| Age | Commit message (Collapse) | Author |
|---|
|
The following boards are setting DTPC tablet mode values without
corresponding device tree values, meaning they are effectively setting
"random" values for tablet mode:
1. Cezanne
2. Mendocino
The device tree has tablet mode disabled, so the code should never be
exercised, but this CL removes it entirely to cleanup "dead" code.
BRANCH=none
BUG=b:217911928
TEST=Build nipperkin
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ide96f255b69670d1b4c37ca2f94cc3504a958b57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change removes all references to HybridStorageMode
UPD since it has been deprecated starting from FSP v2344_00
BUG=b:245167089
TEST=build coreboot mtlrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I16eb33cb1260484b0651d40211323c6ae986a546
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
D3Cold isn't supported in S3.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I072f47737ef38c44b6a676019e9a73868ff17e5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67413
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of just printing the fatal errors, do early return so that
boot up time will be reduced during display init failure. Remove malloc
allocation and make tu a local variable.
Change-Id: I51f7a86d143128d2c426fb8940ff34a66152b426
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66975
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor AMD DPTC tablet mode in preparation for adding low/no battery
DPTC settings.
1. Refactor and simplify acpigen_write_alib_dptc() into the following
functions:
- acpigen_write_alib_dptc_default()
- acpigen_write_alib_dptc_tablet()
2. Add device tree register value dptc_tablet_mode_enable to control
whether DPTC tablet mode is enabled for a variant.
3. Add dptc.asl to perform the necessary ACPI checking before modifying
the DPTC settings.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Build nipperkin
TEST=Boot skyrim
Change-Id: I2518fdd526868c9d5668a6018fd3570392e809c0
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Thermal configuration registers are now located behind PMC PWRMBASE
for MeteorLake as well (same as ADL). Hence, using thermal common code
to sets the thermal low threshold as per mainboard provided
`pch_thermal_trip`.
Note: These thermal configuration registers are RW/O hence, setting
those early prior to FSP-S helps coreboot to set the desired low
thermal threshold for the platform.
TEST=Dump thermal configuration registers PWRMBASE+0x150c etc on
Google/rex prior to FSP-S shows that registers are now programmed
based on 'pch_thermal_trip' and lock register BIT31 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1d6b179a1ed43f00416d90490e0a91710648655e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67462
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch updates `pch_thermal_trip` as per Intel MTL vol1
chapter 14.
Additionally, dropped the `FIXME` tag for `pch_thermal_trip`.
TEST=Able to boot the Google/rex to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I86f97c9245fe953832d3b408aa902d6a41e55651
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67461
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch drops redundant MCHBAR programming in romstage as bootblock
already done with MCHBAR setting up.
TEST=Able to boot Google/Rex to ChromeOS and MCHBAR is set to correct
value as per iomap.h
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic2c05f47ab22dc7fe087782a1ce9b7b692ea157e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch disables FSP UPDs (`VtdDisable` and `VmxEnable`) as kernel
cmdline still passes `intel_iommu=off` to turn off virtualization.
BUG=b:241746156
TEST=Able to boot Google/rex to ChromeOS UI.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I21e178a93e311889f2ab7d1a08230d21b051f45e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67452
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
TEST=build pass.
BUG=none
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Change-Id: Iff39486dfad556a3104b2f2b6811c34c2ded6954
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable the protection for DEVAPC registers of AO domain.
TEST=build pass.
BUG=b:244250435
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I8535438d4c7da29c9dcd97be9a2af05ea4690064
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67434
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the previous patch (CB:60317), only basic settings were added. Now
complete DEVPAC settings on MT8186.
1. Update permission setting
2. Update master domain setting:
- domain 4: SCP
- domain 5: SPM
3. Set domain remap
- MMSYS (4-bit to 2-bit)
TEST=test on kernel correctly.
BUG=b:204229221
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I40a9b115fb21b6b955fde358241f4483b85e3db3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67433
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. There are two power sources for CPU:
- Logic power (VPROC).
- SRAM power (VSRAM_PROC).
2. There is a constraint between VPROC and VSRAM_PROC:
- 0mV <= VSRAM_PROC - VPROC <= 250mV.
With software control, the constraint might not always hold. Therefore,
we enable hardware tracking from PMIC MT6366 to ensure the constraint
is met automatically.
BUG=b:236353282, b:241615706
TEST=meet the constrain correctly when adjusting the voltage.
