summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-01-30soc/intel/skylake: Add support for mode-aware DPTFFurquan Shaikh
This change adds support for: 1. Handling thermal trip points change event handler based on device mode. 2. Returning thermal trip point temperatures based on the device mode. BUG=b:72554519 Change-Id: Ife48af76ceb7a39abd1fac8ef1f77db7e65ab43e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-01-30soc/amd/stoneyridge: initialize i2c buses marked as early initAaron Durbin
Initialize the i2c buses that are marked as early init in the device tree. BUG=b:70232394,b:69250772 Change-Id: Iced1797f3bb4765646736c423b081cdc33c12a48 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-30soc/amd/stoneyridge: fix gpio_acpi_path()Aaron Durbin
The path for the GPIO devices needs to be '\_SB', not '\SB'. Fix the path so that it references the system bus. BUG=b:72121803 Change-Id: I7c6c38ecea0f8f95ff52b3390f92c5b7e79bcd6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23501 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-30soc/amd/stoneyridge: use new host controller programmingAaron Durbin
The SPI controller on stoneyridge apparently has a large fifo and an alternate method for programming the controller. The fifo is directly accessible as well as the rx and tx pointer in addition to the execute bit. Remove the unneeded #defines and program the host controller with the above changes in mind. In addition, add debug hooks to the driver so one can dump the state of the controller when in operation. The time it took to read 4KiB of flash in the elog driver went from 20593 microseconds to 5693 microseconds on cdx03/kahlee. BUG=b:65485690 Change-Id: Ie7ea9d18cef5511686700ad9b2b9fdfeb6d5685b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23493 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-30soc/amd/stoneyridge: utilize full SPI flash controller fifoAaron Durbin
The spi flash host controller has a dedicated register for the opcode. Therefore, indicate to the spi subsystem that the opcode size should not be taken into account when determining maximum payload size in spi_crop_chunk(). This allows the full use of the fifo when doing transfers. BUG=b:65485690 Change-Id: Iab27a69ca72fd02bc443f0673983f3b22ffca0f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23492 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-30drivers/spi: support cmd opcode deduction for spi_crop_chunk()Aaron Durbin
spi_crop_chunk() currently supports deducting the command length when determining maximum payload size in a transaction. Add support for deducting just the opcode part of the command by replacing deduct_cmd_len field to generic flags field. The two enums supported drive the logic within spi_crop_chunk(): SPI_CNTRLR_DEDUCT_CMD_LEN SPI_CNTRLR_DEDUCT_OPCODE_LEN All existing users of deduct_cmd_len were converted to using the flags field. BUG=b:65485690 Change-Id: I771fba684f0ed76ffdc8573aa10f775070edc691 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23491 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-29rockchip/rk3399: Support LONG_WRITE type in MIPI DSILin Huang
Some panels need to transfer initial code, and some of them will be over 3 bytes, so support LONG_WRITE type in driver. Refactor mipi dsi transfer function to support it. Change-Id: I212c14165e074c40a4a1a25140d9e8dfdfba465f Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/23299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-01-29intel: Prepare registers so Windows drivers are happierPatrick Georgi
Change-Id: I12ebed30de4df9814ccb62341c7715fc62c7f5b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/23431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-28soc/intel/denverton_ns: Rename HARCUVAR macros to DENVERTONJulien Viard de Galbert
Harcuvar is the board name, Denverton is the SoC. So macros in files under soc/ should be named after the SoC not the board. Change-Id: I1c7d5b93fba386b8e9bd86cf599508e642e21a75 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shine Liu <shine.liu@intel.com> Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-28amd/stoneyridge: Add NV storage to ramtopMarshall Dawson
The scratch registers in northbridge used for storing the top of cacheable memory are volatile. Use the BiosRam storage in the FCH instead. TEST=Suspend and resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: Ieb3cfd173c70bf899a6391d62d1df87b38485f30 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-26soc/intel/cannonlake: Add Cannonlake D0 support in mpinit and reportLijian Zhao
Both early platform information reporting in bootblock and common code CPU driver will add support for cannonlake D0 stepping processor. BUG=None TEST=Boot up system with D0 stepping CPU installed, check serial log that can display as D0 stepping. Change-Id: I76ee974ee027100d7853a110f95b1601987492e4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-26soc/intel/apollolake: select NO_UART_ON_SUPERIORavi Sarawadi
If not, legacy COM ports will be enumerated by kernel and console will not work. localhost ~ # cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 1: uart:16550A mmio:0xC112D000 irq:4 tx:764 rx:0 RTS|DTR 2: uart:16550A mmio:0xC112F000 irq:6 tx:0 rx:0 3: uart:unknown port:000002E8 irq:3 With this fix: 0: uart:16550A mmio:0xC112D000 irq:4 tx:0 rx:0 1: uart:16550A mmio:0xC112F000 irq:6 tx:858 rx:42 RTS|DTR 2: uart:unknown port:000003E8 irq:4 3: uart:unknown port:000002E8 irq:3 Change-Id: Iac5bf65900e090d4e785e0cd828272ebff209458 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/23219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-26amd/stoneyridge: Convert BiosRam access to MMIOMarshall Dawson
