summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cimx
AgeCommit message (Collapse)Author
2017-02-22southbridge/amd: Add LPC bridge acpi path for Family14 and SB800Tobias Diedrich
Adds the necessary plumbing for acpi_device_path() to find the LPC bridge on the AMD Family14 northbridge with an SB800 southbridge. This is necessary for TPM support since the acpi path to the LPC bridge (_SB.PCI0.ISAB) doesn't match the built-in default in tpm.c (_SB.PCI0.LPCB). Change-Id: I1ba5865d3531d8a4f41399802d58aacdf95fc604 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/18402 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23AGESA binaryPI: Fix PCI ID namespaceKyösti Mälkki
The defines of device IDs reflects the vendor namespace the ID has been allocated from. Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17510 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-07src/southbridge: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: Ibcac5dd60dc7da82bbeeb89ac445a5a1aa56ed3d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16852 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07src/southbridge: Remove whitespace after sizeofElyes HAOUAS
Change-Id: Ic3b599d49a4c03ad8035c558b975f31cb91d253b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16862 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04src/southbridge: Remove unnecessary semicolonElyes HAOUAS
Change-Id: I52c3ec75d44290b758b6e952344aa9a768bc2617 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16857 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-20southbridge/amd: Add space around operatorsElyes HAOUAS
Change-Id: I949ff7de072e5e0753d9c8ff0bf98abfca25798b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16637 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-13southbridge/amd/cimx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/amd/cimx. Change-Id: Ibe2766b956b0ca02be63621aee9a230b16d9923b Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16474 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31src/southbridge: Code formatingElyes HAOUAS
Change-Id: Icfc35b73bacb60b1f21e71e70ad4418ec3e644f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16291 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31src/southbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I01413b9f8b77ecdcb781340f04c2fe9e24810264 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15941 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-12amd/cimx/sb800/pci_devs.h: Update guard #define nameMartin Roth
Change-Id: Ieae41cab97293831a0c49c3b472b9e6c62ba36c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12899 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30SB900 64bit fixesStefan Reinauer
Change-Id: I5ea0f9338ccdd658b5fbec72aa35b4f80d63d4f9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11084 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30SB700: 64bit fixesStefan Reinauer
Change-Id: Ib4b643441a5b887abf73cc55930ea9b01037f6ea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11085 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-29amd/cimx/sb800/late.c: Add comment in `sb800_init()`Paul Menzel
Add a comment explaining what `abcfg_reg(0xc0, 0x01FF, 0x0F4)` does. This is a follow-up for commit 24501cae (AMD cimx/sb800: Initially enable all GPP ports). Change-Id: I5ac263ee088d36a7f7a2d03c1454ed647faa7147 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12190 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24amd/sb800: Make UsbRxMode per-board customizableTobias Diedrich
On my Foxconn nT-A3500 on cold boot the board doesn't survive the soft reboot in the UsbRxMode path and the vendor bios doesn't touch this Cg2Pll voltage setting either. The fixup code for UsbRxMode in src/vendorcode/amd/cimx/sb800/SBPort.c doesn't seem to "CG PLL multiplier for USB Rx 1.1 mode", but rather lowers the Cg2Pll voltage from the hw default of 1.222V to 1.1V by setting Cg2Pll_IVR_TRIM in CGPllConfig5 to 1000. See also USB_PLL_Voltage which is only used in the UsbRxMode code path. However if this is already the efuse/eprom default for the SB800 then UsbRxMode is a no-op, so whether or not it gets executed depends on the very exact hw revision of the southbridge chip and could change between two instances of the same board. UsbRxMode used to be unitialized and was first set to default to 1 in http://review.coreboot.org/6474 (change I32237ff9, southbridge/amd/cimx/sb800: Uninitialized variables in config func): > > Why initialize those to 1? (just curious) > See src/vendorcode/amd/cimx/sb800/SBTYPE.h > git grep 'SbSpiSpeedSupport\|UsbRxMode' > src/vendorcode/amd/cimx/sb800/SBTYPE.h I could not find a corresponding errata in the SB800 errata list, however errata 15 (USB Resets Asynchronously With Port CF9h Hard Reset) might play into this being unsafe to do since the code uses CF9h to reset. So its possible that while previously undefined it still ended up defaulting to 0 and the codepath exercised on my board is simply buggy or there is a difference between a true "SB800" and the "A50 Hudson M1" presumably used on my board. Change-Id: I33f45925e222b86c0a97ece48f1ba97f6f878499 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-30SB800: Port to 64bitStefan Reinauer