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Change-Id: I6012c57e60c009f1d599b57aab1c2526ee789208
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67436
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Expose configuration of Intel PAVP (Protected Audio-Video Path, a
digital rights protection/management (DRM) technology for multimedia
content) to Kconfig.
TEST=Able to boot Google/rex to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I416346995d744990054c8e0c839ada82c84b7550
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67423
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI ID taken from Intel doc #569262.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I31d4b7edf3288794c86a6d2b78acdc4cf0ac611f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI ID taken from Intel doc #569262.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5812e536f3e1c49a272a0b337cc69f3d8f30677f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67402
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Missing power limit setting for Alder-Lake-N 7W soc.
Document reference: 645548 and 646929
BUG=b:245440443
BRANCH=None
TEST=Build FW and test on nivviks board and there is no error
message "unknown SA ID: 0x4617, skipped power limits configuration."
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Change-Id: Iefe17f5b574cc319fe9aad3850401a8aa8e31270
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change the name of the CALIBRATION_REGION definitions used in two
separate locations. This conflict was causing an error for the
lint-001-no-global-config-in-romstage test.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If6734f2a7d9be669586ea350fb9979fcd422b591
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable configuration to build with MT8186 arm-trusted-firmware drivers.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id16405c84f6e0a2e21f95cc45babf85bd980b43e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67356
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the APOB_HASH feature. This improves boot times by ~10ms.
BUG=b:193557430
TEST=boot to OS and verify boot time improvement
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9628b67cd3206ffdbef23162c453dc183c69e5a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67377
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Comparing the APOB in RAM to flash takes a significant amount of time
(~11ms). Instead of comparing the entire APOB, use a fast hash function
and compare just that. Reading, hashing, and comparing the hash take
~70 microseconds.
BUG=b:193557430
TEST=compile and boot to OS in chausie with and without this option set
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I241968b115aaf41af63445410660bdd5199ceaba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
dptc_enable is being treated as a bool, so convert to explicitly be a
bool.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Build guybrush
TEST=Build skyrim
Change-Id: I0e93d892b3b8016221812c8b9ec6c257dcf13ef5
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67188
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass the reset gpio parameter to BL31 to support SoC reset.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The implementations of register_reset_to_bl31() are the same for
MedaiTek platforms, so we extract them to soc/common/bl31.c.
BUG=None
TEST=build pass
Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some of the pll settings are incorrect, which cause problems in GPU
after booting into kernel.
- MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix
it to enable MFGPLL properly.
- Switch SPMI clock muxes to 260M to avoid kernel hang while probing
SPMI kernel driver.
TEST=GPU bringup correctly.
BUG=b:233720142
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
The header file `compiler.h` is automatically included in the build by
the top level makefile using the command:
`-include $(src)/commonlib/bsd/include/commonlib/bsd/compiler.h`.
Similar to `config.h`, 'kconfig.h`, and 'rules.h`, this file does not
need to be included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5d3eb3f5e5f940910b2d45e0a2ae508e5ce91609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The header file `rules.h` is automatically included in the build by the
top level makefile using the command:
`-include src/soc/intel/common/block/scs/early_mmc.c`.
Similar to `config.h` and 'kconfig.h`, this file does not need to be
included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes a hidden issue present inside FSP-S while coreboot
decides to skip performing MP initialization by overriding FSP-S UPDs
as below:
1. CpuMpPpi ------> Passing `NULL` as coreboot assume FSP don't need
to use coreboot wrapper for performing any
operation over APs.
2. SkipMpInit -----> Set `1` to let FSP know that coreboot decided
to skip FSP running CPU feature programming.
Unfortunately, the assumption of coreboot is not aligned with FSP when
it comes to the behaviour of `CpuMpPpi` UPD. FSP assumes ownership of
the APs (Application Processors) upon passing `NULL` pointer to the
`CpuMpPpi` FSP-S UPD.
FSP-S creates its own infrastructure code after seeing the CpuMpPpi
UPD is set to `NULL`. FSP requires the CpuMpPei module, file name `UefiCpuPkg/CpuMpPei/CpuMpPei.c`, function name `InitializeCpuMpWorker`
to perform those additional initialization which is not relevant for
the coreboot upon selecting the SkipMpInit UPD to 1 (a.k.a avoid
running CPU feature programming on APs).
