summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2021-01-15cpu/x86/mpinit: Serialize microcode updates for HT threadsPatrick Rudolph
This change affects Intel CPUs only. As most platforms are doing uCode update using FIT, they aren't affected by this code either. Update microcode in MP-init using a single spinlock when running on a Hyper-Threading enabled CPU on pre FIT platforms. This will slow down the MP-init boot flow. Intel SDM and various BWGs specify to use a semaphore to update microcode on one thread per core on Hyper-Threading enabled CPUs. Due to this complex code would be necessary to determine the core #ID, initializing and picking the right semaphore out of CONFIG_MAX_CPUS / 2. Instead use the existing global spinlock already present in MPinit code. Assuming that only pre-FIT platforms with Hyper-Threading enabled and at most 8 threads will ever run into this condition, the boot delay is negligible. This change is a counterproposal to the previous published patch series being much more unsophisticated. Change-Id: I27bf5177859c12e92d6ce7a2966c965d7262b472 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-15soc/amd/cezanne,picasso/uart: remove unneeded struct nameFelix Held
This struct isn't used anywhere else, so there's no need to name it. Change-Id: I22eda07f14096d2b7400e6ab715641ffd68fbc08 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49444 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/intel/tgl: Add configurable value for UsbTcPortEnBrandon Breitenstein
As a requirement of TCSS this setting needs to be correctly set to determine what Type-C ports are enabled on the platform. Without this value correctly set there can be adverse effects on the other TCSS specific values. BUG=b:159151238 BRANCH=firmware-volteer-13672.B TEST=Built image for Voxel and verified that S0ix cycles no longer fail when the IomPortPad is set to 0 Change-Id: I6c5260cda71041439fe89d15bd3cafd4052ef1e7 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2021-01-14soc/amd/picasso: Remove printf in aslRaul E Rangel
These are no longer really useful. We can also enable Power Resource ACPI debug in the kernel if we want these messages. BUG=none BRANCH=zork TEST=emerge-zork and verify debug messages are no longer posted Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I936e816266825f1c59377c2e079ffe1a5188838c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-14build system: Structure and serialize INTERMEDIATEPatrick Georgi
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying the file in some way. When running them in parallel, coreboot.pre can be read from and written to in parallel which can corrupt the result. Add a function to create those rules that also adds existing INTERMEDIATE targets to enforce an order (as established by evaluation order of Makefile.inc files). While at it, also add the addition to the PHONY target so we don't forget it. BUG=chromium:1154313, b:174585424 TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2 timeout and sercon) and saw that they were executed. Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/picasso/uart: add missing device/device.h includeFelix Held
Change-Id: Ie3188d36e8ecacab42818c8619122751fcb7cdf8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49379 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/cezanne: add remaining non-ACPI parts of UART supportFelix Held
The ACPI part still needs some more code to be in place, so add that later. TEST=Together with the currently not merged rest of the amdfw patch train applied this results in working serial console in bootblock in Majolica. Change-Id: Ia844e86a80c19026ac5b47a5a1e91c2553ea5cca Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49378 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/cezanne: add AOAC supportFelix Held
Change-Id: I9d7574b60640eaf9a47a797e823324edeaf1e770 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-14soc/amd/cezanne: add console UART supportFelix Held
Change-Id: I1a01cc745c7049dc672bca12df5c6b764ac9b907 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-14soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_UARTFelix Held
Since the functions that get called by the coreboot console initialization code aren't in the SOC-specific code anymore, the SOC's uart.c can be included unconditionally in the build now. This also replaces the STONEYRIDGE_UART Kconfig option with the common AMD_SOC_CONSOLE_UART one. Change-Id: I09c15566a402895d6388715e8e5a802dc3c94fdd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/common/block/uart/Makefile: use all targetFelix Held
Change-Id: I5079decfae982d2222bb9a7f5155d51885d4d3a9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49374 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/piasso/uart: move get_uart_base prototype to common code headerFelix Held
This will result in less code duplication when the common AMD SoC UART support gets used for more AMD SoCs. Change-Id: Id1786f32324de3e3947d792c599e2019705c5a85 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49373 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/common/uart: move CONSOLE_UART_BASE_ADDRESS back to SoC codeFelix Held
This partially reverts commit 6f8f9c969be9d471464f1b6a42b4bb1c2590db5c by moving CONSOLE_UART_BASE_ADDRESS back to the SoC-specific code, since the number and base addresses of UARTs turned out to be rather SoC- specific. The help text for the AMD_SOC_CONSOLE_UART option also contained those base addresses, so remove that as well. Change-Id: I01211ec62421c56f22ed611313d6245a05bdea67 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49372 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/picasso: remove broken and unused legacy UART supportFelix Held
