summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cimx
AgeCommit message (Collapse)Author
2014-06-12southbridge/amd: Change #if defined to #if IS_ENABLEDDave Frodin
The IMC functions were being called and timing out when the CONFIG_SB800_IMC_FWM/CONFIG_HUDSON_IMC_FWM were defined as 0. Changing to a IS_ENABLED will keep the IMC handshake from occuring if the IMC firmware isn't running. Tested on a Persimmon platform which makes three calls to spi_claim_bus() with each call timing out after 500ms. Change-Id: I5d4bbcecf003b93704553b495a16bcd15f66763b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5974 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-11amd/southbridge/lpc: SPI BAR has fixed size/locationDave Frodin
The CIMX sb700/sb800/sb900 and agesa/hudson code was treating the LPC SPI BAR as a normal PCI BAR. This will set the resources for a fixed size at a fixed address. This was tested on hp/abm, amd/persimmon, and gizmosphere/gizmo boards. Change-Id: I1367efe0bbb53b7727258585963f61f4bd02ea1d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5947 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11AMD/CIMx: Add functions for AMD PCI IRQ routingMike Loptien
The PCI_INTR table is an Index/Data pair of I/O ports 0xC00 and 0xC01. This table is responsible for physically routing IRQs to the PIC and IOAPIC. The settings given in this table are chipset and mainboard dependent, so the table values will reside in the mainboard.c file. This allows for a system to uniquely set its IRQ routing. The function to write the PCI_INTR table resides in cimx_util.c because the indices into the table have the same definitions for all SBx00 FCH chipsets. The next piece is a function that will read the PCI_INTR table and program the INT_LINE and INT_PIN registers in PCI config space appropriately. This function will read a devices' INT_PIN register, which is always hardcoded to a value if it uses hardware interrupts. It then uses this value, along with the device and function numbers to determine an index into the PCI_INTR table. It will read the table and program the corresponding value into the PCI config space register 0x3C, INT_LINE. Finally, it will set this IRQ number to LEVEL_TRIGGERED on the PIC because it is a PCI device interrupt and the must be level triggered. For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN value hardcoded to 2. This corresponds to PIN B. On the Persimmon mainboard, I want the USB device to use IRQ 11. I will program the PCI_INTR table at index 0x31 (this USB device index) to 11. This function will then read the INT_PIN register, read the PCI_INTR table, and then program the INT_LINE register with the value it read. It will then set the IRQ on the PIC to LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4. Also, the SB700 has slightly different register definitions than the newer SB800 and SB900 so it needs its own set of #defines for the pci_intr registers. Only the Persimmon mainboard is adapted to this change as an example for other mainboards. Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5877 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-25southbridge/amd/cimx/sb900: Unused func smbus_delay()Edward O'Callaghan
Spotted by Clang Change-Id: I14c099625db6f38fd0630b8864cf2a702b81d353 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5832 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-22southbridge/amd/cimx/sb700: Unused func smbus_delay()Edward O'Callaghan
Spotted by Clang. Change-Id: Ie4bed914ab694f4e96155140b8b54b6eb96d70d7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5819 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-14southbridge/amd/cimx/sb800: Unused func smbus_delay()Edward O'Callaghan
Change-Id: Icc12aafc1462c08bca77a1798d4fae86b8250708 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5748 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
We should configure i8254/i8259 down in to the southbridge rather than romstage of every AGESA/CIMx board much like Intel boards do. Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5669 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1. Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-20AMD cimx sb700/sb800/sb900: Fix NODE_PCI and use of MAX_PHYSICAL_CPUSKyösti Mälkki
Match the definition of NODE_PCI() with get_node_pci(), so romstage and ramstage agree of the PCI BDFs for nodes. Note that all board have CONFIG_CDB = 0x18 and the maximum for nodes = 8, so we always have (CONFIG_CDB + x) < 32. Change-Id: I676ee53a65ef5b1243df2c5889577dd987c8fc9c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5536 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-13cimx/sb800/cfg.c: Cut out purposeless ROM reading noise.Edward O'Callaghan
