summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
AgeCommit message (Collapse)Author
2012-07-24cs5536: add smbus support in ramstageChristian Gmeiner
With this patch it is possible to use the smbus in ramstage. The biggest part of the patch is a simple code split into a general part (smbus.h) and the concrete users (early_smbus.c and cs5536.c). After the switch from romstage to ramstage the smb base address has changed, but that is no problem as the new base address is stored in bar0 of the ISA bridge. It could also be read via msr, but via PCI it is simpler. I used the following patch as reference on how to readout the new base address: http://lists.laptop.org/pipermail/commits-kernel/2006-November/000178.html Change-Id: I9f86a1e474368c62f9ed3a95edfb3e63117aa156 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1243 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-22Trinity wrapper code improvement.zbao
Set the default location of hudson firmware to 3rdparty. Move UMA code from mainboard to northbridge. Change-Id: I11afea0c7fd04aa84a629dc762704c42baf002df Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1241 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-14AGESA F15 wrapper for Hudson.zbao
Hudson code has been integrated from CIMx to AGESA. This patch is about the wrapper. Change-Id: I63d951982140b82a3a77a97eb3d55fc75fc0caa3 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1157 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-03Fix AMD S3 block generator on CygwinPatrick Georgi
awk on Cygwin created the UTF-8 value for the 0xff code point, which makes it two bytes wide. This broke the build. Change-Id: I4937ae7ce1136ba7a76d05b42f9dd2771203175d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1164 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-03AGESA F15 wrapper for Trinityzbao
The wrapper for Trinity. Support S3. Parme is a example board. Change-Id: Ib4f653b7562694177683e1e1ffdb27ea176aeaab Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1156 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-12Update SB800 CIMX FADTMartin Roth
- Add #define to allow the FADT PM Profile to be overridden. - Change the location of the PMA_CNT_BLOCK_ADDRESS to match current documentation. - cst_cnt should be 0 if smi_cmd == 0 - add a couple of default access sizes. - Add a couple of #define values for unsupported C2 & C3 entries. - Add PM Profile override value into amd/persimmon platform. This does not use the #defines in acpi.h so that the files that include this don't all need to start including acpi.h. Change-Id: Ib11ef8f9346d42fcf653fae6e2752d62a40a3094 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1055 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-24cbtypes.h: Unify cbtypes.h used in AMD board's codeVikram Narayanan
Remove all the repeated sections of code in cbtypes.h and place it in a common location. Add include dir in vendor code's Makefile. Change-Id: Ida92c2a7a88e9520b84b0dcbbf37cd5c9f63f798 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/912 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-15Fix fadt legacy free setting.Marc Jones
The fadt legacy free logic was backwards. Change-Id: Ieb21ef335f7514ced70248d0bf8668ddb73cf59f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1030 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-05-12Add legacy free setting and override to fadt.cMarc Jones
The FADT iapc_boot_arch indicates the available information for accessing legacy devices. By default, the setting supports legacy. LEGACY_FREE and/or the iapc_boot_arch field may be customized. Change-Id: I5679741e1f8db923d3c00b57f6a5d813550f3a5e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1024 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-12Merge sb800 fadt fixes from South Station mainboard to southbridge fadt.Marc Jones
The South Station recieved updates that fix a number of fadt problems. South Station now uses the southbridge fadt. Change-Id: Ib990a69a359a4b7eae3431bb4323acd537acda1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1021 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-10Unmark source files as executablesAlec Ari
Change source file modes from 755 to 644 The following files have been grepped for changes: *.c *.h *Kconfig* *Makefile* Change-Id: I275f42ac7c4df894380d0492bca65c16a057376c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1023 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-09Move fadt.c to the cimx sb800 southbridge directory to be shared.Marc Jones
The fadt.c is the same across all the platforms using the sb800 cimx southbridge wrapper. Change-Id: Ifbbfc238732aa46aef96297eaa188b77d27151f3 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1019 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-09Add simple PMIO & PMIO2 read/write routines to CIMX wrapperMartin Roth
