
It works as an ICH7 on Intel D510MO mainboard Change-Id: Ib8c76c001dffee8f93e3d6aa3156d4413b2e842a Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/12431 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7108 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-07timestamp: remove conditional #if CONFIG_COLLECT_TIMESTAMPSAaron Durbin
Empty functions are provided when !CONFIG_COLLECT_TIMESTAMPS so stop guarding the compilation. BUG=None BRANCH=None TEST=Built Original-Change-Id: Ib0f23e1204e048a9b928568da02e9661f6aa0a35 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228190 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9aa69fd43d77f5f7acdc9f361016c595dd16104e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I14418c8ef3ccb57ac6fce05b422e1c21b1d38392 Reviewed-on: http://review.coreboot.org/10742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08x86 SMM: Relocator is intel-onlyKyösti Mälkki
Change-Id: I78519b8f060b1ba81e8b9c7c345820180a14f2fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10441 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-29i82801gx: Reserve LPC decodes.Vladimir Serbinenko
This change makes sure that LPC controller declares resources that it actually decodes. bd82x6x already does it but i82801gx doesn't leading to allocator potentially allocating something else to the same range. Change-Id: Ieca9852e54c08e31d4d41aea97f317d9a6919806 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7662 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-08southbridge/i82801gx: Add x_EN defines for LPC_ENDamien Zammit
A few hardcoded values could be fixed after this commit Change-Id: I3ae67f4f6136361d67d4fdae2a5a29b7b1a75478 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/10065 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-04-28Kconfig whitespace fixesMartin Roth
trivial whitespace fixes. Mostly changing leading spaces to tabs. Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-28intel SMI handlers: Refactor GPI SMI/SCI routingKyösti Mälkki
Move the GPI interrupt routing selection between SMI/SCI from mainboards to southbridge. There is speculation if this is all just legacy APM stuff that could be removed with a followup. Change-Id: Iab14cf347584513793f417febc47f0559e17f5a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7967 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-04-27kbuild: automatically include southbridgesStefan Reinauer
This change switches all southbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in southbridge/Makefile.inc or in southbridge/<vendor>/Makefile.inc. In order to be able to drop southbridge/amd/Makefile.inc, some scattered source files had to be moved to a southbridge/amd/common directory, in accordance to what we are doing on other architectures already. This means, vendor and southbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9796 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-06global: Refactor get_option usageVarad Gautam
Restructure get_option() calls to avoid unnecessary return value checks by pre-assigning defaults to the options being retrieved. Change-Id: I9159afe149a8eeed0785d1efd6eee8420b88b8f4 Signed-off-by: Varad Gautam <varadgautam@gmail.com> Reviewed-on: http://review.coreboot.org/8631 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-11x86 SMM: Replace weak prototypes with weak function stubKyösti Mälkki
Change-Id: I682617cd2f4310d3e2e2ab6ffec51def28a4779c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7961 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-01-06southbridge: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the southbridge code to use printk() on all non-ROMCC boards. Change-Id: I312406257e66bbdc3940e206b5256460559a2c98 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8110 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-05timestamps: Switch from tsc_t to uint64_tStefan Reinauer
Cherry-pick from chromium and adjusted for added boards and changed directory layout for arch/arm. Timestamp implementation for ARMv7 Abstract the use of rdtsc() and make the timestamps uint64_t in the generic code. The ARM implementation uses the monotonic timer. Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> BRANCH=none BUG=chrome-os-partner:18637 TEST=See cbmem print timestamps Original-Change-Id: Id377ba570094c44e6895ae75f8d6578c8865ea62 Original-Reviewed-on: https://gerrit.chromium.org/gerrit/63793 (cherry-picked from commit cc1a75e059020a39146e25b9198b0d58aa03924c) Change-Id: Ic51fb78ddd05ba81906d9c3b35043fa14fbbed75 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8020 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-04smihandler.c: Fix doxygen errors in southbridge_smi_handlerMartin Roth
Correct the param to match the functions. Change-Id: Id002c549a6ba6a7be4fa5eee396769eaa2510698 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8074 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03i945: Consolidate acpi/platform.aslVladimir Serbinenko
Change-Id: Iccb2dda8a427e483c04693e46b00e0bc2452a26b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-03i82801gx: Enable upper CMOS in bootblock.Vladimir Serbinenko
Otherwise checksum may not work correctly on early stages. For compatibility with old bootblocks also enable it early in romstage. Change-Id: Ie541d71bd76af182e445aa5ef21fe5ba77091159 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
According to spec IRQ1 isn't available for PIRQ assignment. Has gone unnoticed probably because modern OS use MSI or at least APIC and even with noapic don't use IRQ1 with PCI IRQs. Change-Id: Idc7db249007df629b27e8cae41cc80358d5306f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7478 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-11-09i945: consolidate sb & nb early initsVladimir Serbinenko
