summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2019-05-15soc/intel/broadwell/romstage: Clean up unused bist variableArthur Heymans
Checking BIST is done in the bootblock. Change-Id: I3ea2eb6a37c038f7348f0abd2056eee5c07bdb9d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32757 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/broadwell: Enable LPC/SIO setup in bootblockArthur Heymans
This allows for serial console during the bootblock and enables bootblock console by default. Change-Id: I7746e4f819486d6142c96bc4c7480076fbfdfbde Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-15nb/intel/broadwell: Add an option for where verstage startsArthur Heymans
Previously broadwell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. With a separate verstage the romstage becomes an RW stage. The mrc.bin however is only added to the RO COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I900233cadb3c76da329fb98f93917570e633365f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/broadwell: Use C_ENVIRONMENT_BOOTBLOCKArthur Heymans
This puts the cache-as-ram init in the bootblock. Before setting up cache as ram the microcode updates are applied. This removes the possibility for a normal/fallback setup although implementing this should be quite easy. Setting up LPC in the bootblock to output console on SuperIOs is not done in this patch, therefore BOOTBLOCK_CONSOLE is not yet selected. Change-Id: I44eb6d380dea5b82e3f009a46381a0f611bb7935 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15soc/intel/broadwell: Use the common cpu/intel/car romstage entryArthur Heymans
The only functional difference is the use of stack guards. Change-Id: I95645271e0d93a97f544a1cc4e9a4320738e6a20 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15vboot: remove OPROM-related codeJoel Kitching
As of CL:1605641, vboot2 code should be used for setting and checking display init state. Remove all vboot1 OPROM-related code, and use the vboot2 display init code which has already been added in previous commits. coreboot should not be reading vboot NVRAM flags directly. Remove the function vboot_wants_oprom(), and instead rely on display_init_required(), which uses the VBOOT_WD_FLAG_DISPLAY_INIT value stored in vboot_working_data.flags, initialized during verstage. Note that this means in the case of CONFIG_VBOOT=y, the return value of display_init_required() can only be trusted after verstage has been executed. This should not be a problem assuming that all display initialization occurs in ramstage. BUG=b:124141368, b:124192753, chromium:948529 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1605641, chromium:1605525 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/cannonlake: Support different SPD read type for each slotPhilip Chen
Also clean up cannonlake_memcfg_init. The major changes include: (1) Add enum 'mem_info_read_type' to spd_info. (2) Add per-dimm-slot spd_info to cnl_mb_cfg. (3) Setup memory config for each slot independently. (4) Squash meminit_memcfg_spd(). BUG=chromium:960581, b:124990009 BRANCH=none TEST=boot hatch, hatch_whl, and kohaku Change-Id: I686a85996858204c20fd05ef24787a0487817c34 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32513 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/amd/stoneyridge: Add ACPI D3Cold support for SD ControllerRaul E Rangel
We need to support entering D3Cold from the OS to work around a bug in the SDHC where the data lines get stuck always reading zeros. BUG=b:122749418 TEST=Verified the linux kernel can transition between D3 and D0. Also verified that the device can suspend and resume and continue to have a functioning SD controller after. Change-Id: Ifbf48f20c03a752ce3ff773296b536e92db16a62 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-14soc/intel/broadwell: Clean up the bootflowArthur Heymans
Call the raminit from a common location instead of from the mainboard specific code. Change-Id: I65d522237a0bb7b2c032536ede10e2cf93c134d8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32760 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-14soc/intel/broadwell: Don't use a pointer for pei_dataArthur Heymans
To improve the bootflow, the scope of the pei_data needs to be extended. Change-Id: Ic6d91692a7bf9218b81da5bb36b5b26dabac454e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-14soc/intel/broadwell: Move GPIO init to a common placeArthur Heymans
This also links the gpio configuration instead of including it as a header. Change-Id: I9309d2b842495f6cff33fdab18aa139a82c1959c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-13soc/intel/{cannonlake,icelake}: Drop unused cbmem.c fileElyes HAOUAS
Change-Id: Ib9444f7797289c9b8250cfb16eb1c12dff867ec3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-13{bd82x6x,i82801gx,ibexpeak,lynxpoint}: Remove dead code and use macroElyes HAOUAS