Follow along hudson, cut out "SLP_TYP type was 0" excessively filling the buffer. We could make this conditional on non-zero? Change-Id: Iffd4c146b2ac4f57dbc3a011a683c92b6e132e39 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5495 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
Read this variable from PCI configuration capabilities list instead. Change-Id: I0cfe981833873397c32cd3aa2af307f35f01784b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11amd/cimx: fix sb(8|9)00 NULL type redefineAaron Durbin
It is inappropriate for chipset code to be redefining types -- especially NULL to a non-pointer type. There's only one non-straight forward change. A condition being checked was '!ptr_type == NULL' (0 as int). That check is actually 'ptr_type != NULL'. Change-Id: Iab5733e5a573baba6fec94e0c955ba4fad72c836 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5088 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-06uart8250: Drop unused declarationsKyösti Mälkki
Change-Id: Ie915ef9dbc45604bd5ca1b610acb12af634fdebe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5138 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-04AMD cimx/sb800: Set SPI frequency and prefetchKyösti Mälkki
Broken with/since commit d1cb0eec. Original intention was to set the frequency for 'Fast Read' command in bits 15..14, and enable 'Fast Read' command. Modified register contains SPI frequency for 'Normal Read' command in bits 13..12. Default for this is 11b for 16.5 MHz. Existing code unintentionally clears these bits, increasing SPI frequency to 66MHz for 'Normal Read' command. This is above specifications for many common SPI flash components and also makes flashrom older than 0.9.7-r1750 to operate unreliably on read/write/erase for these platforms. Change-Id: I30109e2a0410c0bb0bdc968ea71787396b32e761 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5089 Tested-by: build bot (Jenkins) Reviewed-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-01-06usbdebug: Fix hidden menuconfig optionsKyösti Mälkki
Options for selecting the USB port and controller for usbdebug were unintentionally hidden with commit 8232bc2c on AGESA platforms using cimx/sb700 or cimx/sb800. Change-Id: Ibacc81a580519fe7fa86f08374046625327340b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4607 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
Clean up superfluous line terminators. Change-Id: If837b4f1b3e7702cbb09ba12f53ed788a8f31386 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4562 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-12-07Correct file permissions.Idwer Vollering
Some files have incorrect/odd permissions, correct them: remove unnecessary +x flags. Change-Id: I784e6e599dfee88239f85bb58323aae9e40fb21c Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4490 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-10-22usbdebug: Fix boards without EARLY_CBMEM_INITKyösti Mälkki
The main usbdebug file lib/usbdebug.c was removed from romstage build with commit f8bf5a10 but the chipset-specific parts were not, leading to unresolved symbol errors for AMD platforms. Add a silent Kconfig variable USBDEBUG_IN_ROMSTAGE for convenient use of this feature. Change-Id: I0cd3fccf2612cf08497aa5c3750c89bf43ff69be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3983 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-24southbridge/cimx/sb900: Rename headers to match sb700 & sb800Corey Osgood
Northbridge code includes these headers, so they all need to have the same name to allow different combinations of northbridge and southbridge. This changes the sb900 names to match sb700 & sb800, and points agesa/family12 and amd/torpedo to the new file names. Change-Id: I7a654ce9ae591a636a56177f64fb8cb953b4b04f Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Reviewed-on: http://review.coreboot.org/3825 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-09-11CBMEM: Backup top_of_ram instead of cbmem_tocKyösti Mälkki
AMD northbridges have a complex way to resolve top_of_ram. Once it is resolved, it is stored in NVRAM to be used on resume. TODO: Redesign these get_top_of_ram() functions from scratch. Change-Id: I3cceb7e9b8b07620dacf138e99f98dc818c65341 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-24Add pci_devfn_t and use with __SIMPLE_DEVICE__Kyösti Mälkki
Declare the functions that may be used in both romstage and ramstage with simple device model. This will later allow to define PCI access functions for ramstage using the inlined functions from romstage. Change-Id: I32ff622883ceee4628e6b1b01023b970e379113f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3508 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-10usbdebug: Fix AMD cimx/sb700 cimx/sb800Kyösti Mälkki