The UARTs in the Picasso SoC are memory mapped, but there is also some hardware support that isn't used by any board to make the UARTs behave like the ones found on legacy x86 machines from the 90s. In the MMIO mode the MMIO address of the UART controller is passed to the OS via ACPI. The OS expects the base clock of the UART controller to be 48MHz (see the cz_uart_desc struct in drivers/acpi/acpi_apd.c and drivers/tty/serial/8250/8250_dw.c in the Linux kernel) in this case. It is also possible to enable additional decodes from four 8 byte legacy I/O locations used for serial ports to the different UART controllers, which doesn't disable the MMIO access though. The legacy I/O-mapped serial ports are usually expected to have a base clock of 16*115200Hz which the hardware can also provide to the UART's baud rate generator. So there are two possible valid configurations to use the UARTs; either MMIO access in combination with a 48MHz base clock or the legacy I/O decode with a ~1.8MHz base clock. The existing code unconditionally generates ACPI objects for all enabled UARTs, so those shouldn't be put into legacy mode and switching the base clock to ~1.8MHz was only done in the case that the UART was used as coreboot console UART which still used the MMIO access, but the lower base clock. Since no board even selects this option and it's rather invasive to properly implement this feature, just drop the corresponding broken code. TEST=SoC UART console still works on Mandolin. Change-Id: I26fa8fdfc781b583ba56ac4dbcbbfb6100e84852 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49371 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13soc/amd/picasso: Disable CBFS MCACHERaul E Rangel
This is causing boot errors on zork: coreboot-v1.9308_26_0.0.22-18590-g4598a7bed945 Wed Dec 16 17:32:25 UTC 2020 bootblock starting (log level: 8)... Family_Model: 00820f01 PSP boot mode: Development Silicon level: Pre-Production PMxC0 STATUS: 0x800 BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) FMAP: area FW_MAIN_B found @ 312000 (3137280 bytes) ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106 BUG=b:177323348 TEST=Boot ezkinil to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f2bbdd9c87c4efdfb0042e90a20b489fa0efced Reviewed-on: https://review.coreboot.org/c/coreboot/+/49128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-13ACPI: Have single call-site for acpi_inject_nvsa()Kyösti Mälkki
Change-Id: I61a9b07ec3fdaeef0622df82e106405f01e89a9e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48719 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13ACPI: Add common acpi_fill_gnvs()Kyösti Mälkki
Change-Id: I515e830808a95eee3ce72b16fd26da6ec79dac85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48718 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13soc/amd: Rename to soc_fill_gnvs()Kyösti Mälkki
Replace acpi_create_gnvs() under soc/ to reflect their changed functionality. Change-Id: I61010f64a4a935f238e6dcd0f8c1340a6cc68eb4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-13soc/amd: Rename to pm_fill_gnvs()Kyösti Mälkki
Change-Id: I80f92bed737904e6ffc858b45459405fe76f1d04 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-13soc/intel/tigerlake: Disable TC cold supportSrinidhi N Kaushik
This change lets IOM consider all USB connected devices as device attached(DA) scenario. While connecting a typec-to-a dongle, IOM would disable TC cold and help to resolve enemuration failure after usb3 device is plugged into the dongle. BUG=b:173054070 TEST=Build and boot on delbin. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I0ad0322693b4f8fbf1000b24eb21dddcebec686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/49244 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12soc/intel: rename uart_max_indexMichael Niewöhner
The name `..._index` is confusing since the maximum index of an array is not `ARRAY_SIZE(array)` but `ARRAY_SIZE(array) - 1`. Rename `uart_max_index` to `uart_ctrlr_config_size` to make the name match the variable´s value. Change-Id: I7409c9dc040c3c6ad718abc96f268c187d50d79c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-12soc/intel/denverton_ns: Drop redundant `DEFAULT_ACPI_BASE`Angel Pons
It is only used in one place, and there's two other equivalent macros. Change-Id: I7c8241e28f688abd2df8180559dd02ee441c7023 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-12soc/intel/common/pcie: Add helper function for getting mask of enabled portsFurquan Shaikh
This change adds a helper function `pcie_rp_enable_mask()` that returns a 32-bit mask indicating the status (enabled/disabled) of PCIe root ports (in the groups table) as configured by the mainboard in the device tree. With this helper function, SoC chip config does not need to add another `PcieRpEnable[]` config to identify what root ports are enabled. Change-Id: I7ce5fca1c662064fd21f0961dac13cda1fa2ca44 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48968 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12soc/intel/alderlake: Add PCH ID 0x5182Subrata Banik
TEST=Able to build and boot ADLRVP. Change-Id: Ia331998b46abcf10e939078dea992589f09139bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49301 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/{icl,tgl,jsl,ehl}: add LPIT supportMichael Niewöhner
Add SLP_S0 residency register and enable LPIT support. Change-Id: Id1abbe8dcb7796eeb26ccb72f1f26cf7a040dba4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49048 Reviewed-by: Lance Zhao Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/skl: add SLP_S0 residency register and enable LPIT supportMichael Niewöhner
