summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
AgeCommit message (Collapse)Author
2011-09-15AMD SB800 early console use fixefdesign98
This change removes printk's that occur before console init is called. In the best case, these would cause an extremely slow boot, and in the worst case would cause a complete post failure. Change-Id: I50388e71225e95db602aa45835c39126c1c920a3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/216 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14rs780: hide unused gfx ports and gpp portsKerry Sheh
Hide the unused gfx ports and gpp ports if they are not configured as hotplug. lspci -vvv will get more accurate information under Linux, tested on avalue/eax-785e. Change-Id: Iaabfd362a0a01f21d0f49aa2bd2d26f9259013fb Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-07AMD SB800 southbridge updateKerry She
This patch enables access to the registers of the hardware monitor logical device in the superio via isa ports 0x295/0x296. Previously this was not enabled in the SB8xx LPC device. This is required for initialisation in init_hwm() in src/superio/winbond/w83627hf/superio.c and also by OS-level sensor monitoring such as lm-sensors to access temperature, fan monitoring and control and voltage registers. asrock/e350m1 and advansus/a785e-i mainboard changes are included herein. Change-Id: I2176885549277b335c0c41b48457d09b9b76b703 Signed-off-by: Per Hansen <perh52@runbox.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/159 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-04Adjust some code/comment of sb700 sata initWang Qing Pei
The inline comment of sata_init function seems not placed correctly. Rearrange it. Change-Id: I63480da60e51cdc68e64c302ad2d8a6197e288f6 Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/186 Tested-by: build bot (Jenkins)
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-14Move AMD SB800 early clock setup.Scott Duplichan
Move the AMD SB800 early clock setup code that is needed for early serial port operation from mainboard/romstage.c to sb800/bootblock.c. This prevents code duplication and simplifies porting. Change-Id: I615cfec96c9f202d9c154dc6674ec7cbcf4090c3 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/96 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-14Set SB800 ROM decode size based on kconfig.Marc Jones
Change-Id: I46ea26b5534064fe1c7e2ce2b2f12cacf18a4d4d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/94 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
sb800 pci bridge SHOULD enabled by default according to the chipset document, but actually not enabled on some mainboard. enable sb800 pci bridge when told to enable in devicetree.cb. tested on ibase persimmon mainboard. Change-Id: I42075907b4a003b2e58e5b19635a2e1b3fe094c3 Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/63 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20sb800: move spi prefetch and fast read mode to sb bootblock.Stefan Reinauer
So we don't waste time on the first cbfs scan. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> [adapt persimmon with the same change, and work around romcc bug in bootblock code: it doesn't like MEMACCESS[idx] |= value;] Change-Id: Ic4d0e53d3102be0de0bd18b1b8b29c500bd6d997 Reviewed-on: http://review.coreboot.org/9 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-19ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nicScott Duplichan
Scott Duplichan's patch from the mailing list: sb800 cimx wrapper: Run the complete sb800 cimx sbBeforePciInit() function once, after determining device 0x15 function enables. 1) Update the asrock e350m1 devicetree.cb to match the hardware. 2) Change the way the sb800 cimx wrapper code works. The original cimx code calls sb800 cimx function sbBeforePciInit() once. When ported to coreboot, the gpp component of this function was called once for each gpp port, as the gpp port's enable/disable state became known. A 05/15/2011 change makes the early gpp code run only once, triggered by processing the 4th gpp port. This method is not general enough because the 4th gpp port is not enabled on all boards. With the current change, the early gpp code runs when the first gpp port is processed. If any gpp ports are enabled, the first must be enabled. Tested with Win7 and linux on asrock e350m1. This change will also affect amd inagua, and has not been tested on that board. Change-Id: I93d44c216bfcab3c3a8fbb79d23dab43a65850e6 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/44 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-09Revert changes to set the sb800 to AHCI mode.Marc Jones
Seabios doesn't have this support included yet, which causes the generic Persimmon and other CIMx sb800 platforms to not boot. Change-Id: If07328b7c62d7fc314647adce8fab983ed327854 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/14 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-07re-indent, so files conform to coding guidelines.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: If840164fa0e2b6349ba920edf06386ba1fe08aab Reviewed-on: http://review.coreboot.org/8 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-01trivial remove blanks at the end of lineKerry She
Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Kerry She <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6614 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-01This patch fix a AMD sb800 wrapper compile warning:Kerry She
src/southbridge/amd/cimx_wrapper/sb800/late call clear_ioapic but not include the prototype declare header file. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-16cimx_wrapper/sb800: Fix indent in late.c:sb800_enable()Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6597 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Update gpp port configuration.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6592 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Program the I/O APIC ID.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6580 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Enable AHCI mode and hide IDE controller to reduce boot time.Scott Duplichan