Change the BiosRam read/write functions to use the fixed MMIO range at 0xfed80500. This is faster than two accesses per byte when using I/O 0xcd4/0xcd5. Note that BiosRam may only be accessed byte-by-byte. It does not decode normally. Change-Id: I9d8baf2bd5d9d48a87bddfb6a0b86e292a8fdf7d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23436 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-01-26soc/amd/stoneyridge: fix compilation errorAaron Durbin
The following two patches were independent, but they were merged together. However, the first one changed the API that the second was originally was written against. Fix build. b94a2750 (i2c/designware: reduce API complication for bus config) 13101a7b (soc/amd/stoneyridge: Add I2C devicetree support) BUG=b:72121803 Change-Id: I3678a8f414572dd2227c42ce5585daf6bc933df5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23445 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25soc/amd/stoneyridge: remove dependence on TSCAaron Durbin
The TSC rate is empirically swinging during early boot. That leaves timestamps and udelay()s to not be correct. To rectify this stop using TSC for all of these time sources. Instead use the performance TSC which is at a fixed 100MHz clock. That provides stable time sources and legit timestamps. BUG=b:72378235,b:72170796 Change-Id: Ia2693c415c557aac687bcb48ee69358ea1c53d67 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25drivers/i2c/designware: reduce API complication for bus configAaron Durbin
Right now dw_i2c_get_soc_cfg() is expecting the SoC to implement that callback for obtaining the bus config. However, we're currently forcing another parameter of struct device so one can do the lookup. This works for Intel-based systems since the struct device was needed to program the BAR, etc. However, from an API standpoint, it just complicates matters by needing to obtain the struct device. The SoC already has knowlege of its own devices so it can get the config itself by bus number. Therefore, remove that contraint from the API. BUG=b:70232394 Change-Id: Id8558f5deedda0963a46a532a7bf984e168fb270 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23420 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25soc/amd/stoneyridge: Add I2C devicetree support.Justin TerAvest
This commit establishes the stoneyridge implementation for i2c entries in the devicetree.cb file. BUG=b:72121803 Change-Id: I0d923609bd8fce94c9aee401a5ae2811281b60e5 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-25src/amd/stoneyridge: Add devicetree ACPI namesJustin TerAvest
This commit adds device name to ACPI name bindings for various entries in the devicetree. BUG=b:72121803 Change-Id: I5564e4a7e56fdd1bc9f34497bdb78383093a2ba3 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-25src/soc/amd/stoneyridge/Kconfig: Use vbios new locationRichard Spiegel
3rdparty/blobs was updated to move northbridge/amd/00670F00 contents into soc/amd/stoneyridge. Now soc/amd/stoneyridge/Kconfig needs to be updated to use VBIOS.bin new location. BUG=b:70785272 TEST=Update 3rdparty/blobs master branch, try to build kahlee. It should fail. Update soc/amd/stoneyridge/Kconfig, try to build kahlee again, it should work (need to rebuild .config first). CQ-DEPEND=CL:881709 Change-Id: I8cb9874eedc4a5d41d42b3f727c6d3cb9b920b5a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-25soc/intel/skylake: Clean up the skylake PCH H device ID macrosV Sowmya
Rename the device ID macros as per the skylake PCH H external design specification. Change-Id: I4e80d41380dc1973d02bc69ac32aad5c4741a976 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23381 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-25soc/intel/cannonlake: enable pch link in bootblockCaveh Jalali
This moves the call to pch_enable_lpc() from romstage to bootblock. In other words, it happens earlier in the boot process. Turns out, we need this to talk to the EC to determine if we're in recovery mode or not. BUG=b:69011806 TEST=boots to linux Change-Id: I899bf343d705fe19a2978917bc88990495ebb5a3 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/23401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25soc/intel/skylake: Send correct ddr_type to SMBIOS TableBarnali Sarkar
The FSP 2.0 Memory_Info_HOB for KBL is not sending "MemoryType" value as what is required for SMBIOS Table according to SMBIOS Spec. Thus, converting the value retrieved from FSP HOB to the correct value. This change will not be required for upcoming SOCs since FSP have fixed this issue in its next platforms and thus it will take care and send the correct value in "MemoryType" field based on SMBIOS spec. Thus this conversion from coreboot will not be required in the next platfoms. "MemoryType" value can be directly passed to dimm_info_fill() function. BUG=none BRANCH=none TEST=Tested in Soraka, and getting the value as 0x1D for LPDDR3 memory. dmidecode (latest version 3.1) Command Type 17 will also show correct information. Currently, it was showing "Unknown". Change-Id: I75d6cca464680a88bf836e25bf5440a9cdbc738e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/23384 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-24soc/amd/stoneyridge/spi: do not open code existing CAR APIsAaron Durbin
The CAR APIs already exist to deal with proper type useage. Don't open code things that already exist. BUG=b:65485690 Change-Id: I09593401513f6060a30cf5c02c94d14afbe8f4fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-24soc/amd/stoneyridge: provide alternate monotonic timerAaron Durbin