Change-Id: I944fb254e9470c80b13c9eef9d6b1177a56e615f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10582 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-06-14amd/cimx/sb800/acpi/smbus.asl: Align commentsPaul Menzel
Change-Id: I1ea1b1efedfea2926a24f06beeb8d7d0464057e5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10543 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-053rdparty: Move to blobsPatrick Georgi
To move 3rdparty to 3rdparty/blobs (ie. below itself from git's broken perspective), we need to work around it - since some git implementations don't like the direct approach. Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-28Kconfig whitespace fixesMartin Roth
trivial whitespace fixes. Mostly changing leading spaces to tabs. Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-27kbuild: automatically include southbridgesStefan Reinauer
This change switches all southbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in southbridge/Makefile.inc or in southbridge/<vendor>/Makefile.inc. In order to be able to drop southbridge/amd/Makefile.inc, some scattered source files had to be moved to a southbridge/amd/common directory, in accordance to what we are doing on other architectures already. This means, vendor and southbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9796 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-19CBMEM: Add LATE_CBMEM_INIT guardsKyösti Mälkki
Our target is to get rid of backup_top_of_ram() and get_top_of_ram() entirely so only declare these with LATE_CBMEM_INIT=y. Change-Id: I54f549fe774996f4d803f9ec527e0fac46f6576f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8749 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
The GCC 4.9.2 update showed that the boot_state_init_entry structures were being padded and assumed to be aligned in to an increased size. The bootstate scheduler for static entries, boot_state_schedule_static_entries(), was then calculating the wrong values within the array. To fix this just use a pointer to the boot_state_init_entry structure that needs to be scheduled. In addition to the previous issue noted above, the .bs_init section was sitting in the read only portion of the image while the fields within it need to be writable. Also, the boot_state_schedule_static_entries() was using symbol comparison to terminate a loop which in C can lead the compiler to always evaluate the loop at least once since the language spec indicates no 2 symbols can be the same value. Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8699 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-23AMD cimx/sb800: Disconnect PCI bridge 0:14.4 from pinsKyösti Mälkki
Some GPIO pins are shared with PCI bridge 0:14.4. As our PCI subsystem currently does not configure PCI bridges that are marked disabled, but remain visible in the hardware, simply setting 0:14.4 disabled in the devicetree does not work here yet. Change-Id: Ib9652e12a888e1d797d879d97737ba4101b7029a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8495 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
The existing code generated invalid ACPI processor objects if the core number was greater than 9. The first invalid object instance was autocorrected by Linux, but subsequent instances conflicted with each other, leading to a failure to boot if more than 10 CPU cores were installed. The modified code will function with up to 99 cores. Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8422 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-14AMD cimx/sb800: Initially enable all GPP portsKyösti Mälkki
PCIe root ports on devices 0:15.0 to 0:15.3 should at first all appear visible in hardware. The real configuration will be done by vendorcode once we call sb_Before_Pci_Init(). Change-Id: I01a46c630aa6d55a94af45da6b78c97df7553e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8387 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Move cimx init for ramstageKyösti Mälkki
This has nothing to do with SATA controller. We only need to fill the table with defaults before we parse devicetree for changes to device configuration. Change-Id: Ic4b28b5992ec9bfdf252f61b1c86b0162243cc95 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8386 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configurationKyösti Mälkki
A set of pins can be configured for GPIO or (parallel) PCI bridge use. When requested configuration is 0:14.4 enabled, register programming must be done before attempting to enumerate devices behind the bridge. When requested configuration is 0:14.4 disabled, we must not even temporarily enable pins for PCI use to avoid spurious GPIO state changes. As our PCI subsystem currently does not configure visible PCI bridges that are marked disabled, we cannot mark 0:14.4 disabled just yet but need to handle pcengines/apu1 as a special case. Drop related dead code. Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Fix console outputKyösti Mälkki
These sb800_enable() messages without newline mess up the log. Change-Id: I1689b68702e08e2a287083835f310f52f495c451 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8384 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-10ACPI: Add acpi_is_wakeup_s3() for romstageKyösti Mälkki