These are the PMIO & PMIO2 read & write routines from src/southbridge/amd/sb800/sb800.c & sb800.h for use in the cimx tree. Currently most platforms using CIMX are calling WritePMIO() directly from the src/vendorcode/amd/cimx/sbX00 directories instead of using a wrapper function. These functions only do byte reads & writes. Change-Id: I881a6e2d4ddbba3dbdf4dd33e06313fe88b3682a Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/981 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Some more #if cleanupPatrick Georgi
Replace #elif (CONFIG_FOO==1) with #elif CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]1),\1\2,g" {} + (manual tweak since it hit a false positive) Replace #elif (CONFIG_FOO==0) with #elif !CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]0),\1\!\2,g" {} + Change-Id: I8f4ebf609740dfc53e79d5f1e60f9446364bb07d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1006 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-19Do not produce temp s3.rom if the board doesn't need it.zbao
S3.rom is useless for all the other boards which don't use flash to save sleep/wakeup settings. AGESA-based boards other than persimmon haven't been validated the S3 resume. They don't need S3.rom yet. Change-Id: I12693e9556ca6f8e0d80b2ab2dca5c85bdb97685 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/902 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-17More portable s3 scratch space creationPatrick Georgi
echo -n isn't portable. echo -e isn't portable. that bash loop isn't portable. So let's try something else. Change-Id: Ie73aa1c09d90c11a5c4952a332d4c2058390b5db Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-12Add Southbridge support for S3.zbao
1. Add some CIMX call for S3. 2. Detect sleep type. Change-Id: I62888e8d8a03987ca88f5c935fa660f6b49a4fe9 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/621 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-12Unify IO APIC address specificationPatrick Georgi
Some places still hardcoded the address instead of using IO_APIC_ADDR. Change-Id: I3941c1ff62972ce56a5bc466eab7134f901773d3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-02Add sb800 spi support.zbao
It is for S3, storing the recovring data in the nonvolatile storage, i.e., flash. Change-Id: Ie9e4f42a80c93d92d2e442f0e833ce06d88294f9 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/620 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-07Move C labels to start-of-linePatrick Georgi
Also mark the corresponding lint test stable. Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-29AMD southbridge: remove sp5100Kyösti Mälkki
Southbridge SP5100 support was compiled with SB700 code, but static device info structure would use sp5100/chip.h. To solve this drop support for separate chip sp5100 and adjust the relevant Kconfig options. Removes chip directory: src/southbridge/amd/sp5100/ Rename Kconfig option from: SOUTHBRIDGE_AMD_SP5100 to: SOUTHBRIDGE_AMD_SUBTYPE_SP5100 Change-Id: I873c6ad3624ee69165da6ab7287dfb7e006ee8e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/679 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-22amd/sb600: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I16b27e40ca1a201b2f968f8ce303eaafe43804c0 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/660 Tested-by: build bot (Jenkins)
2012-02-20Force SB600 bootblock to use I/O for PCI configDave Frodin
If PCI config cycles use MMIO instead of I/O in the SB600 bootblock code the cycles will go nowhere since the MMIO feature hasn't been configured yet. This change forces the cycles to use I/O and configures the southbridge decode range to what is defined by the mainboards Kconfig. Change-Id: I85297237f32f37b3fc1ff5b488cca0a43bcf20fd Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/632 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Force SB700 bootblock code to use I/O for PCI config cycles.Dave Frodin
If PCI config cycles use MMIO instead of I/O in the SB700 bootblock code the cycles will go nowhere since the MMIO feature hasn't been configured yet. This change forces the cycles to use I/O and configures the southbridge decode range to what is specified by the mainboards Kconfig. Change-Id: I15a89a27645edf594d14ef20f129f75a315e9672 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/631 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Force SB800 bootblock to use I/O for PCI configDave Frodin
If PCI config cycles use MMIO instead of I/O in the bootblock code the cycles will go nowhere since the MMIO feature hasn't been configured yet. This change forces the cycles to use I/O. Change-Id: I93dec45f7cd6764cef7736c774a4d4e61bf7d7e0 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/630 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Fixes Fam10/SR5650 cpu not recognized message.Dave Frodin