Additionally, FSP-S binary size has increased by ~30KB (irrespective of
being compressed) with the inclusion of the CpuMpPei module, which is
eventually not meaningful for coreboot.
Hence, this patch selects `MP_SERVICES_PPI_V2_NOOP` config
unconditionally to ensure pass a valid pointer to the `CpuMpPpi` UPD
and avoid APs getting hijacked by FSP while coreboot decides to set
SkipMpInit UPD.
Ideally, FSP should have avoided all AP related operations when
coreboot requested FSP to skip MP init by overriding required UPDs.
TEST=Able to drop CpuMpPei Module from FSP and boot to Chrome OS on
Google/Redrix, Kano, Taeko devices with SkipMpInit=1.
Without this patch:
Here is the CPU AP logs coming from the EDK2 (open-source)
[UefiCpuPkg/CpuMpPei/CpuMpPei.c] when coreboot sets `NULL` to the
CpuMpPpi UPD.
[SPEW ] Loading PEIM EDADEB9D-DDBA-48BD-9D22-C1C169C8C5C6
[SPEW ] Loading PEIM at 0x00076F9A000 EntryPoint=0x00076FA24E2
CpuMpPei.efi PROGRESS CODE: V03020002 I0
[SPEW ] Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE
[SPEW ] Notify: PPI Guid: F894643D-C449-42D1-8EA8-85BDD8C65BDE,
Peim notify entry point: 76FA0239
AP Loop Mode is 2
GetMicrocodePatchInfoFromHob: Microcode patch cache HOB is not found.
CPU[0000]: Microcode revision = 00000000, expected = 00000000
[SPEW ] Register PPI Notify: 8F9D4825-797D-48FC-8471-845025792EF6
Does not find any stored CPU BIST information from PPI!
APICID - 0x00000000, BIST - 0x00000000
[SPEW ] Install PPI: 9E9F374B-8F16-4230-9824-5846EE766A97
[SPEW ] Install PPI: 5CB9CB3D-31A4-480C-9498-29D269BACFBA
[SPEW ] Install PPI: EE16160A-E8BE-47A6-820A-C6900DB0250A
PROGRESS CODE: V03020003 I0
With this patch:
No instance of `CpuMpPei` has been found in the AP UART log with FSP
debug enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8ebe0bcfda513e79e791df7ab54b357aa23d295c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66706
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Intel platforms have soft straps stored in the SI_DESC FMAP section
which can alter boot behavior and may open up a security risk if they
can be modified by an attacker. This patch adds the SI_DESC region to
the list of ranges covered by GSC verification (CONFIG_VBOOT_GSCVD).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0f1b297e207d3c6152bf99ec5a5b0983f01b2d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66346
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new
hwcrypto_allowed argument, to potentially let them try to call the
vb2ex_hwcrypto API for hash calculation. This change will open hardware
crypto acceleration up to all hash calculations in coreboot (most
notably CBFS verification). As part of this change, the
vb2_digest_buffer() function has been removed, so replace existing
instances in coreboot with the newer vb2_hash_calculate() API.
Due to the circular dependency of these changes with vboot, this patch
also needs to update the vboot submodule:
Updating from commit id 18cb85b5:
2load_kernel.c: Expose load kernel as vb2_api
to commit id b827ddb9:
tests: Ensure auxfw sync runs after EC sync
This brings in 15 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Add additional DPTC parameter IDs that are necessary when throttling the
SOC due to low/no battery.
These additional parameters are used in later CLs.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Build nipperkin
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I9e944d7c620414ec92d08a3d1173ba281d593ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67182
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enabling Bus Master isn't required by the hardware, so we shouldn't
need to enable it at all. However, some payloads do not set this bit
before attempting DMA transfers, which results in functionality
failure. For example: in this case, unable to see the developer screen
in Depthcharge.
In the prior IA SoC platform, FSP/GFX PEIM does the BM enabling for
the IGD BAR resources but starting with the MTL platform, it fails
to do so resulting into inability to see the Pre-OS display.
BUG=b:243919230 ([Rex] Unable to see Pre-OS display although GFX
PEIM Display Init is successful during AP boot)
TEST=Able to see the developer screen with eDP/HDMI while booting
the Google/Rex.
Also, this change doesn't impact the previous platforms
(ADL, TGL, CML etc.) where the BM is default enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9ad9eee8379b7ea1e50224e3fabb347e5f14c25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Definition of FIRMWARE_LOCATION, POUND_SIGN, DEP_FILES,
amd_microcode_bins are moved to common Makefile.inc.