This replaces acpi_is_wakeup_early(). Change-Id: I23112c1fc7b6f99584bc065fbf6b10fb073b1eb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8187 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06AMD platforms: fix callout_entry doxygen errorsMartin Roth
Somewhere along the line, the sb_cfg parameter name was changed to config, but this wasn't carried into the documentation or the function prototypes everywhere. Change-Id: Iccb0829c2f50370dddb70af915a6759316c4727a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8098 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06Remove AMD's "Release Content" doxygen from coreboot filesMartin Roth
These comments are left over and are not relevent in the coreboot code, but created a new section titled "Release Content" in the doxygen documentation produced by the coreboot code. In an effort to clean up the output, I'm removing these doxygen comments. Change-Id: I4d7be3313a2ab6c140b4f3afe70dffc4abba7bca Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8069 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-30drivers/pc80/mc146818rtc: Assume we always have ALTCENTURYGabe Black
This patch has a rather twisted history. It was originally split off from a chromium patch, which moved ALTCENTURY to Kconfig. However, since we have no user without ALTCENTURY, we've agreed that the best way to proceed is to eliminate the non-ALTCENTURY case entirely. The old commit message and identifiers are kept below for reference: The availability of "ALTCENTURY" is now set through a kconfig variable so it can be available to the RTC driver without having to have a specialized interface. BUG=None TEST=Built and booted on Link with the event log code modified to use the RTC interface. Verified that the event times were accurate. BRANCH=nyan Original-Change-Id: Ifa807898e583254e57167fd44932ea86627a02ee Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197795 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> This is the second half the following patch. (cherry picked from commit 9e0fd75142d29afe34f6c6b9ce0099f478ca5a93) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8e871f31c3d4be7676abf9454ca90808d1ddca03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7987 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-20AGESA: Add amd_initcpuio() and amd_initmmio()Kyösti Mälkki
These are not wrappers for AGESA as they do not enter vendorcode at all. We expect most of the added fixme.c file to be written without use of AMDLIB.h and parts relocated as northbridge enable_resources(). Change-Id: Iba6d59e2a7672349208e9a65fcd2cb1094ab7d50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7815 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-19southbridge/amd/cimx/sbX00/early.c: Update grammar in commentsMartin Roth
Along with the spelling fixes, it was requested that I correct this comment. Updating "LocateImage() take minutes" to "LocateImage() takes minutes" everywhere that comment occurs. Change-Id: I28cd47476cb42ba3e404e064695a7fd97d581834 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7848 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17southbridge/amd agesa & cimx spelling fixesMartin Roth
Trivial fixes, but the editor highlights them, and it's easy to go through a bunch of files while I'm otherwise idle. Change-Id: I5d2d4ba098d2a95f7643f000f4b48b3349a8e6cf Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7839 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-09spi: Eliminate the spi_cs_activate and spi_cs_deactivate functions.Gabe Black
They were only used internal to the SPI drivers and, according to the comment next to their prototypes, were for when the SPI controller doesn't control the chip select line directly and needs some help. BUG=None TEST=Built for link, falco, and rambi. Built and booted on peach_pit and nyan. BRANCH=None Original-Change-Id: If4622819a4437490797d305786e2436e2e70c42b Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/192048 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 1e2deecd9d8c6fd690c54f24e902cc7d2bab0521) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ida08cbc2be5ad09b929ca16e483c36c49ac12627 Reviewed-on: http://review.coreboot.org/7708 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa: Make Porting.h common between familiesEdward O'Callaghan
Change-Id: Ica17b2452498f30b710533caf610c9f0c1a0452c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7594 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-11-26agesa/family12: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I944e35b04612eca8add80c9f546df99a9a930ac8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7036 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-26agesa/family15: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I3847eb1524a5a816cd4885a31d703b410804c1f0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7032 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-22amdfam10: Move to per-device ACPIVladimir Serbinenko
Change-Id: I9ce2333e1ea527843f83d411dea2a669263156c2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7027 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-14build system: improve portabilityPatrick Georgi