These Kconfig entries were forgotten from the commit that re-enabled usbdebug for these southbridges. Change-Id: Ia17f1dd3340408da7c033c2c949404d2636bed44 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3849 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-07usbdebug: Support AMD cimx/sb700 cimx/sb800 once againKyösti Mälkki
Support code for sb700 and sb800 existed already, but Kconfig and compile-time issues prevented from enabling USBDEBUG for boards with the affected AMD southbridges. Change-Id: I49e955fcc6e54927320b9dc7f62ea00c55c3cedf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-01Add directive __SIMPLE_DEVICE__Kyösti Mälkki
The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-01usbdebug: Drop duplicates of EHCI BAR relocation codeKyösti Mälkki
All the additional work that needs to be done in EHCI BAR relocation is independent of the hardware platform and was functionally identical in all the copies removed. When USBDEBUG is not selected, PCI EHCI controllers use standard pci_dev_read_resources() call. With USBDEBUG selected, PCI EHCI controller's device_operations .read_resources is replaced with pci_ehci_read_resources() call, which in turn will replace the device_operations .set_resources call. The replacement for .set_resources reconfigures usbdebug driver side, and calls the original .set_resources to configure hardware side. Change-Id: I8e136a5da4efedf60b6dd7068c0488153efaaf8e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3412 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-28amd/cimx/sb700/late.c: Add type cast to (UINT8)Bruce Griffith
This change inserts a type cast to eliminate a compiler warning. Change-Id: If223f61f1565caeadb1b7e0762975b1b2412eda5 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3541 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c file already placed under southbridge/. All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally identical reset.c file under mainboard/. Move those files under respective southbridge/. Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3486 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-18AMD/SB800: Define the GPP PCIe lane distributionDave Frodin
Commit 23023a5 correctly enabled the SB800 GPP PCIe ports but didn't distribute the 4 GPP PCIe lanes amongst the enabled PCIe ports. This fix was verified by openvoid on a AsRock E350M1 motherboard. Change-Id: I0116c5f518e0d000be609013446e53da4112f586 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3104 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-15Fam14 DSDT: Also return for unrecognized UUID in _OSCMike Loptien
Fixing warnings introduced by the following patches: http://review.coreboot.org/#/c/2684/ http://review.coreboot.org/#/c/2739/ http://review.coreboot.org/#/c/2714/ These patches were meant to fix the dmesg warning about the OSC method not granting control appropriately. These patches then introduced warnings during the coreboot build process which were missed during the patch submission process. These warnings are below: Intel ACPI Component Architecture ASL Optimizing Compiler version 20100528 [Oct 15 2010] Copyright (c) 2000 - 2010 Intel Corporation Supports ACPI Specification Revision 4.0a dsdt.ramstage.asl 1143: Method(_OSC,4) Warning 1088 - ^ Not all control paths return a value (_OSC) dsdt.ramstage.asl 1143: Method(_OSC,4) Warning 1081 - ^ Reserved method must return a value (Buffer required for _OSC) ASL Input: dsdt.ramstage.asl - 1724 lines, 34917 bytes, 889 keywords AML Output: dsdt.ramstage.aml - 10470 bytes, 409 named objects, 480 executable opcodes Compilation complete. 0 Errors, 2 Warnings, 0 Remarks, 494 Optimizations This patch gives the following compilation status: Intel ACPI Component Architecture ASL Optimizing Compiler version 20100528 [Oct 1 2012] Copyright (c) 2000 - 2010 Intel Corporation Supports ACPI Specification Revision 4.0a ASL Input: dsdt.ramstage.asl - 1732 lines, 33295 bytes, 941 keywords AML Output: dsdt.ramstage.aml - 10152 bytes, 406 named objects, 535 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 432 Optimizations The fix is simply adding an Else statement to the If which checks for the proper UUID. This way, all outcomes will return a full control package. This patch has no effect on the dmesg output. Change-Id: I8fa246400310b26679ffa3aa278069d2e9507160 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3052 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-11Persimmon/Fam14/SB800 DSDT: Split into common areasMike Loptien
