summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2014-05-06baytrail: include mainboard's superio.aslAaron Durbin
The mainboard needs an opportunity to hang devices off of the LPC device. Therefore, provide this opportunity for the mainboard. BUG=chrome-os-partner:23505 BRANCH=None TEST=Buit and booted with keyboard. Keys work. Change-Id: Ie2b660ad43e86d9237b0b0bb0720b069670bc537 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176133 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4949 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add more irq defintionsAaron Durbin
The IRQs used for devices that are in acpi mode are added as well as the IRQ defitions for the dedicated GPIO IRQ routing. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built. Change-Id: I2eed5a4584e2d908c32617c9289a2abeaa30bd44 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176120 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4947 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
Baytrail has a configurable SCI irq. Add support for properly configuring SCI irq. Note that it is currently fixed to IRQ9, but the code supports setting it to the other supported values. The current mainboards using baytrail defer the madt IRQ override information to the chipset. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Noted 'SCI is IRQ9' message. Change-Id: I7b307bd58f9de944f0cb4c116107a15345499f2e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176075 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4946 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add support for S3 resumeAaron Durbin
Previously the only path through memory init and coreboot was hardcoding S5. Therefore all S3 paths would not be taken. Allow for S3 resume to work by enabling the proper control paths in romstage. BUG=chrome-os-partner:22867 BRANCH=None TEST=While in kernel 'echo mem > /sys/power/state'. Board went into S3. Power button press resumed back into kernel. Change-Id: I3cbae73223f0d71c74eb3d6b7c25d1b32318ab3e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175940 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4943 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-05baytrail: fix up FADTAaron Durbin
The FADT for baytrail had incorrect offsets leading to the kernel spewing a huge mess of ACPI errors. Fix these offsets to be initialized in the chipset code. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted into kernel on rambi. Login screen comes up. Change-Id: I89fc2a4fd800ff01cedf89b51cfb1369aceb9f03 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175663 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4941 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05baytrail: interrupt routing supportAaron Durbin
This provides the initial support for interrupt routing in bay trail. It includes both acpi changes and board changes to ensure the interdependencies are met with the current ASL code. The PIRQ routing is handled by the mainboard exporting an irqroute.h header that describes the per device and PIRQ PCI settings. There are still a lot of ACPI errors in the kernel with this change, though. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted rambi into kernel. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e Reviewed-on: https://chromium-review.googlesource.com/175700 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4940 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-30baytrail: Add default _OSC methodDuncan Laurie
This is needed to let the kernel know it can control everything and not to disable features. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I40ff15bb931a9be7c31509ec84489083b5af0a82 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175629 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4939 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add root bus resource regionsDuncan Laurie
Populate the PCI mmio region from NVS TOLM variable. Other regions are fixed. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Iec8352b0464ad850a76bd1706c028628c477731d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175628 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4938 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add MCFG table to ACPIDuncan Laurie
This adds the PCI configuration region table to baytrail. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I0d975709a4a18d0f1c5e24581c9fd2190fe2996b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175627 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4937 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
There is a lot of NVS allocated to things that are not really used. Most of these are removed and some are moved around. Thermals are expected to be handled with DPTF so I've removed that bit of code but have not yet cleaned up the thermal zone. I left in the SIO BARs since I think we will need those still even though they may need work still. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Id16ee67e6b3709a303c001afd72947147f938127 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175626 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4936 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add function to read top of low memoryDuncan Laurie
The top of low memory is also the start of the region where PCIe resources are allocated. This needs to be passed in ACPI but is only readable from IOSF. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Iad95335f72dc3e35b837bedb8d52d388c861a330 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4935 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