Extend the Family10 revisions checked byt the printk message. Change-Id: Ia94daeefb1aabfb128c577b1e0aa52cf63d5cf44 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I7a7a1919b7a555156b8da21e8db7dd8f682d68e1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/661 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17amd/sb800: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. (cimx/sb800 is a "different" chipset) Change-Id: If7cf2a141a1f2df60f687c51fbd760aa405c8480 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/666 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17amd/amd8111: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree amd8111-using board has it not selected, so move selection from boards to southbridge. Change-Id: Iabbaa4cd2fd367ed6decec7ef5cdcbae3b264d52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/654 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-02-16SB700 southbridge: AMD SB700/SP5100 southbridge CIMX wrapperKerry Sheh
Change-Id: If924b7eb176e7d3d82fa394929b653b1ced3a743 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/561 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-02CIMX wrapper: remove redudant traversing sb800 and sb900 CIMX dirKerry Sheh
AGESA and CIMX build changed from commit 2a830d0b, sb800 and sb900 CIMX dir already traversed in vendorcode Makefile. Change-Id: I5101b22e140725337bf5074b9170e582c8e3bf40 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/602 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-08rs780: correct comment in switching_gpp_configurations()Jonathan A. Kollasch
Change-Id: I6417a92523eea7307d080669fbc4e16ee28c8a6c Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/524 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-05rs780: use bitwise rather than boolean notJonathan A. Kollasch
Change-Id: Ie3872c57990f9784aafda14f8c7fc842b3a65260 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/518 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-01-05rs780: power down GPPSB SB lane pads in correct PCIe coreJonathan A. Kollasch
Change-Id: I059d5b155cae051f31cc2495f8a47d53e01af808 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/519 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-21Persimmon audio codec verb patch.Marc Jones
Verb data is required for the HDA audio codec in the sb800 southbridge. Verb data is not required for mainboards that use G-Series HDMI. It is also a setting the may be boards specific. This fixes issues with Windows audio on Persimmon. Change-Id: I067506871e92078d122cf79872363d8937d47e50 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/490 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-06Fix AMD 8132 and 8151 southbridge buildsKyösti Mälkki
Untested, changes ramstage build for boards: supermicro/h8qme_fam10 amd/serengeti_cheetah amd/serengeti_cheetah_fam10 AMD 8132 was not built for any mainboard due to a typo. AMD Serengeti Cheetah: Chip 8151 is referenced in devicetree.cb but was not built. AMD Serengeti Cheetah Family10: There are indications the board has 8151, but it is not listed in the devicetree.cb. The 8151 chip is not added in the build. Change-Id: I03acdfcc3f3440bd32e81a9a696159903bbbcb50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/471 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-12-05RS780: print the vgainfoDenis 'GNUtoo' Carikli
With this commit the vgainfo is printed and looks like that on the serial console: vgainfo: ulBootUpEngineClock:50000 ulBootUpUMAClock:66700 ulBootUpSidePortClock:0 ulMinSidePortClock:0 ulSystemConfig:0 ulBootUpReqDisplayVector:0 ulOtherDisplayMisc:0 ulDDISlot1Config:0 ulDDISlot2Config:0 ucMemoryType:0 ucUMAChannelNumber:1 ucDockingPinBit:0 ucDockingPinPolarity:0 ulDockingPinCFGInfo:0 ulCPUCapInfo: 2 usNumberOfCyclesInPeriod:0 usMaxNBVoltage:0 usMinNBVoltage:0 usBootUpNBVoltage:0 ulHTLinkFreq:20000 usMinHTLinkWidth:8 usMaxHTLinkWidth:8 usUMASyncStartDelay:100 usUMADataReturnTime:300 usLinkStatusZeroTime:600 ulHighVoltageHTLinkFreq:20000 ulLowVoltageHTLinkFreq:20000 usMaxUpStreamHTLinkWidth:8 usMaxDownStreamHTLinkWidth:8 usMinUpStreamHTLinkWidth:8 usMinDownStreamHTLinkWidth:8 Change-Id: I17c2a13ab52a0f78588f812d4f42f45f9a7b7524 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/456 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-31Fix usb debug dongle supportSven Schnelle
- move enable_usbdebug() declaration to usbdebug.h - reinitialize debug driver in ramstage, as copying the data structure from romstage doesn't work right now. This way of copying data from romstage to ramstage is really board/cpu specific, and is likely to break often. So don't do it. Change-Id: I394678ded6679c1803e29eb691b926182bdcab68 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30Fix gcc 4.6.1 breakage of southbridge/amd/sr5650/pcie.c.Stefan Reinauer
Change-Id: I3ccb3860207e1b3ccac4313f7b537c434af5166f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/360 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28sb600: Implement EHCI workaroundPatrick Georgi
Linux implements it itself, but older Linuxes and other systems might not. Without this, the host controller might not respond to drivers. Change-Id: I4ff0e3683c02e7aa00d188428847c64c4c5d589d Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/345 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-27Added smbus block read/write for amd8111Oskar Enoksson