Change-Id: I00c2c725de5b982a5e4f584b77b09017a5bc0a72 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7062 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-11-09i945: Consolidate common GNVS initVladimir Serbinenko
Change-Id: Idc3522807b17e56bdaf8f04b4bd68c6ed9777363 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7110 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-09i82801gx: Move to implicit length patchingVladimir Serbinenko
Change-Id: Idba0f33d231084d02392e23026f567c30f77b316 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7328 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-05soutbridge/*/bootblock: Use pci_dev_t over device_t typedefEdward O'Callaghan
Change-Id: I693b09d588ed6d56177cf86c23497231623b69c0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7193 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-11-04i82801gx: Handle whole FADT in southbridge.Vladimir Serbinenko
Do all the handling in SB code with few parameters from devicetree.cb instead of having mobo callbacks. Change-Id: I8fd02ff05553a3c51ea5f6ae66b8f5502509e2bc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7199 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
Most of the code related to the mc146818 is not related to the RTC and is really for managing the CMOS storage. Since we intend to add a generic API for RTC drivers it's inconvenient for those functions to have an rtc_ prefix. This CL renames those functions so they start with cmos_ instead. There are some places where rtc_init was called with a comment that says something about starting the RTC. That wasn't correct before (the RTC is always running), but it looks a little odd now that the function is called cmos_init. This CL also opportunistically cleans up some style problems in this file. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/197794 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788) Removed the addition of stdint.h to mc146818rtc.h since types.h is now included. Changed rtc_init to cmos_init for fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex. Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18i945: Consolidate FADT codeVladimir Serbinenko
Change-Id: I076cba7d21926cabf90d485de50268ae40c435f3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7087 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-15i945: Convert to per-device ACPIVladimir Serbinenko
Change-Id: Iee3ee33ca58b8c722d2d38aae31e7130032512ad Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6804 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-13azalia: Shrink boilerplateVladimir Serbinenko
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6840 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-05i82801gx: Kill unused TCG and SMI1Vladimir Serbinenko
SMI1 is being written to but never read from. Change-Id: I82c0800713e3093eb1317b5e1f6f228771134857 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6808 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-07-17southbridge,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I8ef5f1571ad14ead2d4cc0d61b6b7133d7fc8550 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6293 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-08southbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I5484ebb665453777cc3b2561be6e50c787f1a257 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6209 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Icab0aeb2d5bf19b4029ca29b8a1e7564ef59a538 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6071 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
Read this variable from PCI configuration capabilities list instead. Change-Id: I0cfe981833873397c32cd3aa2af307f35f01784b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-02global: Fix usage of get_option() to make use of CB_CMOS_ codesAlexandru Gagniuc
Do not directly check the return value of get_option, but instead compare the returned value against a CB_CMOS_ error code, or against CB_SUCCESS. Change-Id: I2fa7761d13ebb5e9b4606076991a43f18ae370ad Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
This retrieves back the value stored with store_initial_timestamp() in the bootblock for southbridge. Change-Id: I377c823706c33ed65af023d20d2e4323edd31199 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3908 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-10intel/i945 intel/i82801gx: remove explicit pcie config accessesKyösti Mälkki
Now that MMCONF_SUPPORT_DEFAULT is enabled by default remove the pcie explicit accesses. The default config accesses use MMIO. Change-Id: I46e69154cf576ddb642c34b6dd2bc0d27cc19b7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3811 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29usbdebug: Change debug port scanningKyösti Mälkki
On AMD platforms, setting of USBDEBUG_DEFAULT_PORT=0 tries to scan all physical ports one after other in incrementing order. To avoid possible problems with other USB devices, one can select the port number here and bypass the scan. Intel platforms can communicate with usbdebug dongle on one physical port only, and this option makes no difference there. Change-Id: I45be6cc3aa91b74650eda2d444c9fcad39d58897 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3872 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-02Remove unnecessary space characters.Andrew Wu
Change-Id: I4ed9329126b216eb4ae58355672603ce79a6d4ef Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3847 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-07-30Makefile: Fix adding intel/commonKyösti Mälkki