Change-Id: I5a0ea27002e09d0b879bafad37a5d418ddb4e644
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62658
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Add the headers for 2.2.3.1, which includes the following changes
over 2.2.0.0:
• [Implemented]GLK: XHCLKGTEN Register setting causes S0ix entry
failure in less than 5 cycles when a USB2 Ethernet Dongle is
connected. Refer GLK BIOS Spec Volume1 CDI# 571118 under chapter
7.20.6 for new Register settings.
• [Implemented] [GLK/GLK-R] DDR4 16Gb SDP Memory support for Gemini
Lake/Gemini Lake – R
• [Update] MRC new version update to 1.38.
• [Fixed][GLK-R][WLAN] Removed the DSW function - Wake on LAN from
S4 issue with latest Wifi driver.
[Update] MRC new version update to 1.39. Included fix for
MinRefRate2xEnable and support for Rowhammer mitigation.
• [Fixed] Disable Dynamic DiffAmp and set CTLE from 7 to 5. This
change specific to DDR4 memory configuration.
• GLK Klocwork Fix
• [Update] MRC new version update to 1.40.
Added in a separate directory as the default. The 2.2.0.0 headers
were left and will be used for Google boards, as some offsets have
moved.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I09498368b116c2add816eeada2fa4d0dba6e5765
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES and remove the
TODO from SOC_AMD_COMMON_BLOCK_HAS_ESPI.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90e3bf3f196e22b428b01ea0437c1224702d2b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Compile-time support of DPTC is controlled by
EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes
EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value
SOC_AMD_COMMON_BLOCK_ACPI_DPTC.
Each variant's run-time support of DPTC continues to be controlled by
the variant's overridetree.cb "dptc_enable" value.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1.
References:
RaptorLake External Design Specification Volume 1 (640555)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs
its own firmware to enable SPM suspend/resume function which turns off
several resources such as DRAM/mainpll/26M clk when linux system
suspend.
SPM is an essential component on MediaTek SoC, so we initialize PPM
in soc_init(). For MT8188, SPM will handshake with DPM to do
initialization, so we need to call spm_init() after dpm_init().
This SPM flow adds 33ms to the boot time.
firmware log:
mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs
SPM: spm_init done in 33 msecs, spm pc = 0x400
TEST=spm pc is 0x400 which is in idle state.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and
MT8188, so we move them to common/spm.c.
TEST=build pass.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The unit of current_clk in pmif_ulposc_check() should be MHz. We use
pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz.
Without this modification, the judgement in pmif_ulposc_check() is
alway wrong due to the wrong unit.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add basic DEVAPC (device access permission control) driver.
DEVAPC driver is used to set up bus fabric security and data protection
among hardwares. DEVAPC driver groups the master hardwares into
different domains and gives secure and non-secure property. The slave
hardware can configure different access permissions for different
domains via DEVAPC driver.
1. Initialize DEVAPC.
2. Set master domain and secure side band.
3. Set default permission.
TEST=check logs of DEVAPC ok.
BUG=b:236331724
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some enums and functions are the same in DEVAPC driver for MT8195,
MT8186, and MT8188, so we move them to common folder.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPM is a hardware module for DRAM power management, which is used for
DRAM low power mode.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common
folder.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Ths new Method, GSCI, allows control over whether or not IRQs are routed
as SCI#s for the given GPIO.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic61caaf77d2c6e295e67a1501544e8b8fc6f3b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IMHO, using bitfields directly in the Field declaration makes the ASL
code more readable then directly manipulating the entire 32-bit dword.
TEST=ACPI code using several of these Methods still works
(google/agah dGPU ACPI code)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I9909700022d8b55db3f5208010bdff11ddaf4e7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66812
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CPPC table value for UEFI BIOS has been changed. The code has been
merged to AGESA. We can get the value by dumping ACPI table. Then we
align the coreboot code with the new value.
BUG=b:190420984
Change-Id: I091ab3bbc5f94961f8b366a3fa00f50f5c9fa182
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Rename pcie5 alias as pcie5_0 since raptorlake is adding a new pcie5 RC.
BRANCH=firmware-brya-14505.B
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee669e68e3607b7ffec9f0800e9f0a916defd498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The size of the input parameter to RESET_SYSTEM svc call is expected to
be 4 bytes. Fix the reset_system type from enum to uint32_t.