Use BIOS_CNTL defined macro instead of magic number. Change-Id: I0d2b555ada9c2893af4f85422128f5a8b04e2fc6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13soc/intel: Geminilake Refresh feature request supportJohn Zhao
Add 0x706a8 for GLK Refresh CPU stepping ID. BUG=b:132414963 BRANCH=None TEST=Image built successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I4641d9bd4c82211e7200f617cae9043b0f2f38d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-13soc/intel/braswell: Remove unused include <timestamp.h>Elyes HAOUAS
Change-Id: Ied645a583f78bc47c8358240acd639132fd499db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-05-13soc/intel/braswell: Add tsc_freq.c and pmutil.c in verstageFrans Hendriks
Systems with C_EVIRONMENT_BOOTBLOCK and VBOOT enabled requires functions tsc_freq_mhz(), vbnv_cmos_failed() and vboot_platform_is_resuming() in verstage. Add tsc_freq.c and pmutil.c to verstage. BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 + Building Google Banon Change-Id: Ia509eda6bf415aaa63be71013249493aa472289d Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-11soc/intel/cnl: Enable VT-dJohn Zhao
Enable VT-d through fsp upd VtdDisable. Update remapping structure types in numerical order as all remapping structures of type 0 (DRHD) enumerated before remapping structures of type 1 (RMRR), and so forth. BUG=b:130351429 TEST=Booted to kernel and verified the DMAR table contents. Change-Id: I1d20932e417b9d324edd98c8f2195dc228d2e092 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2019-05-10soc/amd/stoneyridge: Add IO access functions for PMxMarshall Dawson
Replace locations in the source that explicitely use the CD6/CD7 index/data pair with utility function calls. Change-Id: I6e7ba472ef2551e363987d18a79408fcd2074de4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-10soc/intel/braswell/smbus: Enable early SMBus in romstageMichał Żygowski
Enable early SMBus support compatible with SPD library using Intel SB common SMBus API. TEST=boot Protectli FW2B with new FSP, MemoryInit should pass without errors Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I92a2c5a6d0b38e5658cfdc017041f12717dabdd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-09soc/intel/cannonlake: Fix pcie clock numberLijian Zhao
Cannonlake PCH LP have total 6 pcie clocks and Cannonlake PCH H have total 16 pcie clocks. It is different with pcie root port numbers. BUG=CID 1381814 TEST=Build and boot up fine on sarien platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I909b5b584c596e6fe878ffe24d9cabc53c4576ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/32672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-09Change the guard for bootblock_systemagent_early_init to ENV_BOOTBLOCKRonald G. Minnich
The definition of bootblock_systemagent_early_init was guarded by !ENV_RAMSTAGE. But it's only called in the bootblock. So guard it with ENV_BOOTBLOCK instead. Change-Id: I143cf72e4a63b176e4772575e7a60a2a611e4ad9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-09soc/intel/common/acpi: Remove EC PTS/WAK dynamic loadingLijian Zhao
Use CondRefOf to replace config optios for PTS/WAK acpi method dynamic loading. Then we can move EC PTS and WAK method to be under mainboard. BUG=N/A TEST=Build sarien source code, check build/dsdt.dsl have EC.PTS method included, build whlrvp soure, check build/dsdt.dsl don't have EC.PTS method. Both able to build pass. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I9f4bd7240832caf070e65039e4ba2d8656371da8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32371 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-08soc/amd/stoneyridge: Add iomux read/write functionsMarshall Dawson
Add functions to read and write the region in the AcpiMmio block. Convert gpio.c to use them instead of creating pointers. Change-Id: I2a0f44b6ec7261648cf0357b44a6c18dd40d1504 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-08soc/amd/stoneyridge: Finish read/write misc registersMarshall Dawson
Add 16 and 32-bit versions of read / write_misc functions. Find one access of the MISC block still using read8() and write8(), and convert it. Change-Id: I296c521ea7f43210db406013bbe79362545ce6f3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-08soc/amd/stoneyridge: Add aoac_ read/write functionsMarshall Dawson
Add 8-bit functions to access the AOAC registers and use them in southbridge.c. At this time, there is no reason to pursue WORD or DWORD access and it's not known if those transaction sizes are supported. Change-Id: I3a8f493625f941fb855c0b8a0eff511a9a5ddfe8 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-08soc/amd/stoneyridge: Rewrite smbus_read/write, add asfMarshall Dawson