The TSC has been observed to be ticking at a non-constant rate in early boot. The root cause is still not known, but this misbehavior necessitates an alternative monotonic timer source. Use the perf TSC which ticks at 100 MHz. This also means the timestamp table is not accurate as well. Root cause of TSC rate instability needs to be resolved in order to fix that. BUG=b:72170796 Change-Id: Ie052169868a9d9f25f8cc0ce8dd8251b560e671f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-24soc/intel/cannonlake: Add child CARD device into eMMC/SD controllerSubrata Banik
For the internal eMMC to be used by non-chrome for installation, the CARD device and _RMV methods are required. Without these, other OSes does not show the eMMC as a valid installation target. TEST= boot CNL-RVP with Tiano payload and install Windows 10 to the internal eMMC drive. Change-Id: Icfdccd88bc113d97c2fabf4c63d8d772737a6057 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-24soc/intel/cannonlake: Port SD Controller W/A from Intel Reference codeSubrata Banik
Solution: To do an additional config read to the SD controller after the controller has been power gated (put to D3) Change-Id: Ia2438c767332b0e2d413c71b06b052bf9ab4a96c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-24soc/intel/cannonlake: Port eMMC controller W/A from Intel Reference codeSubrata Banik
Solution: To do an additional config read to the eMMC controller after the controller has been power gated (put to D3) Change-Id: Ieac939c9108e84ba6c7c26b1a49aaf829d8456b7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-24drives/i2c/designware: incorporate device_operations supportAaron Durbin
In ramstage the device_operations are needed for the i2c designware host controller. Move the intel/common/block/i2c implementation into the generic driver so other platforms can take advantage of it. BUG=b:72121803 Change-Id: Id249933fadcc016bfba00e7a6d65f56dfc220724 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-01-24drivers/i2c/designware: namespace soc functionsAaron Durbin
Rename the following functions to ensure it's clear that the designware i2c host controller driver is the one that these functions are associated with: i2c_get_soc_cfg() -> dw_i2c_get_soc_cfg() i2c_get_soc_early_base() -> dw_i2c_get_soc_early_base() i2c_soc_devfn_to_bus() -> dw_i2c_soc_devfn_to_bus() i2c_soc_bus_to_devfn() -> dw_i2c_soc_bus_to_devfn() BUG=b:72121803 Change-Id: Idb7633b45a0bb7cb7433ef5f6b154e28474a7b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23371 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-23google/kahlee/BiosCallOuts.c: Remove platform_FchParams_resetRichard Spiegel
Function platform_FchParams_reset() is now an empty function, remove it, its header declaration and its use. BUG=b:64140392 TEST=Build kahlee. Change-Id: I3f3efc072a2e198433d0e261dacbbd4a8ff327d7 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23soc/amd/stoneyridge: Add new function sb_program_gpio()Richard Spiegel
Add new function sb_program_gpio to be called after AGESA init_reset and some point within ramstage. For AGESA init_reset, change amd/stoneyridge/bootblock/bootblock.c function bootblock_soc_init (add the function after the call to AGESA function). BUG=b:64140392 TEST=Build kahlee, grunt, gardenia. Change-Id: I38da26cd1e20617958a6b17d55b7d7c08b8a0230 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22987 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-23soc/amd/stoneyridge/southbridge.c: Create a GPIO programming functionRichard Spiegel
Create a GPIO programming function that can be called from multiple stages (bootblock, romstage and ramstage) that will program only the GPIO specific to the particular stage. Add dummy table to kahlee, grunt and gardenia to be able to test a build. BUG=b:64140392 TEST=Build kahlee, grunt and gardenia with GPIO programming call at bootblock. This call is removed before commit, so bootblock.c is not committed. Change-Id: I88d65c78a186bed9739bc208d5711a31aa3c3bb6 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23src/soc/intel/cannonlake: Update C-state latency control limitsVaibhav Shankar
PC10 is a necessary condition for S0ix entry. With the current C-state limits, CPU fails to enter PC10 during S0ix. C-state Latency control limits have to be tuned to new values for PC10 entry. Change-Id: I0f5227f9c3c10c5a9e335ab118eb0ec185445374 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/23220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23mainboard/intel/cannonlake_rvp: Add support for MAX98373 speaker ampN, Harshapriya
Add NHLT and dt support for max98373 amp BUG=None TEST=check SSDT and verify entries for max98373 TEST=check NHLT ACPI tables included blobs for max98373 Change-Id: I0b402f89f1ece9e62a394f713c4b0feff29bd1e5 Signed-off-by: N, Harshapriya <harshapriya.n@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23mainboard/intel/cannonlake_rvp: Add support for SND_MAX98357_DA7219Lijian Zhao
Add NHLT and dt support for Audio with Max98357 and DA7219 TEST=verified NHLT tables and SSDT entries BUG=None Change-Id: If7960eb6bb441f35cbd9a8a6acc37f03e04e3b70 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23soc/intel/cannonlake: Add audio NHLT supportLijian Zhao
Add audio NHLT support for cannonlake, reference code is implementation in apollolake. CQ-DEPEND=CL:*533799 BUG=None TEST=None Change-Id: Ie8561cc64412bef54329b317874a8fe12e0bf889 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-22amd/stoneyridge/include/soc/southbridge.h: Replace SATA magic numbersRichard Spiegel