Test: Linux adds the cpuidle sysfs interface; Windows with s0ix_enable=1 boots without crashing with an INTERNAL_POWER_ERROR. Change-Id: Icccd9d15a9e9a22c9bfe7a9843e95d77013c9c8f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49047 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cnl: add SLP_S0 residency register and enable LPIT supportMichael Niewöhner
Test: Linux adds the cpuidle sysfs interface; Windows with s0ix_enable=1 boots without crashing with an INTERNAL_POWER_ERROR. - Windows and Linux tested on google/akemi - Linux tested on clevo/cml-u Change-Id: I51fdf52419aa7f059b70a906fd8bdac88d5b6046 Tested-By: Matt DeVillier <matt.devillier@gmail.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49046 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11acpi,soc/intel/common: add support for Intel Low Power Idle TableMichael Niewöhner
Add support for the Intel LPIT table to support reading Low Power Idle Residency counters by the OS. On platforms supporting S0ix sleep states there can be two types of residencies: * CPU package PC10 residency counter (read from MSR via FFH interface) * PCH SLP_S0 assertion residency counter (read via memory mapped interface) With presence of one or both of these counters in the LPIT table, Linux dynamically adds the corresponding attributes to the cpuidle sysfs interface, that can be used to read the residency timers: * /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us * /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us The code in src/acpi implements generic LPIT support. Each SoC or platform has to implement `acpi_fill_lpit` to fill the table with platform-specific LPI state entries. This is done in this change for soc/intel/common, while being added as its own compilation unit, so SoCs not yet using common acpi code (like Skylake) can use it, too. Reference: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Test: Linux adds the cpuidle sysfs interface; Windows with s0ix_enable=1 boots without crashing with an INTERNAL_POWER_ERROR. - Windows and Linux tested on google/akemi together with CB:49046 - Linux tested on clevo/cml-u, supermicro/x11ssmf together with CB:49046 Change-Id: I816888e8788e2f04c89f20d6ea1654d2f35cf18e Tested-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11{soc,vc,mb}/intel: Drop support for Cannon Lake SoCFelix Singer
Drop the support for the Intel Cannon Lake SoC for various reasons: * Most people can't use coreboot on Cannon Lake, since the required FSP binaries aren't publicly available. Given that FSP binaries for several newer platforms have been released, it's very unlikely that Cannon Lake FSP will ever be released. * It seems there is no interest in this, since the reference mainboard is the only available mainboard in tree. Also, remove the related reference mainboard intel/cannonlake_rvp and its FSP headers in intel/fsp2_0/cannonlake. Change-Id: I8f698e16099acb45444b2bc675642d161ff8c237 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48775 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/amd/cezzane: Add a minimal chipset treeFurquan Shaikh
This change adds a minimal chipset tree with only two devices: 1. Domain 2. GNB root complex This allows sconfig to generate the config structure for SoC root device that is used by config_of_soc(). Change-Id: I7e08ecf4b9556dc9325bd5a6a51566a949ceb73f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-01-11soc/intel/common/uart: Use simple(_s_) variants of PCI functionsFurquan Shaikh
This change updates various uart_* functions to use simple(_s_) variants of PCI functions. This is done for a few reasons: * __SIMPLE_DEVICE__ check can be dropped since the same data type can be used in early stages and ramstage. * Removes the requirement on early stage to walk the device tree to get access to the device structure. This allows linker-based device tree optimizations for early stages. As part of this change, uart_get_device() is refactored and a new function uart_console_get_devfn() is added which returns pci_devfn_t in MMCONF format. It is then used directly by the _s_ variants of PCI functions. Change-Id: I344037828118572ae5eb27c82c496d5e7a508a53 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-11soc/intel/uart: Drop SoC callback `soc_uart_console_to_device`Furquan Shaikh
This change renames `struct uart_gpio_pad_config` to `struct uart_controller_config` and adds a new parameter devfn (which expects devfn for the UART controller corresponding to the index in PCI_DEVFN() format). This gets rid of the SoC callback to get `struct device` pointer to the UART controller device. Change-Id: Id0712a0038f2cc1a61b8b5a58fa155f14e7949a5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49212 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cnl: Allow setting PCIe subsystem IDs after FSP-SJeremy Soller
Prevent the FSP from writing its default SVID SDID values of 8086:7270 for internal devices as this locks most of the registers. Allows the subsystemid values set in devicetree to be used. A description of this SSID table override behavior, along with example code, is provided in the TigerLake FSP Integration Guide, section 15.178 ("SI_CONFIG Struct Reference"). The xHCI and HDA devices have RW/L registers rather than RW/O registers. They can be written to multiple times but cannot be modified after being locked, which happens during FspSiliconInit. Because coreboot populates subsystem IDs after SiliconInit, these devices specifically must be written beforehand or will otherwise be locked with their default values of 0:0. Tested by checking lspci output on System76 galp3-c (WHL), oryp5 (CFL), and oryp6 (CML). References: - TigerLake FSP Integration Guide - Intel Document Number 337868-002 Change-Id: Ieaa45ef7fa8e0da4a25b9174ded1ea0c5d9c4b4e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49104 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/amd/picasso: Separate GPIO define into gpio_defs.hEric Lai