There are too many differences, and calculating relatively large integer using floats might not be the brightest idea anyway. Also avoid relying on ls(1) output format to determine file sizes. Change-Id: I5f96c036737b74e20f525c3dc9edc011ad403662 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7447 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-05soutbridge/*/bootblock: Use pci_dev_t over device_t typedefEdward O'Callaghan
Change-Id: I693b09d588ed6d56177cf86c23497231623b69c0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7193 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-10-22amd/torpedo amd/dinar: Sanitize agesawrapper headerKyösti Mälkki
Change-Id: I3badb18839773e38834de967a51c29a306975d20 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7152 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
Most of the code related to the mc146818 is not related to the RTC and is really for managing the CMOS storage. Since we intend to add a generic API for RTC drivers it's inconvenient for those functions to have an rtc_ prefix. This CL renames those functions so they start with cmos_ instead. There are some places where rtc_init was called with a comment that says something about starting the RTC. That wasn't correct before (the RTC is always running), but it looks a little odd now that the function is called cmos_init. This CL also opportunistically cleans up some style problems in this file. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/197794 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788) Removed the addition of stdint.h to mc146818rtc.h since types.h is now included. Changed rtc_init to cmos_init for fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex. Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-19AGESA fam12 fam14 fam15: Sanitize BiosCallOuts headersKyösti Mälkki
Change-Id: Ic08f1f2fdbcf6164eb1a0330f9134da3fdb978d7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7114 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-19AGESA fam12 fam14 fam15: Use common agesa_readSpd()Kyösti Mälkki
Remove northbridge specific callouts for AGESA_READ_SPD. Move low-level SMBus code to southbridge. Change-Id: I5fc91c49d9ef8e0af1c4d8194f857c61ce417d1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7113 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-18cimx/sb800: fix pedantic gcc errorRonald G. Minnich
A cast did not work for me, but this variable did. This is one of the many issues with building e3501 I'm running into. Change-Id: Ifb19a17770604f2d63dfef762d08200add77ee34 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7122 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16ACPI: Remove CONFIG_GENERATE_ACPI_TABLESVladimir Serbinenko
As currently many systems would be barely functional without ACPI, always generate ACPI tables if supported. Change-Id: I372dbd03101030c904dab153552a1291f3b63518 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-13southbridge/amd/cimx/sb800: Uninitialized variables in config funcEdward O'Callaghan
Both 'SbSpiSpeedSupport' and 'UsbRxMode' are uninitiated upon return from a 'sb800_cimx_config()' call. Change-Id: I32237ff97fafc3e69627d427e54268dcb039e12c Found-by: Coverity Scan Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6474 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-07-24southbridge/amd: Remove trailing whitespaceElyes HAOUAS
Change-Id: I25cdfe6b3c8067793620677c62251e78704f7851 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17southbridge,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: Ied03e8814ea13f0e677a1d34da19efe6dfebf72f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6288 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-17southbridge,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I8ef5f1571ad14ead2d4cc0d61b6b7133d7fc8550 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6293 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-14AGESA fam15: Fix entry to cimx/sb900Kyösti Mälkki
Move SB900 call to match comments and changes already made for family14 et al. Change-Id: I22aa0bbeeabf9cff929c49c23014005bc3d53ccb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6238 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA CIMx: Move late init out of get_bus_conf()Kyösti Mälkki
Followup deals further with Fam15 case. For unknown reasons calls were commented out for amd/dinar and they remain that way. Change-Id: Ie0a25fbb6f5378019fbf0f19a02acf024d79817e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6237 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AMD SPI: Optimise for longer writesKyösti Mälkki
Leave it to the implementation of flash->write() to split the writes to match SPI controller and SPI flash part restrictions. This allows for some optimisation for auto-address-increment (AAI) commands. Kconfig AMD_SB_SPI_TX_LEN can be kept as local. Change-Id: I4a8bc55ab7eb0eeda8f25003a8f5ff2a643ab7a7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6164 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14SPI: Split writes using spi_crop_chunk()Kyösti Mälkki
SPI controllers in Intel and AMD bridges have a slightly different restriction on how long transactions they can handle. Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6163 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-08southbridge: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I5484ebb665453777cc3b2561be6e50c787f1a257 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6209 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-05spi: Change spi_xfer to work in units of bytes instead of bits.Gabe Black