Directory intel/common must be conditionally added in the list of source directories, as the parent directory southbridge/intel is unconditionally added even for boards without such device. Change-Id: I7088bc6db9f56909ffa996aa7eff76cd72e177eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3827 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-10Drop some duplicates of PCI-e config functionsKyösti Mälkki
These are not specific to Intel. Further work needs to be done to combine these with MMCONF_SUPPORT in arch/io.h. Change-Id: Id429db2df8d47433117c21133d80fc985b3e11e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10southbridge/intel/i82801gx: Make compilation possible with CONFIG_SMM_TSEGDenis 'GNUtoo' Carikli
Without that fix, and with CONFIG_SMM_TSEG, we have: src/southbridge/intel/i82801gx/smihandler.c: In function 'southbridge_smi_sleep': src/southbridge/intel/i82801gx/smihandler.c:340:3: error: implicit declaration of function 'smi_release_lock' [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make: *** [build/southbridge/intel/i82801gx/smihandler.smm.o] Error 1 The fix is modelled after src/cpu/x86/smm/smihandler.c which ifdefs smi_release_lock(). Change-Id: Icdc6d039b34a1d95d0e607419bba2484d21abc5e Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3281 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10i82801gx: smihandle: sync with southbridge/intel/bd82x6x/smihandler.cDenis 'GNUtoo' Carikli
Change-Id: Ic725b169061bd426aa8206dc1d6d31e67cc639f2 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3304 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10southbridge: i82801gx: smihandler.c: Correct outl->outw mistake.Denis 'GNUtoo' Carikli
This mistake was spoted by comparison with the src/southbridge/intel/bd82x6x/smihandler.c file. Change-Id: I1516f0131d524bd7d001e6780e9a45402d1814d1 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3303 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-01usbdebug: Unify Intel southbridge buildsKyösti Mälkki
EHCI controller enable is identical on the affected chipsets. Change-Id: I91830b6f5144a70b158ec1ee40e9cba5fab3fbc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3424 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-07-01usbdebug: Drop duplicates of EHCI BAR relocation codeKyösti Mälkki
All the additional work that needs to be done in EHCI BAR relocation is independent of the hardware platform and was functionally identical in all the copies removed. When USBDEBUG is not selected, PCI EHCI controllers use standard pci_dev_read_resources() call. With USBDEBUG selected, PCI EHCI controller's device_operations .read_resources is replaced with pci_ehci_read_resources() call, which in turn will replace the device_operations .set_resources call. The replacement for .set_resources reconfigures usbdebug driver side, and calls the original .set_resources to configure hardware side. Change-Id: I8e136a5da4efedf60b6dd7068c0488153efaaf8e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3412 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-19intel/i82801gx: Store initial timestampNico Huber
Upgrade the ICH7 bootblock to store an initial timestamp like we do it since Sandy Brigde. I've checked the datasheets for the used scratchpad registers and grepped for their usage. I'm pretty sure that they aren't used on any ICH7 based board (for anything before the usual S3-resume indication). Change-Id: I28a9b90d3e6f6401a8114ecd240554a5dddc0eb5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3498 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12usbdebug: Drop printk within console_init()Kyösti Mälkki
In case with EARLY_CONSOLE, this printk is called before any other console is configured to transmit data. This outputs garbage on CONSOLE_SERIAL as baudrate is not yet programmed. For case without EARLY_CONSOLE, the order in which different console drivers initialize is obscure. Might sometimes work properly. Change-Id: I3792161e0a6dc17e17262048cc9136044dd69dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3384 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-12intel/*/smi.c: Output correct GPIO in ALT_GP_SMI_STS register dumpKonstantin Aladyshev
Mapping is as follows: bit 15 corresponds to GPIO15 ... bit 0 corresponds to GPIO0. Change-Id: I661ce56d9373887270ba3c0518892fbbe6d9de7c Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/3436 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11Fix cycle error in intel southbridges to display GPI statusKonstantin Aladyshev
Fix obvious mistake in cycle that displays GPI status I hope i found all duplicates of it. Change-Id: Ic21ff3ecab85953463e5c23daf808dd5edc82ff8 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/3435 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-07Intel 82801Gx: LPC: Unify I/O APIC setupPaul Menzel
Remove local copies of reading and writing I/O APIC registers by using already available functions. This change is similar to commit db4f875a412e6c41f48a86a79b72465f6cd81635 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Jan 31 17:24:12 2012 +0200 IOAPIC: Divide setup_ioapic() in two parts. Reviewed-on: http://review.coreboot.org/300 and commit e614353194c712a40aa8444a530b2062876eabe3 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Feb 26 17:24:41 2013 +0200 Unify setting 82801a/b/c/d IOAPIC ID Reviewed-on: http://review.coreboot.org/2532 and uses `io_apic_read()` and `io_apic_write()` too. As commented by Aaron Durbin, a separate `i82801gx_enable_acpi()` is not needed: “The existing code path *in this file* is about enabling the io apic.” [1]. [1] http://review.coreboot.org/#/c/3182/4/src/southbridge/intel/lynxpoint/lpc.c Change-Id: I104a2d9c2898da14d26f8f2992d5a065ad640356 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3181 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-04-26Intel 82801gx: Use 2 << 24 to clarify that I/O APIC ID is 2Paul Menzel
