summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
AgeCommit message (Collapse)Author
2010-10-17We currently read the CPU HT speed from HT chain 0's register.Liu Tao
Fix that to read the register from the chain where the SB chip is on. Signed-off-by: Liu Tao <liutao1980@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17Add more missing GPL-headers, fix inconsistencies in others.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5957 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Enable or disable the power button in KconfigPeter Stuge
Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Fix a stupid bug in rs780 and rs690 code.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5947 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Same applies for SB600.Rudolf Marek
Following patch enables UDMA on ALL IDE devices. The current code enables it only for primary master, which causes my DVD drive to fail under windows install and even after hard reset in linux (DMA seems lockup). The fix should not have any influence for Linux because the IDE driver will correctly reprogram this bit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5933 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Following patch fixes the boot_switch_sata_ide logic. It can swapRudolf Marek
primary / secondary IDE channel with SATA (in IDE mode). The bug was that setup was done in wrong device. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Following patch enables UDMA on ALL IDE devices. The current code enables it ↵Rudolf Marek
only for primary master, which causes my DVD drive to fail under windows install and even after hard reset in linux (DMA seems lockup). The fix should not have any influence for Linux because the IDE driver will correctly reprogram this bit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Trivial. Spelling check.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07RS780 function ProgK8TempMmioBase is setting a reservedScott Duplichan
bit in the AMD processor 'MMIO Limit Address Register'. I suspect it is because of a typo where 0x80 was entered as 0x8. If 0x80 is used, then the strap configuration register accesses become non-posted, which is how the Shiner reference BIOS does it. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5919 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
The AMD SB700 allows changing the physical USB port to be used as USB Debug Port, implement support for this. Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices currently, AFAICS. Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility. Untested, but should work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-26Only show the USB Debug Port kconfig option to the user if a mainboardUwe Hermann
is selected that uses a chipset which actually has that functionality _and_ we have code to initialize the Debug Port in coreboot (for that chipset). Also, remove the duplicate list of PCI IDs and just link to the wiki page at: http://www.coreboot.org/EHCI_Debug_Port The list is now less useful in the kconfig help as this option will only appear for those boards where it's actually supported. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Various Debug Port southbridge implementation fixes / cosmetics.Uwe Hermann
- Use PCI_COMMAND and PCI_COMMAND_MEMORY from pci_def.h instead of hardcoding their values. - SB600/SB700: Drop useless/unused SB600_DEVN_BASE and SB700_DEVN_BASE. - ICH7: Drop unused EHCI_CONFIG_FLAG and EHCI_PORTSC. - s/uint32_t/u32/. - Cosmetics, whitespace, coding style fixes and added code comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5847 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Make SB600/SB700 more similar for easier diffs (trivial).Uwe Hermann
Also fixes random whitespace issues, typos, etc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5837 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future. Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-22 Here is a proposed way how to handle the SATA PHY settings on SB700. It Rudolf Marek
consits of weak function which always exists (with defaults) and a possibility to override this with normal function in main.c. This is the other way of doing that and not using the devictree.cb. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5825 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-13Print an error and correct pci scan limits. Skip sb700 ISA DMA init if needed.Juhana Helovuo
Signed-off-by: Juhana Helovuo <juhe@iki.fi> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5805 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-08Make timer2 the default choice for TSC initialization.Patrick Georgi
For boards where timer2 is unusable, there's still the IO based initialization available using the Kconfig option TSC_CALIBRATE_WITH_IO Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Kevin O'Connor <kevin@koconnor.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5787 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Remove unused ide0_enable and sata0_enable entries from SB7xx Rudolf Marek
and SB600. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5781 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Tilapila supports both dual slot and single slot. The difference should beWang Qing Pei
detected by the existence of dev3. Some other RS780 mainboard has the same function. The patch added the function to make these boards work smoothly. Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Look for actual framebuffer size instead of hardcoding UMARudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5705 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Feature of lane reversal of AMD RS780 is tested.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5703 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03VGA code needs to be refactored before it can be compiled conditionally.Myles Watson