Convert smbus_read8() and smbus_write8() functions to use the same arguments as the other AcpiMmio blocks, and add 16 and 32 bit versions. Add matching functions for the ASF controller. Change-Id: I3b0ecf21f20472245da98ab5e711a54e99dca93a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-08soc/amd/stoneyridge: Rearrange sb_util.cMarshall Dawson
In preparation to move code to a common directory, rearrange some of the functions in sb_util.c. Add various comments. This change should have no functional differences. Change-Id: I1ad55a4a14a27e45459dcaf2fcc7449e29da6d4b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-05-08soc/amd/stoneyridge: Rename AcpiMmio blocksMarshall Dawson
A subsequent patch will move the AcpiMmio support into amd/common. Take this opportunity to rename the blocks in the 0xfed8xxxx region with more consistency. Change-Id: I9a69a6ecfc10f78b4860df05a77a061d2fc8be7d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-07mb/google/sarien: Add SMBIOS type 9 fieldsLijian Zhao
Fill SMBIOS type 9 fields for both sarien and arcada platform. BUG=b:129485789 TEST=Boot up into OS and check with dmidecode -t 9 to we do have entry. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I47a697131b7aeeb64e0c4b4c0556842f1cb1b02e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-07soc/intel/skylake: remove PrimaryDisplay checkMaxim Polyakov
Checking the PrimaryDisplay parameter (added by patch with Change Id Ie3f9362676105e41c69139a094dbb9e8b865689f) isn`t required. The display connected to PEG works even if IGD is primary for output image and at the same time this device is disabled Tested on Asrock H110M-DVS with NVIDIA GTX 1060 GPU Payload: tianocore edk2-stable201811-216-g51be9d0 Change-Id: I5615597881a151bb004676d914fbf40874ac1f68 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32615 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07soc/skl/memmap: calculate mem size even if IGD undefined in devtreeMaxim Polyakov
The DRAM base memory should be calculated even if IGD isn`t defined in the board device tree Tested on Asrock H110M-DVS Change-Id: I3da51473e6c06da803bd969a4a6dff792c18f962 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-07intel/fsp1_1: Drop remnants of `pei_data`Nico Huber
`pei_data` was a struct with blob parameters from pre-FSP times. Somehow, it sneaked into upstream FSP1.1 support (probably because early board ports were written for a different blob). When added upstream, its usage was already perverted. It was declared at SoC level but mostly used to pass mainboard data from mainboard code to itself and FSP data from FSP code to itself. Now that no board/ SoC code uses it anymore, we can finally drop it. Change-Id: Ib0bc402703188539cf2254bdc395cca9dd32d863 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-07soc/intel/bsw: Move memory init values into `romstage.h`Nico Huber
`chip.h` is usually used as devicetree interface. Change-Id: Ied30927d68927b86758a84ccf3f5fbd8cce632f1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32592 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07intel/fsp1_1: Move MRC cache pointers into `romstage_params`Nico Huber
These are part of a common concept and not SoC specific. Change-Id: I9cb218d7825bd06a138f7f5d9e2b68e86077a3ec Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-05-07intel/fsp1_1: Drop `boot_mode` from `pei_data`Nico Huber
It was only used locally. Change-Id: Iaaad760e8ceca62655f5448c30846cf11959e8e1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-05-06soc/intel/apollolake: Reset GPI IS & IE registers at ramstageKarthikeyan Ramasubramanian
Reset GPI Interrupt status and enable registers from ramstage instead of bootblock so that it applies to devices in field. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ib11b580ceb23bd1fe789f549b667a8ced2d859a1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32534 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/intel/cannonlake/acpi: Add board level s0ix call backEric Lai
Add board level s0ix call back. Since some driver doesn't care _ON/_OFF method. Add a control method for s0ix usage. BUG=b:129177593 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I404f388b19355ae89b36d1fb07f9fb4f97eb3b2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/32539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-06soc/apollolake: Add ramstage hookFelix Singer
A hook for romstage is already existing but not for ramstage. It's very useful for debugging as it allows to run code for testing purposes by the mainboard. Also, it allows to run configuration code or configure FSP options, which don't have a devicetree option. Change-Id: I9edc543943c5cbc696fc6c615cb77ef68294c980 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06soc/amd/stoneyridge: Correct bugs in lpc.cMarshall Dawson