BUG=b:243476183
TEST=Build and boot to OS in Skyrim with PSP verstage. Trigger a system
reset to ensure that the system is reset successfully.
Change-Id: I6319a1dfc89602722c1c2b1c4ee744493ae8b33f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67117
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore,
we select this configuration to enable it.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The emi.c is the same for MT8186 and MT8188, so we could move it to
the common folder and reuse it.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to
run fast calibration for MT8188 using blob.
DRAM fast calibration logs:
DRAM-K: Fast calibration passed in 19530 msecs
dram size (romstage): 0x200000000
TEST=Fast calibration pass.
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- Use common SoC drivers for DRAM calibration support.
- Remove emi.h because sdram_size() is already declared in
common/include/soc/emi.h.
- Add dramc_param.h and dramc_soc.h to prepare for implementation of
DRAM full calibration.
TEST=build pass
BUG=b:233720142
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The patch update MTL_USE_COREBOOT_MP_INIT Kconfig description.
TEST=Build code for MTL
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I38609cb03714084dd9092f41dd6e5b418a7f120a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per MTL processor EDS.
TEST= Able to build and boot RVP.
Confirmed TME supported mode detected via temporary debug prints and MSR 0x9ff indicates activated.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Id368925504d81025239e94698d2cb0e2266a5a96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66949
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I68667d084001c753e74ba480fa7b6e09b1b88cb8
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66369
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Signed-off-by: John Zhao <john.zhao@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8dcee90080c6e70dadc011cc1dbef3659fdbc8f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66951
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors p2sb_execute_sideband_access() to be able to
handle SBI operations in both SMM and non-SMM scenarios.
Prior to FSP-S operation being done, the IOE P2SB device will be
visible on the PCI bus hence, performing the SBI operation using IOE
P2SB doesn't involve unhide/hide operation.
Post FSP-S, the IOE P2SB device is hidden.
Additionally, SBI operations can't be performed as is. The only
possible way to send SBI is inside SMM mode and to do that, coreboot
needs to unhide the P2SB device prior to sending the SBI and hide
it post sending SBI.
As a result, the p2sb_execute_sideband_access() function has been
refactored to manage these cases seamlessly without users of the
p2sb_execute_sideband_access() actually being bothered about the
calling mode.
BUG=b:239806774
TEST=Able to perform p2sb_execute_sideband_access() function call in
both SMM and non-SMM mode without any hang/die.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iafebd5190deb50fd95382f17bf0248fcbfb23cb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Only 16 MByte of the SPI flash can be mapped right below the 4 GB
boundary.
In case of a larger SPI flash size, still only the 16 MByte region
starting at 0xff000000 can be configured as WRPROT and be reserved for
the MMIO mapped SPI flash region. The next 16 MByte MMIO region starting
at address 0xfe000000 contain for example the LAPIC MMIO region, the
ACPIMMIO region and the UART/I2C controller MMIO regions which shouldn't
be configured as WRPROT. Reserving this region for the MMIO mapped SPI
flash would also result in an overlap with the MMIO resources mentioned
above.
In the case of a smaller SPI flash, reserving the full 16 MByte flash
MMIO region makes sure that the resource allocator won't try to put
anything else in the lower parts of the 16 MByte SPI mapping region.
To avoid the issues described above, always reserve/cache the maximum
amount of 16 MBytes of flash that can be mapped below 4 GB.
TEST=On boards with 16 MByte SPI flash chips, the resulting image of a
timeless build doesn't change with this patch. Verified this on Chausie
(Mendocino), Majolica (Cezanne), Cereme (Picasso) and Google/Careena
(Stoneyridge). On Mandolin (Picasso) with an 8 MByte flash, the
resulting image of a timeless build is different, but neither the
coreboot console output nor the Linux dmesg output shows any errors that
might be related to this change.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie12bd48e48e267a84dc494f67e8e0c7a4a01a320
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66700
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook up Lp5CccConfig FSP UPD for Intel MeteorLake.
BUG=b:243734885
TEST=Built and booted on Google Rex. Verified the UPD value in MRC log.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3d7ff8e08546f06cf7807ee825cfef84c14a6c5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67052
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Hook up ECT FSP UPD for Intel MeteorLake.