Separate GPIO define into gpio_defs.h, then we can use it in asl include. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If2a779eae228f621e77610889205853de2fb179a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-11soc/intel/cannonlake: Enable wake from USB in S4Patrick Rudolph
The xHCI controller supports waking the system from S1-S4. Thus specify that the deepest sleep state is S4 in _PRW. Tested on Prodrive/hermes. The board now wakes from S4 as well by pressing a key on the USB keyboard. Change-Id: I0bb266e70ee6b4eb8922671b7d0078db0d29a1da Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49224 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/alderlake: Refactor SoC code to maintain CPU and PCH PCIE RPsSubrata Banik
List of changes: 1. Create new Kconfig MAX_CPU_ROOT_PORTS and MAX_PCH_ROOT_PORTS as per EDS. 2. Add new chip variable to enable/disable CPU PCIE RPs from mainboards. 3. Rename PcieRpEnable to PchPcieRpEnable. 4. Enable CPU RPs as below in mainboard devicetree.cb RP1: PEG60 : 0:6:0 : CPU SSD1 RP2: PEG10 : 0:1:0 : x8 CPU Slot RP3: PEG62 : 0:6:2 : CPU SSD2 Change-Id: I92123450bd7cfb2e70aae8de03053672a7772451 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49136 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/broadwell: Use `mp_cpu_bus_init`Angel Pons
This is needed to allow switching to Haswell CPU code in the future. Change-Id: Ic642f32f9c4a269a66ac470b7a7217f20ff8bfba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46886 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/google/cyan: Move board_id() to mainboard_fill_gnvs()Kyösti Mälkki
Only a google/cyan variant evalutes BDID in ASL. Change-Id: I3d839333333b4762ae5350734c85471a3c12838a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Add missing include in nvs.hKyösti Mälkki
Change-Id: Ic779a668ebaa4f0c9bdef95fd6de8f0179e8a534 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49004 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Rename to soc_fill_gnvs()Kyösti Mälkki
Replace acpi_create_gnvs() under soc/ to reflect their changed funcionality. Change-Id: I7bdbe0d6f795252e713e9785ada2b6320e6604b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48717 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Replace acpi_init_gnvs()Kyösti Mälkki
Rename these to soc_fill_gnvs() and move the callsite away from mb/. Change-Id: I760c36f65c6122103f2be98fc11ee13832c2772e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48716 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel: Factor out soc_fill_gnvs()Kyösti Mälkki
Name the common part of GNVS initialisation as soc_fill_gnvs(). It is also moved before the call to acpi_create_gnvs(), which followup will rename to mainbord_fill_gnvs() to reflect that implementation is under mb/. Change-Id: Ic4cf1548b65a86212d6e45d460fcd23bb8036365 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48706 Reviewed-by: Lance Zhao Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Replace uses of CBMEM_ID_ACPI_GNVSKyösti Mälkki
Change-Id: I45a2d9cb7f07609a1ff03fd70f17c3f2d4f013b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48705 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/braswell: Refactor acpi_init_gnvs()Kyösti Mälkki
Move GNVS details to different function, called from acpi_create_gnvs(). Change-Id: Ief02c078fe37753c0d29418394a351105a1aacc8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48704 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant ChromeOS setup for GNVSKyösti Mälkki
Already done in common gnvs_get_or_create() implementation once gnvs_chromeos_ptr() is defined for platforms. Change-Id: I90fa2bc28ae76da734b3f88be057435aed9fe374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant CONSOLE_CBMEM setup in GNVSKyösti Mälkki
Already done from common gnvs_get_or_create() implementation after gnvs_cbmc_ptr() is defined. Change-Id: I77c292cd9590d7fc54d8b21ea62717a2d77e5ba4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48702 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant CBMEM_ID_ACPI_GNVS allocationsKyösti Mälkki
Allocation now happens prior to device enumeration. The step cbmem_add() is a no-op here, if reached for some boards. The memset() here is also redundant and becomes harmful with followup works, as it would wipe out the CBMEM console and ChromeOS related fields without them being set again. Change-Id: I9b2625af15cae90b9c1eb601e606d0430336609f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48701 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/amd/picasso: add missing GNB I/O APIC initializationFelix Held
Change-Id: Iddb0c20e769e6921ba5d0dd4a84ab9e494d522e1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48269 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel/common/uart: Restrict scope of uart_common_init to uart.cFurquan Shaikh
uart_common_init is not used outside of soc/intel/common/block/uart.c. This change restricts the scope to this file and drops the declaration from uart.h Change-Id: I499a53506f9b2e91ecc7334bf9b023d342e802fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49211 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel/common: Pass in pci_devfn_t into lpss_set_power_stateFurquan Shaikh