Note: enable AHCI in seabios and apply seabios patch: http://www.mail-archive.com/seabios@seabios.org/msg00437.html Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6579 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Configure CIMx to use 33 MHz fast mode for SPD read.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-07RS780 DDI Lanes configure support,Kerry She
and remove RS780 get_cpu_rev(). Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-07SB800 CIMX code can share the AGESA V5 lib code,Kerry She
some platform only use sb800 cimx code, not use AGESA v5 code. for such platform, one can compile the sb800 cimx and AGESA v5 lib code. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6559 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-20drop dead code from sb800 bootblockStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19Fix some more misuses of ifdef/if definedStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6515 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-12Use TOM2 for highest sysmem setting for northbound memory routing (DMA). ↵Marc Jones
This fixes 4GB memory issues. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Kerry she <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6488 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html It's about time we follow this advice. Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and drop unused CPP define Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add the SR5650 & SP5100 to the Kconfig and Makefile.incZheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
Since the SB700 has changed to sb7xx_51xx, change legacy name in other mainboard. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-27Add AMD SR56x0 support.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6462 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Fix power_on_after_fail handling on AMD SB600Josef Kellermann
Bit 0 of pm reg#74 have to be set turn on system after power resumes. See '42661_sb600_rrg_nda_3.02.pdf' (or '46155_sb600_rrg_pub_3.03.pdf') for details, look for 'PwrFailShadow'. [Patrick: I didn't include the get_options reorganization as get_option doesn't overwrite "on" if power_on_after_fail isn't found in CMOS. Style changes were also left out.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26It adds support for automatic PSS object generation for AMD pre fam Fh CPU. ↵Rudolf Marek
Those CPUs require a hardcoded table, which I managed to rewrite during one particularly boring flight. Too pity it is only for Opteron CPUs. Someone needs to finish the second PDF for All others Athlons and Semprons. Also it enables the FID/VID changes in SB. Jakllsch had some troubles with that too but on am2 CPU. Those bits are only documented in SB600. They arent in RRG RPR and BDG. Signed-off-by: Rudolf Marek <r.marek@asssembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Add new option 'sata_mode' to CMOS and 'SATA_MODE' to Kconfig for AMD SB600Josef Kellermann
coreboot used to set the chipset to IDE mode unconditionally. Now, the user has a couple of ways to choose the configuration: - If a CMOS variable sata_mode exist, it is used to decide if IDE or AHCI is to be used as interface. - If not, a Kconfig option is used. - If unchanged, the Kconfig option is set to IDE. So unless the cmos.layout is extended or Kconfig is modified, this won't change behaviour. [Patrick: Compared to Josef's version, I changed the Kconfig option to be boolean, instead of a magic string. Also, the "IDE" default is handled in Kconfig, instead of an additional line of code.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6379 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-15SERIAL_POST was renamed to CONSOLE_POST a while agoStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Removed LPC DMA Deadlock workaround...Josef Kellermann
Setting bit#21 in k8_f0#68 is part of the errata#169 which is handled in amdk8/coherent.c Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 This code provides southbridge initialization for SB800 south bridges. It ↵Frank Vibrans
is dependent on the AMD CIMx/SB800 code. Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-12Attached patch fixes the LPC decode ranges of SB600/SB800. We enable early ↵Rudolf Marek
only Serial/SIO/RTC. Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only... Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc... Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad. Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded. While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6343 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10RS690: Provide support for MMCONF.Josef Kellermannseppk
If enabled, set up 0xe0000000..0xf0000000 as MMCONF area. Must still be configured in per-board ACPI for the OS to pick it up, so it's disabled by default. Signed-off-by: Josef Kellermann<seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-03Fix subvendor/subdevice programming on RS690Josef Kellermann
Some RS690 devices require subvendor/subdevice IDs to be programmed at locations other than default 0x2c. Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6330 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-28Attached patch fixes the LPC decode ranges of SB700. We enable early only ↵Rudolf Marek
Serial/SIO/RTC. Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only... Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc... Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad. Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded. While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6316 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-28Fix Bimini buildStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6307 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27Trivial. Re-indent the code.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6301 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27Set the phy via weak function.Zheng Bao
