summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/common
AgeCommit message (Collapse)Author
2017-06-16sb/intel/common/firmware: Keep CHECK_ME disabled by defaultNaresh G Solanki
While building poppy board, build failed with following error message: Writing new image to build/coreboot.pre.new mv build/coreboot.pre.new build/coreboot.pre util/me_cleaner/me_cleaner.py -c build/coreboot.pre > /dev/null This image does not contains a ME/TXE firmware NR = 0) make: *** [src/southbridge/intel/common/firmware/Makefile.inc:55: add_intel_firmware] Error 1 Hence keeping CHECK_ME unset by default. TEST=Succesfully built coreboot for Poppy & booted to OS. Change-Id: Ib3186498c8da307b686c06c3828e24acbc7f2d17 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-24southbridge/intel: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I23c1108c85532b7346ff7e0adb0ac90dbf2bb2cc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-23sb/intel/common: Add common EC fw supportLijian Zhao
Add support to the Intel common firmware Kconfig and Makefile.inc to allow the embedded controller (EC) blob to be added to the final binary through ifdtool. TEST=Add ec.bin and enable in config, build is successful. Change-Id: Ib14732b4d263dde4770bf26b055c005de2540338 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-19drivers/spi/spi_flash: Move flash ops to spi_flash_ops structureFurquan Shaikh
Define a new spi_flash_ops structure, move all spi flash operations to this structure and add a pointer to this structure in struct spi_flash. BUG=b:38330715 Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Clean up SPI flash probeFurquan Shaikh
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it so that drivers can use it outside spi_flash.c. 2. Make southbridge intel spi driver use spi_flash_generic_probe if spi_is_multichip returns 0. 3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to provide specialized probe functions. With this change, the specialized spi flash probe functions are now associated with a particular spi ctrlr structure and no longer disconnected from the spi controller. BUG=b:38330715 Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-19drivers/spi/spi_flash: Pass in spi_slave structure as const to probe functionsFurquan Shaikh
Pointer to spi_slave structure can be passed in as const to spi flash probe functions since the probe functions do not need to modify the slave properties. BUG=b:38330715 Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19707 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-03-19sb/intel/common/firmware: Add Intel ME/TXE firmware checkNicola Corna
Ensure that the provided ME/TXE firmware is valid, using the check capabilities of me_cleaner. me_cleaner checks that the fundamental partition is available and it has a correct signature. The checks performed by me_cleaner aren't exhaustive, but they should find at least whether the user has provided an empty or corrupted firmware. me_cleaner has been tested on all the ME (6-11.6) and TXE (1-3) firmwares available here [1], and it hasn't reported any false positive. [1] http://www.win-raid.com/t832f39-Intel-Engine-Firmware-Repositories.html Change-Id: Ie6ea3b4e637dca4097b9377bd0507e84c4e8f687 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18768 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-02-08southbridge/intel/common/firmware: allow locking ME without HAVE_ME_BINAaron Durbin
The apollolake boards don't have an me.bin proper, but they still have descriptor regions which need to be locked down. Therefore, remove the restriction of HAVE_ME_BIN from LOCK_MANAGEMENT_ENGINE. BUG=chrome-os-partner:62177 TEST=For apollolake one can select LOCK_MANAGEMENT_ENGINE. Change-Id: I73aab3a604ec25cd56d760bf76cc21c5a298799e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18304 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-04sb/intel/common: Hook up me_cleanerNicola Corna
The me_cleaner option is available on multiple platforms: * Sandy and Ivy Bridge (well tested by multiple users). * Skylake and Braswell (tested). * Haswell, Broadwell and Bay Trail (untested). The untested platforms have been included anyways because all the firmwares are very similar and Intel ME/TXE probably behaves in the same way. Change-Id: I46f461a1a7e058d57259f313142b00146f0196aa Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18206 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03sb/intel/common/gpio: Support ICH9M and priorPatrick Rudolph
Write gpio level twice to make sure the level is set after pins have been configred as GPIO and to minimize glitches on newer hardware. Required to set correct GPIO layout on T500. Tested on T500. Change-Id: I691e672c7cb52ca51a80fd29657ada7488db0d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18012 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17545 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06spi_flash: Make a deep copy of spi_slave structureFurquan Shaikh
Commit 36b81af (spi: Pass pointer to spi_slave structure in spi_setup_slave) changes the way spi_setup_slave handles the spi_slave structure. Instead of expecting spi controller drivers to maintain spi_slave structure in CAR_GLOBAL/data section, caller is expected to manage the spi_slave structure. This requires that spi_flash drivers maintain spi_slave structure and flash probe function needs to make a copy of the passed in spi_slave structure. This change fixes the regression on Lenovo X230 and other mainboards. Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17728 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of flash_programmer_probe in spi_slave structureFurquan Shaikh
