summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb700
AgeCommit message (Collapse)Author
2010-10-18This patch enables SB700 option PrefetchEnSPIFromHost in early setup.Scott Duplichan
It affects only systems booting from SPI flash, not those booting from LPC flash. By default, the SB700 reads dwords from the SPI flash chip. Setting PrefetchEnSPIFromHost causes the SB700 to read entire cache lines from the flash chip. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Following patch fixes the boot_switch_sata_ide logic. It can swapRudolf Marek
primary / secondary IDE channel with SATA (in IDE mode). The bug was that setup was done in wrong device. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Following patch enables UDMA on ALL IDE devices. The current code enables it ↵Rudolf Marek
only for primary master, which causes my DVD drive to fail under windows install and even after hard reset in linux (DMA seems lockup). The fix should not have any influence for Linux because the IDE driver will correctly reprogram this bit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Trivial. Spelling check.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5930 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
The AMD SB700 allows changing the physical USB port to be used as USB Debug Port, implement support for this. Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices currently, AFAICS. Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility. Untested, but should work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-26Only show the USB Debug Port kconfig option to the user if a mainboardUwe Hermann
is selected that uses a chipset which actually has that functionality _and_ we have code to initialize the Debug Port in coreboot (for that chipset). Also, remove the duplicate list of PCI IDs and just link to the wiki page at: http://www.coreboot.org/EHCI_Debug_Port The list is now less useful in the kconfig help as this option will only appear for those boards where it's actually supported. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Various Debug Port southbridge implementation fixes / cosmetics.Uwe Hermann
- Use PCI_COMMAND and PCI_COMMAND_MEMORY from pci_def.h instead of hardcoding their values. - SB600/SB700: Drop useless/unused SB600_DEVN_BASE and SB700_DEVN_BASE. - ICH7: Drop unused EHCI_CONFIG_FLAG and EHCI_PORTSC. - s/uint32_t/u32/. - Cosmetics, whitespace, coding style fixes and added code comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5847 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Make SB600/SB700 more similar for easier diffs (trivial).Uwe Hermann
Also fixes random whitespace issues, typos, etc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5837 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future. Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-22 Here is a proposed way how to handle the SATA PHY settings on SB700. It Rudolf Marek
consits of weak function which always exists (with defaults) and a possibility to override this with normal function in main.c. This is the other way of doing that and not using the devictree.cb. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5825 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-13Print an error and correct pci scan limits. Skip sb700 ISA DMA init if needed.Juhana Helovuo
Signed-off-by: Juhana Helovuo <juhe@iki.fi> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5805 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Remove unused ide0_enable and sata0_enable entries from SB7xx Rudolf Marek
and SB600. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5781 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-07fix some more warningsStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5658 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-19Trivial. Cleaning up about the blank line.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5634 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-17Always enable parent resources before child resources.Myles Watson
Always initialize parents before children. Move s2881 code into a driver. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-09Same conversion as with resources from static arrays to lists, exceptMyles Watson
there is no free list. Converting resource arrays to lists reduced the size of each device struct from 1092 to 228 bytes. Converting link arrays to lists reduced the size of each device struct from 228 to 68 bytes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5626 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25also rename the config option.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25fix most usbdebug warnings and fix function names.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25Long ago we agreed on kicking the _direct appendix because everything inStefan Reinauer
coreboot is direct. This patch does it. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5586 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-21Use lists instead of arrays for resources in devices to reduce memory usage.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-20As Myles suggested a while back: Switch long time #warnings to be commentsStefan Reinauer
only. Keeping them as #warnings will not likely that they're fixed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5459 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-09zero warnings days.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-09zero warning days.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-06No warnings day, next round.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
Only some assembler files still have \r\n ... Can we move that part to C completely? Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-23Remove the building warnings.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5273 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-17more warnings gone...Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5254 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-17The SB600 also has the BootFailTimer. We should disable it,Zheng Bao
otherwise it will keeps reboot. The comment was also added in detail to make less confusing when we debug SB600/SB700. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5240 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16pci drivers should be const.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5229 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16Delete Config.lb in new southbridge folders.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-16Features supported in SB700 code:Zheng Bao
* SATA initialization. * USB initialization. * HDA initialization. * LPC initialization. * IDE initialization. * SMBUS initialization. Note: 1. I tried to add the description of every step to the code. For example, if it is made based on rpr, section 2.4.5, I will pasted the words from 2.4.5 to the c code. But the document I worked with might be different with the most updated one. A new section has been added and the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I correct every comment if I met one. But I have to confess that I am so reluctant to find out everyone. I believe it will be correct in the long run. 2. I only test the SATA port 0-3. The ports 4, 5 are "PATA emulations". I am confused about it. 3. This patch is not only about SB700. Actually it should be SB7x0. But I dont think it is nice to change everything to SB7x0. It is ugly, isn't it. As far as I know, they all use the same code with revision checking. If you guys think it is appropriate, please modify it to sb7x0. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 06:26:27 +0000