As Rudolf called. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6300 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-25Set the SB800 SATA PHY correctly.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6297 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-24Change fadt revision back to 3.Zheng Bao
The AcpiPmaCntBlk have to be set. Further research is needed to find out why. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-21Now bimini can boot linux to login.Zheng Bao
Note: 1. bimini_fam10/Kconfig: Set GENERATE_MP_TABLE in Kconfig. This will make sure the smp_write_config_table will run. Then intr_data will be written into 0xC00/0xC01. 2. bootblock: Use PCI_DEV(0, 0x14, 3) instead of pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB800_LPC), 0). The pci_locate_device will cause the system crash. 3. fadt.c: Change fadt revision to 1. 3 will cause the linux hang. Why? 4. early_setup.c: pmio 0x65 has change its meaning. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6288 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20S3 feanture of SB800. Compiliant with SB700.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6280 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20Move some board specific functions to sb800.h.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6279 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20This sb800 code is derived from sb700.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-18remove the code which is not ready to release.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6264 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-18remove the code which is not ready to release.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6263 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-12drop unused filesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-11change a readable way to fix SB800 CIMX "multi-character constant warning".Kerry She
by using 'Int32FromChar' macro, instead of the ASCII code. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01src/southbridge/amd/cimx_wrapper: Run dos2unix on the files.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6237 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01AMD SB800: Drop component prefix from filenames.Uwe Hermann
We did the same with other chipsets in r6150. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01Add AMD SB800 southbridge support via cimx_wrapper.Kerry She
Signed-off-by: Kerry She <Kerry.she@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-31Add RS785(RS880) support. Just few pci_ids.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6227 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-30Remove duplicated GX2 processor IIOC mode setting on CS5535 southbridge codeNils Jacobs
and fix CIS mode comments. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6225 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
to FG (FooGlue). As the GX2 has no VIP port. -Change the Memmory setup MSR register names so they correspond better to the databook. (Part1) This is less confusing for beginners. -Add a MSR printing function to northbridge.c like in the Geode LX code. -Remove the AES register names.(GX2 has no AES registers) -Delete some unused code. -Clean up GX2 northbridge code to match Geode LX code. -Add missing copyright header to northbridge.c. -Move hardcoded IRQ defining from northbridge.c to irq_tables.c . Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Clean up some comments.Nils Jacobs
-Remove some white spaces. -Remove some leading zeros. -Fix a typo in LX code. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-14Set the ROMSIZE as 4MB.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6178 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13Following patch adds support for suspend/resume functions. I had to change ↵Rudolf Marek
the get_cbmem_toc because macro magic did not work well. The writes to NVRAM are not used in asrock board (k8 pre rev f) but they should work when used with am2 boards. In fact maybe the suspend will work on mahogany or others ;) - with some simple patch which follows for asrock. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11I was bitten by the rename, this is part of r6165.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6166 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11Following patch makes just one fadt.c file. For SB700.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6165 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-10Add TINY_BOOTBLOCK support for AMD SB700.Uwe Hermann
Factor out the ROM decode enable functionality into bootblock.c and handle it via the usual TINY_BOOTBLOCK mechanism. Use "select TINY_BOOTBLOCK" in the southbridge, not individual boards. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Merge enable_rom.c files into bootblock.c files.Uwe Hermann
All southbridges using TINY_BOOTBLOCK have a bootblock.c files which simply includes an enable_rom.c files. As discussed on the mailing list, drop the enable_rom.c file by merging it into bootblock.c. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6158 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Add missing instruction break.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6155 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Before lane reversal,Zheng Bao
De-asserts STRAP_BIF_all_valid for PCIE-GFX core. After lane reversal, Asserts STRAP_BIF_all_valid for PCIE-GFX core. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: QingPei Wang <wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6142 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-30Trivial. Reindent and dos2unix.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26AMD SB600: Add TINY_BOOTBLOCK support.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6125 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26AMD-8111: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, add missing license header to amd8111_enable_rom.c, add some more code comments and use PCI IDs from pci_ids.h instead of hardcoding. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6124 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-24This patch solves crashes and BSODs that occur when booting Win7 withScott Duplichan
