summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
AgeCommit message (Collapse)Author
2016-09-15southbridge/amd/sr5650/sr5650.c: Update acpi_fill_ivrsMartin Roth
- Update lines to make them shorter than 80 chaacters - Update using #defines from acpi_ivrs.h Change-Id: I1bf6cdac00e28f5b0969fd8f98e37c66f8e43110 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16568 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-15amd/sr5650: Update add_ivrs_device_entriesMartin Roth
Functionally, this should be roughly the same. The only real difference should be removing the 4 bytes of padding from the end of the 4 byte entries. The spec mentions a boundary for the 4 byte entries (which we are ignoring), but doesn't mention a boundary for the 8 byte entries, and I can't think of any other reason that the padding might be needed. - Wrap long lines. - Combine if statements to clean up indentation. - Use #defines from acpi_ivrs.h to make commands easier to understand. - Remove padding from 4 byte entries that made them 8 bytes in length. - Set the pointer p at init, and clear the value at p if the device we're looking at is enabled instead of setting p in every if statement. - Look at the command type to update current and length. - Treat malloc & free as if they were typical instead of coreboot specific versions. Check to make sure the malloc worked and only free on the last loop instead of every time. Change-Id: I79dd5f9e930fad22a09d1af78f33c1d9a88b3bfe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16532 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-13southbridge/amd/agesa/hudson: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/agesa/hudson. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: I39cd2afe5e2b6ee3963fd3e949eab1db9e986d71 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16401 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/sb800: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/sb800. Change-Id: I488cde4504128331106f50b34869905e30f5ab83 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16480 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/sb700: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/sb700. Change-Id: I44b0be2070719066dd18bbf2882c417caef5d8b2 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16479 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/sb600: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/sb600. Change-Id: I0227cc0c611324f513f8170c9d8819a88af39b39 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16478 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/rs780: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/rs780. Change-Id: Ia9929baeec7423e9e2f06324038ddfbec006beb7 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16477 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/rs690: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/rs690. Change-Id: Ief43393f62312bfe82e960faf56b1e2ec048f4ff Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16476 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/pi/hudson: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/pi/hudson. Change-Id: I8b22a8d9f0e90afaf0f218c5c0924a78883b7498 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16475 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/cimx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/cimx. Change-Id: Ibe2766b956b0ca02be63621aee9a230b16d9923b Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16474 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13southbridge/amd/amd8111: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/amd8111. Change-Id: I76cdc32171b7ce819b53c534b3a5e57e9dd5f3dd Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16473 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-07include/arch/acpi.h: change IVRS efr field to iommu_feature_infoMartin Roth
The field that was previously named 'efr' is actually the iommu feature info field. The efr field is a 64-bit field that is only present in type 11h or type 40h headers that follows the iommu feature info field. Change-Id: I62c158a258d43bf1912fedd63cc31b80321a27c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16508 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-02southbridge/amd/cs553x: Fix whitespace early_setup.cMartin Roth
Commit ba28e8d7 (src/southbridge: Code formating) incorrectly inserted some whitespace in these files. Change-Id: Ifdcc3580aaba224a396c6efec319e22610c6c81d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16385 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-31amd/sb700/bootblock.c: Restore accidentally deleted codeMartin Roth
The recent changes to this file from commit 6e5421d2 (sb/amd/sb700: Add option to increase SPI speed to 33MHz) were accidentally removed in a code cleanup patch: commit ba28e8d7 (src/southbridge: Code formating). Change-Id: I6cf3e8f29d5c0384d35637f35e051be40318d20f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16384 Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: build bot (Jenkins)
2016-08-31src/southbridge: Code formatingElyes HAOUAS