Add a length define for all the reserved MMIO regions and use them in the ACPI code to reserve the regions there. Add a region for the "abort page" documented in the EDS. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I2060dca0636a2fdc0533ddd0826f94add2c272c3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175624 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4934 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
- a few clock gating bits were set improperly and were preventing the system from transitioning out of S0 state. - the XHCC registers were not getting the top byte set properly which includes things like DMA write request size and request boundary crossing control. This was causing memory corruption. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot kernel from USB on rambi with XHCI driver Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4933 Tested-by: build bot (Jenkins)
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
This gives us completely transparent low-level function to transmit data. Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5336 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-03-20rmodules: use rmodtool to create rmodulesAaron Durbin
Start using the rmodtool for generating rmodules. rmodule_link() has been changed to create 2 rules: one for the passed in <name>, the other for creating <name>.rmod which is an ELF file in the format of an rmodule. Since the header is not compiled and linked together with an rmodule there needs to be a way of marking which symbol is the entry point. __rmodule_entry is the symbol used for knowing the entry point. There was a little churn in SMM modules to ensure an rmodule entry point symbol takes a single argument. Change-Id: Ie452ed866f6596bf13f137f5b832faa39f48d26e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5379 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-03-11baytrail: Reserve memory between ASEG and 1MB and for ramoopsDuncan Laurie
Low system tables are in this region, and it is probably safer to keep ASEG reserved. Also keep the region used by ramoops from being used by the OS and from being cleared by developer mode boots. Lots more work needed to make the ACPI tables fully functional. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=boot on rambi and see that the kernel finds RSDP and uses ACPI Change-Id: I4f7064d3cff14a3ecf15b194a1f20c1fa9d5e134 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4932 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-11baytrail: Add EHCI initializationDuncan Laurie
This adds required steps to initialize the EHCI controller on the baytrail platform. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot from USB on rambi Change-Id: I3a5487791e2305616036d4550e260a178c0e1c4d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175512 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4930 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-11baytrail: Add XHCI initializationDuncan Laurie
This adds required steps to initialize the XHCI controller on the baytrail platform. Actually using XHCI is causing lots of bad behavior including apparent memory corruption. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot on rambi Change-Id: Ic43e04f4b47e107ec3bb0c387a9fc72c3cae0271 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175511 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4929 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-11baytrail: add audio clock workaround for LPEAaron Durbin
Apparently the LPE device needs a 25MHz clock. Provide the work around to enable this clock. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Confirmed setting being applied. Change-Id: Ibff5563436b3025eb8b61ffee3302bd2da872b39 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175493 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4928 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-11baytrail: add ccu iosf access functionsAaron Durbin
The clock control unit needs to be accessed to configure some of the devices properly. Therefore. provide a way to access the CCU. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built. Change-Id: I30ed06e6aef81ee99c6d7ab3cbe8f83818b8dee5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175492 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4927 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-11baytrail: HDA function disable workaroundAaron Durbin
Parts of the audio path are common between the HDA and LPE. However, those parts are power-controlled by the D-state of the HDA device. Therefore, one cannot put the HDA into D3Hot because those audio paths will be shutdown. BUG=chrome-os-partner:22871 BRANCH=None TEST=Built and booted through depthcharge. Disabling HDA still causes a shutdown when performing warm reset, however I was able to verify the magic sequence was being performed. Change-Id: I3b01356d85a4b7b902bd896b8eb9e7bc509fcc42 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175491 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4926 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-11baytrail: allow function disable on TXEAaron Durbin
Previously it was not known how to put the TXE pci device into D3Hot. It's been disseminated that this is not a requirement for disabling the TXE pci device in the function disable register. Therefore, allow this by returning 0 from place_device_in_d3hot(). BUG=chrome-os-partner:22871 BRANCH=None TEST=Temporarily set TXE to be disabled. Noted FUNC_DIS was being set accordingly. Change-Id: Ibf537bf8ba718859591dc89bdf41e57c1ea9d836 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175490 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4925 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-11baytrail: Switch graphics init to use reg_scriptDuncan Laurie