CONFIG_STONEYRIDGE_SATA_MODE is compared against "magical numbers". Because actual literals are in AGESA.h and adding agesa_headers.h to southbridge.h causes compile errors, move comparison code from southbridge.h to southbridge.c (where they are actually used). Replace these numbers with actual literals. BUG=b:71754828 TEST=Build kahlee. Change-Id: I711473bf492d5ceca026ccd112c2c389a23bdbf9 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-22AMD/stoneyridge: Fix SATA reset inconsistencyRichard Spiegel
At AGESA AmdInitReset, SATA enable and IDE enable (elements of FCH_RESET_INTERFACE) are programmed twice (before calling AGESA for AmdInitReset and from said AGESA function call out), using different functions with different results. The first would result in TRUE/FALSE, the second set would result in TRUE/TRUE. Use the functions of the second set within the first set, and remove them from the second set. BUG=b:71754828 TEST=Build kahlle without the change, boot and record output. Rebuild kahlee with the change, boot and record output. Compare both outputs, the should be no change except in timing. Change-Id: I326fcc8801542aa7feef286d02abdfe63354cdd0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-19amd/stoneyridge: Remove unused S3 NVRAM save/restoreMarshall Dawson
Remove the BiosRam read and write functions that were brought over from the hudson source. The functionality will be superseded later with new general-purpose functions. Change-Id: Ib80c66b838fdbdd388a392b4fedaac36bf0bbb0c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22725 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/stoneyridge: Add BIOS RAM R/W functionsMarshall Dawson
The internal FCH contains 256 bytes of "BiosRam" that maintains its state until RSMRST# is asserted or standby power is lost. Add functions to support read and write operations. Change-Id: I2ddf58a63e69b2775de9a8163534b13dad2ea2fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-19amd/stoneyridge: Move SB index/data pairs to iomap.hMarshall Dawson
Relocate the I/O registers to the iomap for PM, PM2, and BIOSRAM. Change-Id: I3a59adc974a8a90bfc586188b829a7252356b3cb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22723 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/stoneyridge: Move acpi_get_sleep_type to sb_utilMarshall Dawson
Relocate the acpi_get_sleep_type() function out of the southbridge ramstage file. This will make it more convenient for using elsewhere. Change-Id: Id7ba709bb867fb00ed6c7fa7526de087a3b9b3ca Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-19soc/amd/common: Make agesa_heap_base non-staticMarshall Dawson
The cbmem location holding the heap will be used to store additional information in subsequent patches. Remove the static designation from agesa_heap_base. Change-Id: Ic607432fd6500ef69b5d47793896cf12a699d8b7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22721 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/common: Remove GetHeapBase camel caseMarshall Dawson
A subsequent patch will use GetHeapBase() in more files than heapmanager.c. Convert it to a format more similar to existing coreboot source. Change-Id: I8362af849fc9d7cb1b8a93113e8d78dcac51c20a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-19amd/common: Define regions in AGESA cbmemMarshall Dawson
In 6c747068 "amd/stoneyridge: Put AGESA heap into cbmem" the AGESA heap was moved completely into cbmem. This was a departure from the "late cbmem init" method of adding it late in post, then storing the S3 volatile data to the region. Remove the hardcoded base address that was missed in that commit. To prepare for S3 support, split the region into subregions for heap, AGESA's S3 volatile storage, and an MTRR save area. BUG=b:69614064 Change-Id: I06c137f56516f3a04091d1191cd657a0aa07320b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-19amd/common/s3: Remove legacy spi.cMarshall Dawson
Remove the original spi.c file that writes S3 NV data to flash in a proprietary format. The s3 folder is retained to facilitate new development. Change-Id: I1b5fe8e854c3d2dd71506c2acd6ff73e4b86d7d4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
* Rename tlcl* to tss* as tpm software stack layer. * Fix inconsistent naming. Change-Id: I206dd6a32dbd303a6d4d987e424407ebf5c518fa Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
* Move code from src/lib and src/include into src/security/tpm * Split TPM TSS 1.2 and 2.0 * Fix header includes * Add a new directory structure with kconfig and makefile includes Change-Id: Id15a9aa6bd367560318dfcfd450bf5626ea0ec2b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-17soc/intel/cannonlake: Reserve PMC IO resourcesSubrata Banik
PMC controller gets hidden during FSP Silicon initialization using sideband interface on CNP-PCH. Hence unable to reserve PMC IO resources during PCI enumeration process. This causes hang issue on non-chrome platform with CNP-PCH due to ABASE corruption. This patch ensures PMC IO resource (ABASE) is getting reserved (IO address 0x1800-0x1900) and ACPI base is not overwritten by other devices. TEST=ABASE range is reserved along with LPC IO range during PCI enumeration. PCI: 00:1f.0 resource base 1800 size 100 align 0 gran 0 limit 0 flags c0000100 index 20 Change-Id: I1fbc4339ae11058fb3daedf4ffedda1904fa52ec Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-17soc/intel/common: Add option to pass SoC IO resourceSubrata Banik
This patch ensures common block has option to reserve IO resources based on SOC requirements. Also add pch_lpc_ prefix to maintain same function nomenclature across all intel common block. Change-Id: Ic00af688104bcea1aff06be6cbb20208a60e5f1d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-17soc/intel/apollolake/meminit_util_glk.c: Check for NULLRavi Sarawadi