Change-Id: Icfc35b73bacb60b1f21e71e70ad4418ec3e644f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16291 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-28src/southbridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I43b9b86fd51dbdc50108026099c60238f3012cbe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16290 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-26sb/amd/sb700: Add option to increase SPI speed to 33MHzTimothy Pearson
Some SB700-based systems and ROMs support high speed (33MHz) SPI access instead of the power-on default 16.5MHz. Add an option to enable high speed SPI access in the bootblock, and set the default value to Disabled. This greatly decreases boot time on SB700-based systems, especiall when a large payload is in use. On a KGPE-D16 with a Petitboot (Linux + initramfs) payload, the command prompt was accessible within 20 seconds of power on, which incidentally is faster than the proprietary BIOS on the same machine could even reach the GRUB bootloader. Change-Id: Iadbd9bb611754262ef75a5e5a6ee4390a46e45cf Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Test: Booted KGPE-D16 with Linux payload Reviewed-on: https://review.coreboot.org/16306 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23src/southbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I42cc5b8736e73728c5deec6349e8d2a814e19e83 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16281 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Omar Pakker
2016-08-04sb/amd/sb700: Do not reset fifo after skipping the sent bytesTimothy Pearson
Port commit e08493 to the SB700 platform Change-Id: Ie18c6cc0ccb31a0d16a80fcb4c2e147c19e228fe Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/16054 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-03sb/amd/sb[6|7|8]00: Initialize PICTimothy Pearson
The PIC was not initialized, leading to hangs when booting Linux as a payload. This error was hidden by both SeaBIOS and GRUB due to both payloads initializing the PIC as a matter of routine. Change-Id: I9a3b9bd831d4dafdd0bb82ea023026a10fe7efca Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/16018 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31src/southbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I01413b9f8b77ecdcb781340f04c2fe9e24810264 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15941 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-30AMD/spi: Do not reset fifo after skipping the sent byteszbao
After we skip the bytes we send, the fifo pointer is at right position. Reseting the fifo will change it to a wrong place. Please view the flashrom code, which tells the same thing. https://code.coreboot.org/p/flashrom/source/tree/HEAD/trunk/sb600spi.c#L257 Change-Id: I31d487ce32c0d7ca3dead36d2b14611e73b1ad60 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/14955 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-18AGESA vendorcode: Build a common amdlibKyösti Mälkki
Having CFLAGS with -Os disables -falign-function, for unlucky builds this may delay entry to ramstage by 600ms. Build the low-level IO functions aligned with -O2 instead. Change-Id: Ice6781666a0834f1e8e60a0c93048ac8472f27d9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14414 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03southbridge/amd: Drop HUDSON_FWM_INSIDE_CBFSPatrick Georgi
It's unused. Change-Id: I853702e40dcab9f193b2a3de7deeec80ab1d25f0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14568 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-11sb/amd/sp5100: Apply Sx State Settings per RPR v3.02Timothy Pearson
Change-Id: Iacf84ac7de4362e523ad9d8aa7309eecd5277480 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14308 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-04-11sb/amd/sp5100: Enable CPU reset timing option per RPR v3.02Timothy Pearson
Change-Id: Ifb568ca126283e533232f52175d6147ee500220c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14307 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-04-11sb/amd/sp5100: Disable ASF legacy sensor support per RPR v3.02Timothy Pearson
Change-Id: I8628dc433e12892b0839d727165f609c8b34f66e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14306 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-04-08sb/amd/sb700: Add sb7xx_51xx_decode_last_reset()Timothy Pearson
The SB700 family has the ability to report the last reset reason. This is useful in the context of handling MCEs and recovering from fatal errors / sync floods. Add a function to retrieve the last reset flags. Change-Id: I754cb25e47bd9c1e4a29ecb6cb18017d1b7c3dc4 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14263 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-07sb/amd/sb700: Enable reset on sync floodTimothy Pearson
The logic to enable reset on sync flood per RPR guidelines somehow ended up guarded on the SATA AHCI setup. Unconditionally enable reset on sync flood per the RPR. Change-Id: I62d897010a8120aa14b4cb8d096bc4f2edc5f248 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14260 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-04-05sb/amd/sp5100: Add ehci_async_data_cache CMOS optionTimothy Pearson