Split the Persimmon DSDT into common code areas. For example, split the Southbridge specific code into the Southbridge directory and CPU specific code into the CPU directory. Also adding the superio.asl file to the Persimmon DSDT tree. This file is empty for the moment but will be necessary in the future. I have also emptied the thermal.asl file in the mainboard directory because it does not seem to perform as intended (fan control does not change when it is brought back into the code base) and it has been inside a '#if 0' statement for a long time. Removing it until it is decided that it is actually necessary. This change was verified in three different ways: 1. Visual comparison of the compiled DSDT pulled from the Persimmon after booting into Linux using the ACPI tools acpidump, acpixtract, and iasl. The comparison was done between the DSDT before and after doing the split work. This test is somewhat difficult considering the expanse of the changes. Blocks of code have been moved, and others changed. 2. Linux logs were dumped before and after the DSDT split. Logs dumped and compared include dmesg and lspci -tv. Neither log changed significantly between the two compare points. 3. The test suite FWTS was run on the Coreboot build both before and after doing the DSDT split with the command 'sudo fwts -b -P -u'. The flag -b specifies all batch jobs, -P specifies all power tests, and -u specifies utilities. Interactive jobs were not run as most of them consist of laptop checks. Again, there were no significant changes between the two endpoints. These tests lead me to believe that there was no change in the functionality of the ACPI tables apart from what is known and expected. This patch is the first of a series of patches to split the DSDT. The ASRock patch was merged before this one and breaks the ASROCK E350M1 build (patch 8d80a3fb: http://review.coreboot.org/#/c/3050/). Please be aware of this dependency when pulling these patches. Other patches that depend on this patch are 'AMD Fam14: Split out the AMD Fam14 DSDT' (http://review.coreboot.org/#/c/3051/) and 'Fam14 DSDT: Also return for unrecognized UUID in _OSC' (http://review.coreboot.org/#/c/3052/) Change-Id: I53ff59909cceb30a08e8eab3d59b30b97c802726 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3048 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-04-01AMD hudson & SB800 - Fix issues with mawkMartin Roth
When calculating the offsets of the various binary blobs within the coreboot.rom file, we noticed that using mawk as the awk tool instead of using gawk led to build issues. This was finally traced to the maximum value of the unsigned long variables within mawk - 0x7fff_ffff. Because we were doing calculations on values up in the 0xffxxxxxx range, these numbers would either be turned into floating point values and printed using scientific notation, or truncated at 0x7fff_ffff. To fix this, we print the values out as floating point, with no decimal digits. This works in gawk, mawk, and original-awk and as the testing below show, seems to be the best way to do this. printf %u 0xFFFFFFFF | awk '{printf("%.0f %u %d", $1 , $1 , $1 )}' mawk: 4294967295 2147483647 2147483647 original-awk: 4294967295 2147483648 4294967295 gawk: 4294967295 4294967295 4294967295 The issue of %d not matching gawk and original-awk has been reported to ubuntu. In the future, I'd recommend that whenever awk is used, a format is specified. It doesn't seem that we can count on the representation being the same between the different versions. Change-Id: I7b6b821c8ab13ad11f72e674ac726a98e8678710 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2628 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29AMD CIMx SB800: Update Kconfig help texts to new SATA mode defaultPaul Menzel
In the following commit commit ee5c111755ac4acc6dfb6e10a4e271211e149a39 Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Tue Mar 12 12:41:40 2013 +0100 AMD CIMx SB800: Enable AHCI mode for SATA controller by default Reviewed-on: http://review.coreboot.org/2661 I forgot to update the help texts to the new SATA mode default. Do so now. Additionally note that help texts for `choice` do not seem to be shown. Change-Id: I17f401633a2136efca2b21a621482e0724ff9f04 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2936 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-12AMD CIMx SB800: Enable AHCI mode for SATA controller by defaultPaul Menzel
The current default is IDE mode which is slower compared to AHCI mode. Therefore use AHCI mode by default. A similar change was made for AMD Persimmon in commit »Enable SATA AHCI for faster boot with SeaBIOS.« (96be74c7) [1] but was indirectly reverted by »sb800: Add sata ahci/raid mode kconfig option« (d4a0e7d0) [2]. [1] http://review.coreboot.org/220 [2] http://review.coreboot.org/225 Change-Id: I4fa31b0a3280891e7a3f37675ae8415205818947 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2661 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-06AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperioJens Rottmann