We check for NULL here for memory_info_hob and return if it's NULL so that the future dereferencing is proper. Change-Id: Ie34931504ad92739fdaa68ec7989e76e8eee2595 Found-by: Klockworks Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/23223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-17soc/intel/apollolake: Fix prev_sleep_state on G3 exitHannah Williams
If waking up from S5, then prev_sleep_state was correct but not when waking up from G3. Change-Id: I39011a0846f042d224a7cd65f736e749acc8ec75 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23221 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-17soc/amd/common/block/pi: Fix AGESA heap deallocatorMarc Jones
The deallocation was always subtracting the header, even when it shouldn't. This caused problems for the allocator where buffer sizes were incorrect and freed and used buffers could collide. Fix the deallocation size. Clear deallocated concatinated buffer header memory. Fix the initial calculation of the total buffer size available to be allocated. BUG=b:71764350 TEST= Boot grunt. BRANCH=none Change-Id: I2789ddf72d662f24709dc5d9873741169cc4ef36 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-17soc/intel/cannonlake: Add option to select FSP_CARSubrata Banik
This patch provides an option for non-chrome devices to make use of FSP-T for performing cache-as-ram initialization. Majority of IOTG users are using FSP-T for CAR implementation and aren't able to select FSP_CAR Kconfig from SoC without conflicting with existing CAR config. TEST=Ensure that both the Chrome platform and non Chrome OS platform can select either CAR implementation based on Kconfig options FSP_CAR or CAR_NEM_ENHANCED. By default Chrome platform choose CAR_NEM_ENHANCED Kconfig and non Chrome platforms choose FSP_CAR by default. Change-Id: If565b649fe1c2abdbcf0a740c15db7253c084ae7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-16soc/intel/cannonlake: Program DMI PCR settingsLijian Zhao
According to CNL PCH BIOS spec (570374) 2.4.1, DMI cycle decoding needs to be programmed before it gets locked. Update lpc programming to add decode programming on DMI side as well. Also enabled io port 0x200 decoding by default. BUG=b.70765863 TEST=Apply changes and add chromeos EC decoding in mainboard devicetree.cb, then read back IO port in depthcharge cli and check that return is not zero. Change-Id: I6b8f393c92cbd0632fed86212ae384ff53c9f8c3 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-16soc/intel/apollolake: Set ACPI_FADT_LOW_PWR_IDLE_S0 for S0ixShaunak Saha
This patch sets the ACPI FADT flag ACPI_FADT_LOW_PWR_IDLE_S0 if S0IX is enabled for the platform. TEST= Boot to OS and check the ACPI_FADT_LOW_PWR_IDLE_S0 flag is set in FACP table. Change-Id: Ibb43d5c8024dcdf753416e4bd2a457991cc7a433 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/23095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-15Intel sch board & chip: Remove - using LATE_CBMEM_INITMartin Roth
All boards and chips that are still using LATE_CBMEM_INIT are being removed as previously discussed. If these boards and chips are updated to not use LATE_CBMEM_INIT, they can be restored to the active codebase from the 4.7 branch. chips: soc/intel/sch Mainboards: mainboard/iwave/iWRainbowG6 Change-Id: Ida0570988a23fd0d13c6fcbe54f94ab0668c9eae Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/22027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-01-15DMP Vortex86ex board & chip: Remove - using LATE_CBMEM_INITMartin Roth
All boards and chips that are still using LATE_CBMEM_INIT are being removed as previously discussed. If these boards and chips are updated to not use LATE_CBMEM_INIT, they can be restored to the active codebase from the 4.7 branch. chips: soc/dmp/vortex86ex Mainboards: mainboard/dmp/vortex86ex Change-Id: Iee7b6005cc2964b2346aaf4dbd9b2d2112b7403f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/22026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-01-13soc/amd/stoneyridge: Add definition for GENINT_DISABLEMartin Roth
BUG=b:71867096 TEST=None Change-Id: Ic8111d34355e6667c37a51d285ebb50c1659f4e5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-13soc/amd/stonyridge: Give I2C devices unique _UIDsDaniel Kurtz
The ACPI unique identifier (_UID) should be unique. This doesn't actually matter much for Linux, though, since the kernel can handle it when the BIOS doesn't get this right. See: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b4b6cae2f36d92b31788f10816709d5290a1119a b4b6cae2f36d ACPI / platform: use ACPI device name instead of _HID._UID Change-Id: I8b1b3143174584a93f3d45bf482b8922b3f0ec12 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-01-13Revert "soc/amd/common/pi: Fix issue in AGESA heap allocator"Marc Jones
This reverts commit 0f5651584ebb8e2ccfa151275bfd2f70e74bae9b. This is not the correct fix for the heap allocator. It looks like the root cause is in the buffer size of the deallocate function. Change-Id: I33c479a30d89a665677d3e4914194ae8136504af Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23245 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-12soc/intel/common/block: Check for NULL before dereferenceShaunak Saha
We check for NULL from the return of function acpi_device_path before passing it to acpigen_write_scope to avoid NULL pointer dereference. Change-Id: I997461c9b639acc3c323263d304333d3a894267c Found-by: Klockworks Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/23094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12soc/intel/skylake: Override KBL IccMax settingsGaggery Tsai