This is an example consumer of the register script handler. BUG=chrome-os-partner:23507 BRANCH=rambi TEST=build and boot on rambi and see recovery screen Change-Id: I4954a5defd0a345b179819b9f6bb15ea340a6715 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175214 Commit-Queue: Aaron Durbin <adurbin@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4924 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-27baytrail: use common code for iosf accessorsAaron Durbin
The same sequence is used regardless of the port being read or written. Therefore, use the same implementation for reading or writing to a port. BUG=None BRANCH=None TEST=Built and booted through depthcharge. Dev and recovery screens still work. Nothing bizarre in console output. Change-Id: I1a64b54b50472fa7d601e199653eb4a76accf910 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175441 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4922 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: add lpss iosf functions and regsAaron Durbin
The low power subsystem devices have a lot of their configuration done in the IOSF sideband message space. Add support for these access methods. BUG=chrome-os-partner:23790 BRANCH=None TEST=Built and booted through depthcharge. Change-Id: I0dd52b952a16ef1280c29301164db041ee87f636 Signed-off-by: Aaron Durbin <adurbin@chromum.org> Reviewed-on: https://chromium-review.googlesource.com/175440 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4921 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: Fix EHCI function number and XHCI typoDuncan Laurie
BUG=chrome-os-partner:23635 BRANCH=rambi TEST=successfully disable EHCI controller in devicetree.cb Change-Id: I8a22e25a9f7c263d2a6debf0cd1606cb0f6f7645 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175403 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4920 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: increment boot count for elogAaron Durbin
The elog boot counter in cmos was not being initialized nor incremented. Start doing that in romstage. Since S3 resume is not detected yet the increment is unconditional. BUG=None BRANCH=None TEST=Built and booted through depthcharge multiple times. Noted output such as 'Boot Count incremented to 4'. Change-Id: Ic585d4ad4b3af086e0067e28fe0f35c02979bbd2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174717 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4919 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: add GNVS to cbmem and set acpi_slp_typeAaron Durbin
The ACPI code was previously complaining about not being able to find the GNVS area: 'ACPI: Could not find CBMEM GNVS'. Fix this by adding GNVS area early in start up. This is also the appropriate place to set the acpi_slp_type variable to indicate an S3 resume or not. BUG=chrome-os-partner:22867 BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted through depthcharge. Noted cbmem has 'ACPI GNVS' entry. Change-Id: Ifbca3dd390ebe573730ee204ca4c2f19626dd6b1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174647 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4918 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: fix uninitialized acpi structuresAaron Durbin
The callers of the following functions assume the storage area provided by the pointers is initialized. That's not the case as these were just place holders. - void acpi_create_intel_hpet(acpi_hpet_t * hpet); - void acpi_create_serialio_ssdt(acpi_header_t *ssdt); To fix this properly initialize the hpet entry, and just remove the serialio_ssdt function entirely. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted through depthcharge on rambi. Noted no more ACPI errors relating to invalid length. Change-Id: If56ab033562ef2d755e9c9de42f507c95d291aba Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174716 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4917 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27baytrail: Add IOSF functions for USBPHY and USHPHYDuncan Laurie
These are needed for USB2 and USB3 PHY init sequences. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=emerge-rambi chromeos-coreboot-rambi Change-Id: Id284d882034e15eceeaa910b8b73bc0d8d895199 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4916 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27rambi: Enable internal keyboardDuncan Laurie
The EC LPC init function needs to run to enable the internal keyboard. I needed this to confirm that it is just USB keyboards that are causing all sorts of issues. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=boot to recovery screen and hit tab Change-Id: Iea0fc66ba62ea7da71ef83c26e25ae32bef102bd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175207 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4915 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: Add SATA driverShawn Nematbakhsh
Add SATA driver for baytrail platform. BUG=chrome-os-partner:23643 TEST=Manual, in dev mode. Verify on rambi that SATA disk is detected, and kernel is found + booted. Change-Id: I5c13e03203c8f26d233c7d10af8ff6812c460578 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174914 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4913 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: add support for disabling south cluster pci devicesAaron Durbin