Remove the bridge enable step of accessing D14F0x64. This method for enabling the bridge appears to be last present in the SB700 device. Beginning in the SB800 (and all FCH, SoC devices), the enable is in PMxEC[0]. Since the bridge is enabled in bootblock to allow port 80h, there is no need to maintain it in ramstage. Correct the device used for misc. configuration of the LPC bridge. The #defined value removed is 14.0 but the settings are in 14.3. TEST=Boot Grunt, check console and dmesg for errors and warnings BUG=b:131862871 Change-Id: I078be974dc3c78c94cb7c0832518f21bac029ff2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-05-06soc/amd/stoneyridge: Move acpi_fill_mcfg to northbridgeMarshall Dawson
Relocate the function to the more appropriate file. Change-Id: I92a3e8d0461ae228f6c01567db159e2458de5f6b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-06Fix code that would trip -Wtype-limitsJulius Werner
This patch fixes up all code that would throw a -Wtype-limits warning. This sometimes involves eliminating unnecessary checks, adding a few odd but harmless casts or just pragma'ing out the warning for a whole file -- I tried to find the path of least resistance. I think the overall benefit of the warning outweighs the occasional weirdness. Change-Id: Iacd37eb1fad388d9db7267ceccb03e6dcf1ad0d2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32537 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/intel/braswell/Makefile.inc: Remove commented-out lineFrans Hendriks
cpu_microcode_bins is commented out. Remove this line. BUG=NA TEST=Portwell PQ7-M107 Change-Id: Ic398d232bea84a765fce940ef876916a873e561f Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32510 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/skylake: Add missing PCH IDsMarius Genheimer
Added IDs for: - H170 - Z170 - Q170 - Q150 - B150 Used documents: - 332690-005EN Tested on Gigabyte GA-Z170N-WIFI Change-Id: If20a2b764afa02785a97948893dbc5b5f60aff60 Signed-off-by: Marius Genheimer <mail@f0wl.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32517 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06mediatek/mt8183: Wait 200us for voltages to settleTristan Shieh
When we increase voltages, it takes 200us for voltages to stablize. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I5f32035693b6084dbe763411c612ae5d1f7c9e48 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-06soc/intel/cannonlake: Add GPIO dual-route support.Tim Wawrzynczak
Select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT in Kconfig BUG=none BRANCH=none TEST=compiles Change-Id: If5f59ea50c13bd1f279637e281468e6d0312dbab Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32486 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/intel/common: Add new PAD_CFG macro.Tim Wawrzynczak
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be configured as GPI, GPIO Driver mode, and SCI interrupt. Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by PAD_CFG_GPI_IRQ_WAKE). BUG=none BRANCH=none TEST=Compiles Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/amd/common: Introduce module_dispatch()Kyösti Mälkki
This change removes all the separate entrypoint dispatch functions as they all share the same pattern. Furthermore, none of the function definitions under vendorcode binaryPI/AGESA.c file have proper declarations, the ones compiler picks up from AGESA.h are for the internal implementations and with sanely organized headerfiles would not be exposed outside the build of AGESA at all. Change-Id: I0b72badc007565740c93b58743cfd048e8b42775 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31485 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-03{soc, southbridge} : Correct typo in commentFrans Hendriks
BUG=N/A TEST=N/A Change-Id: I1b207e0b77bac8860ba7501378297c1f3604141c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32453 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-03sdm845: Add QCLib to RomStage to perform IP initT Michael Turney
CB acts as I/O handler for QCLib (e.g. DDR training data) This interface allows bi-directional data flow between CB and QCLib Tested and working interfaces: DDR Training data QCLib serial console output DDR Information (base & size) limits cfg data TEST=build & run Change-Id: I073186674a1a593547d1ee1d15c7cd4fd8ad5bc1 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-03sdm845: Combine BB with QC-Sec for ROM bootT Michael Turney
TEST=build & run Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-03soc/intel/braswell: add default option to use public FSPMatt DeVillier
