summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
AgeCommit message (Expand)Author
2011-09-07AMD SB800 southbridge updateKerry She
2011-09-07AMD F14 southbridge updateKerry She
2011-09-04Adjust some code/comment of sb700 sata initWang Qing Pei
2011-07-22Update AMD SR5650 and SB700efdesign98
2011-07-14Move AMD SB800 early clock setup.Scott Duplichan
2011-07-14Set SB800 ROM decode size based on kconfig.Marc Jones
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
2011-06-20sb800: move spi prefetch and fast read mode to sb bootblock.Stefan Reinauer
2011-06-19ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nicScott Duplichan
2011-06-09Revert changes to set the sb800 to AHCI mode.Marc Jones
2011-06-07re-indent, so files conform to coding guidelines.Stefan Reinauer
2011-06-01trivial remove blanks at the end of lineKerry She
2011-06-01This patch fix a AMD sb800 wrapper compile warning:Kerry She
2011-05-16cimx_wrapper/sb800: Fix indent in late.c:sb800_enable()Peter Stuge
2011-05-15Update gpp port configuration.Scott Duplichan
2011-05-15Program the I/O APIC ID.Scott Duplichan
2011-05-15Enable AHCI mode and hide IDE controller to reduce boot time.Scott Duplichan
2011-05-15Configure CIMx to use 33 MHz fast mode for SPD read.Scott Duplichan
2011-05-07RS780 DDI Lanes configure support,Kerry She
2011-05-07SB800 CIMX code can share the AGESA V5 lib code,Kerry She
2011-04-21more ifdef -> if fixes.Stefan Reinauer
2011-04-21more ifdef -> if fixesStefan Reinauer
2011-04-20drop dead code from sb800 bootblockStefan Reinauer
2011-04-19Fix some more misuses of ifdef/if definedStefan Reinauer
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
2011-04-12Use TOM2 for highest sysmem setting for northbound memory routing (DMA). This...Marc Jones
2011-04-11Unify use of post_codeAlexandru Gagniuc
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
2011-03-28Add the SR5650 & SP5100 to the Kconfig and Makefile.incZheng Bao
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
2011-03-27Add AMD SR56x0 support.Zheng Bao
2011-03-17Fix power_on_after_fail handling on AMD SB600Josef Kellermann
2011-02-26It adds support for automatic PSS object generation for AMD pre fam Fh CPU. T...Rudolf Marek
2011-02-24Add new option 'sata_mode' to CMOS and 'SATA_MODE' to Kconfig for AMD SB600Josef Kellermann
2011-02-15SERIAL_POST was renamed to CONSOLE_POST a while agoStefan Reinauer
2011-02-14Removed LPC DMA Deadlock workaround...Josef Kellermann
2011-02-14 This code provides southbridge initialization for SB800 south bridges. It is...Frank Vibrans
2011-02-12Attached patch fixes the LPC decode ranges of SB600/SB800. We enable early on...Rudolf Marek
2011-02-10RS690: Provide support for MMCONF.Josef Kellermannseppk
2011-02-03Fix subvendor/subdevice programming on RS690Josef Kellermann
2011-01-28Attached patch fixes the LPC decode ranges of SB700. We enable early only Ser...Rudolf Marek
2011-01-28Fix Bimini buildStefan Reinauer
2011-01-27Trivial. Re-indent the code.Zheng Bao
2011-01-27Set the phy via weak function.Zheng Bao
2011-01-25Set the SB800 SATA PHY correctly.Zheng Bao
2011-01-24Change fadt revision back to 3.Zheng Bao
2011-01-21Now bimini can boot linux to login.Zheng Bao
2011-01-20S3 feanture of SB800. Compiliant with SB700.Zheng Bao
2011-01-20Move some board specific functions to sb800.h.Zheng Bao
2011-01-20This sb800 code is derived from sb700.Zheng Bao
2011-01-18remove the code which is not ready to release.Zheng Bao
2011-01-18remove the code which is not ready to release.Zheng Bao
2011-01-12drop unused filesStefan Reinauer
2011-01-11change a readable way to fix SB800 CIMX "multi-character constant warning".Kerry She
2011-01-01src/southbridge/amd/cimx_wrapper: Run dos2unix on the files.Uwe Hermann
2011-01-01AMD SB800: Drop component prefix from filenames.Uwe Hermann
2011-01-01Add AMD SB800 southbridge support via cimx_wrapper.Kerry She
2010-12-31Add RS785(RS880) support. Just few pci_ids.Zheng Bao
2010-12-30Remove duplicated GX2 processor IIOC mode setting on CS5535 southbridge codeNils Jacobs
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
2010-12-29-Clean up some comments.Nils Jacobs
2010-12-14Set the ROMSIZE as 4MB.Zheng Bao
2010-12-13Following patch adds support for suspend/resume functions. I had to change th...Rudolf Marek
2010-12-11I was bitten by the rename, this is part of r6165.Rudolf Marek
2010-12-11Following patch makes just one fadt.c file. For SB700.Rudolf Marek
2010-12-10Add TINY_BOOTBLOCK support for AMD SB700.Uwe Hermann
2010-12-09Merge enable_rom.c files into bootblock.c files.Uwe Hermann
2010-12-09Add missing instruction break.Zheng Bao
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
2010-12-06Before lane reversal,Zheng Bao
2010-11-30Trivial. Reindent and dos2unix.Zheng Bao
2010-11-26AMD SB600: Add TINY_BOOTBLOCK support.Uwe Hermann
2010-11-26AMD-8111: Add TINY_BOOTBLOCK support.Uwe Hermann
2010-11-24This patch solves crashes and BSODs that occur when booting Win7 withScott Duplichan
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
2010-10-20Revert sblk/sblink change, use sblk like the rest of the codebase does.Uwe Hermann
2010-10-18This patch enables SB700 option PrefetchEnSPIFromHost in early setup.Scott Duplichan
2010-10-17In the RS780/RS690 ProgK8TempMmioBase() function, the dst-link field is setLiu Tao
2010-10-17We currently read the CPU HT speed from HT chain 0's register.Liu Tao
2010-10-17Add more missing GPL-headers, fix inconsistencies in others.Uwe Hermann
2010-10-13Enable or disable the power button in KconfigPeter Stuge
2010-10-13Fix a stupid bug in rs780 and rs690 code.Zheng Bao
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
2010-10-10Same applies for SB600.Rudolf Marek
2010-10-10Following patch fixes the boot_switch_sata_ide logic. It can swapRudolf Marek
2010-10-10Following patch enables UDMA on ALL IDE devices. The current code enables it ...Rudolf Marek
2010-10-10Trivial. Spelling check.Zheng Bao
2010-10-07RS780 function ProgK8TempMmioBase is setting a reservedScott Duplichan
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
2010-09-26Only show the USB Debug Port kconfig option to the user if a mainboardUwe Hermann
2010-09-25Various Debug Port southbridge implementation fixes / cosmetics.Uwe Hermann
2010-09-24Make SB600/SB700 more similar for easier diffs (trivial).Uwe Hermann
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
2010-09-22 Here is a proposed way how to handle the SATA PHY settings on SB700. It Rudolf Marek
2010-09-13Print an error and correct pci scan limits. Skip sb700 ISA DMA init if needed.Juhana Helovuo
2010-09-08Make timer2 the default choice for TSC initialization.Patrick Georgi