BUG=b:243734885
TEST=Built and booted on Google Rex. Verified the UPD value in MRC log.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Idc23717c3ce52e3635e2da41733058f912545e5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch resolves the SoC programming dependency order where enabling
extended bios support requires MCHBASE to be enabled.
BUG=b:243693375
TEST=Able to boot from RW-A slot which is mapped to extended BIOS range.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8bd9c3d3fb5e82e34f2d6af8548452c744d4b3c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67046
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Voltage set based on standard configuration for each type.
TEST=build/boot google/skyrim, verify output in cbmem console log,
DMI type 17 table.
Change-Id: I9b1e68a9417e43cbb9c55b4c471664f3f9090342
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66981
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Since the frequency field is deprecated, print the max/configured MT/s
speeds instead.
TEST=build/boot google/skyrim, verify output in cbmem console log
Change-Id: Icee5af762ca37c3b2ec8c9a52a7f32fb848390b0
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66980
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Hook up newly-added method to convert from frequency to MT/s so that
boards which use (LP)DDR5 report their capability properly.
BUG=b:239000826
TEST=build/boot google/skyrim, verify SMBIOS Type 17 table reports
DRAM speeds correctly.
Change-Id: I694b6c227a8d8fb40c897053808bc79df330ed0c
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66954
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This file has nothing useful. Get rid of it.
Change-Id: Id2a42005d3b4b5161079c9ff48867cfc6fb0413d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch brings INTEL_TME config check prior programming
TME Set Activation Core MSR on all cores.
TEST=Able to boot Google/Taeko to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8af7e305da1050f443929ab33be556e713e53e9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66976
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on public Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib".
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded.
PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot.
[DEBUG] HECI: Sending Get IP firmware command
[DEBUG] HECI: Get IP firmware success. Response:
[DEBUG] Payload size = 0x6944
[DEBUG] Hash type used for signing payload = 0x3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This enables SOC_INTEL_COMMON_BLOCK_GPIO_PMODE_4BITS to support 4 bits
GPIO pad mode to configure native function 8 to 15.
BUG=b:239690757
TEST=build and verify pad mode configuration with Meteor Lake mtlrvp
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ibf4b13a3d19095d15bf857c7fe4ec0affb54a4e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66391
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Intel GPIO pad supports 4 bits pad mode, PAD_CFG_DW0[13:10] for pins
that native function 8 to 15 is assigned. This adds native function
definitions from NF8 to NF15 and updates PAD_CFG0_MODE_MASK to support
4 bits pad mode configuration.
Since PAD_CFG_DW0[16:13] is reserved for pins that NF8 or higher is not
assigned, this change would not cause an issue but Kconfig option is
added to minimize an impact and support 4 bits pad mode configuration.
BUG=b:239690757
TEST=build and verify pad mode configuration with Meteor Lake mtlrvp
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Iefd2daa92a86402f2154de2a013ea30f95d98108
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Just use the conditional inclusion through `device/Makefile.inc`.
Change-Id: Id363a97460ae2cfe4b10d491d4ef06394eb530c2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per Alder Lake Processor EDS.
TEST= Able to build and boot Google/Redrix.
Dumping MSR 0x9FF on all logical processors shows zero value being
set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I130480d4fba413d47d0d0137932ec1fb041a88d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66753
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements API to program TME core activation MSR 0x9FF.
Write zero to TME core activate MSR will translate the
TME_ACTIVATE[MK_TME_KEYID_BITS] value into PMH mask register.
Note: TME_ACTIVATE[MK_TME_KEYID_BITS] = MSR 0x982 Bits[32-35]
TEST=Able to build and boot Google/Redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I48cf8e255b294828ac683ab96eb61ad86578e852
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch removes the static kconfig being used to fill in TME enable
FSP UPD. Instead use`is_tme_supported()` and `CONFIG(INTEL_TME)` to check
if the CPU has required TME support rather than hardcoding.
TEST=FSP debug log shows `TmeEnable` UPD is set appropriately for the
TME-supported CPU SKUs.
As per FSP-M debug log:
Without this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x1
With this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8aa2922baaf2a49e6e2762d31eaffa7bdcd43b0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66750
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per the Alder Lake FAS coreboot shall detect the existence of TME
feature by running the CPUID instruction:
CPUID leaf 7/sub-leaf 0
Return Value in ECX [bit 13]=1
If TME is supported then only access to TME MSRs are allowed otherwise
accessing those MSRs would result in GP#.