According to Intel document #559100 KBL EDS v2.8, section 7.2 DC specifications, the IccMax setting for KBL-U, KBL-U42 and Celeron/Pentium are different. This patch overrides the IccMax settings for KBL-U/R/Y since device tree could not handle all KBL-U/R combinations when multiple SKUs are adopted in a project. Besides, it is inefficient to maintain the same code for all variants. Hence, place it in the common code so that all variants could leverage the benefits. +----------------+-------------+---------------+------+-----+ | Domain/Setting | SA | IA | GTUS | GTS | +----------------+-------------+---------------+------+-----+ | IccMax(KBL-U/R)| 6A(U42) | 64A(U42) | 31A | 31A | | | 4.5A(Others)| 29A(Celeron) | | | | | | 32A(i3/i5) | | | +----------------+-------------+---------------+------+-----+ | IccMax(KBL-Y) | 4.1A | 24A | 24A | 24A | +----------------+-------------+---------------+------+-----+ BUG=b:71369428 BRANCH=None TEST=Remove icc_max setting from devicetree & emerge-fizz coreboot chromeos-bootimage & Ensure the KBL-U42, KBL-U22 and Celeron SKUs are identified correctly and IccMax settings are passed to FSPS correctly. Change-Id: I291462b73d3fbd17f17975de7fd77dc48ca99251 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-12soc/intel/common: Add Intel HDA common block driverDuncan Laurie
There is common HDA code in soc/intel/common that provides generic HDA support functions, but it does not provide a driver. This change adds a common block driver for HDA that provides a ramstage driver for SOCs that need to initialize an HDA codec. This was tested on a board with an HDA codec to ensure that it properly detected it and ran the codec init steps. Change-Id: I41b4c54d3c81e1f09810cfaf934ffacafca1cf38 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12amd/stoneyridge: Keep SPI flash cacheable during POSTMarshall Dawson
A side effect of using the common MTRR assignment code is the flash device loses its WP setting and is no longer cacheable. After MTRR setup, reenable the setting for the duration of POST. TEST=Run on Kahlee and inspect MTRRs prior to AmdInitLate() BUG=b:70536683 Change-Id: Ib4924e96e2876e1e92121bb52d1931ead723d730 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-12soc/amd/common/pi: Fix issue in AGESA heap allocatorMarc Jones
The heap allocator would try to split a buffer node that was too small for another node. In the failing case, the buffer node was 0x140 bytes and the requested size was 0x133 bytes. The logic would check that there was room for the header and buffer and try to split the buffer node. The buffer node header is 0xC bytes, so 0x13F bytes are need. The problem is that it didn't leave room for another node header and a little space for a buffer. BUG=b:71764350 TEST= Boot grunt. BRANCH=none Change-Id: Iece5e12d5787415a335bb953985331a5dc312152 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-01-10soc/rockchip/rk3399: Ensure full eDP init sequenceEge Mihmanli
This patch fixes 2 edp display issues: 1. When rk_edp_prepare fails >3 times, edp_init isn't run because while-condition is not satisfied. Then, only a partial init sequence is ran. This causes all aux transactions to fail. 2. If rk_edp_prepare never succeeds, coreboot never leaves link training stage due to infinite loop. Boot process is stuck. TEST=Boot past eDP initialization stage and make sure AP logs don't have show aux transaction fails. Change-Id: I44c3f53e8786558c43078d4afe9acde4d64796e7 Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/23152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-01-10soc/intel/cannonlake: Add a call to gspi_early_bar_init in bootblockFurquan Shaikh
This change adds a call to gspi_early_bar_init in bootblock to allocate a temporary BAR for any GSPI buses that are accessed before resource allocation is done in ramstage. Change-Id: I82387a76d20fb272da6271dd9e5bf2c835d5b146 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22781 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-10soc/amd/common/block/acpi: Add halt.cChris Ching
Creating initial common acpi and implement halt.h BUG=b:71575631 BRANCH=none TEST=put poweroff() call in Kahlee's mainboard_final and board turns off correctly Change-Id: Ie7dd9851dcb240c53f2487b4f4b8a3e51d6b98d6 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/23074 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-09soc/intel/cannonlake: Remove redundent CNL CPUID macrosSubrata Banik
This patch ensures all CannonLake CPUIDs are part of mp_init.h hence remove duplicate macro definitions from SoC code. TEST=Build and boot CannonLake RVP Change-Id: Ibb6a22d5c708248bb53522f906cffb462142b7bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-08soc/amd/stoneyridge/i2c: fix formatting and global symbolAaron Durbin
The i2c_bus_address array doesn't need to be a global symbol. Also, the array initializer had some weird indention and there was an extra new line. For consistency the first entry is multiplied by 0 so the formatting is similar. BUG=b:69416132 Change-Id: I74f6dca3a22a245759536f792ce04ac61735b6d0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-01-08soc/intel/cannonlake: Initialize DDI-A lane in Normal modeAbhay Kumar
Enable DDI-A (eDP) when pre-OS graphics is not Loaded or in normal mode. This will make sure that kernel will detect eDP. TEST=Edp should come up in normal mode. Change-Id: I6353020f892f2d7b75997eace88b3074adc32aef Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/22799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-08soc/amd/stoneyridge: Define CONSOLE_UART_BASE_ADDRESSArthur Heymans