The current Braswell FSP 1.1 header in vendorcode/intel, for which there is no publicly available FSP binary, contains silicon init UPDs which are not found in the publicly available header/binary in the FSP Github repo. This prevents new boards from being added which use the public Braswell FSP header/binary. To resolve this, move the UPDs not found in the public header from the soc's chip.c to ramstage.c for the boards which use them. Add a Kconfig option to use the current non-public FSP header and select it for boards which need it (google/cyan variants); set the public FSP option as the default. Use the Kconfig option to set FSP_HEADER_PATH to ensure the correct header is used. Test: build google/cyan and intel/strago using non-public and public FSP header/binaries respectively. Change-Id: I43cf18b98c844175a87b61fdbe4b0b24484e5702 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-02sdm845: Add USB support on cheza platformChandana Kishori Chiluveru
This patch adds code to initialize two USB DWC3.0 controllers and its associated QUSB V2 10nm PHYs to the SDM845 SOC, and uses them to initialize USB3.0 on the cheza mainboard. Synopsis controller initialization and configuration sequences taken from USB 3.0 HPG chapter 2.2 and refer PHY HPG chapter 10.2 for QUSB phy programming. Includes Super speed mode support. TEST=USB keypad and mass-storage device enumeration tested with this patch Change-Id: I475a7757239acb8ef22a4d61afd59b304a7f0acc Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02qualcomm: Add QCLib interface support to common/T Michael Turney
Change-Id: I38d086c379a3c2f54d1603a2fed5b33860f7f4d7 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02sdm845: Select VBOOT_MIGRATE_WORKING_DATA, now requiredT Michael Turney
Change-Id: Idebbbd89de05d949e6f953aa49d8662d64383d1a Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02soc/intel/icelake: Correct the GPE DWx mapping for GPIO groupsSubrata Banik
This implementation corrects the GPE DWx mapping for GPIO groups. The assignments is done in GPIO MISCFG register for all GPIO communities. And configures the which GPIO communities get register as Tier1. Change-Id: I9c306d46e5194944def26c24cdb95f5ebada42b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-05-02soc/intel/icelake: Select FSP_M_XIPSubrata Banik
This patch ports CB:32275 changes from CNL to ICL. Ice Lake require that FSP-M component should be XIP. This change selects FSP_M_XIP so that the right arguments are passed into cbfstool when adding this component. Change-Id: Icc5550f1f94957fa1b28c8bba6fc0efee98e233e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32507 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/icelake: Move power_state functions to pmutil.cSubrata Banik
This patch ports CB:31787 and CB:31908 changes from CNL to ICL. This change moves soc_fill_power_state and soc_prev_sleep_state to pmutil.c. It allows the functions to be used across romstage and smm. Also fix GEN_PMCON bit checks as below: ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A and so this change updates the check for these bits to use GEN_PMCON_A instead of GEN_PMCON_B. Change-Id: Ib7ab95b7bbcc97a076d27a11db2105f7b976b521 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32506 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/{broadwell, skylake}: Remove unused pch_log_state() declarationSubrata Banik
This patch removes unused pch_log_state() function declaration from pch.h because elog.c has static implementation of pch_log_state(). Change-Id: Ib0f3831dc3b60af2ee432a76866e401a51b96fb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32505 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-02soc/intel/icelake: Add chipset event loggingSubrata Banik
This patch ports CB:30718 and CB:31908 changes from CNL to ICL. Add logging of chipset events on boot into the flash event log. This was tested on a google/dragonegg board to ensure that events like "System Reset" are added to the log as expected. Also fix GEN_PMCON bit checks as below: ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A and so this change updates the check for these bits to use GEN_PMCON_A instead of GEN_PMCON_B. Change-Id: I25ec32e81f8801f8d5e69c6095ffed73d75dded6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-05-02soc/intel/icelake: Clear PMCON status bitsSubrata Banik
This patch ports CB:31902 changes from CNL to ICL. The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. Change-Id: Ia07aa17b4491216a277c36edfe6ed2aa489287c6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32503 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-01mb/google/sarien: Disable S5 wake on LAN by defaultEric Lai
Chromebook doesn't require support wake on LAN in S5. Disable it by default for power saving. BUG=b:131571666 TEST= check LAN indicator is off under S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia90c9d2f3ea9b3580e9a7bbfb47c917dd51e3c03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-01soc/intel/common: Set RX_DISABLE for pads configured as NCFurquan Shaikh