Revert until someone with the boards refactors it. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-02Build VGA code conditionally to avoid errors when using SeaBIOS.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5680 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-28Let Geode GX2 use geode_post_code.h just like Geode LXNils Jacobs
Also clean up gx2def.h and geode_post_code.h a little. abuild tested and boot tested on a Wyse S50. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5671 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-26This patch converts the Geode GX2 boards to CAR.Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5669 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-08get rid of even more fam10 and k8 warnings.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5659 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-07fix some more warningsStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5658 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-19Trivial. Cleaning up about the blank line.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5634 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-17Always enable parent resources before child resources.Myles Watson
Always initialize parents before children. Move s2881 code into a driver. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-09Same conversion as with resources from static arrays to lists, exceptMyles Watson
there is no free list. Converting resource arrays to lists reduced the size of each device struct from 1092 to 228 bytes. Converting link arrays to lists reduced the size of each device struct from 228 to 68 bytes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5626 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-09The interrupt controller lives at I/O 0x4d0/0x4d1.Stefan Reinauer
However on these platforms we were causing a resource conflict by letting the resource allocator start allocations at 0x400. Change the constraints to start at 0x1000 so we avoid allocating over LPT ports (0x778-0x77f), PCI (0xcf8-0xcff) and some other fixed resources that might live down there (smbus base, acpi base,...) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-07This patch extends the reserved resources for the cs5536 to avoid the excludedMyles Watson
range as detailed on p104 of the cs5536 Device Data Book. Extended to 0x1000. Same change for cs5535. Signed-off by: Edwin Beasant edwin_beasant@virtensys.com Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5618 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-04This patch replaces the headers of the following files:Frank Vibrans
src/cpu/amd/model_fxx/model_fxx_update_microcode.c src/northbridge/amd/amdk8/amdk8_acpi.c src/southbridge/amd/amd8132/amd8132_bridge.c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> http://www.coreboot.org/pipermail/coreboot/2010-June/058668.html git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-03The code was ported. Now it is what it should be.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5606 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25Move CS5535 specific setup from GX2 driver to CS5535. Stefan Reinauer
To apply this patch you need to cp src/northbridge/amd/gx2/chipsetinit.c src/southbridge/amd/cs5535/ Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5589 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25also rename the config option.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25fix most usbdebug warnings and fix function names.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25Long ago we agreed on kicking the _direct appendix because everything inStefan Reinauer
coreboot is direct. This patch does it. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5586 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-23Fix bug from r5476 re CS5536 device search during GeodeLX PCI domain enablePeter Stuge
cs5536.c:chipsetinit() is called during northbridge pci_domain_enable() which happens before scan_bus() so the device tree does not have PCI vendor/device ids yet. Let's use dev_find_slot() for now. This works only as long as the CS5536 has PCI device id 0xf in all mainboards, and a better solution is needed in case that ever changes! Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Nathan Williams <nathan@traverse.com.au> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5581 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-21Use lists instead of arrays for resources in devices to reduce memory usage.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-14license header fixes Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5545 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-30get rid of some more warnings..Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5516 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-25no warnings days.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5493 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-25zero warnings daysStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5492 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-23zero warnings days...Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5484 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-22None of the cs5536 settings in devicetree.cb were ever used and nobody noticed.Stefan Reinauer
Fix it! Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5476 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-22fix compilation remaining geode boardsStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5475 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
* integrate vsm init into normal x86.c code (so it can run above 1M) * call void main(unsigned long bist) except void cache_as_ram_main(void) on Geode LX (as we do on almost all other platforms now) * Unify Geode LX MSR setup (will bring most non-working LX targets back to life) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-20As Myles suggested a while back: Switch long time #warnings to be commentsStefan Reinauer