This change updates the parameter passed into `lpss_set_power_state()` from struct device * to pci_devfn_t. This allows the users in the early stages to use pci_devfn_t instead of having to walk the device tree to get a pointer to the relevant device structure. It is important for optimizing out unnecessary components of the device tree from the early stages. Change-Id: Ic9e32794da65348fe2a0a2791db47ab83b64cb0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49210 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel: Drop `dev` parameter from soc_get_gen_io_dec_range()Furquan Shaikh
This change drops the parameter `struct device *dev` from the function `soc_get_gen_io_dec_range()`. This function uses the parameter dev to get a pointer to config structure for extracting the decode ranges configured by mainboard in device tree. However, there is no separate chip driver for the LPC device which means that the SoC code can use `config_of_soc()` to get to SoC chip config instead of using the LPC device. This change is being done in preparation to clean up the device tree/chip config access in early stages that allows for optimizing the inclusion of device tree elements in the early stages. Change-Id: I3ea53ddc771f592dd0ea5e5e809be2d2eff7f16d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08soc/intel/tigerlake: Enable USB2 port reset message on Type-C portsJohn Zhao
USB3 is in CPU and USB2 in PCH on Tigerlake. Cross die messaging is implemented between CPU and PCH through the IOSF SB bridge. a PCH xHCI USB2 port reset event issued by the xHCI driver shall trigger a message upstream to CPU to wake it from the low power state which allows a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Built and booted to kernel on Voxel board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I672f30a117980bc10bd71e9b77c5fa76286b9f5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49052 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/amd/picasso: Generate GNB IO-APIC PCI routing tableRaul E Rangel
This adds support for generating a PCI routing table that routes to the GNB IO-APIC. This means we no longer need to route to the FCH IO-APIC for PCI interrupts. BUG=b:170595019 TEST=Boot ezkinil to OS with `pci=nomsi amd_iommu=off` and verify all peripherals are working CPU0 CPU1 0: 112 0 IO-APIC 2-edge timer 1: 0 99 IO-APIC 1-edge i8042 4: 0 2523 IO-APIC 4-edge ttyS0 5: 34632 0 IO-APIC 5-fasteoi mmc1 7: 5646 0 IO-APIC 7-fasteoi pinctrl_amd 8: 0 0 IO-APIC 8-edge rtc0 9: 0 33 IO-APIC 9-fasteoi acpi 10: 88258 0 IO-APIC 10-edge AMD0010:00 11: 0 32485 IO-APIC 11-edge AMD0010:01 24: 3301 0 amd_gpio 3 cr50_i2c 25: 0 235214 IO-APIC 28-fasteoi amdgpu 26: 67408 0 IO-APIC 31-fasteoi xhci-hcd:usb1 27: 0 488876 IO-APIC 8-fasteoi mmc0 28: 1265 0 amd_gpio 9 PNP0C50:00 29: 656 0 amd_gpio 12 ELAN9004:00 30: 413 0 amd_gpio 31 chromeos-ec 31: 14153 0 IO-APIC 4-fasteoi ath10k_pci 32: 2 0 sysfstrig0 cros-ec-accel_consumer3 33: 2 0 sysfstrig0 cros-ec-accel_consumer0 34: 6 0 amd_gpio 62 rt5682 35: 0 38937 IO-APIC 29-fasteoi snd_hda_intel:card0, ACP3x_I2S_IRQ Cq-Depend: chrome-internal:3452710 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3211ab351a332fafb7b5f9ef486bb6646d9a214c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08*/Makefile.inc: Add some INTERMEDIATE targets to .PHONYArthur Heymans
Change-Id: I125e40204f3a9602ee5810d341ef40f9f50d045b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48897 Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08cbfstool: Use flock() when accessing CBFS filesJulius Werner
Trying to do multiple operations on the same CBFS image at the same time likely leads to data corruption. For this reason, add BSD advisory file locking (flock()) to cbfstool (and ifittool which is using the same file I/O library), so that only one process will operate on the same file at the same time and the others will wait in line. This should help resolve parallel build issues with the INTERMEDIATE target on certain platforms. Unfortunately, some platforms use the INTERMEDIATE target to do a direct dd into the CBFS image. This should generally be discouraged and future platforms should aim to clearly deliminate regions that need to be written directly by platform scripts with custom FMAP sections, so that they can be written with `cbfstool write`. For the time being, update the legacy platforms that do this with explicit calls to the `flock` utility. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I022468f6957415ae68a7a7e70428ae6f82d23b06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-08soc/intel/jasperlake: Update acoustic noise related parametersMaulik V Vaghela
We need to fill Acoustic noise mitigation related UPDs only in case when acoustic noise mitigation is enabled. This will also clarify the user that they need to enable Acoustic noise mitigation while using this config in mainboard. We're only filling UPD for domain VR index 0 since there is only one VR domain for JSL (VCCIN VR). Reference: JSL EDS (Document# 613601) (Chapter 3.4) BUG=None BRANCH=dedede TEST=UPD values are getting filled correctly when Acoustic noise mitigation is enabled. Change-Id: I0cf4ccfced13b0d32b3d20713eace63e66945332 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-08soc/intel/jasperlake: Enable USB2 PHY SUS PG for s0ix qualificationKrishna Prasad Bhat