Whenever spi_xfer is called and whenver it's implemented, the natural unit for the amount of data being transfered is bytes. The API expected things to be expressed in bits, however, which led to a lot of multiplying and dividing by eight, and checkes to make sure things were multiples of eight. All of that can now be removed. BUG=None TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI errors in the firmware log. Built for rambi. BRANCH=None Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/192049 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> [km: cherry-pick from chromium] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6175 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05spi: Remove unused parameters from spi_flash_probe and setup_spi_slave.Gabe Black
The spi_flash_probe and and spi_setup_slave functions each took a max_hz parameter and a spi_mode parameter which were never used. BUG=None TEST=Built for link, falco, rambi, nyan. BRANCH=None Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/192046 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> [km: cherry-pick from chromium] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6174 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-03AGESA: Clean separation of SPI flashKyösti Mälkki
To be precise, wakeup from S3 does not involve SPI writing, while preparing for it on cold power-ons currently does. For S3DataTypeMtrr storage is changed such that the first 4 bytes is the length of data stored like with the other two S3DataType. Change-Id: Id920650474530d4191075da4ef70daa66c904c5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6085 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-07-02AMD/agesa: Add functions for AMD PCI IRQ routingDave Frodin
Port the changes that were made in amd/cimx to amd/agesa as were done in: commit c93a75a5ab067f86104028b74d92fc54cb939cd5 Author: Mike Loptien <mike.loptien@se-eng.com> Date: Fri Jun 6 15:16:29 2014 -0600 AMD/CIMx: Add functions for AMD PCI IRQ routing This change also moves the PCI INT functions to southbridge/amd so that they can be used by CIMX and AGESA. The amd/persimmon board is updated for this change. Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Change-Id: I525be90f9cf8e825e162d53a7ecd1e69c6e27637 Reviewed-on: http://review.coreboot.org/6065 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-25AGESA: Move config parameters for non-volatile S3 dataKyösti Mälkki
These parameters are not specific to the southbridge device, but the implementation of S3 storage defined by CPU code. Change-Id: Ic341cc2b7669cf8e3e920c48473826ec03fc7d8d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6081 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-25Declare acpi_is_wakeup_early() only onceKyösti Mälkki
Change-Id: I5314d76168c40a6327d4a9ac3b4f4fb05497d6fc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4525 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21AMD cimx/sb800: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: If237c2fcd52f50d5fa0cad5a02a941386b085f2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6077 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-12southbridge/amd: Change #if defined to #if IS_ENABLEDDave Frodin
The IMC functions were being called and timing out when the CONFIG_SB800_IMC_FWM/CONFIG_HUDSON_IMC_FWM were defined as 0. Changing to a IS_ENABLED will keep the IMC handshake from occuring if the IMC firmware isn't running. Tested on a Persimmon platform which makes three calls to spi_claim_bus() with each call timing out after 500ms. Change-Id: I5d4bbcecf003b93704553b495a16bcd15f66763b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5974 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-11amd/southbridge/lpc: SPI BAR has fixed size/locationDave Frodin
The CIMX sb700/sb800/sb900 and agesa/hudson code was treating the LPC SPI BAR as a normal PCI BAR. This will set the resources for a fixed size at a fixed address. This was tested on hp/abm, amd/persimmon, and gizmosphere/gizmo boards. Change-Id: I1367efe0bbb53b7727258585963f61f4bd02ea1d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5947 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11AMD/CIMx: Add functions for AMD PCI IRQ routingMike Loptien
The PCI_INTR table is an Index/Data pair of I/O ports 0xC00 and 0xC01. This table is responsible for physically routing IRQs to the PIC and IOAPIC. The settings given in this table are chipset and mainboard dependent, so the table values will reside in the mainboard.c file. This allows for a system to uniquely set its IRQ routing. The function to write the PCI_INTR table resides in cimx_util.c because the indices into the table have the same definitions for all SBx00 FCH chipsets. The next piece is a function that will read the PCI_INTR table and program the INT_LINE and INT_PIN registers in PCI config space appropriately. This function will read a devices' INT_PIN register, which is always hardcoded to a value if it uses hardware interrupts. It then uses this value, along with the device and function numbers to determine