TEST=Able to detect the existence of TME feature across different
Alder Lake and Meteor Lake CPU SKUs.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd4fcf15a66d27748ac7fbb52b18d7264b901cd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66749
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The `INTEL_TME` Kconfig option has a prompt, which means it is meant to
be user-configurable. However, it has been selected from Alder Lake and
Meteor Lake Kconfig, so `INTEL_TME` cannot be disabled on them. Replace
the `select INTEL_TME` statements with default values in order for this
option to be user-configurable on all platforms that support it.
Change-Id: Ib37c108fcc1004840b82be18fd23c340a68ca748
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66756
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Output should be easier to read as a table.
Change-Id: I32e3e0aab5afd25c0b004d18f64de76445d9a0ed
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
smn_read32 is used in this file, so include the header file with the
function prototype so that the file compiles successfully.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5bef96cd08f22b3475e8b5ba4e984a6e1ab4da36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since the I2C controller is part of the FCH, move the early
initialization from bootblock.c to early_fch.c which also matches what
the newer AMD SoCs do.
TEST=Successfully boots on google/liara and all I2C/cr50/TPM functions
appear to work properly
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22d3a8888eaa34ea612da719c408c0083769e806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66866
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The functionality of sb_enable_lpc is implemented in the common LPC
support code as lpc_enable_controller. This gets called by the common
lpc_early_init which also calls lpc_disable_decodes and lpc_set_spibase.
The lpc_set_spibase call was already done in bootblock_fch_early_init,
so the main change in code behavior is that now lpc_disable_decodes gets
called during early FCH initialization. The lpc_enable_port80 and
sb_lpc_decode calls after the lpc_early_init code will reenable some of
the decodes.
TEST=Successfully boots on google/liara, cbmem and dmesg logs look clean
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia58a6f609fa149a6c09ed99f08bdc4f05eb56f96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66841
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I35dd9a2f0520077913bd3d8f408206dea1b30acb
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66867
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The PCI config space of the SMBus device has a secondary mapping as an
ACPIMMIO bank. Since the PCI device is on bus 0, it's already available
early in boot after the enable_pci_mmconf call, so there's no need to
use the ACPIMMIO mapping instead of the PCI config space mapping.
Verstage on PSP could theoretically access the PCI config space via the
0xcf8/0xcfc register pair, but since verstage on PSP doesn't have the
ACPIMMIO mapping anyway, we won't loose any functionality here.
Change-Id: I5c8ce8de0a6ab0ed41e7e8a5980d0f0510aaa993
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch adds the support to enable/disable skipping MBP HOB
from the devicetree based on mainboard requirement.
Only ADL-N FSP has the required support to skip the MBP HOB and
enabling it is saving the Boot time.
BUG=b:241850107
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iddeb2c652fac9513b14139d6f732d333bbb989d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Debian 11 reports ´0:6:0 can´t derive routing for PCI INT D´.
Use FIXED_INT_PIRQ for INT D to PIRQ routing table.
BUG=NA
TEST=Boot Debian 11 on Siemens AS_TGL1 and verify no PIRQ error message
in ´dmesg´
Change-Id: If38c7b6f664e0f6533e583ce62504281a4092720
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
spm_set_power_control() is already called in spm_init(). It is not
necessary to call spm_set_power_control() again in the mtk_mcu reset
callback.
TEST=check SPM PC value (0x250) after SPM is loaded.
[INFO ] SPM: spm_init done in 54 msecs, spm pc = 0x250
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I7ee517e1eb6485c52155a69d05781a61ddfe4cad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66785
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is sort-of reverts commit cbf290c692b2 ("soc/amd/sabrina: drop
CPPC code"), since it turned out that the CPPC feature is supported
on Sabrina (now Mendocino) despite this being missing from the
documentation I looked at when writing the patch referenced above.
Since the CPPC ACPI code generation functionality has been moved to
common code, this isn't a direct revert.
BUG=b:237336330
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1c059653eeae207d723c77e8a78b19c86e362296
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit eb80b1efa36c99e485b2604e913c2aa316168eea.
Reason for revert: Results into hard hang with serial debug msg inside FSP-S.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8e7cf804828da8939f591eb0770c8daf830c8d94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add the Shadow Registers from 2 through 5 and print information
from them accordingly. All values were taken from Intel document
number 571993.