When the southcluster pci devices are listed in the devicetree add the ability to perform the proper disabling sequence for turning off devices. This only turns off the pci device interface as well as put the device into D3Hot. It is not yet known how to put the TXE device into D3Hot so it's currently not possible to disable that device. Also, expose the southcluster_enable_dev() function so that other devices can call this if they require doing specific things before disabling the device. The southcluster_enable_dev() is only called on devices found in the devicetree and if they currently have no ops associated with them. BUG=chrome-os-partner:22871 BRANCH=None TEST=Built and booted through depthcharge. Interrogated output to ensure devices were being properly disabled. Change-Id: I537ddcb9379907af2fe012948542b6150a8bf7c5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174644 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4911 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27baytrail: use MCRX in iosf access functionsAaron Durbin
While most registers accesses don't need the use of the MCRX register (upper 24 bits of address) the MCRX register should be protected. The reference code could be doing accesses to registers that initialized the MCRX register. Thus, any access after that should ensure the MCRX register is initialized appropriately. BUG=None BRANCH=None TEST=Verified assembly output. Also, built and booted through depthcharge. Change-Id: I4d6cfbe6bb1666790c69778b8f2c8baeaf015264 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174643 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
With the recent improvement 3d6ffe76f8a505c2dff5d5c6146da3d63dad6e82, speedup by CACHE_ROM is reduced a lot. On the other hand this makes coreboot run out of MTRRs depending on system configuration, hence screwing up I/O access and cache coherency in worst cases. CACHE_ROM requires the user to sanity check their boot output because the feature is brittle. The working configuration is dependent on I/O hole size, ram size, and chipset. Because of this the current implementation can leave a system configured in an inconsistent state leading to unexpected results such as poor performance and/or inconsistent cache-coherency Remove this as a buggy feature until we figure out how to do it properly if necessary. Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5146 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-24baytrail: Enable GFX deviceDuncan Laurie
- Ungate display in PUNIT - Set GSM to 64MB since 32MB is not supported in <C0 stepping - Initialize power management registers in GTT - Execute VBIOS if found BUG=chrome-os-partner:23507 BRANCH=rambi TEST=build and boot to dev screen via HDMI on rambi Change-Id: Idb032c7ea7f16b651b4c921e3429a652fe663a5d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174922 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4907 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: IOSF write functions need to set data before controlDuncan Laurie
The data needs to be available in the register before the control bits are set to make the write happen. BUG=chrome-os-partner:23507 BRANCH=rambi TEST=successfully ungate power on PUNIT on rambi Change-Id: I8fae60d5385ce9a401c1dec9cbb39b70d157a6c2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174898 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4906 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: initialize chromeos EC if present in romstageAaron Durbin
The EC needs to be initialized early in romstage. Therefore perform the call after console has been initialized in order to view any messages that the code may spit out. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted with recovery mode and EC in RW. Noted that system reboots the EC. Change-Id: I35aa3ea4aa3dbd9bd806b6498e227f45ceebd7a1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174713 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4904 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: use version 2 of efi wrapperAaron Durbin
Version 2 of the efi wrapper wants the speed of the TSC timer initialized in the parameter structure. BUG=chrome-os-partner:22866 BRANCH=None TEST=Built and booted through depthcharge. No errors spit out by wrapper. CQ-DEPEND=CL:*147256 Change-Id: I9cd265ea6bde93be85fc6fbc905d83af57fc2773 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174712 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4903 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: remove gfx read_resources() work aroundAaron Durbin
Before the special PUNIT settings the GFX pci device had the same device id as the transaction router. This required a special case in the transaction router's driver to do the proper thing for read_resources(). However, that requirement is no longer needed as the PUNIT special message is now being done. Therefore, remove the work around. BUG=None BRANCH=None TEST=Built and looked at resource allocation logs to confirm work around is no longer needed. Change-Id: I90b155cb5560ca3291f146c2f586456e5529f6b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174652 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4902 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: get rid of global microcode_ptrAaron Durbin
A global microcode_ptr was added when doing the MP development work. However, this is unnecessary as the pattrs structure already contains the pointer. Use that instead. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted. Microcode still being loaded correctly. Change-Id: I0abba66fc7741699411d14bd3e1bb28cf1618028 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174552 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4901 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: add microcode version 319Aaron Durbin