an index into the PCI_INTR table. It will read the table and program the corresponding value into the PCI config space register 0x3C, INT_LINE. Finally, it will set this IRQ number to LEVEL_TRIGGERED on the PIC because it is a PCI device interrupt and the must be level triggered. For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN value hardcoded to 2. This corresponds to PIN B. On the Persimmon mainboard, I want the USB device to use IRQ 11. I will program the PCI_INTR table at index 0x31 (this USB device index) to 11. This function will then read the INT_PIN register, read the PCI_INTR table, and then program the INT_LINE register with the value it read. It will then set the IRQ on the PIC to LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4. Also, the SB700 has slightly different register definitions than the newer SB800 and SB900 so it needs its own set of #defines for the pci_intr registers. Only the Persimmon mainboard is adapted to this change as an example for other mainboards. Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5877 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-25southbridge/amd/cimx/sb900: Unused func smbus_delay()Edward O'Callaghan
Spotted by Clang Change-Id: I14c099625db6f38fd0630b8864cf2a702b81d353 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5832 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-22southbridge/amd/cimx/sb700: Unused func smbus_delay()Edward O'Callaghan
Spotted by Clang. Change-Id: Ie4bed914ab694f4e96155140b8b54b6eb96d70d7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5819 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-14southbridge/amd/cimx/sb800: Unused func smbus_delay()Edward O'Callaghan
Change-Id: Icc12aafc1462c08bca77a1798d4fae86b8250708 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5748 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
We should configure i8254/i8259 down in to the southbridge rather than romstage of every AGESA/CIMx board much like Intel boards do. Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5669 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1. Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-20AMD cimx sb700/sb800/sb900: Fix NODE_PCI and use of MAX_PHYSICAL_CPUSKyösti Mälkki
Match the definition of NODE_PCI() with get_node_pci(), so romstage and ramstage agree of the PCI BDFs for nodes. Note that all board have CONFIG_CDB = 0x18 and the maximum for nodes = 8, so we always have (CONFIG_CDB + x) < 32. Change-Id: I676ee53a65ef5b1243df2c5889577dd987c8fc9c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5536 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-13cimx/sb800/cfg.c: Cut out purposeless ROM reading noise.Edward O'Callaghan
Follow along hudson, cut out "SLP_TYP type was 0" excessively filling the buffer. We could make this conditional on non-zero? Change-Id: Iffd4c146b2ac4f57dbc3a011a683c92b6e132e39 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5495 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
Read this variable from PCI configuration capabilities list instead. Change-Id: I0cfe981833873397c32cd3aa2af307f35f01784b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11amd/cimx: fix sb(8|9)00 NULL type redefineAaron Durbin
It is inappropriate for chipset code to be redefining types -- especially NULL to a non-pointer type. There's only one non-straight forward change. A condition being checked was '!ptr_type == NULL' (0 as int). That check is actually 'ptr_type != NULL'. Change-Id: Iab5733e5a573baba6fec94e0c955ba4fad72c836 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5088 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-06uart8250: Drop unused declarationsKyösti Mälkki
Change-Id: Ie915ef9dbc45604bd5ca1b610acb12af634fdebe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5138 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-04AMD cimx/sb800: Set SPI frequency and prefetchKyösti Mälkki
Broken with/since commit d1cb0eec. Original intention was to set the frequency for 'Fast Read' command in bits 15..14, and enable 'Fast Read' command. Modified register contains SPI frequency for 'Normal Read' command in bits 13..12. Default for this is 11b for 16.5 MHz. Existing code unintentionally clears these bits, increasing SPI frequency to 66MHz for 'Normal Read' command. This is above specifications for many common SPI flash components and also makes flashrom older than 0.9.7-r1750 to operate unreliably on read/write/erase for these platforms. Change-Id: I30109e2a0410c0bb0bdc968ea71787396b32e761 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5089 Tested-by: build bot (Jenkins) Reviewed-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-01-06usbdebug: Fix hidden menuconfig optionsKyösti Mälkki
Options for selecting the USB port and controller for usbdebug were unintentionally hidden with commit 8232bc2c on AGESA platforms using cimx/sb700 or cimx/sb800. Change-Id: Ibacc81a580519fe7fa86f08374046625327340b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4607 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
Clean up superfluous line terminators. Change-Id: If837b4f1b3e7702cbb09ba12f53ed788a8f31386 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4562 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)