The power up default for the 14M_25M_48M_OSC switchable clock output ball of the SB800 chipset is 14 MHz. sb800/bootblock.c changes this to 48 MHz, which is the correct value for almost all SIOs. However, not for 'smscsuperio' (SMSC SCH311x), which needs the original 14 MHz and is not configurable for other clock speeds. A wrong SIO clock supply results in funny RS232 output (wrong bit speed) and non-working PS/2. We could switch back to 14 MHz in the mainboard's romstage.c, but then the clock frequency would change twice. The resulting short 48 MHz burst causes a handful of rubbish characters on RS232 on every boot until the SIO clock has stabilized again. This patch skips the SB800 clock switch if the SIO Kconfig requests 14 MHz. This does not affect any boards currently in the repository (yet). Change-Id: Icff41fd88dc41c08f3700ab4f786852f04eff2a4 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2454 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD Southbridge: Add RTC init to lpc_initMike Loptien
Adding RTC init code to the Southbridge initialization code in 'lpc_init'. This initializes the RTC so that the Date Alarm register is set to a valid value (0x00) at startup. By setting the Date Alarm register to 0x00, it does not get evaluated along with the seconds, minutes, and hours when running 'fwts s3'. Information about fwts (Firmware Test Suite) can be found here: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same edit made to the CIMX SB800 titled 'AMD/Persimmon: Add RTC init to CIMX SB800' with commit ID: c4d3d which can be viewed here: http://review.coreboot.org/#/c/2488/ Change-Id: Iddb7a3cbabe736b511cde03d7dc0a4a0b1c7fd90 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2510 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-23AMD/Persimmon: Add RTC init to CIMX SB800Mike Loptien
Adding RTC init code to the Southbridge initialization code in 'late.c'. This initializes the RTC so that the Date Alarm register is set to a valid value (0x00) at startup. By setting the Date Alarm register to 0x00, it does not get evaluated along with the seconds, minutes, and hours when running 'fwts s3'. Information about fwts (Firmware Test Suite) can be found here: https://wiki.ubuntu.com/Kernel/Reference/fwts This was tested on a Persimmon but will apply to other mainboards as well. Change-Id: I9a11bc3f9e3f53c46e7a4d72e62ebb0a4ba1bfe4 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2488 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21AMD S3: Introduce Kconfig variable 'S3_DATA_SIZE'Zheng Bao
Currently the size of the volatile storage for S3 reserved in the image is hardcoded to 32768 bytes. Make that configurable by introducing the Kconfig 'S3_DATA_SIZE'. As the storage space is needed for storing non-volatile, volatile and MTRR data, add a check if the size is big enough. Change-Id: I9152797cf0045c8da48109a9d760e417717686db Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2383 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-19AMD S3: Change S3_VOLATILE_POS to S3_DATA_POSZheng Bao
S3_DATA_POS defines address where the whole S3 data is stored. Change-Id: I4155a0821e74a3653caaead890e5fec5677637aa Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2438 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-18AMD S3: Fix typo vol*a*tile in southbridge KconfigZheng Bao
Change non-volitile to non-volatile. Change-Id: Idfc7db3b3dcf078f0f3134fc62679bed439a4fd2 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2437 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-11spi.h: Rename the spi.h to spi-generic.hZheng Bao
Since there are and will be other files in nb/sb folders, we change the general spi.h to a file name which is not easy to be duplicated. Change-Id: I6548a81206caa608369be044747bde31e2b08d1a Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2309 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-09Fix typo in SB800 Kconfig for IMC positionMartin Roth
The cimx/sb800 IMC Firmware location Kconfig option has a typo which would could set it to the wrong location. Change-Id: I38016bebd1bfe6ad6d3f1c02cb1960712fbf4ab2 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-28USBDEBUG: Enable the EHCI in AMD SouthbridgeZheng Bao
Since SB800, USB2.0 debug port is dev 0x12, func 2. Change-Id: Ie0e33cb2f0833b0baeef81323e1a0634242fbe55 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1880 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-19No need to contact AMD for firmware anymorePatrick Georgi