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: I86c80a27fd13c9a2be4034fdfb63be4ab2fadbfc Reviewed-on: http://review.coreboot.org/281 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-23SB800: Hide unused gpp portsKerry Sheh
Add configure option SB_GPP_UNHIDE_PORTS for mainboard to hide/unhide the unused sb800 gpp ports. Certain gpp port should be hidden, if no device was detected and hotplug feature is disabled for such port. Hidden unused ports makes lspci -vvv get more accurate information under Linux. Test on avalue/eax-785e mainboard. Change-Id: I1d7df0f2ab6ad69b1b99b8bf046411ae7cdb09c0 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-15AMD CPU and chipset fixes for compilation with gcc 4.6Stefan Reinauer
Change-Id: I05b08765b38d8d6cc9b7cbdaf87c127b33408c81 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/266 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14Fix AMD SB800 (cimx) southbridge code to compile with gcc 4.6Stefan Reinauer
Change-Id: I672135a9b6e3b641ceb655cb00d40ee760c17edc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/268 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-13amd/sb600: Enable COM2 at all times in early setupPatrick Georgi
Otherwise with a coreboot log on COM2 (which doesn't work) the boot process takes eons. Change-Id: I886f98b715c1f384c8693f2977671ff15897b5a5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/241 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-10-12SB800 RAID: add kconfig option RAID_MISC_ROM_POSITIONKerry Sheh
SB800 RAID ROM require to put the misc ROM to specific position, this patch enable user to put the RAID misc ROM to the right place in the coreboot image. Change-Id: I4fc64df8e091fb0cccd063826ab31a4f198942d1 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/249 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
In order to make sure AHCI/RAID ROM works correctly For SB800_SATA_AHCI or SB800_SATA_RAID mode, SATA should enable bus master and the ahci also should be enabled. Change-Id: I9d9c557816d364d8373fe343860ad5fe45988200 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/248 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12sb800: Add Kconfig option ENABLE_IDE_COMBINED_MODEKerry Sheh
Add this option to enable/disable SATA IDE Combined Mode feature Change-Id: I1ab8acd27947a71baf954f44d0741f81f48e5541 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/231 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11mainboard: complete the sb800 devicetree even device is offKerry Sheh
sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. Change-Id: I76ebad842e90b0f740abbec031165d7c39a80abf Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/230 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11sb800: Add sata ahci/raid mode kconfig optionKerry Sheh
If sb800 sata was configured as ahci or raid mode, give the option to add ROM files. Change-Id: I87a7814930ce3a7c38cde1e235d151223eea2107 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/225 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD SB800 early console use fixefdesign98
This change removes printk's that occur before console init is called. In the best case, these would cause an extremely slow boot, and in the worst case would cause a complete post failure. Change-Id: I50388e71225e95db602aa45835c39126c1c920a3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/216 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14rs780: hide unused gfx ports and gpp portsKerry Sheh
Hide the unused gfx ports and gpp ports if they are not configured as hotplug. lspci -vvv will get more accurate information under Linux, tested on avalue/eax-785e. Change-Id: Iaabfd362a0a01f21d0f49aa2bd2d26f9259013fb Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-07AMD SB800 southbridge updateKerry She
This patch enables access to the registers of the hardware monitor logical device in the superio via isa ports 0x295/0x296. Previously this was not enabled in the SB8xx LPC device. This is required for initialisation in init_hwm() in src/superio/winbond/w83627hf/superio.c and also by OS-level sensor monitoring such as lm-sensors to access temperature, fan monitoring and control and voltage registers. asrock/e350m1 and advansus/a785e-i mainboard changes are included herein. Change-Id: I2176885549277b335c0c41b48457d09b9b76b703 Signed-off-by: Per Hansen <perh52@runbox.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/159 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-04Adjust some code/comment of sb700 sata initWang Qing Pei
The inline comment of sata_init function seems not placed correctly. Rearrange it. Change-Id: I63480da60e51cdc68e64c302ad2d8a6197e288f6 Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/186 Tested-by: build bot (Jenkins)
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-14Move AMD SB800 early clock setup.Scott Duplichan