only. Keeping them as #warnings will not likely that they're fixed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5459 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-16fix up sb600 and it8712f tree.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5449 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-15remove more warnings. move ROOT_COMPLEX selection to fam10Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5447 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-14zero warnings days. Down to under 600 different warnings Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-09zero warnings days.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-09zero warning days.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-07no warnings dayStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-06No warnings day, next round.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-05Add RS785G, looks like it works although it is RV620.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5356 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-02remove more warnings.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-02remove some more warningsStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
Only some assembler files still have \r\n ... Can we move that part to C completely? Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-28drop __ROMCC__ define checks.. __PRE_RAM__ is what the code should be ↵Stefan Reinauer
looking for. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5306 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-23fix newly introduced printk_foo warnings..Stefan Reinauer
Interesting enough, console_printk was only used in a single place and duplicated a large part of console.h which is included in the same place. Thus, just drop console_printk.c and we're one down with console complexity Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5274 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-23Remove the building warnings.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5273 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-23Remove the building warnings.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5272 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-23Removing build warning of sb600 & rs690.Wang Qing Pei
Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5271 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22Fix all the format string warnings.Myles Watson
Some other random warnings. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5268 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-19I ran into a couple of errors while building a mahogany_fam10 target;Ed Swierk
CONFIG_CAR_FAM10 was renamed some time ago to CONFIG_NORTHBRIDGE_AMD_AMDFAM10, and l3Cache() is actually defined as l3_cache(). Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-18trivial. Delelte double blank line.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-17more warnings gone...Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5254 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-17trivial warning fixes, mostly for ACPI codeStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5251 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-17The SB600 also has the BootFailTimer. We should disable it,Zheng Bao
otherwise it will keeps reboot. The comment was also added in detail to make less confusing when we debug SB600/SB700. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5240 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-17remove warnings from cs5530 driver. (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16pci drivers should be const.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5229 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16Delete Config.lb in new southbridge folders.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16Add entries of RS780, SB700, Mahogany, Mahogany_fam10 into theZheng Bao
Makefile and Kconfig. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16Features supported in RS780 code:Zheng Bao
* PCIe initialization. * Internal Graphics initialization. * HT Link initialization. It works in HT1 or HT3 mode. Note: 1. I tried to add the description of every step to the code. For example, if it is made based on rpr, section 2.4.5, I will pasted the words from 2.4.5 to the c code. But the document I worked with might be different with the most updated one. A new section has been added and the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I correct every comment if I met one. But I have to confess that I am so reluctant to find out everyone. I believe it will be correct in the long run. 2. The interanl graphics part is done by Libo Feng <libo.feng@amd.com>. 3. There is a conflict between RPR and our CIM code. Please see the comment in switching_gppsb_configurations in rs780_pcie.c. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16Features supported in SB700 code:Zheng Bao
* SATA initialization. * USB initialization. * HDA initialization. * LPC initialization. * IDE initialization. * SMBUS initialization. Note: 1. I tried to add the description of every step to the code. For example, if it is made based on rpr, section 2.4.5, I will pasted the words from 2.4.5 to the c code. But the document I worked with might be different with the most updated one. A new section has been added and the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I correct every comment if I met one. But I have to confess that I am so reluctant to find out everyone. I believe it will be correct in the long run. 2. I only test the SATA port 0-3. The ports 4, 5 are "PATA emulations". I am confused about it. 3. This patch is not only about SB700. Actually it should be SB7x0. But I dont think it is nice to change everything to SB7x0. It is ugly, isn't it. As far as I know, they all use the same code with revision checking. If you guys think it is appropriate, please modify it to sb7x0. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-09sb600 has problems with the virtual wire mode setup in setup_ioapic(). It ↵Marc Jones