SP5100 devices are affected by an erratum that can lock up the EHCI ports under certain conditions. Add an optional CMOS option to enable a workaround at the expense of performance. Change-Id: I305d23dfa50f10a3dcb5c731e8923305c8956dde Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14241 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01southbridge/amd/sb700: Enable extended APIC ID when Kconfig option setTimothy Pearson
Change-Id: I52fc2c2294edead3b5dacf397c0a1ab2e08b1e3f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13160 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01southbridge/amd/sb700: Set HPET min tick value to RPR recommendationTimothy Pearson
Change-Id: I766eca6369b60a79a6823bc744934e3f1fbc17b2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13159 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29southbridge/amd/sb700: Add CMOS option to disable legacy USB supportTimothy Pearson
Change-Id: I136c259136ce66a0c319a965ae0ee27f66dce1b3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13155 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29southbridge/amd/sb700: Add missing DMA setup step from AMD RRGTimothy Pearson
Change-Id: I412a0e5f2e0686b10a295dd7c0e9b537dc1a0940 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13154 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-12amd/cimx/sb800/pci_devs.h: Update guard #define nameMartin Roth
Change-Id: Ieae41cab97293831a0c49c3b472b9e6c62ba36c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12899 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-04sb/amd/sr5650: Correctly locate CPU MMCONFIG resourceTimothy Pearson
The code committed in GIT hash * 1eaaa0 southbridge/amd/sr5650:Add MCFG ACPI table support did not correctly locate the CPU MMCONFIG resource, leading to failures with operating systems and firmware (e.g. SeaBIOS) when the PCI extended configuration space option was activated. Due to the southbridge routing not being set up, MMCONFIG accesses were targetting DRAM and therefore the PCI devices were not being configured. The failure normally manifests as a system hang immediately after PCI configuration starts. Search for the CPU MMCONFIG resource on all domains below the root device. Change-Id: I0df2f825fef2de46563db87af78d0609ab3d8c5a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12821 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-18southbridge/amd/sr5650: Add MCFG ACPI table supportTimothy Pearson
As the southbridge largely controls the PCI[e] configuration space this patch moves the resource allocation from the northbridge to the southbridge when the extended configuration space region is enabled. Change-Id: I0c4ba74ddcc727cd92b848d5d3240e6f9f392101 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12050 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-16southbridge/amd/sb600: Update HPET base address with #defineMartin Roth
The SB600 code had the base address of the HPET hardcoded throughout. It looks like the plan was to have it be updated in ACPI if needed, but this wasn't ever implemented. The variable names being used to do this update were the same, causing an IASL warning. Because of this, the operation to update the HPET address actually did nothing. This was fine, because it didn't actually need to be updated. - Replace all that code with a #define. - Add and update some comments in the same area. Fixes IASL warning: dsdt.aml 1505: Store(HPBA, HPBA) Warning 3023 - ^ Duplicate value in list (Source is the same as Target) Change-Id: I9ba5fe226a4a464e0045ce7d3406898760df5e5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12705 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-12-13amd/[nb/fam10|sb/sr5650]: Minor cosmetic changesTimothy Pearson
Change-Id: Ia9cb4fe4f46327e38648f89da0ffce647fb118d3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12712 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-10ACPI: Fix IASL Warning about unused method for _OSI checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 22: if(CondRefOf(\_OSI,Local1)) Warning 3144 - ^ Method Local is set but never used (Local1) Change-Id: I07f49ac5a3708838d1c4a7216dfb11acc415c881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-09sb/amd/sb700: Enable watchdog timer for OS useTimothy Pearson
Change-Id: Ib0281139cafe74a22a24a377b3fdec1c59e934f3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12687 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-09amdfwtool: Hide the prefix of targetZheng Bao
Make the definitions of rules compliant with others. Change-Id: Ieef3a9c3fae5beaa1ea3e14e890cfb9145090c3b Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/12685 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-09AMD/bettong: Add missing uart.c for UARTZheng Bao
Change-Id: Ie49732c6874f2b443e314eb3412ddee054d9c0bb Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/12669 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-08sb/amd/sr5650: Allow resource allocator to assign bus numbersTimothy Pearson
At some point in the past disconnected PCIe bridges were completely disabled to work around a hang on bridge probe. This hang was resolved at some point, and the disconnected PCIe bridges should be enabled to receive a bus number per the RPR. This resolves a slew of warnings in the Linux boot log regarding invalid bridge configurations for disconnected bridge devices. Change-Id: Ic26e2d62ec5ddb9f22275c2afec7d560326263c7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12673 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-08AMD/bettong: Remove the useless period (trivial)Zheng Bao