The build system for the SeaBIOS payload needs this when DRIVERS_UART_8250MEM is set. Set it to the first uart controller, which the coreboot code also seems to do. Fixes: https://ticket.coreboot.org/issues/150 Change-Id: I962f750f89e0352082e0b7415ceaa9bd350fdf0b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-07soc/amd/common: Only load post-memory AGESA into RAM when split enabledDaniel Kurtz
CONFIG_AGESA_SPLIT_MEMORY_FILES controls whether AGESA is split into pre- and post-memory binaries when it is built. Building AGESA this way is required when doing the new "load post-memory AGESA binary into ram" feature. Thus, condition this new path on the CONFIG option being enabled. BUG=b:71641792 TEST=build and boot kahlee with CONFIG_AGESA_SPLIT_MEMORY_FILES disabled Change-Id: Ibec9db67437c57092e0f7acf0e3185865dc02688 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23141 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-07soc/intel/cannonlake: provide LPDDR4 memory initNick Vaccaro
Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I4a43ea121e663b866eaca3930eca61f30bb52834 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/22204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-073rdparty/blobs/soc/amd/stoneyridge: Use new location of stoneyridge blobRichard Spiegel
Stoneyridge related contents of 3rdparty/blobs/southbridge/amd/kern were moved to 3rdparty/blobs/southbridge/amd/stoneyridge. Commit the new blob to coreboot, and modify src/soc/amd/stoneyridge/Kconfig to use it. BUG=b:69613465 TEST=Build and run kahlee. Change-Id: I1784824dc7767c620e2fcbad7c6e5674934832ff Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-05soc/intel/cannonlake: Correct PMC/GPIO routing informationLijian Zhao
PMC and GPIO DWx definition is not identical, hence update that to correct information. For cannonlake lp PCH, GPIO group C, group E and group GPD is different for PMC GPIO_CFG and GPIO MISCCFG. Also add function call to set up GPE routing in bootblock stage. TEST=Boot up into OS, and manually check PMC GPE status Change-Id: I1edb83edabc72e8a762b129cf51dcd936cd37ddf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-01-05soc/amd/common: load post-memory AGESA as rmoduleAaron Durbin
Now that the AGESA binary is split into two sections load the post-memory AGESA binary into ram. It needs to be an rmdoule so that it can be relocated into ram. agesawrapper_amdinitenv() entry CBFS: 'VBOOT' located CBFS at [10000:cfd40) CBFS: Locating 'AGESA_POST_MEM' CBFS: Found @ offset 875c0 size 11c5e Decompressing stage AGESA_POST_MEM @ 0xc757ffc0 (183452 bytes) Loading module at c7580000 with entry c7580000. filesize: 0x2bafc memsize: 0x2bb0d Processing 1112 relocs. Offset value of 0xc7780000 AGESA call 00020001 using c75818fe AGESA call 00020003 using c75818fe Fch OEM config in INIT ENV Done agesawrapper_amdinitenv() returned AGESA_SUCCESS BUG=b:68141063,b:70714803 TEST=Booted kahlee. Change-Id: Ic0454e0d6909cb34ae8be2f4f221152532754d61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-05soc/amd/common: Allow AGESA file split for pre- and post-memoryJustin TerAvest
By splitting the binary files for platform initialization, the post-memory code can be modified to stop executing in place (--xip). This change creates two separate sections in CBFS for AGESA and loads the appropriate file at the correct stage. BUG=b:68141063 TEST=Booted kahlee with split agesa enabled. Change-Id: I2fa423df164037bc3738476fd2a34522df279e34 Signed-off-by: Justin TerAvest <teravest@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-03soc/amd/stoneyridge: Add I2C supportChris Ching
BUG=b:69416132 BRANCH=none TEST=make Change-Id: Id940af917c9525aba7bc25eea0821f5f36a36653 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-02soc/amd/common/block/pi: Format files to standardsRichard Spiegel
Files agesawrapper.c and heapmanager.c have several non-conformity with coreboot standards, including lines longer than 80 characters, use of "} else {" after a return and wrong comment block formatting. Fix all such issues, so that it passes commit tests. BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, just file formatting). Change-Id: Iefe741cd62bc41a7975c3dd10ac9355352de3abb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-02soc/intel/skylake: Add device setting for sata power optimizationKane Chen
This change provides option in devicetree and feeds the option to FSP SataPwrOptEnable UPD for power saving purpose BUG=b:70491485 Change-Id: I9099c5c97765a118bdee64da303cb3ba6ceb951b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-23soc/intel/cannonlake: Select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2Furquan Shaikh
BUG=b:70628116 Change-Id: I40ebbb143b4618f83f454b9db2717589ba5ce99e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22956 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-23soc/intel/common/block/gspi: Add SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2Furquan Shaikh
Even though kaby lake and cannon lake are using the same GSPI controller, bit meanings (for polarity and state) in SPI_CS_CONTROL register are significantly different. This change provides a new Kconfig option that can be selected by SoCs using these new bit definitions of SPI_CS_CONTROL. Common code takes care of setting the right value for polarity and state field depending upon the version selected by SoC. BUG=b:70628116 Change-Id: Ic69321483a58bb29f939b0d8b37f33ca30eb53b8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-23soc/intel/{apollolake, cannonlake, common, skylake}: Add _soc_ prefix in ↵Subrata Banik