USBSUSPGQDIS is a disqualifier bit which will allow platform to enter s0ix even if USB2 PHY SUS is not power gated. Disabling this bit will ensure that USB2 PHY SUS is power gated before entering s0ix. BUG=b:175767084 BRANCH=dedede TEST=s0ix works on drawcia and USB wake from s0ix works fine. Change-Id: I20bad3f79141799c88a16272ea822b9e3dede504 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-07ACPI: Remove ACPI_NO_SMI_GNVSKyösti Mälkki
This was used as a guard to not raise SMI with APM_CNT_GNVS_UPDATE. The handler has been removed now completely. Change-Id: I7726367fd16630aa4b4b25b24b05f740645066db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-07soc/amd/picasso: Add GRXS and GTXS methodEric Lai
Add GRXS and GTXS into gpiolib. We can align with Intel ACPI method for the better usage. This benefits acpi.c to be more clear, too. BUG=b:176270381 BRANCH=zork TEST=Confirm the Goodix touchscreen functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I1aa6a8f44f20577e679336889c849dd67cb99f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/48944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-07soc/amd/picasso: Add STXS and CTXS methodEric Lai
Add STXS and CTXS into gpiolib. We can align with Intel ACPI method for the better usage. This benefits acpi.c to be more clear, too. BUG=b:176270381 BRANCH=zork TEST=Confirm the Goodix touchscreen functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If4fcd68496a712fdccf44b91a6192ef58a0a9733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48943 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07arch/x86: Move prologue to .init sectionKyösti Mälkki
For arch/x86 the realmode part has to be located within the same 64 KiB as the reset vector. Some older intel platforms also require 4 KiB alignment for _start16bit. To enforce the above, and to separate required parts of .text without matching *(.text.*) rules in linker scripts, tag the pre-C environment assembly code with section .init directive. Description of .init section for ELF: This section holds executable instructions that contribute to the process initialization code. When a program starts to run, the system arranges to execute the code in this section before calling the main program entry point (called main for C programs). Change-Id: If32518b1c19d08935727330314904b52a246af3c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47599 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07soc/intel/icelake: Remove unused ENABLE_DISPLAY_OVER_EXT_PCIE_GFXSubrata Banik
Mainboard user can select VGA_ROM_RUN_DEFAULT Kconfig hence no need to have another ENABLE_DISPLAY_OVER_EXT_PCIE_GFX Kconfig to load/execute VGA OpRom. Change-Id: Id87f82d9c3657afad9db94b1ec0917121edfe2bb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07soc/intel/common/cse: Drop dependency on CHROMEOS for SOC_INTEL_CSE_LITE_SKUMatt DeVillier
The CSE lite SKU has 2 CSE firmware boot partitions vs 3 for the "normal" SKU; this has nothing to do with building for ChromeOS or not, and by having this dependency, boards with select the CSE lite SKU are unable to build with CONFIG_CHROMEOS unset due to Kconfig dependency issues. Test: build google/wyvern with CONFIG_CHROMEOS not set. Change-Id: I6959f35e1285b2fab7ea1f83a5ccfcb065c12397 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07soc/mediatek: rtc: Use `bool` as return typeYidi Lin
BUG=b:176307061 TEST=emerge-asurada coreboot; emerge-kukui coreboot emerge-oak coreboot boot to shell on Asurada Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id31fa04edc2920c1767d9f08ab7af0ab4a15bc24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-06soc/intel/broadwell: Move MAX_CPUS from mb to SoCFelix Singer
All Broadwell boards use 8 for MAX_CPUS, so this option can be factored out into SoC Kconfig. Change-Id: I311b95ea75a7c6b76b32c7197a0cec86db644234 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/skylake: Move MAX_CPUS from mb to SoCFelix Singer
Configure MAX_CPUS in SoC Kconfig with 8 as default value and remove it from every mainboard where 8 is used. Change-Id: I825625bf842e8cd22dada9a508a7176e5cc2ea57 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/amd/picasso: Correctly populate the PCI interrupt line registerRaul E Rangel
The PCI interrupt line registers are used as a last resort if routing can't be fetched from either ACPI or the MPTable. This change correctly sets the registers. It overrides the pirq_data set by the mainboards since the routing is fixed in AGESA. BUG=b:170595019 TEST=Boot ezkinil with `pci=nomsi,noacpi amd_iommu=off noapic` Verified all PCI peripherals are still functional. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If5d4d8f613c8d0fa9b43cefa804824681c3410d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-06soc/amd/picasso: Fix ACPI PCI routing tableRaul E Rangel
The original routing table did not handle all 8 INTx interrupts. Additionally it also didn't take the swizzling into account. Now that we know how AGESA programs the routing table we can correctly generate it. We still route the PCI interrupts through the FCH IOAPIC. A follow up will have the GNB IOAPIC handle the PCI interrupts. There is still work to be done to fix the legacy PCI_IRQ register for each PCI device. We can then remove the mainboard_pirq_data from each mainboard. BUG=b:170595019 TEST=Used ezkinil Boot kernel with `pci=nomsi amd_iommu=off noapic` and `pci=nomsi amd_iommu=off` then verified system was usable and verified /proc/interrupts looked correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2b2cce9913081d5cd456043ba619a79c1dfd4a8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-06soc/amd/picasso/root_complex: add missing set_resourcesFelix Held