For GPIO pads that are configured as no-connect (PAD_NC), setting it as GPI (with Rx enabled) leads to GPE0_STS being set incorrectly. Though this is not an issue in practice (GPE0_EN is not set, so no events triggered), it can confuse users when debugging GPE related issues. This change configures PAD_NC to have Rx disabled along with Tx to ensure that it does not end up setting GPE0_STS bits for unwanted GPIO pads. P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that configuration as is. BUG=b:129235068 TEST=Verified that GPE0_STS bits are not set for pads that are marked as PAD_NC. Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2019-04-30rockchip: rk3399: increase memory for fit payload.Marty E. Plummer
Increase ramstage to 2M, required to actually embed the 7.2mb uImage into the coreboot.rom, increase the postram cbfs cache in order for the fit image to be loadable (without this increase the fit payload is found but not loaded) Change-Id: Iee0ed9f7958588ceda54bb32253c84cac68abea2 Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-30vboot: refactor OPROM codeJoel Kitching
The name OPROM is somewhat inaccurate, since other steps to bring up display and graphics are needed depending on mainboard/SoC. This patch cleans up OPROM code nomenclature, and works towards the goal of deprecating vboot1: * Rename CONFIG_VBOOT_OPROM_MATTERS to CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig description * Remove function vboot_handoff_skip_display_init * Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY * Add |flags| field to vboot_working_data struct * Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild TEST=build and flash eve device; attempt loading dev/rec modes BRANCH=none Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29rockchip/rk3399: Select VBOOT_MIGRATE_WORKING_DATAJulius Werner
Trusted Firmware places some components in SRAM on RK3399 and therefore restricts accesses to SRAM to the secure world. This makes the vboot working data inaccessible to normal world payloads, so we need to migrate it into CBMEM. Change-Id: Ic7c95790f2f118ccbdd897550f13b5f987bdd831 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-04-29mediatek: Add function to raise the CPU frequencyTristan Shieh
Implement mt_pll_raise_ca53_freq() in MT8183 to raise the CPU frequency. Move the function declaration to common header. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: Ide8d767486d68177fa2bfbcc5b559879eca1bcda Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29mediatek/mt8183: Set CPU frequency to 1417MHzTristan Shieh
With the default CPU voltage (0.8v), CPU frequency should be 1417Mhz at most. We have to raise CPU frequency to 1989MHz after increasing CPU voltage to 1.05v in romstage. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I4c3e0fa27ccda8e0efe422b6ab503a1efb1697e9 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29Revert "soc/intel/common/block: add VMX support"Nico Huber
This reverts commit 9aae51ad1141a47d5c2f7133b02f5f0ab6168860. Proper code in cpu/intel/common/ shall be used instead. Change-Id: I4a5d558b03497d106083eece10c5b34e0e7cbb2d Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29683 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29soc/skl: set IGD resources only if device is enabledMaxim Polyakov
If the Intel IGD device pci 02.0 is disabled or undefined in the device tree, then internal graphics pre-allocated memory and GFX-VT MMIO memory for virtualization won`t be allocated in the SoC address space. Thus, patch resolves the FSP-S hang problem on Skylake/ Kaby Lake processors when the IGD device is disabled. This should provide to run FSP 2.0-based coreboot on these CPUs families without integrated graphics card. The following boards were used for testing: - Asrock H110M-DVS board (desktop i5-6600) & NVIDIA GTX 1060 as external GPU. Virtualization and GFX 3D acceleration with nouveau driver still works well (tested on VirtualBox 5.1.38 with Ubuntu 18.04.1 as guest and host OS) - Intel KBL-R U RVP board (mobile i5-8350u) without GFX. Payload: tianocore edk2-stable201811-216-g51be9d0. Change-Id: Id7a0cba582d83e3fe7e8d20342ee219cdd369a53 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32467 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mediatek/mt8183: Init audio related clockJiaxin Yu
Enable audio clock, intbus clock, infra clock and mtkaif 26m clock.Needed by audio playback in firmware. BUG=b:117254418 BRANCH=none TEST=Build pass and verified on kukui p1 board Change-Id: I88060d9796cc23ad7f524943f36869e1ec85073d Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-29soc/intel/apollolake/bootblock: Clear the GPI IS & IE registersKarthikeyan Ramasubramanian