causes problems when interrupts are enabled (specifically timer). Previously the sb600 setup was equivalent to clear_ioapic(), so that is what we will do for now. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-09Port of CS5536 early UART setup from v3.Edwin Beasant
Permit early setup of COM2 Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07newconfig is no more.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-03The UART2 on the AMD cs5536 is incorrectly configured in two places.Stefan Reinauer
GPIO lines 4 and 3 are swapped and also incorrectly put in IR mode receive (compound fault). Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Edwin Beasant <edwin_beasant@virtensys.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-27reformat Kconfig file, too.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5060 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-27Add the MSR writes that are needed to provide VGA legacy routing for the ↵Edwin Beasant
Geode LX Add appropriate Kconfig defines to provide 8mb of VGA ram allocation Add the Kconfig defines to cover TSC calibration from TIMER2 and UDELAY setup Two small warning removals about excessive prototyping. Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5059 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
from mainboards. Some adaptations were necessary after the IOAPIC cleanup, so this should fix the build. Fix intel/d945gclf build, which was missing some ACPI component. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-16coreboot has 13 instances of IOAPIC setup distributed across a lotStefan Reinauer
of components. This patch is a rewrite of the generic IOAPIC setup code. Additionally it drops the other 12 instances of IOAPIC setup code and makes the components use the generic code. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-16coreboot used to have two different "APIs" for memory accesses:Stefan Reinauer
read32(unsigned long addr) vs readl(void *addr) and write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr) read32 was only available in __PRE_RAM__ stage, while readl was used in stage2. Some unclean implementations then made readl available to __PRE_RAM__ too which results in really messy includes and code. This patch fixes all code to use the read32/write32 variant, so that we can remove readl/writel in another patch. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-12-31romcc:Patrick Georgi
- Set __PRE_RAM__ define per default - Properly handle ignored (#ifdef'd out) #include lines amd/serengeti_cheetah_fam10: - write ACPI files to $(obj) instead of the top dir (alias $(CURDIR)) tinybootblock: - provide a way to define code that should be added to the bootblock, to map the entire ROM for use by CBFS amd/model_fxx, amd/model_10xxx: - add CONFIG_SSE walkcbfs.S: - eliminate the use of two registers, to make space for romcc to wiggle amd/serengeti_cheetah_fam10: - use the enable_rom framework. not entirely functional yet Boot-tested on emulation/qemu-x86 Build-tested on amd/serengeti_cheetah_fam10 amd/serengeti_cheetah_fam10 fails in amdht/ somewhere, but builds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
Since we have CBFS setting rom_address in board files is no longer necessary. Also, drop vga_rom_address from RS690 completely, it was never used in the code. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4923 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06Split the two usages of __ROMCC__:Myles Watson
__ROMCC__ now means "Don't use prototypes, since romcc doesn't support them." __PRE_RAM__ means "Use simpler versions of functions, and no device tree." There are probably some places where both are tested, but only one is needed. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise theZheng Bao
VGA ROM can not run. After make, run > ./cbfs/cbfstool ./coreboot.rom add ../vga_bios.rom pci1002,791f.rom optionrom to make the final image with vga bios. The macro vga_rom_address is out-of-date when CBFS starts play its role. it also should be eliminated from rs690/chip.h as below. But it will cause building error on other board, which I cant make test on. ## Index: src/southbridge/amd/rs690/chip.h ## =================================================================== ## --- src/southbridge/amd/rs690/chip.h (revision 4782) ## +++ src/southbridge/amd/rs690/chip.h (working copy) ## @@ -23,7 +23,6 @@ ## /* Member variables are defined in Config.lb. */ ## struct southbridge_amd_rs690_config ## { ## - u32 vga_rom_address; /* The location that the VGA rom has been appened. */ ## u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */ ## u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */ ## u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */ ## Don't apply above patch about rs690/chip.h before every board has been fixed. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-14delete white trailing spaces. It is done by the perl command.Zheng Bao
sh> perl -pi -e 's/[[:blank:]]+$//' $files Trivial. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-13This patch support for the Technexion Tim-5690 mainboard.Libra Li
It's an embedded AMD RS690/SB600 mainboard. http://www.technexion.com/index.php/tim-5690 Myles added Kconfig support. Signed-off-by: Libra Li <libra.li@technexion.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09Remove default n statements to simplify .config and ldoptions files.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4753 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-08Fix CS5535 build for kconfig, more kconfig boards (lippert, artec)Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 20:22:32 +0000