The set_resources field in the root_complex_operations struct shouldn't be NULL, but a pointer to noop_set_resources instead. This fixes the error "PCI: 00:00.0 missing set_resources". Change-Id: I2d9f3850b3051c92cd9c0f52f8570f4fd6133070 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-06soc/amd/common/block/gpio_banks: fix sequence in gpio_outputFelix Held
When configuring a GPIO pin as output the value should be written before it gets configures as an output to avoid a possible glitch on the output when the GPIO pin was an input before and the output value was different from the one that got written afterwards. Change-Id: I2bb5e629ef0ed2daadc903ecc1852200fe3a5cb9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-06soc/amd/common/block/gpio_banks: clear output enable in gpio_input_*Felix Held
The functions to configure a GPIO as input with pull-up/down need to clear the output enable bit, so that the direction will be input. If the pin was configured as output before, the pin direction was still output after this call which is at least unexpected. Change-Id: Id1fa1669195080b34fd62324616825415728b0b4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-06soc/amd/common/block/gpio_banks: clear pull-up/down bits in gpio_inputFelix Held
If the pin was configured as pull-up/down before this wouldn't get cleared when calling gpio_input before. Change-Id: I17d5eccb7492138e64abaecbd7cb853adb8c4d2d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-06soc/intel/alderlake: Update CPU microcode patch base address/sizeSubrata Banik
This patch updates CPU microcode patch base address/size to FSP-S UPD to have second microcode patch loaded successfully to enable Mcheck flow. This is new feature requirement for ADL as per new Mcheck initialization flow. BUG=b:176551651 TEST=Able to reach beyond PC6 without any MCE. Change-Id: I936816e3173dbcdf82b2b16b465f6b4ed5d90335 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48847 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04arch/x86: Pass GNVS as parameter to SMM moduleKyösti Mälkki
Change-Id: I9d7417462830443f9c96273d2cc326cbcc3b17dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04soc/intel/baytrail/southcluster.asl: Use consistent comment formattingMatt DeVillier
Change-Id: I479e1eb5819c42621e8b17367b964124d5433378 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-04soc/intel/baytrail: add LPEA resources to southcluster.aslMatt DeVillier
The LPEA device memory resources, required by Windows drivers, were not being set. Allocate required resources using soc/intel/braswell/acpi/southcluster.asl as a reference. This patch alone is not sufficient for working audio under Windows on Baytrail ChromeOS devices, but it is a necessary component. Test: boot Windows 10 on google/swanky, observe LPEA device working properly. Change-Id: I7994d9b2c6e134c01b05cd7c61d309b6ba6e88e5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48745 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04soc/intel/apollolake: Hook up GMA ACPI brightness controlsMatt DeVillier
Add struct i915_gpu_controller_info for boards to supply info needed to generate ACPI backlight control SSDT. Hook into soc/common framework by implementing intel_igd_get_controller_info(). Add Kconfig entries to set the correct register offsets for backlight frequency and duty cycle. Change-Id: Ia62a88b58e7efd90f550000fc5b2cef0cb5fade7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03soc/intel: Drop indirect <soc/nvs.h> includeKyösti Mälkki
Change-Id: Ia19018685749efdd543cb09c06df117690ab9d66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48803 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03soc/intel: Replace <soc/nvs.h> with <soc/device_nvs.h>Kyösti Mälkki
Change-Id: Ib78e746875e330e47540a6199343be62aa7e92a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48830 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03sb,soc/intel: Convert some CONFIG(CHROMEOS) preprocessorKyösti Mälkki
Change-Id: I964f4340caa20124a15e52c055d2f27ba5113687 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-02soc/amd/picasso: Separate CPUID defs into new headerJason Glenesk
Move CPUID definitions out of msr.h into new cpuid.h header. BUG=b:155307433 BRANCH=Zork Change-Id: I2ed5e0a5a6dbdb38fce8bf3e769f680330718653 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-01soc/intel/cnl: add panel and backlight configuration codeMichael Niewöhner
Add code for panel and backlight configuration. Tested successfully with libgfxinit on Clevo L141CU. Change-Id: If619b28478b4b0d18f28f318c16336e0de76e129 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
There are multiple different devicetree setting formats for graphics panel settings present in coreboot. Replace the ones for the platforms that already have (mostly) unified gma/graphics setup code by a unified struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt the devicetrees accordingly. Always ensure that values don't overflow by applying appropriate masks. The remaining platforms implementing panel settings (GM45, i945, ILK and SNB) can be migrated later after unifying their gma/graphics setup code. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-01soc/intel/bdw,nb/intel/hsw: convert panel delays to ms representationMichael Niewöhner
For easier review of the switch to a new register struct in the follow-up change, the panel delay times get converted from destination register raw format to milliseconds representation in this change. Formula for conversion of power cycle delay: gpu_panel_power_cycle_delay_ms = (gpu_panel_power_cycle_delay - 1) * 100 Formula for all others: gpu_panel_power_X_delay_ms = gpu_panel_power_X_delay / 10 The register names gain a suffix `_ms` and calculation of the destination register raw values gets done in gma code now. Change-Id: Idf8e076dac2b3048a63a0109263a6e7899f07230 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-01soc/mediatek: dsi: Fix EoTp flagShaoming Chen