Update microcode version to 319. BUG=None BRANCH=None TEST=Built and booted. Noted 319 being used. Change-Id: I008f90a1c6b542d979e34da22e9f375224c0ffeb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174551 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4900 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-17baytrail: add support to run reference code blobAaron Durbin
The reference code blob is needed to bootstrap certain pieces of hardware in bay trail. Provide the ability to run reference code by loading the reference code as an rmodule. Note that support for vboot verification and S3 resume is omitted from this commit. BUG=chrome-os-partner:22866 BRANCH=None TEST=Built and booted with refcode loading. Change-Id: I30334db441a57f4d87b4de6fca0a9a48e1c05c05 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174426 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4898 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17baytrail: add south cluster fixed resourcesAaron Durbin
The PCU (platform controller unit) contains the resources and IP blocks that used to reside in the south bridge. Bay Trail has since renamed it south cluster. There are quite a few fixed MMIO and I/O resources. If these aren't added the resource allocator will freely assign these addresses which causes conflicts and other subtle bugs. BUG=chrome-os-partner:23544 BUG=chrome-os-partner:23545 BRANCH=None TEST=Built and booted through depthcharge. Verified resource allocation not weird. And no more depthcharge crashes. Change-Id: I697fbda4538c03fded293bcb63a5823b1ed150ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174421 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4893 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17baytrail: enable monotonic timerAaron Durbin
Enabling the monotonic timer allows for collecting boot stage times as well as each device initialization time. BUG=chrome-os-partner:23166 BRANCH=None TEST=Built and booted. Noted timings in console output. Change-Id: I5fdc703ea21710fd26de352f367c6fc0c767ab6a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174422 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4894 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-16baytrail: SMM supportAaron Durbin
Initialize SMM on all CPUs by relocating the SMM region and setting SMRR on all the cores. Additionally SMI is enabled in the south cluster. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted rambi. Tested with DEBUG_SMI and noted power button turns off board while in firmware. Change-Id: I92e3460572feeb67d4a3d4d26af5f0ecaf7d3dd5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173983 Reviewed-on: http://review.coreboot.org/4892 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-16baytrail: bring up APsAaron Durbin
Bring up the APs using x86 MP infrastructure. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted rambi. Noted all cores are brought up. Change-Id: I9231eff5494444e8eb17ecdc5a0af72a2e5208b5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173704 Reviewed-on: http://review.coreboot.org/4889 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16baytrail: Modify GPIO pull-up specification methodShawn Nematbakhsh
Minor style changes to the way GPIO pull-ups are specified in board-specific GPIO maps. Intent is to allow calls to GPIO_FUNC macro from such maps. BUG=chrome-os-partner:22863 TEST=Manual. Build + boot on bayleybay. Change-Id: I80134b65d22d3ad8a049837dccc0985e321645da Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: David James <davidjames@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4886 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16baytrail: correct MMC pci locationAaron Durbin
The original documentation was incorrect. Fix the pci device for the MMC port to reflect reality. MMC is at 00:17.0 with a device id of 0x0f50. BUG=None BRANCH=None TEST=Built. Change-Id: Ic18665b7dda5f386e72d1a5255e4e57d5b631eb0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172772 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4884 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16baytrail: fix tsc rateAaron Durbin
Despite some references to a fixed bclk in some of the docs the bclk is variable per sku. Therefore, perform the calculation according to the BSEL_CR_OVERCLOCK_CONTROL msr which provides the bclk for the cpu cores in Bay Trail. BUG=chrome-os-partner:23166 BRANCH=None TEST=Built and booted B3. correctly says: clocks_per_usec: 2133 Change-Id: I55da45d42e7672fdb3b821c8aed7340a6f73dd08 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172771 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4883 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-15coreboot: infrastructure for different ramstage loadersAaron Durbin
There are 2 methods currently available in coreboot to load ramstage from romstage: cbfs and vboot. The vboot path had to be explicitly enabled and code needed to be added to each chipset to support both. Additionally, many of the paths were duplicated between the two. An additional complication is the presence of having a relocatable ramstage which creates another path with duplication. To rectify this situation provide a common API through the use of a callback to load the ramstage. The rest of the existing logic to handle all the various cases is put in a common place. Change-Id: I5268ce70686cc0d121161a775c3a86ea38a4d8ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5087 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-13baytrail: print dram configurationAaron Durbin