flash_programmer_probe is a property of the spi flash driver and does not belong in the spi_slave structure. Thus, make spi_flash_programmer_probe a callback from the spi_flash_probe function. Logic still remains the same as before (order matters): 1. Try spi_flash_programmer_probe without force option 2. Try generic flash probing 3. Try spi_flash_programmer_probe with force option If none of the above steps work, fail probing. Flash controller is expected to honor force option to decide whether to perform specialized probing or to defer to generic probing. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08southbridge/intel: Set chipset in ifdtool invocationsAndrey Petrov
Since IFD format is floating, ifdtool needs to be parameterized with a chipset it is dealing with. Add -p <chipset> argument to ifdtool invocations if chipset provides it. Change-Id: I4fd1783b5d994617912aedcf17adc2a98c97227b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17258 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-16southbridge/intel/common: Add common gpio.cPatrick Rudolph
Add a common southbridge gpio code to reduce existing duplicated code. By adding it to ram-stage, GPIOs can be changed any time, without the need of direct register access. The files are based on bd82x6x and lynxpoint gpio.c. Change-Id: Iaf0c2f941f2625a5547f9cba79da1b173da6f295 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-08intel/common/firmware: Add option to configure SPI for EM100Martin Roth
Add a Kconfig option to set the firmware descriptor to allow EM100 use. Change-Id: If5d7cd6ad671f0328ee5be0b5e660dbc837fcac3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
coreboot has no CREDITS file. Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11514 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-04bootstate: remove need for #ifdef ENV_RAMSTAGEAaron Durbin
The BOOT_STATE_INIT_ENTRY macro can only be used in ramstage, however the current state of the header meant bad build errors in non-ramstage. Therefore, people had to #ifdef in the source. Remove that requirement. Change-Id: I8755fc68bbaca6b72fbe8b4db4bcc1ccb35622bd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11492 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-04intel/common/firmware: Add common GBE rom supportMartin Roth
Add support to the Intel common firmware Kconfig and Makefile.inc to allow the Gigabit Ethernet (GBE) blob to be added to the final binary. Change-Id: Id5fab3061874dad759750b67d3339eb8c99a62d6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10875 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-07-02ME/IFD binaries: Implement sane defaults for file pathsStefan Reinauer
Change-Id: I81298aca07c18359e8e4bf5b2d8926d6b45a30c5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10763 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-02ifdfake: Add prompts and help for the regions in KconfigMartin Roth
Update the ifdfake region questions in Kconfig with help descriptions and prompts to allow values to be entered and not just use pre-defined default values. Change-Id: Ifdffadc3d74ec49492c2ded66623a1be6945425f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10649 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Intel Firmware Descriptor: Add Lock ME Kconfig questionMartin Roth
Add the Kconfig question to allow the user to lock the ME section using ifdtool. Change-Id: I46018c3bc9df3e309aa3083d693cbebf00e18062 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Move baytrail & fsp_baytrail to the common IFD interface.Martin Roth
- Add the common/firmware subdir to the baytrail & fsp_baytrail makefiles and remove the code it replaces. - Update baytrail & fsp_baytrail Kconfigs to use the common code. - Update the IFD Kconfig help and prompts for the TXE vs ME. - Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail platforms have their own defaults. Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10647 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-02Intel Firmware Descriptor Kconfig: remove USES_INTEL_MEMartin Roth
When I added the common IFD Kconfig and Makefile, My thinking was that I could use this symbol to differentiate between the ME and the TXE, and to exclude the ME questions from platforms that use the IFD, but don't use an ME, like Rangeley. In practice this made things a lot more complicated and isn't worth it. Change-Id: I4428744e53c6bb7fc00a4fa4f0aa782c25fc9013 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-23southbridge/intel: Create common IFD Kconfig and MakefileMartin Roth
We've got a lot of duplicated code to set up the IFD/ME/TXE/GBE/ETC. This is the start of creating a common interface for all of them. This also allows us to reduce the chipset dependencies for CBFS_SIZE. Change-Id: Iff08f74305d5ce545b5863915359eeb91eab0208 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10613 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-27kbuild: automatically include southbridgesStefan Reinauer