Move the AMD SB800 early clock setup code that is needed for early serial port operation from mainboard/romstage.c to sb800/bootblock.c. This prevents code duplication and simplifies porting. Change-Id: I615cfec96c9f202d9c154dc6674ec7cbcf4090c3 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/96 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-14Set SB800 ROM decode size based on kconfig.Marc Jones
Change-Id: I46ea26b5534064fe1c7e2ce2b2f12cacf18a4d4d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/94 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
sb800 pci bridge SHOULD enabled by default according to the chipset document, but actually not enabled on some mainboard. enable sb800 pci bridge when told to enable in devicetree.cb. tested on ibase persimmon mainboard. Change-Id: I42075907b4a003b2e58e5b19635a2e1b3fe094c3 Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/63 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20sb800: move spi prefetch and fast read mode to sb bootblock.Stefan Reinauer
So we don't waste time on the first cbfs scan. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> [adapt persimmon with the same change, and work around romcc bug in bootblock code: it doesn't like MEMACCESS[idx] |= value;] Change-Id: Ic4d0e53d3102be0de0bd18b1b8b29c500bd6d997 Reviewed-on: http://review.coreboot.org/9 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-19ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nicScott Duplichan
Scott Duplichan's patch from the mailing list: sb800 cimx wrapper: Run the complete sb800 cimx sbBeforePciInit() function once, after determining device 0x15 function enables. 1) Update the asrock e350m1 devicetree.cb to match the hardware. 2) Change the way the sb800 cimx wrapper code works. The original cimx code calls sb800 cimx function sbBeforePciInit() once. When ported to coreboot, the gpp component of this function was called once for each gpp port, as the gpp port's enable/disable state became known. A 05/15/2011 change makes the early gpp code run only once, triggered by processing the 4th gpp port. This method is not general enough because the 4th gpp port is not enabled on all boards. With the current change, the early gpp code runs when the first gpp port is processed. If any gpp ports are enabled, the first must be enabled. Tested with Win7 and linux on asrock e350m1. This change will also affect amd inagua, and has not been tested on that board. Change-Id: I93d44c216bfcab3c3a8fbb79d23dab43a65850e6 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/44 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-09Revert changes to set the sb800 to AHCI mode.Marc Jones
Seabios doesn't have this support included yet, which causes the generic Persimmon and other CIMx sb800 platforms to not boot. Change-Id: If07328b7c62d7fc314647adce8fab983ed327854 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/14 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-07re-indent, so files conform to coding guidelines.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: If840164fa0e2b6349ba920edf06386ba1fe08aab Reviewed-on: http://review.coreboot.org/8 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-01trivial remove blanks at the end of lineKerry She
Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Kerry She <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6614 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-01This patch fix a AMD sb800 wrapper compile warning:Kerry She
src/southbridge/amd/cimx_wrapper/sb800/late call clear_ioapic but not include the prototype declare header file. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-16cimx_wrapper/sb800: Fix indent in late.c:sb800_enable()Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6597 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Update gpp port configuration.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6592 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Program the I/O APIC ID.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6580 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Enable AHCI mode and hide IDE controller to reduce boot time.Scott Duplichan
Note: enable AHCI in seabios and apply seabios patch: http://www.mail-archive.com/seabios@seabios.org/msg00437.html Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6579 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Configure CIMx to use 33 MHz fast mode for SPD read.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-07RS780 DDI Lanes configure support,Kerry She
and remove RS780 get_cpu_rev(). Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-07SB800 CIMX code can share the AGESA V5 lib code,Kerry She
some platform only use sb800 cimx code, not use AGESA v5 code. for such platform, one can compile the sb800 cimx and AGESA v5 lib code. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6559 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-20drop dead code from sb800 bootblockStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19Fix some more misuses of ifdef/if definedStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6515 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-12Use TOM2 for highest sysmem setting for northbound memory routing (DMA). ↵Marc Jones