After running the MRC blob print out some information on the training: MRC version, number channels, DDR3 type, and DRAM frequency. Example output: MRC v0.90 2 channels of DDR3 @ 1066MHz Apparently there are two dunit IOSF ports -- 1 for each channel. However, certain registers really on live in channel 0. Thus, there was some changes to dunit support in the iosf area. BUG=chrome-os-partner:22875 BRANCH=None TEST=Built and booted bayleybay in different configs. Change-Id: Ib306432b55f9222b4eb3d14b2467bc0e7617e24f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172770 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4882 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13baytrail: allow downstream use of SSE instructionsAaron Durbin
If a payload is compiled to use SSE instructions it will fault with an undefined opcode because SSE instructions weren't enabled. Therefore enable SSE instructions at runtime. BUG=chrome-os-partner:22991 BRANCH=None TEST=Built and booted with SSE enabled payload. No exceptions seen. Change-Id: I919c1ad319c6ce8befec5b4b1fd8c6343d51ccc1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172642 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4881 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13baytrail: add vboot ramstage verificationAaron Durbin
Add suport for verifying the ramstage with vboot during romstage execution. Along with this support select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to cache the relocated ramstage 1MiB below the top end of the TSEG region. BUG=chrome-os-partner:23249 BRANCH=None TEST=Built and booted with CONFIG_VBOOT_VERIFY_FIRMWARE=y selected. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I355f62469bdcca62b0a4468100effab0342dc8fc Reviewed-on: https://chromium-review.googlesource.com/172712 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4880 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-12baytrail: gpio: add configs for PU/PD functional pinsShawn Nematbakhsh
Pull-ups and pull-downs can be active on functional pins. Add configs for these options so they can be specified on board GPIO maps. TEST=Manual on bayleybay. Verify that platform boots to payload load. BUG=chrome-os-partner:22863 Change-Id: Ie4f77d8ce812f086cc8fe5a6bfcac59669f56f92 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172766 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5209 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: add reset supportAaron Durbin
Bay Trail has the following types of resets it supports: - Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92 - Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9 - Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9 - Warm reset (PMC_PLTRST# assertion) - write 0x6 to I/O 0xcf9 - Global reset (S0->S5->S0 with TXE reset) - write 0x6 or 0xe to 0xcf9 but with ETR[20] set. While these are documented this support currently provides support for 2nd soft reset as well as cold and warm reset. BUG=chrome-os-partner:23249 BRANCH=None TEST=Built and booted. Change-Id: I9746e7c8aed0ffc29e7afa137798e38c5da9c888 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172710 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4878 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11rambi: Add ncore GPIO config tablesShawn Nematbakhsh
gpncore config tables were previously missing -- add them. Also, make the baytrail GPIO/PAD LUTs easier to read. TEST=Manual. Build + boot on bayleybay. BUG=chrome-os-partner:22865 Change-Id: I49a1b23c7ad4fb5f4c86618e8c78ea9a1a42f79d Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172510 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11baytrail: move early init to before mainboardAaron Durbin
It's helpful to have a lot of the early init happen before the handoff to mainboard. One example of this need is having the BARs programmed so that the mainboard can read board-specific gpios. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built. Booted and saw console outout in bayleybay mainboard. Signed-off-by; Aaron Durbin <adurbin@chromium.org> Change-Id: I030d7b4f9061ad7501049e8e204ea12255061fbe Reviewed-on: https://chromium-review.googlesource.com/172290 Tested-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4871 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: Add functions to peek at GPIO input valuesShawn Nematbakhsh
- Add functions to peek at GPIO input pad values (need to be used from romstage for board ram_id GPIOs) - Modify UART GPIOs to use existing fn-assignment function TEST=Manual. Add debug print and verify that GPIO functions return input values. Also, verify UART still functions in romstage. BUG=chrome-os-partner:22865 Change-Id: Ib2e57631c127a592cfa20ab6e2184822424e9d77 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172189 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4870 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: set max frequency early in romstageAaron Durbin
Set the BSP to operate at max frequency early in romstage. The call to punit_init() is when the frequency actually ramps as that makes the punit actually start working. BUG=chrome-os-partner:22857 BRANCH=None TEST=Built and booted. Noted operating frequency status is max. Change-Id: Icfd9e5c7682aa21fc740bd687607ca6a66597d5e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172131 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4869 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: adjust cache policy during romstageAaron Durbin