It seems that no one add period in Kconfig. Change-Id: Ie9c585a8e6f1a73036b92b2873dc19284d82dc39 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/12668 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-12-01southbridge/amd/sb700: Fix boot hang when AHCI mode disabledTimothy Pearson
Existence of requested PCI device was not checked when enabling IDE mode on the SP5100. Fix incorrect PCI device ID and check for device existence before attempting setup. Change-Id: I726c355571b5c67c9a13995be2352601c03ab1e4 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12572 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-26southbridge/amd/sb700: Fix drifting system clockTimothy Pearson
Change-Id: I1698c9b9b1840d254115821f3c0e76b7211e9056 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12052 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-26southbridge/amd/sr5650: Use correct PCI configuration block offsetTimothy Pearson
Change-Id: I4277d1788d8f9a501399218544aa6d4d11349ccc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12049 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-24AMD/bettong: Add UART supportZheng Bao
The function delay in uart8250mem.c is not enough for hudson. I guess there are some problems in lapic_timer(). I uploaded a patch to gerrit to show the way to enable UART feature. http://review.coreboot.org/#/c/12343/4 Currently the HUDSON_UART is unchecked by default. Select HUDSON_UART to enable this feature. The UART is test at BIOS stage. Since it is not a standart UART device, the windows internal UART driver doesnt support it. I guess we need a driver to use it on windows. Change-Id: I4cec833cc2ff8069c82886837f7cbd4483ff11bb Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11749 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-24southbridge/amd/sb700: Fix mismatched FADT entriesTimothy Pearson
Change-Id: Ifa0b61678fe362481891fc015cebe08485b66fc1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12051 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-23southbridge/amd/sr5650: Hide clock configuration device after setup is completeTimothy Pearson
Change-Id: I043f2eb0993660d0a9351867eca1e73e0b2c37f1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12045 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-11-23southbridge/amd/sr5650: Add IOMMU supportTimothy Pearson
Change-Id: I2083d0c5653515c27d4626c62a6499b850f7547b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12044 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-20southbridge/amd: add support for Bolton FCHFelix Held
The Bolton FCH needs different firmware files than the Hudson FCH. A small patch to vendorcode is probably needed to make the XHCI controller work. XHCI_DEVID in pci_devs.h is probably wrong for Hudson. Change-Id: Ib81c0881979edcde717217dc89d8af415520d7e5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/9623 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-20AMD Bettong: refactor PCI interrupt tableWANG Siyuan
1. Use write_pci_int_table to write registers 0xC00/0xC01. 2. Add GPIO, I2C and UART interrupt according "BKDG for AMD Family 15h Models 60h-6Fh Processors", 50742 Rev 3.01 - July 17, 2015 3. The interrupt valudes are moved from bettong/mptable.c. All devices work in Windows 10. Change-Id: Iad13bc02c84a5dfc7c24356436ac560f593304d7 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/11746 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-11-19AMD Hudson: Use amdfwtool to integrate firmwares.Zheng Bao
Change-Id: Ie17a744b6ef4e5405b3dfcecc1deb6462220ec60 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/12435 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-15src/southbridge/amd/sr5650: Always configure lane director on startupTimothy Pearson
On the ASUS KGPE-D16 it was noted that the pin straps did not properly configure the lane director hardware, causing link training failure on NIC B. Forcing coreboot to always reconfigure the lane director on startup resolves this problem. Change-Id: I5b78cef84960e0f42cc3e0406a7031d12d21f3ad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12014 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-15southbridge/amd/sb700: Fix random persistent SATA AHCI drive detection failureTimothy Pearson
Change-Id: I4202a62217a7aaeaba07e4b994a350e83e064c9c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12001 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Fix SATA port 4/5 drive detectionTimothy Pearson
Change-Id: I01481f25189d01b6f4ed778902b2ecc4d39c7912 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Recover if AHCI disk detection failsTimothy Pearson
The SB700 silicon is somewhat buggy; if the links come up in an incorrect state after POR the silicon cannot automatically recover. If a disk fails to come online, reset the associated link and try disk detection again. Change-Id: I29051af5eca5d31b6aecc261e9a48028380eccb3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11999 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12src/southbridge/amd/sb700: Reset SATA controller in AHCI mode during startupTimothy Pearson