We ship it in the 3rdparty repository. Change-Id: Ida52bc7e813f8468910c4ea7838ebb863c52b88a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2060 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-12-12SB800: Add IMC ROM and fan control.Martin Roth
Add configuration for AMD's IMC ROM and fan registers for cimx/sb800 platforms. - Allows user to add the IMC rom to the build and to configure the location of the "signature" between the allowed positions. - Allows for no fan control, manual setup of SB800 Fan registers, or setup of the IMC fan configuration registers. - Register configuration is done through devicetree.cb. No files need to be added for new platform configuration. - Initial setup is for Persimmon, but may be extended to any cimx/sb800 platform. Change-Id: Ib06408d794988cbb29eed6adbeeadea8b2629bae Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12Fix SPI BAR special case in lpc_set_resourcesMartin Roth
There was already a special case for the SPI base address in lpc_set_resources for southbridge/amd/cimx/sb800 and southbridge/amd/agesa/hudson, but it needed to be modified to keep from killing the IMC rom during initialization. As soon as the BAR is disabled by setting the new base address, the IMC dies. The fix is to make sure it's still enabled when setting the new base address instead of setting the new address then re-enabling it. Change the name SPIROM_BASE_ADDRESS to SPIROM_BASE_ADDRESS_REGISTER to more accurately describe what we're using. Change-Id: I216d75b722c4332c239d487111a9880eabf59e91 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1975 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12Claim the SPI bus before writes if the IMC ROM is presentMartin Roth
The SB800 and Hudson now support adding the IMC ROM which runs from the same chip as coreboot. When the IMC is running, write or erase commands sent to the spi bus will fail, and the IMC will die. To fix this, we send a request to the IMC to stop fetching from the SPI rom while we write to it. This process (in one form or another) is required for writes to the SPI bus while the IMC is running. Because the IMC can take up to 500ms to respond every time we claim the bus, this patch tries to keep the number of times we need to do that to a minimum. We only need to claim the bus on writes, and using a counter for the semaphore allows us to call in once to claim the bus at the beginning of a number of transactions and it will stay claimed until we release it at the end of the transactions. Claim() - takes up to 500ms hit claim() - no delay erase() release() claim() - no delay write() release() Release() Change-Id: I4e003c5122a2ed47abce57ab8b92dee6aa4713ed Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1976 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-30AMD S3: Leverage the public SPI routineZheng Bao
Remove the old, unflexible code for storing S3 data in SPI flash. Refer to flashrom. Tested on Parmer. Change-Id: I60a10476befb4afab2b4241f01a988f4a8bb22cd Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1920 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-27Enable the FCH GPP port prior to device enumerationDave Frodin
Change-Id: Ib4401897570f9e4d31c18d05144b5deb6f4523bc Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1873 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
(cosmetical) Change-Id: I3e01d8fbf2d71abcfcbe47efedd2184566c91df7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1748 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-19cimx sb700: change Platform.h to remove some warningsSiyuan Wang
TRACE has redefined warnings in src/southbridge/amd/cimx/sb700/Platform.h, so we do some changes to remove such warnings. Change-Id: I24979e08b83434f91a8fa37cd9f16303fa0b298d Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1499 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-08-30AMD S3: The offset of the nv storage depends on config.hZheng Bao
Change-Id: Ic8410fb706dce677c7218d19030d84b64cda7b7f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1485 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-05AMD SB: Call the rtc update if needed (Propagation)zbao
Apply the change http://review.coreboot.org/1390 to all the AMD southbridge. Change-Id: I8e94014f8883a0408b68355d9aa33aea4373881f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1406 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-07-03AGESA F15 wrapper for Trinityzbao
The wrapper for Trinity. Support S3. Parme is a example board. Change-Id: Ib4f653b7562694177683e1e1ffdb27ea176aeaab Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1156 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-12Update SB800 CIMX FADTMartin Roth