The caching policy for romstage was previously using a 32KiB of cache-as-ram for both the MRC wrapper and the romstage stack/data. It also used a 32KiB code cache region. The BWG's limitations for the code and data region before memory is up was wrong. It consists of a 16-way set associative 1MiB cache. As long as enough addresses are not read there isn't a risk of evicting the data/stack. Now create a 64KiB cache-as-ram region split evenly between romstage and the MRC wrapper. Additionally cache the memory just below 4GiB in CBFS size. This will cover any code and read-only data needed. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and booted quickly with corresponding changes to MRC warpper. CQ-DEPEND=CL:*146175 Change-Id: I021cecb886a9c0622005edc389136d22905d4520 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172150 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4868 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-11baytrail: add punit access functionsAaron Durbin
Like the bunit and dunit, add the punit accessor functions. BUG=chrome-os-partner:23085 BRANCH=None TEST=Built. Change-Id: Ifd7184dfca8c0491c107bc1c562ea1ded444e372 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171931 Reviewed-on: http://review.coreboot.org/4867 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11baytrail: make default GPIO configs closer to power-on defaultsShawn Nematbakhsh
- Set config0 defaults for hysteresis disable, pad bypass, etc. - Set config1 power-on defaults. - Set pad_val for input as default. BUG=chrome-os-partner:22863 TEST=Manual. Enable GPIO_DEBUG and verify pad registers are set according to expectation. Also verify bayleybay still boots to payload loading. Change-Id: I0f1c9e4d4f39c5c56d7e14a82eb4825612e19420 Reviewed-on: https://chromium-review.googlesource.com/171903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4866 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-05baytrail: initialize punitAaron Durbin
The punit is responsible for a number of things. Without performing the sequence included it won't change processor frequency when requested and apparently there are some bizarre hangs introduced if this sequence isn't included either. Lastly, this needs to come after microcode has been loaded. As that is done in bootblock the ordering is correct. One other side effect is that this fixes the graphics devices' device id. Before it was showing up as the same device id of the SoC transaction router. BUG=chrome-os-partner:22880 BUG=chrome-os-partner:23085 BUG=chrome-os-partner:22876 BRANCH=None TEST=Built and booted. Change-Id: Ib7be1d4b365e9a45647c778ee5f91de497c55bf1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171862 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: load microcode in bootblockAaron Durbin
Start loading microcode in the bootblock. This way no caching has been set up and cache-as-ram mode will be running in a validated configruation (with ucode patch). BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and booted. Confirmed microcode is loaded. Change-Id: I6fd1d8e55bcc9d799b11d9faed771ac50dc120a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171861 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4863 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: disable tco timerAaron Durbin
The TCO timer always starts ticking out of reset. However, depending on microcode loading and punit initialization the TCO timing out has a different impact on the sytem. Without loading microcode or initializing the punit the tco times out and nothing happens. However, when microcode is loaded a timeout will reset the system. Lastly, if the punit is initialized but the microcode isn't loaded the TCO timeout will shut down the system. To fix all the weird symptoms disable the TCO. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and booted with microcode loading. Reset doesn't occur. Change-Id: I49cd62f510726a96bf734ae728a352c671d1561e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171860 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4862 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: program PUNIT memory-mapped base addressAaron Durbin
Apparently there was another BAR living at 0x5c in the LPC bridge that mapped the PUNIT registers. EDS 2.0 released and this register is now documented. BUG=chrome-os-partner:23085 BRANCH=None TEST=Built and booted. Change-Id: I5892c2a14923b57826060e92b4335cb1952ea057 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171612 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4861 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: add 316 microcodeAaron Durbin
The 316 microcode is the newest version. Include that in the build. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built and partially booted with microcode loading. Noted 316 loaded. Change-Id: Iba01dd58688737ae38bc58a84014ee9526540db1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171611 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4860 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: additional iosf changesAaron Durbin
Allow for one to write an individual byte of a 32-bit register when sending a read/write through the IOSF messaging system. Add PUNIT registers and fields for early sequencing. BUG=chrome-os-partner:23085 BRANCH=None TEST=Built and partially booted with changes that use PUNIT registers and individual byte en fields. Change-Id: I929fb5c51d805c55c478cab884e3572254987fc7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171710 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4859 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: import and use updated mrc_wrapper.hAaron Durbin