Commit »Support for the Intel ICH7 southbridge.« (debb11fc) [1] used `1 << 25` to set the I/O APIC ID of 2. Instead using `2 << 24`, which is the same value, makes it clear, that the I/O APIC ID is 2. Commit »Intel Panther Point PCH: Use 2 << 24 to clarify that APIC ID is 2« (8c937c7e) [2] is used as a template. [1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=debb11fc1fe5f5560015ab9905f1ccc2e08c73e0 [2] http://review.coreboot.org/3100 Change-Id: Ib688500944cd78a1cc1c8082bb138fa9468bdbfb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3122 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-28Use defines for some i82801ex/gx registersKyösti Mälkki
Change-Id: I0069ec26278b82d61ce5bcfb94d77647dfd3254b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2530 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
Change-Id: Ibb6606fe3996e377181872a4544600f2d58c5439 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1834 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-26Refactor driver structsPatrick Georgi
Our driver infrastructure became more flexible recently. Make use of it. These are the low hanging fruits (files with 5 device variants or more), but there are still lots of files with less potential for deduplication. Change-Id: If6b7be5046581f81485a511b150f99b029b95c3b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-04-27SMM: unify mainboard APM command handlersStefan Reinauer
rename from mainboard_apm_cnt to mainboard_smi_apmc to match the function naming scheme of the other handlers. Add prototype for mainboard_smi_sleep (mainboard specific S3 sleep handlers in SMM) that is required by Sandybridge. Change-Id: Ib479397e460e33772d90d9d41dba267e4e7e3008 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/933 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-24i82801gx: Support power-on-after-power-fail betterPatrick Georgi
Changing CMOS value for power-on-after-power-fail was only honored after reboot, which is counter intuitive (set from "enable" to "disable", power-off, replug device -> device turns on; and similar cases). Change-Id: If1d88c1c34c3333b636ed3ec1e1fb9bea394e615 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/444 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-24i82801gx: Use CMOS variable if available for power-on on power failurePatrick Georgi
We used a hard coded value for some reason. Don't do that, but use CMOS instead. Change-Id: Ib83aa07a3e55bed075150354a060317ebc9d5ba7 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/443 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Avoid ../../.. paths in ASL filesPatrick Georgi
The current directory is always part of the search path of cpp when using #include "..." Change-Id: I74fe39e0c79835e4b9a927afcbeab21040d8ae52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Remove whitespace.Patrick Georgi
Fix issues reported by new lint test. Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-31Fix usb debug dongle supportSven Schnelle
- move enable_usbdebug() declaration to usbdebug.h - reinitialize debug driver in ramstage, as copying the data structure from romstage doesn't work right now. This way of copying data from romstage to ramstage is really board/cpu specific, and is likely to break often. So don't do it. Change-Id: I394678ded6679c1803e29eb691b926182bdcab68 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-27i82801gx: Fix port status in AHCI modeSven Schnelle
The code used PCI register 0x92 to enable sata ports, which is wrong. The ICH7 documentation states: "This register is only used in systems that do not support AHCI. In AHCI enabled systems, bits[3:0] must always be set (ICH7R only) / bits[2,0] must always be set (Mobile only), and the status of the port is controlled through AHCI memory space." Writing 0x0f to ICH7-M doesn't seem to hurt, so lets write 0x0f for both variants. This patch makes sata_ahci work on my Thinkpad T60 and X60s. Change-Id: If3b3daec2e5fbaa446de00272ebde01cd8d52475 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/340 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-25i82801gx: Add setting for C4onC3 modeSven Schnelle
If this bit is set, ich7 will enter C4 mode if possible instead of C3. See ich7 specification (LPC controller, Power management control registers) for more details. Change-Id: I352cccdbc51ff6269f153a4542c7ee1df0c01d22 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/329 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-25i82801gx: Add write and read/write block functionsSven Schnelle
Change-Id: Icbfc47a8d7bfe1600e4212b26e99b2a604de9ef7 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/326 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-23i82801gx: Don't set I/O base address to static valueSven Schnelle
Doing it this way will break all subsequent smbus calls, because the smbus code still uses res->base, which points to the old base address. Fix this by allocating a proper resource. Change-Id: I0f3d8fba5f8e2db7fe4ca991ef2c345aff436ea4 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/325 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
Change-Id: I2a3aaf10e453fa6cce8a993356f2a0587178209a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/276 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 13:00:51 +0000