AMD RS780 uma graphics. Tested with frame buffer sizes 64m through 1GB by running dxdiag and Windows media player at 1600x1200 true color. Additional changes needed to boot Win7 on Mahogany_fam10 will follow. -- Enable and program the debug bar as required by the ATI graphics driver. First, make the debug bar writable and allow resource allocation code to program it. Once programmed, enable its operation. -- Disable the family 10h processor mmconf while the RS780 mmconf is in use. -- Make strap programming more closely follow the reference BIOS. -- Disable PCIe bar 3 after using it. -- UMA size is no longer hardcoded. -- Disable write combining for all steppings to eliminate stability problem. -- Correct task file data. -- Improve the accuracy of the Atom table that passes information to the driver. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-20Revert sblk/sblink change, use sblk like the rest of the codebase does.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18This patch enables SB700 option PrefetchEnSPIFromHost in early setup.Scott Duplichan
It affects only systems booting from SPI flash, not those booting from LPC flash. By default, the SB700 reads dwords from the SPI flash chip. Setting PrefetchEnSPIFromHost causes the SB700 to read entire cache lines from the flash chip. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17In the RS780/RS690 ProgK8TempMmioBase() function, the dst-link field is setLiu Tao
to zero, so for boards with RS780 not on CPU's HT chain 0, the function will mis-configure the MMIO dst-link routing, and the following enable_pcie_bar3() function will hang when it visits the MMIO. The following patch fixes the problem, and is tested on a K8 board with RS780 on HT chain 1. Signed-off-by: Liu Tao <liutao1980@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17We currently read the CPU HT speed from HT chain 0's register.Liu Tao
Fix that to read the register from the chain where the SB chip is on. Signed-off-by: Liu Tao <liutao1980@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17Add more missing GPL-headers, fix inconsistencies in others.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5957 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Enable or disable the power button in KconfigPeter Stuge
Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Fix a stupid bug in rs780 and rs690 code.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5947 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Same applies for SB600.Rudolf Marek
Following patch enables UDMA on ALL IDE devices. The current code enables it only for primary master, which causes my DVD drive to fail under windows install and even after hard reset in linux (DMA seems lockup). The fix should not have any influence for Linux because the IDE driver will correctly reprogram this bit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5933 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Following patch fixes the boot_switch_sata_ide logic. It can swapRudolf Marek
primary / secondary IDE channel with SATA (in IDE mode). The bug was that setup was done in wrong device. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Following patch enables UDMA on ALL IDE devices. The current code enables it ↵Rudolf Marek
only for primary master, which causes my DVD drive to fail under windows install and even after hard reset in linux (DMA seems lockup). The fix should not have any influence for Linux because the IDE driver will correctly reprogram this bit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Trivial. Spelling check.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07RS780 function ProgK8TempMmioBase is setting a reservedScott Duplichan
bit in the AMD processor 'MMIO Limit Address Register'. I suspect it is because of a typo where 0x80 was entered as 0x8. If 0x80 is used, then the strap configuration register accesses become non-posted, which is how the Shiner reference BIOS does it. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5919 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
The AMD SB700 allows changing the physical USB port to be used as USB Debug Port, implement support for this. Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices currently, AFAICS. Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility. Untested, but should work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-26Only show the USB Debug Port kconfig option to the user if a mainboardUwe Hermann
is selected that uses a chipset which actually has that functionality _and_ we have code to initialize the Debug Port in coreboot (for that chipset). Also, remove the duplicate list of PCI IDs and just link to the wiki page at: http://www.coreboot.org/EHCI_Debug_Port The list is now less useful in the kconfig help as this option will only appear for those boards where it's actually supported. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Various Debug Port southbridge implementation fixes / cosmetics.Uwe Hermann
- Use PCI_COMMAND and PCI_COMMAND_MEMORY from pci_def.h instead of hardcoding their values. - SB600/SB700: Drop useless/unused SB600_DEVN_BASE and SB700_DEVN_BASE. - ICH7: Drop unused EHCI_CONFIG_FLAG and EHCI_PORTSC. - s/uint32_t/u32/. - Cosmetics, whitespace, coding style fixes and added code comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5847 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Make SB600/SB700 more similar for easier diffs (trivial).Uwe Hermann
Also fixes random whitespace issues, typos, etc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5837 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future. Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-22 Here is a proposed way how to handle the SATA PHY settings on SB700. It Rudolf Marek
consits of weak function which always exists (with defaults) and a possibility to override this with normal function in main.c. This is the other way of doing that and not using the devictree.cb. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5825 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:41:16 +0000