SoC will transmit the EoTp (End of Transmission packet) when MIPI_DSI_MODE_EOT_PACKET flag is set. Enabling EoTp will make the line time larger, so the hfp and hbp should be reduced to keep line time. BUG=b:168728787 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Shaoming Chen <shaoming.chen@mediatek.corp-partner.google.com> Change-Id: Ifadd0def13cc264e9d39ab9c981fbdc996396bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/48868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/intel/skylake: Remove device_nvs.hKyösti Mälkki
Change-Id: I9d500be609d61ccf234260216bd5aae3f78e91a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48802 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-31soc/mediatek/mt8192: Move flash_controller.c to common/Yidi Lin
The flash controller driver can be shared among mt8173 and mt819x. TEST=boot to kernel on Asurada boot to kernel on Hana (w/o BL31) Change-Id: I4e5213563189336496122a0f2d8077b3e5245314 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-31soc/mediatek/mt8192: Add DDR mode register initHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: If200f4dcef0b1d0b7e901d4ae6e667b1f75156f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Do dramc duty calibrationHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I317451e41774e983c07566dc71c7ba8833c7f55e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Add dramc 8 phase calibrationHuayang Duan
To get better PI linearity, perform 8 phase calibration to do MCK 0/180/45 training and select the best PI settings. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: Ib4ccaa8d43b8382cbc64cf82de86ad1ac16cb89a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Update initial settings of dramcHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I08326cd1e6f7415d3a91d1591678e1b2c52c6781 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-30drivers/intel/gma: Include gfx.asl by default for all platforms...Matt DeVillier
which select INTEL_GMA_ACPI. Rework brightness level includes and platform-level asl files to avoid duplicate device definition for GFX0. Include gfx.asl for Skylake/Kabylake, since all other soc/intel/common platforms already do. Adjust mb/51nb/x210 to prevent device redefinition. Some OSes (e.g. Windows, MacOS) require/prefer the ACPI device for the IGD to exist, even if ACPI brightness controls are not utilized. This change adds a GFX0 ACPI device for all boards whose platforms select INTEL_GMA_ACPI without requiring non-functional brightness controls to be added at the board level. Change-Id: Ie71bd5fc7acd926b7ce7da17fbc108670fd453e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/intel/common: Move gfx.asl to drivers/intel/gmaMatt DeVillier
Adjust platform-level includes as needed. Change-Id: I376349ccddb95c166f0836ec1273bb8252c7c155 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/mediatek/mt8192: eint: unmask eint event mask registerG.Pangao
eint event mask register is used to mask eint wakeup source on mt8192. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel eint upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. BUG=b:169024614 Signed-off-by: G.Pangao <gtk_pangao@mediatek.com> Change-Id: I8ee80bf8302c146e09b74e9f6c6c49f501d7c1c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46409 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-30soc/intel/cnl: add Kconfig values for GMA backlight registersMichael Niewöhner
Add the right register values for backlight control to CNL's Kconfig. To make iasl happy about the reversed register order, split the field. Change-Id: I05a06cc42397c202df9c9a1ebc72fb10da3b10ec Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-30soc/intel: hook up new gpio device in the soc chipsMichael Niewöhner
This change adds the required gpio operations struct to soc/common gpio code and hooks them up in all socs currently using the gpio block code, except DNV-NS, which is handled in a separate change. Also, add the gpio device to existing chipset devicetrees. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: I81dbbf5397b28ffa7537465c53332779245b39f6 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48583 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29soc/intel/bdw,nb/intel/hsw: correct mask for panel power cycle delayMichael Niewöhner
Correct the mask for the power cycle delay from 0xff to 0x1f, to represent the actual maximum value according to Intel graphics PRM for Haswell, Volume 2c and Intel graphics PRM for Broadwell, Volume 2c. Change-Id: Ib187f1ca6474325475e5ae4cc1b2ffbce12f10bf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48957 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29soc/intel/alderlake: Update chipset.cb for TCSS and USBEric Lai
Follow TGL chipset.cb to add alias for TCSS and USB ports. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I803dad0af09b26a55ffb767826ba79cf61de04ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/48793 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29soc/intel/skylake: Add 4 missing root ports to chipset dtFelix Singer
The Kaby Lake PCH can have up to 24 PCIe root ports. Thus, add 4 missing root ports to the chipset devicetree. Change-Id: I443fb736873d47f1b6fe7718a10e1bb4ae5df2a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48947 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:03:09 +0000