In AHCI mode SeaBIOS randomly fails to detect disks (AHCI timeouts), with the probability of a failure increasing with the number of disks connected to the controller. Resetting the SATA controller appears to show the true state of the underlying hardware, allowing the drive detection code to attempt link renegotiation as needed. Change-Id: Ib1f7c5f830a0cdba41cb6f5b05d759adee5ce369 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11998 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-12southbridge/amd/sb700: Do drive detection even in AHCI modeTimothy Pearson
SeaBIOS AHCI drive detection randomly fails for drives present on the secondary channel of each AHCI SATA BAR. Forcing native drive detection in AHCI mode resolves this issue. Change-Id: I34eb1d5d3f2f8aefb749a4eeb911c1373d184938 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11997 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Add option to disable SATA ALPMTimothy Pearson
The AMD Register Programming Reference states that the user should have the option to disable Active Link Power Management for two reasons. First, some drives may not function correctly with the ALPM implementation of the SP5100, and second there are some situations where low latency access is more important than the power savings created by using ALPM. Allow the user to disable ALPM if desired. Change-Id: I88055cbb4df4d7ba811cef7056c0a6ca2612fcb0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11993 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11cpu/amd: Add CC6 supportTimothy Pearson
This patch adds CC6 power save support to the AMD Family 15h support code. As CC6 is a complex power saving state that relies heavily on CPU, northbridge, and southbridge cooperation, this patch alters significant amounts of code throughout the tree simultaneously. Allowing the CPU to enter CC6 allows the second level of turbo boost to be reached, and also provides significant power savings when the system is idle due to the complete core shutdown. Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11979 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11southbridge/amd/sb700: Fix build failure from merging patches out of orderTimothy Pearson
Change-Id: Ib6d1be64691cf5a1c0b7464284fbae4e583f383e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12402 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11southbridge/amd/sb700: Disable broken SATA MSI functionalityTimothy Pearson
Change-Id: I4e0a52eb90910604f8640ad7533b5d71be6c8e20 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11983 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11southbridge/amd/sb700: Indicate iSATA/eSATA port typeTimothy Pearson
Change-Id: I8ee757d07c82c151b36def6b709163ff144d244f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11984 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11southbridge/amd/sb700: Add AHCI supportTimothy Pearson
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-06amd binaryPI: Fix usbdebugKyösti Mälkki
EHCI functions have moved. Change-Id: I47e79d3790b272b0fc322d534de733889679622b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/12264 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-11-06AGESA BiosCallouts: Remove castKyösti Mälkki
This cast only hides errors in matching the API properly. Change-Id: Ic396dfb572a50ac5ce5c1c83424e1f17f15bad1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/12270 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31southbridge/amd/sb700: Remove acpi_get_sleep_type for early CBMEMTimothy Pearson
The acpi_get_sleep_type function in SB700 ramstage is only needed for boards / CPUs that require late CBMEM initialization. Providing this function in early CBMEM-compatible boards breaks building of the ACPI S3 code due to multiple definitions of acpi_get_sleep_type. Change-Id: Ieebc2640a586812e3e2bfd410987205d64147314 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12267 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30More Hudson 64bit fixesStefan Reinauer
Change-Id: I2a6cd7ad27cb6d16dfe3267ea6fb844a5e2e20c6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11083 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30SB900 64bit fixesStefan Reinauer
Change-Id: I5ea0f9338ccdd658b5fbec72aa35b4f80d63d4f9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11084 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30SB700: 64bit fixesStefan Reinauer
Change-Id: Ib4b643441a5b887abf73cc55930ea9b01037f6ea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11085 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Hudson: Port to 64bitStefan Reinauer
Bring http://review.coreboot.org/#/c/10582/ to Hudson Change-Id: I1ba3047699c304a769215fe901dc3511bf23199d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11022 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-29amd/cimx/sb800/late.c: Add comment in `sb800_init()`Paul Menzel
Add a comment explaining what `abcfg_reg(0xc0, 0x01FF, 0x0F4)` does. This is a follow-up for commit 24501cae (AMD cimx/sb800: Initially enable all GPP ports). Change-Id: I5ac263ee088d36a7f7a2d03c1454ed647faa7147 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12190 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-29amd/sb700: clean up recommended changesMartin Roth