This fixes 4GB memory issues. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Kerry she <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6488 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html It's about time we follow this advice. Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and drop unused CPP define Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add the SR5650 & SP5100 to the Kconfig and Makefile.incZheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
Since the SB700 has changed to sb7xx_51xx, change legacy name in other mainboard. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-27Add AMD SR56x0 support.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6462 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Fix power_on_after_fail handling on AMD SB600Josef Kellermann
Bit 0 of pm reg#74 have to be set turn on system after power resumes. See '42661_sb600_rrg_nda_3.02.pdf' (or '46155_sb600_rrg_pub_3.03.pdf') for details, look for 'PwrFailShadow'. [Patrick: I didn't include the get_options reorganization as get_option doesn't overwrite "on" if power_on_after_fail isn't found in CMOS. Style changes were also left out.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26It adds support for automatic PSS object generation for AMD pre fam Fh CPU. ↵Rudolf Marek
Those CPUs require a hardcoded table, which I managed to rewrite during one particularly boring flight. Too pity it is only for Opteron CPUs. Someone needs to finish the second PDF for All others Athlons and Semprons. Also it enables the FID/VID changes in SB. Jakllsch had some troubles with that too but on am2 CPU. Those bits are only documented in SB600. They arent in RRG RPR and BDG. Signed-off-by: Rudolf Marek <r.marek@asssembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Add new option 'sata_mode' to CMOS and 'SATA_MODE' to Kconfig for AMD SB600Josef Kellermann
coreboot used to set the chipset to IDE mode unconditionally. Now, the user has a couple of ways to choose the configuration: - If a CMOS variable sata_mode exist, it is used to decide if IDE or AHCI is to be used as interface. - If not, a Kconfig option is used. - If unchanged, the Kconfig option is set to IDE. So unless the cmos.layout is extended or Kconfig is modified, this won't change behaviour. [Patrick: Compared to Josef's version, I changed the Kconfig option to be boolean, instead of a magic string. Also, the "IDE" default is handled in Kconfig, instead of an additional line of code.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6379 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15SERIAL_POST was renamed to CONSOLE_POST a while agoStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Removed LPC DMA Deadlock workaround...Josef Kellermann
Setting bit#21 in k8_f0#68 is part of the errata#169 which is handled in amdk8/coherent.c Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 This code provides southbridge initialization for SB800 south bridges. It ↵Frank Vibrans
is dependent on the AMD CIMx/SB800 code. Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-12Attached patch fixes the LPC decode ranges of SB600/SB800. We enable early ↵Rudolf Marek
only Serial/SIO/RTC. Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only... Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc... Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad. Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded. While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6343 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10RS690: Provide support for MMCONF.Josef Kellermannseppk
If enabled, set up 0xe0000000..0xf0000000 as MMCONF area. Must still be configured in per-board ACPI for the OS to pick it up, so it's disabled by default. Signed-off-by: Josef Kellermann<seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-03Fix subvendor/subdevice programming on RS690Josef Kellermann
Some RS690 devices require subvendor/subdevice IDs to be programmed at locations other than default 0x2c. Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6330 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-28Attached patch fixes the LPC decode ranges of SB700. We enable early only ↵Rudolf Marek
Serial/SIO/RTC. Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only... Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc... Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad. Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded. While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6316 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-28Fix Bimini buildStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6307 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 21:28:52 +0000