Clear the GPI Interrupt Status & Enable registers to prevent any interrupt storms due to GPI. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ia3b9d3bf08472219348e20b53bae470c589039fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel/common: Add support to clear GPI IS & IE registersKarthikeyan Ramasubramanian
Add support to reset the GPI Interrupt Status & Enable registers so that the system does not experience any interrupt storm from a GPI when it comes out of one of the sleep states. BUG=b:130593883 BRANCH=None TEST=Ensure that the Interrupt status & enable registers are reset during the boot up. Ensure that the system boots fine to ChromeOS. Change-Id: I99f36d88cbab8bb75f12ab1a4d06437f837841cb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel: Add GPI interrupt config register offset infoKarthikeyan Ramasubramanian
Add the offset information for GPI interrupt status and enable register in the pad_community structure. Populate the concerned information for individual SoCs. This offset information is required to clear the interrupt configuration during the bootup. BUG=b:130593883 BRANCH=None TEST=Ensure that the interrupt configuration are cleared during bootup. Ensured that the system boots to ChromeOS. Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel/braswell: Move LPE ACPI code to mainboardFrans Hendriks
The ACPI code of LPE device is included regardless of the availability of the LPE controller. Linux remains requesting the status of device LPEA even if this device is disabled. Include ACPI LPE controller code at Braswell mainboards with LPE enabled. BUG=N/A TEST=Linux 4.17+ on Portwell PQ7-M107 Change-Id: Ic8acf9ea9e9b0ba9b272e20beb2023b7a4716a73 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-04-29soc/intel/cannonlake: Modify dq_map to provide for 6 entriesPaul Fagerburg
Intel's DQ_DQS_RComp_Info_Utility generates data for 6 entries. MRC will return errors if we don't have all 6 entries in the map. BRANCH=none BUG=b:131103736 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Change-Id: I20a768de0e4440d7dde7b717794c4e2d0c62819c Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-26soc/intel/apl/acpi: Do not report 8259 PICsNico Huber
The IRQ tables don't support this path, so we shouldn't report presence of the legacy PICs. As the _PIC method is optional and we ignore the passed parameter anyway, drop it. Change-Id: I51301a600e16f74fde00fdcb4595e1f47a52e207 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-04-26soc/{amd,intel}/chip: Use local include for chip.hElyes HAOUAS
Change-Id: Ic1fcbf4b54b7d0b5cda04ca9f7fc145050c867b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-26soc/amd/stoneyridge: Generate MCFG tableRaul E Rangel
BUG=crbug:948241 TEST=Booted and decompiled the table [000h 0000 4] Signature : "MCFG" [004h 0004 4] Table Length : 0000003C [008h 0008 1] Revision : 01 [009h 0009 1] Checksum : 15 [00Ah 0010 6] Oem ID : "COREv4" [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" [020h 0032 4] Asl Compiler Revision : 00000000 [024h 0036 8] Reserved : 0000000000000000 [02Ch 0044 8] Base Address : 00000000F8000000 [034h 0052 2] Segment Group Number : 0000 [036h 0054 1] Start Bus Number : 00 [037h 0055 1] End Bus Number : 40 [038h 0056 4] Reserved : 00000000 Change-Id: I46dc1959971af4685a7ffd285429175d6882ae86 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-04-25cpu/intel/car/non-evict: Select NO_FIXED_XIP_ROM_SIZEArthur Heymans
CPU's featuring a non eviction mode cache the whole ROM. Therefore XIP stages don't need to follow some alignment constraints. Change-Id: I4a30f31baa0f90279c0690ceb6aefea6de461bd9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-25soc/cavium/common/bootblock: Remove unused variablesElyes HAOUAS
Change-Id: I4835ca3e20f2e53598bfc77b633aca946d3fde9c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-04-25src/soc/intel: Remove unused variablesElyes HAOUAS
Change-Id: Ie81377a31e6527c5fd5aaea99f08527912e870a0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-04-253rdparty/fsp: Update submodule pointer to upstream masterMatt DeVillier
Update submodule pointer to pull in newly-updated Braswell FSP. Adjust FSP_FD_PATH for soc/cannonlake due to filename case change. Change-Id: I02ee0d32fd4c04cd4971eff20fc5a7de3f9b07ec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-24mediatek/mt8183: Set CPU frequency to 1989MHzTristan Shieh
Set CPU frequency from 1100MHz to 1989MHz to improve booting time. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: Id41c7ea8905c4db2537a5c32f96eb7c6b2c008ea Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32397 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mediatek/mt8183: Set processor voltage to 1.05vTristan Shieh