- Add #define to allow the FADT PM Profile to be overridden. - Change the location of the PMA_CNT_BLOCK_ADDRESS to match current documentation. - cst_cnt should be 0 if smi_cmd == 0 - add a couple of default access sizes. - Add a couple of #define values for unsupported C2 & C3 entries. - Add PM Profile override value into amd/persimmon platform. This does not use the #defines in acpi.h so that the files that include this don't all need to start including acpi.h. Change-Id: Ib11ef8f9346d42fcf653fae6e2752d62a40a3094 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1055 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-24cbtypes.h: Unify cbtypes.h used in AMD board's codeVikram Narayanan
Remove all the repeated sections of code in cbtypes.h and place it in a common location. Add include dir in vendor code's Makefile. Change-Id: Ida92c2a7a88e9520b84b0dcbbf37cd5c9f63f798 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/912 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-15Fix fadt legacy free setting.Marc Jones
The fadt legacy free logic was backwards. Change-Id: Ieb21ef335f7514ced70248d0bf8668ddb73cf59f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1030 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-05-12Add legacy free setting and override to fadt.cMarc Jones
The FADT iapc_boot_arch indicates the available information for accessing legacy devices. By default, the setting supports legacy. LEGACY_FREE and/or the iapc_boot_arch field may be customized. Change-Id: I5679741e1f8db923d3c00b57f6a5d813550f3a5e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1024 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-12Merge sb800 fadt fixes from South Station mainboard to southbridge fadt.Marc Jones
The South Station recieved updates that fix a number of fadt problems. South Station now uses the southbridge fadt. Change-Id: Ib990a69a359a4b7eae3431bb4323acd537acda1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1021 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-10Unmark source files as executablesAlec Ari
Change source file modes from 755 to 644 The following files have been grepped for changes: *.c *.h *Kconfig* *Makefile* Change-Id: I275f42ac7c4df894380d0492bca65c16a057376c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1023 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-09Move fadt.c to the cimx sb800 southbridge directory to be shared.Marc Jones
The fadt.c is the same across all the platforms using the sb800 cimx southbridge wrapper. Change-Id: Ifbbfc238732aa46aef96297eaa188b77d27151f3 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1019 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-09Add simple PMIO & PMIO2 read/write routines to CIMX wrapperMartin Roth
These are the PMIO & PMIO2 read & write routines from src/southbridge/amd/sb800/sb800.c & sb800.h for use in the cimx tree. Currently most platforms using CIMX are calling WritePMIO() directly from the src/vendorcode/amd/cimx/sbX00 directories instead of using a wrapper function. These functions only do byte reads & writes. Change-Id: I881a6e2d4ddbba3dbdf4dd33e06313fe88b3682a Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/981 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-12Add Southbridge support for S3.zbao
1. Add some CIMX call for S3. 2. Detect sleep type. Change-Id: I62888e8d8a03987ca88f5c935fa660f6b49a4fe9 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/621 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-12Unify IO APIC address specificationPatrick Georgi
Some places still hardcoded the address instead of using IO_APIC_ADDR. Change-Id: I3941c1ff62972ce56a5bc466eab7134f901773d3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-02Add sb800 spi support.zbao
It is for S3, storing the recovring data in the nonvolatile storage, i.e., flash. Change-Id: Ie9e4f42a80c93d92d2e442f0e833ce06d88294f9 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/620 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-16SB700 southbridge: AMD SB700/SP5100 southbridge CIMX wrapperKerry Sheh
Change-Id: If924b7eb176e7d3d82fa394929b653b1ced3a743 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/561 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-02CIMX wrapper: remove redudant traversing sb800 and sb900 CIMX dirKerry Sheh
AGESA and CIMX build changed from commit 2a830d0b, sb800 and sb900 CIMX dir already traversed in vendorcode Makefile. Change-Id: I5101b22e140725337bf5074b9170e582c8e3bf40 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/602 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-21Persimmon audio codec verb patch.Marc Jones