This patch addresses changes requested to commit 85c39a4c (southbridge/amd/sb700: Add Suspend to RAM (S3) support) - remove unused/commented out code - remove unnecessary guards around acpi_get_sleep_type() Change-Id: I2878e038d2f9f8d182615e1f4a75ddce5c45d5f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12206 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2015-10-27southbridge/amd/sb700: Add Suspend to RAM (S3) supportTimothy Pearson
Change-Id: Ic643e31b721f11a90d8fb5f8c8f8a3b7892c0d73 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-26southbridge/amd/sr5650: Add AMD Family 15h CPU supportTimothy Pearson
Change-Id: I88203907270db1a268bd377151f15c24fca1efdc Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25southbridge/amd/sb700: Add option for last power state after failureTimothy Pearson
Change-Id: Ieb27bd51dfd45dd15d24a576865d38180a07444e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12175 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-25southbridge/amd/sb700: Set up uninitialized devices in early bootTimothy Pearson
LPC decodes were not enabled, leading to a failure of POST 80 cards and similar debugging devices. Enable the relevant LPC decodes to allow debugging. Additionally, the SMBUS controllers were not properly set up. Enable both the primary and auxiliary controllers. Finally, K10 and higher CPUs were hanging during boot due to a misconfigued IOAPIC. Properly configure the IOAPIC. Change-Id: I9ffb6542ce445ac971fb81f4f554e7f1313e6a98 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12177 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Fix hardcoded printk() function names in pcie.cTimothy Pearson
Change-Id: Idf1db091f1d1e40ce2f248bc25d662cf9608b27e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12179 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Fix boot hang on ASUS KGPE-D16Timothy Pearson
Change-Id: I1d7d6715663a13ab94fd6d71808e35f0f7384d00 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11938 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700/acpi: Add IDE / SATA ASL codeTimothy Pearson
Change-Id: I507c93556dd66c3590c8ca11c06cd5b2dd7884c5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12176 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sr5650: Fix boot failure on ASUS KGPE-D16Timothy Pearson
Change-Id: Ia13ba58118a826e830a4dc6e2378b76110fcabad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11939 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-10-24southbridge/amd/sr5650: Add optional delay after link trainingTimothy Pearson
Certain devices (such as the LSI SAS 2008 controller) do not respond to PCI probes immediately after link training. If it is known that such a device is likely to be installed allow the mainboard to insert an appropriate delay. Change-Id: Ibcd9426628cacd6f88e6e3fcbc2b3eb7e3a92081 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11991 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-24amd/agesa/hudson: Add support for hiding the USB1.1-only OHCITobias Diedrich
The hudson chipset has 4 USB controllers, the fourth is USB1.1-only and (presumably) not used very often, add support for hiding it: 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) USB1 (3.0, XHCI) 00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB2 (2.0, OHCI+EHCI) 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB3 (2.0, OHCI+EHCI) 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) USB4 (1.1, OHCI only) Change-Id: I804e7852fd0a6f870dd118b429473cb06ebac9a4 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7355 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-23southbridge/amd/sr5650: Fix GPP3a link training in higher width modesTimothy Pearson
Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11990 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-10-16southbridge/amd/sr5650: Remove unnecessary register configurationTimothy Pearson
Do not hardcode the CPU downstream non-posted request limit; the value of this register is CPU family specific and is set appropriately in the corresponding CPU driver code. Change-Id: I432b942f114243cba23c9a8d916cf6d07bc4740b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11935 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-09-30AMD Bettong: Fix usb device in devicetree for Carrizozbao
Add some missing devices to device tree and header. Remove the obsolete devices. Change-Id: Ieeca06c68fe8c8eef6be4fab43193b898aebf013 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11378 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-19AMD ROMSIG: Only check location if ROMSIG is usedMartin Roth
The location of the AMD ROMSIG binary was being checked and warnings were being printed even when the ROMSIG file wasn't being used. These false warnings are avoided by moving the warnings into the block where the CBFS file for the ROMSIG is generated. Change-Id: Ie44a2ad97ff3b15df6dc9b8166992de6ed837997 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11161 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:02:56 +0000