This change switches all southbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in southbridge/Makefile.inc or in southbridge/<vendor>/Makefile.inc. In order to be able to drop southbridge/amd/Makefile.inc, some scattered source files had to be moved to a southbridge/amd/common directory, in accordance to what we are doing on other architectures already. This means, vendor and southbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9796 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
The GCC 4.9.2 update showed that the boot_state_init_entry structures were being padded and assumed to be aligned in to an increased size. The bootstate scheduler for static entries, boot_state_schedule_static_entries(), was then calculating the wrong values within the array. To fix this just use a pointer to the boot_state_init_entry structure that needs to be scheduled. In addition to the previous issue noted above, the .bs_init section was sitting in the read only portion of the image while the fields within it need to be writable. Also, the boot_state_schedule_static_entries() was using symbol comparison to terminate a loop which in C can lead the compiler to always evaluate the loop at least once since the language spec indicates no 2 symbols can be the same value. Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8699 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-17Intel common SPI: Fix compilation breakage from refactoringStefan Reinauer
When the Intel SPI drivers were refactored, compilation for Chrome OS devices broke, because ELOG uses the SPI driver in SMM. Change-Id: If2b2da5d526196ed742e17409b01a381417d0ce8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/8701 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2014-12-17x86: Initialize SPI controller explicitly during PCH initDavid Hendricks
This ensures that SPI is ready when eventlog code is used. x86 platforms which use eventlog invoke elog_clear() in GSMI and elog_add_event_raw() when deciding the boot path based on ME status. For the SMM case spi_init() is called during the finalize stage in SMM setup. For the boot path case we can call spi_init() at the beginning of BS_DEV_INIT and it will be ready to use when the boot path is determined from the ME status. BUG=none BRANCH=none TEST=tested on Link (bd82x6x), Beltino (Lynxpoint), and Rambi (Baytrail) with follow-up patch Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id3aef0fc7d4df5aaa3c1c2c2383b339430e7a6a1 Original-Reviewed-on: https://chromium-review.googlesource.com/194525 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 173d8f08e867bab8c97a6c733580917f5892a45d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ifaed677bbb141377b36bd9910b2b1c3402654aad Reviewed-on: http://review.coreboot.org/7756 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-09spi: Eliminate the spi_cs_activate and spi_cs_deactivate functions.Gabe Black
They were only used internal to the SPI drivers and, according to the comment next to their prototypes, were for when the SPI controller doesn't control the chip select line directly and needs some help. BUG=None TEST=Built for link, falco, and rambi. Built and booted on peach_pit and nyan. BRANCH=None Original-Change-Id: If4622819a4437490797d305786e2436e2e70c42b Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/192048 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 1e2deecd9d8c6fd690c54f24e902cc7d2bab0521) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ida08cbc2be5ad09b929ca16e483c36c49ac12627 Reviewed-on: http://review.coreboot.org/7708 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-09spi: Remove the spi_set_speed and spi_cs_is_valid functions.Gabe Black
spi_set_speed was never implemented, and spi_cs_is_valid was only implemented as a stub and never called. BUG=None TEST=Built for rambi, falco, and peach_pit. BRANCH=None Original-Change-Id: If30c2339f5e0360a5099eb540fab73fb23582905 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/192045 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 98c1f6014c512e75e989df36b48622a7b56d0582) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iebdb2704ee81aee432c83ab182246d31ef52a6b6 Reviewed-on: http://review.coreboot.org/7707 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-11-19i82801ix,bd82x6x,ibexpeak: rewrite expresscard hotplugVladimir Serbinenko
This implementation is more compact, unified and works with windows as well. Tested under windows and under Debian GNU/Linux. Change-Id: I585dec12e17e22d829baa3f2dc7aecc174f9d3b5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7296 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2014-10-17Fix ICH spi implementation which reads data from different chips.Philipp Deppenwiese
This patch adjusts the read timeout in order to support flash chips which needs more than 60ms to complete a spi command. This problem can be reproduced on a Thinkpad T520 with M25PX64 spi chip ( suspend to ram bug ). Change-Id: I22b2e59f1855ead6162a292b83b9b854b55c0235 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: http://review.coreboot.org/7105 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-07-14SPI: Split writes using spi_crop_chunk()Kyösti Mälkki
SPI controllers in Intel and AMD bridges have a slightly different restriction on how long transactions they can handle. Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6163 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-05spi: Change spi_xfer to work in units of bytes instead of bits.Gabe Black