weak function This patch ensures all soc function name is having _soc_ prefix in it. TEST=Able to compile SMM common code for all supported SOC. Change-Id: Iab1b2f51eaad87906e35dbb9e90272590974e145 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/amd/stoneyridge/chip.c: Move setup_bsp_ramtop to soc_init()Richard Spiegel
Issue first reported at commit 1587dc8a2b, the call of functions setup_bsp_ramtop() and setup_uma_memory() should be moved from enable_dev() to soc_init(). The function setup_uma_memory() no longer exists, its functionality transfered to agesawrapper_amdinitpost. Move setup_bsp_ramtop() as required. BUG=b:62240756 TEST=Build and boot kahlee. Change-Id: I44e6cab17a8f7f364fc57657f41b211ec9d17641 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-22soc/intel: Treat time-out as failure in HECILijian Zhao
If HECI gets times out when waiting for read slots, there's no need to read back reply message to decide if the HECI recieve successed or not. Otherwise, system will stuck after global reset required. BUG=b:707290799 TEST=Boot up meowth board without battery, and confirm hard reset got trigged after heci time out. Change-Id: I7c1655284d7027294d8ff5d6a5dbbebe4cbd0c47 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22amd/stoneyridge: Increase pre-cbmem console sizeMarshall Dawson
The existing stoneyridge pre-cbmem console log contains about 250 bytes of unused space. Increase this amount to accomodate any additional debug messages. BUG=b:64980233 TEST=Build and boot Kahlee, inspect console log with "cbmem -c" Change-Id: Ia307795e91d81ff9b2be027916081f6824f90bad Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion supportDivya Chellap
New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure clock source number of PCIe root ports. This UPD array is set to clock source number(0-6) for all the enabled PCIe root ports, invalid(0x1F) is set for disabled PCIe root ports. BUG=b:70252901 BRANCH=None TEST= Perform the following 1. Build and boot soraka 2. Verify PCIe devices list using lspci command 3. Perform Basic Assurance Test(BAT) on soraka Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/amd/stoneyridge: select RTCMarc Jones
Stoneyridge has an RTC. Elog requires it for timestamps. BUG=b:65485690 TEST=Build Kahlee with Elog. Check mosys eventlog list for timestamps. Change-Id: I4d820fbe11043e7e3153d67159f52274d5f14bae Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-22soc/intel/skylake: Make use of common SMM code for SKLSubrata Banik
This patch ensures skylake soc is using common SMM code from intel common block. TEST=Build and boot soraka/eve Change-Id: I8163dc7e18bb417e8c18a12628988959c128b3df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/22826 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-22soc/intel/cannonlake: Add SoC API to make use SMM common codeSubrata Banik
Add SoC API to detect any illegal access to write into the BIOS located in the FWH. Change-Id: If526cbae9afee47fa272bdf74e04416aff100e88 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22soc/intel/common: Add missing SoC common function into SMM librarySubrata Banik
Modify SMM common code in order to accommodate SKL, CNL, APL, GLK SOC code. Change-Id: Ie9f90df3336c1278b73284815b5197400512c1d2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22869 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21soc/intel/cannonlake: Implement pmc_soc_restore_power_failure as per EDSSubrata Banik
TEST=CNL_RVP is able to power on after reconnecting power supply. Change-Id: I41e655fe79d958cce9e627ea2f2380185364ab19 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22840 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21soc/intel/skylake: Move Enable power button SMI code from smi.c to pmc.cSubrata Banik
Original commit hash aeb2d64c85ca2c3a77f50d57e3a92f6fc0a5c2d3 (soc/intel/skylake: Enable power button SMI when jumping to payload) Change-Id: Ia4fe2694006baf24ed475c85aaffa6a0d2a6031d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22868 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21soc/intel/skylake: Implement pmc_soc_restore_power_failure as per EDSSubrata Banik
TEST=KBL_RVP is able to power on after reconnecting power supply. Change-Id: Ic707164a576ffb25418eb6553843cd8edc608800 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-21soc/intel/common: Add API to restore power failure into PMC common codeSubrata Banik
PMC config register need to program to define which state system should be after reapplied power from G3 state. 0 = System will return to S0 state 1 = System will return to S5 state 2 = System will return to previous state before failure Refer to EDS for detailed programming sequence. Change-Id: I0ce2cc77745d00a8cfe3eed7c6372af77e063d02 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22838 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-20soc/intel/apollolake: Add SMI and SCI support for ESPIShaunak Saha
This patch adds the SMI bits for SMI_EN, SMI_STS and GPE register in pm.h. The southbridge handler for espi smi is also added. In gpe.h we add GPE0A_ESPI_SCI_STS which is bit 20 in GPE register and enables the setting of the ESPI_SCI STS bit to generate a wake event and/or an SCI/SMI. TEST= Boot to OS. Change-Id: I2b8372ffbe0949ddd4aa83bdd7c0a01ade3ed40e Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-20soc/intel/denverton_ns: Add Denverton-AD system agent idLew, Chee Soon
This is to add support for Denverton-AD soc. Change-Id: I539abedd65bcbdb97b64f58d0b2273ff8eb67420 Signed-off-by: Lew, Chee Soon <chee.soon.lew@intel.com> Reviewed-on: https://review.coreboot.org/22605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>