Tested on the StarLite Mk III and the correct values are
shown:
[DEBUG] CSE: IBB Verification Result: PASS
[DEBUG] CSE: IBB Verification Done : YES
[DEBUG] CSE: Actual IBB Size : 88
[DEBUG] CSE: Verified Boot Valid : FAIL
[DEBUG] CSE: Verified Boot Test : NO
[DEBUG] CSE: FPF status : FUSED
Please note, the values shown are in an error state.
This replaces the Fuse check that is done via Heci, as this will only
work whilst the CSE is in a normal state.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8a9e7b329010fae1a2ed9c3fefc9765e617cdfe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
coreboot is unable to disable certain devices, whilst many are hidden
DPTF and SMBus are not. Set this to enabled chipset so that it is
enabled by default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85d74179b6fe3c6126566422f82f7b806f80d0c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Build error for platforms using Intel FSP for TGL_IOT (FSP_TYPE_IOT). File FirmwareVersionInfoHob.h does not exist in Intel FSP TGL IOT package.
File FirmwareVersionInfoHob.h is included when DISPLAY_FSP_VERSION_INFO is enabled. Enable this config for non TGL_IOT only.
BUG = NA
TEST = Verify that DISPLAY_FSP_VERSION_INFO is disabled by default for TGL_IOT
configuration (Build Siemens AS_TGL1).
Change-Id: Ief5a7222daf6f1658e8dc04f97b4ddc2bcb74905
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66636
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mendocino has more eSPI decode ranges than Picasso or Cezanne. To
support these additional ranges, introduce a new Kconfig option
SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES that can be selected by
the SoCs that support the additional eSPI IO/MMIO decode ranges.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib761cdf201c35805d68cf5e8e462607ffd9fa017
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The patch updates the comments on return values and heci_reset()
triggering during error scenarios of heci_receive() and heci_send()
functions to reflect the current implementation.
Test=Build the code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I6c6c3312602c772147cb315db9ea1753d84a0fb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Starting vboot earlier in bootblock instead of romstage is usually
preferred (smaller root of trust, among other things). Therefore
unselect VBOOT_STARTS_IN_ROMSTAGE for broadwell. Also remove the unused
BROADWELL_VBOOT_IN_BOOTBLOCK option.
Change-Id: If8feea403ee4cd3a16ed8cb0faf9f4ccb34feaaf
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit f87489bbae5bb1ae3b17b6a03af9e309769b1f72.
Reason for revert: Broadwell actually supports early flash writes.
Change-Id: I342aefe464c72a32b41a40062b62d871caa0707b
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Now that we have functionality to get the minimal and nominal
frequencies, the corresponding fields in the CPPC config can now be
populated. If the HOB isn't present and/or the frequency values
could not be obtained, CPPC_UNSUPPORTED is still used; otherwise the
HOB-provided frequency in MHz is used for those two fields.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Change-Id: Id3257690a3388d44ceceb7ac4f1db3d49e195caa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66551
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add common AMD FSP functionality to get the nominal and minimal CPU core
CPPC frequencies. Those functions will be used in the _CPC ACPI object
generation in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Change-Id: I68ebdf610795d2673e0118a732f54f5f719b73c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66550
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
xhci.asl places the SS ports at 11-14, following HS ports 1-10. However,
for Nissa, the kernel detects 12 HS ports 1-12 and 4 SS ports at 13-16,
resulting in the PLD intended for SS ports 1 and 2 being associated with
HS ports 11 and 12.
Changing the asl for SS to 13-16 makes locations associate correctly and
peering work.
BUG=b:234544025
BRANCH=firmware-brya-14505.B
TEST=manually verified on Nissa and Brya devices
Change-Id: I57aef771a7ff086b71a9e90b81e1a3635f832b2f
Signed-off-by: Adam Mills <adamjmills@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66590
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SMI sleep entry handler will access the SMN space via the index/data
register at PCI config space offsets 0xb8 and 0xbc of the device at bus
0, device 0, function 0. This register pair is also used by other
software components running on the x86 cores after boot, so it should be
saved and restored at the beginning/end of the SMI handler if it
accesses SMN. The sleep entry SMI handler is a special case, since the
OS is already done at the moment we enter the sleep SMI handler which is
the last code that gets run on the x86 cores before entering S3/4/5.
BUG=b:237004699
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0980562ef8a61489082a81c71d6d00d0786d68cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