Whenever spi_xfer is called and whenver it's implemented, the natural unit for the amount of data being transfered is bytes. The API expected things to be expressed in bits, however, which led to a lot of multiplying and dividing by eight, and checkes to make sure things were multiples of eight. All of that can now be removed. BUG=None TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI errors in the firmware log. Built for rambi. BRANCH=None Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/192049 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> [km: cherry-pick from chromium] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6175 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05spi: Remove unused parameters from spi_flash_probe and setup_spi_slave.Gabe Black
The spi_flash_probe and and spi_setup_slave functions each took a max_hz parameter and a spi_mode parameter which were never used. BUG=None TEST=Built for link, falco, rambi, nyan. BRANCH=None Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/192046 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> [km: cherry-pick from chromium] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6174 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-01stdlib: Drop duplicates of min() and max()Kyösti Mälkki
Change-Id: Ib2f6fad735e085d237a0d46e0586e123eef6e0e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6161 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
SPI registers didnt change since ICH8. No need to have separate files for them. Unify. Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5254 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-10usbdebug: Remove duplicate port claimKyösti Mälkki
This claim is useless when done before EHCI controller reset. Code in usbdebug_init_() already sets this properly after reset, see use of DBGP_OWNER. Change-Id: Ic17493fe4edbbbed6ebcbef35a264fbf188f1fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4709 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-22usbdebug: Fix boards without EARLY_CBMEM_INITKyösti Mälkki
The main usbdebug file lib/usbdebug.c was removed from romstage build with commit f8bf5a10 but the chipset-specific parts were not, leading to unresolved symbol errors for AMD platforms. Add a silent Kconfig variable USBDEBUG_IN_ROMSTAGE for convenient use of this feature. Change-Id: I0cd3fccf2612cf08497aa5c3750c89bf43ff69be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3983 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29intel usbdebug: Add choice of EHCI controllerKyösti Mälkki
Add option to choose one of the EHCI controllers in recent intel chipsets for usbdebug use. Since EHCI controller function changes from 0:1d.7 to 0:1d.0 in rcba_config() for some mainboards, check the PCI class code for match. Change-Id: I18a78bf875427c163c857c6f0888935c1d2a58d4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3440 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29usbdebug: Support choice of EHCI controllerKyösti Mälkki
Nowadays, chipsets or boards do not only have one USB port with the capabilities of a debug port but several ones. Some of these ports are easier accessible than others, so making them configurable is also necessary. This change adds infrastructure to switch between EHCI controllers, but does not implement it for any chipset. Change-Id: I079643870104fbc64091a54e1bfd56ad24422c9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3438 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-24Add pci_devfn_t and use with __SIMPLE_DEVICE__Kyösti Mälkki
Declare the functions that may be used in both romstage and ramstage with simple device model. This will later allow to define PCI access functions for ramstage using the inlined functions from romstage. Change-Id: I32ff622883ceee4628e6b1b01023b970e379113f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3508 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-23usbdebug: Do not support logging from SMMKyösti Mälkki
Letting SMI handler touch EHCI controller is an excellent source of USB problems. Remove usbdebug entirely from SMM. It may be possible to make usbdebug console work from SMM after hard work and coordination with payloads and even OS drivers. But we are not there. Change-Id: Id50586758ee06e8d76e682dc6f64f756ab5b79f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3858 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-08-01Add directive __SIMPLE_DEVICE__Kyösti Mälkki
The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-30Makefile: Fix adding intel/commonKyösti Mälkki
Directory intel/common must be conditionally added in the list of source directories, as the parent directory southbridge/intel is unconditionally added even for boards without such device. Change-Id: I7088bc6db9f56909ffa996aa7eff76cd72e177eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3827 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-01usbdebug: Unify Intel southbridge buildsKyösti Mälkki
EHCI controller enable is identical on the affected chipsets. Change-Id: I91830b6f5144a70b158ec1ee40e9cba5fab3fbc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3424 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 14:43:06 +0000