Verb data is required for the HDA audio codec in the sb800 southbridge. Verb data is not required for mainboards that use G-Series HDMI. It is also a setting the may be boards specific. This fixes issues with Windows audio on Persimmon. Change-Id: I067506871e92078d122cf79872363d8937d47e50 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/490 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-23SB800: Hide unused gpp portsKerry Sheh
Add configure option SB_GPP_UNHIDE_PORTS for mainboard to hide/unhide the unused sb800 gpp ports. Certain gpp port should be hidden, if no device was detected and hotplug feature is disabled for such port. Hidden unused ports makes lspci -vvv get more accurate information under Linux. Test on avalue/eax-785e mainboard. Change-Id: I1d7df0f2ab6ad69b1b99b8bf046411ae7cdb09c0 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-14Fix AMD SB800 (cimx) southbridge code to compile with gcc 4.6Stefan Reinauer
Change-Id: I672135a9b6e3b641ceb655cb00d40ee760c17edc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/268 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-12SB800 RAID: add kconfig option RAID_MISC_ROM_POSITIONKerry Sheh
SB800 RAID ROM require to put the misc ROM to specific position, this patch enable user to put the RAID misc ROM to the right place in the coreboot image. Change-Id: I4fc64df8e091fb0cccd063826ab31a4f198942d1 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/249 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
In order to make sure AHCI/RAID ROM works correctly For SB800_SATA_AHCI or SB800_SATA_RAID mode, SATA should enable bus master and the ahci also should be enabled. Change-Id: I9d9c557816d364d8373fe343860ad5fe45988200 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/248 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12sb800: Add Kconfig option ENABLE_IDE_COMBINED_MODEKerry Sheh
Add this option to enable/disable SATA IDE Combined Mode feature Change-Id: I1ab8acd27947a71baf954f44d0741f81f48e5541 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/231 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11mainboard: complete the sb800 devicetree even device is offKerry Sheh
sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. Change-Id: I76ebad842e90b0f740abbec031165d7c39a80abf Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/230 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11sb800: Add sata ahci/raid mode kconfig optionKerry Sheh
If sb800 sata was configured as ahci or raid mode, give the option to add ROM files. Change-Id: I87a7814930ce3a7c38cde1e235d151223eea2107 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/225 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD SB800 early console use fixefdesign98
This change removes printk's that occur before console init is called. In the best case, these would cause an extremely slow boot, and in the worst case would cause a complete post failure. Change-Id: I50388e71225e95db602aa45835c39126c1c920a3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/216 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-07AMD SB800 southbridge updateKerry She
This patch enables access to the registers of the hardware monitor logical device in the superio via isa ports 0x295/0x296. Previously this was not enabled in the SB8xx LPC device. This is required for initialisation in init_hwm() in src/superio/winbond/w83627hf/superio.c and also by OS-level sensor monitoring such as lm-sensors to access temperature, fan monitoring and control and voltage registers. asrock/e350m1 and advansus/a785e-i mainboard changes are included herein. Change-Id: I2176885549277b335c0c41b48457d09b9b76b703 Signed-off-by: Per Hansen <perh52@runbox.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/159 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-14Move AMD SB800 early clock setup.Scott Duplichan
Move the AMD SB800 early clock setup code that is needed for early serial port operation from mainboard/romstage.c to sb800/bootblock.c. This prevents code duplication and simplifies porting. Change-Id: I615cfec96c9f202d9c154dc6674ec7cbcf4090c3 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/96 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-14Set SB800 ROM decode size based on kconfig.Marc Jones
Change-Id: I46ea26b5534064fe1c7e2ce2b2f12cacf18a4d4d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/94 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
sb800 pci bridge SHOULD enabled by default according to the chipset document, but actually not enabled on some mainboard. enable sb800 pci bridge when told to enable in devicetree.cb. tested on ibase persimmon mainboard. Change-Id: I42075907b4a003b2e58e5b19635a2e1b3fe094c3 Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/63 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 11:25:32 +0000