The maximum CPU frequency is 1417MHz with current processor voltage (0.8v). Set processor voltage to 1.05v for higher CPU frequency. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I24ecdac2c85d3f012d9235449c0d727d727dc185 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-23soc/qualcomm/qcs405: add console.h includePatrick Georgi
Change-Id: I556d00e8b06f631a5ca51ae2b5ba646e5f536480 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32422 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23qcs405: Add support of GPIO IRQ APIsTaniya Das
Add support of GPIO IRQ APIs. Change-Id: I11715a93999012622a5e28455731cbe249ba8f2c Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-23qcs405: clock: Update SPI APITaniya Das
Update SPI enable/disable and configure clock API for supporting all the blsp and qup for qcs405. Change-Id: I39622571cb671f62312283a010129ceecb654f61 Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-23soc/intel/cannonlake: add missing console.h includePatrick Georgi
Change-Id: Ic23eb57a4096d4301d7f9478d8e65aaeb233de7b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32399 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-04-23soc/intel/common/acpi: Add dynamic method around sleepLijian Zhao
Declare plaform level hook method before and after system sleep for possible power management related usage. BUG=N/A TEST=pass with make what-jenkins-does Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ie63711748b6dbb99d34910824f2059464543e162 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32366 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/amd/common: Remove AmdReadEventLog()Kyösti Mälkki
Parameter passing is incorrect here, it should pass complete StdHeader instead of attempting to fill in HeapStatus that should be treated as a field private to AGESA, based on where it is defined in the header files. Furthermore the while() loop did not evaluate the return value. Feature can be brought back at a later date after someone verifies it actually works correctly across different stages. Change-Id: Ib243b275f8700ecaeb330772c795d305c61899c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31484 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/amd/common: Introduce agesa_execute_state()Kyösti Mälkki
Each entrypoint to AGESA goes through the same sequence and have same the function signature. To avoid introducing bunch of preprocessor magic, rename all the agesawrapper_amdXXX() functions that are actual entrypoints to AGESA API, make them static, and provide a single exposed entry function agesa_execute_state(). Change-Id: I96ae1874132da3843aa42c2f4e8a59ec771d3893 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31483 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/cannonlake: Enable PlatformDebugConsent by KconfigKane Chen
This change is mainly to control PlatformDebugConsent FSP UPD. PlatformDebugConsent is enabled if SOC_INTEL_CANNONLAKE_DEBUG_CONSENT != 0. PlatformDebugConsent in FspmUpd.h has the details. BUG=b:130203864 TEST=boot ok and PlatformDebugConsent can be controlled by Kconfig Change-Id: Ib845b5e42bc78fb352a0c97c6301f2aeca522f29 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32297 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/common: Add SOC_INTEL_DEBUG_CONSENT to control debug interfaceKane Chen
SOC_INTEL_DEBUG_CONSENT config is generally to enable default debug interface of SoC. Ex: USB DBC, DCI debug interface on cnl, whl, cml. Change-Id: I313d80d6c63fd37164c63f78e9e69d3cb4a5566b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/braswell/acpi/lpss.asl: Remove SPI1 and PWM asl codeFrans Hendriks
Linux remains using SPI1 and PWM ASL even if these devices are disabled. SPI1 and PWM are disabled by Intel FSP. Remove ASL code. BUG=N/A TEST=Boot Ubuntu on Intel CherryHill CRB Change-Id: Iec2ca7520081d00bf7a53d58ee054aa6f23e5606 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-04-23soc/intel/cannonlake: Add null reference check for Cnvi and XdciAamir Bohra
Change-Id: I2e1011d9ac93ed764b6c2aa425928a972ec2aa43 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32322 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-23Klocwork: Fix the Null pointer derefernce found by klocworkThejaswani Putta
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I15973ac28e9645826986cf63d2160eedb83024e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32290 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-22Revert "soc/intel/cannonlake: Enable coreboot MP PPI service for WHL/CML"Lijian Zhao
This reverts commit 41dad286d846819242a84fc65faed2bbb35845ac. The change will make s0ix fail on Sarien/Arcada Platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I169bc6f41fba82fcf515267e8e1d08aa5ee2dce4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32391 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 05:59:42 +0000