The mrc_wrapper.h was changed to protect against ABI differences between the two sets of compilers and flags used. This requires a prope shim for the console output funciton. BUG=chrome-os-partner:23048 BRANCH=None TEST=Built and booted successfully. Change-Id: I976e692e66dcfc0eacadae6173abfd9b81e31137 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171580 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4858 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: Rearrange config options alphanumericallyVadim Bendebury
This is a no-op change for easier maintenance. BUG=none TEST=manual . baitrail coreboot still builds and runs Change-Id: I0c0bd78c6f361e8f81979f19cce148e7f51865ee Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171002 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4857 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-05baytrail: start collecting timestampsAaron Durbin
This commit always selects COLLECT_TIMESTAMPS and starts tracking TSC values from the early stages of bootblock. The initial timestamp value is saved in mm0 and mm1 while in bootlbock. This approach works because romcc is not configured to use mmx registers for its compilation. Additionally, the romstage api with the mainboard was changed to always pass around a pointer to a romstage_params structure as the timestamps are saved in there until ram is up. BUG=chrome-os-partner:22873 BRANCH=None TEST=Built and booted with added code to print out timestamps at end of ramstage. Everything looks legit. Change-Id: Iba8d5fff1654afa6471088c46a357474ba533236 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170950 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4856 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-03baytrail: Add GPIO initial configuration infrastructure.Shawn Nematbakhsh
During ramstage, call mainboard_get_gpios to get initial GPIO configuration from the mainboard code, then initialize GPIOs as requested. BUG=chrome-os-partner:22863 TEST=Manual. Using bayleybay GPIO table, set UART GPIOs to 'function 1', and verify UART still works after GPIO configuration. Also, verify legacy GPIO config is functional by toggling test pin. Change-Id: Ic58d8ddd15c4dc48a751a83f6d26c7809c1efc42 Reviewed-on: https://chromium-review.googlesource.com/170306 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4855 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-02Add section header parsing and use it in the mk-payload stepRonald G. Minnich
This completes the improvements to the ELF file parsing code. We can now parse section headers too, across all 4 combinations of word size and endianness. I had hoped to completely remove the use of htonl until I found it in cbfs_image.c. That's a battle for another day. There's now a handy macro to create magic numbers in host byte order. I'm using it for all the PAYLOAD_SEGMENT_* constants and maybe we can use it for the others too, but this is sensitive code and I'd rather change one thing at a time. To maximize the ease of use for users, elf parsing is accomplished with just one function: int elf_headers(const struct buffer *pinput, Elf64_Ehdr *ehdr, Elf64_Phdr **pphdr, Elf64_Shdr **pshdr) which requires the ehdr and pphdr pointers to be non-NULL, but allows the pshdr to be NULL. If pshdr is NULL, the code will not try to read in section headers. To satisfy our powerful scripts, I had to remove the ^M from an unrelated microcode file. BUG=None TEST=Build a peppy image (known to boot) with old and new versions and verify they are bit-for-bit the same. This was also fully tested across all chromebooks for building and booting and running chromeos. BRANCH=None Change-Id: I54dad887d922428b6175fdb6a9cdfadd8a6bb889 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/181272 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: http://review.coreboot.org/5098 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-31baytrail: introduce pattrsAaron Durbin
The pattrs structure is intended for the supporting coreboot code to reference instead of going back to the source of the values (msrs, cpuid, etc). It essentially serves as a global structure for collecting attributes about the platform/processor. Additionally, the implementation provides a point during boot to hoook work before device enumeration/initialization by providing a init() function to soc_intel_baytrail_ops that is called before device work in the boot state machine. BUG=chrome-os-partner:22862 BUG=chrome-os-partner:22863 BRANCH=None TEST=Built and booted. Noted pattrs output. Change-Id: I073da8aca29635146fb0d4a2625b2b7564fd8414 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170403 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4854 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: add dunit access and registersAaron Durbin
The dunit on baytrail is the dram unit. Provide a means to access the configuration registers there using the proper IOSF mechanisms. BUG=chrome-os-partner:22875 BRANCH=none TEST=Built and booted. Able to read dram registers. Change-Id: I4d5c019720a7883fe93f3e1860bcd57ce2ea6542 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170490 Reviewed-on: http://review.coreboot.org/4853 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: set host memory mapAaron Durbin
Prior to this commit the coreboot resource allocator was not using proper addresses. That's not surprising there wasn't any code to initialize the resources properly. This commit initializes the memory map accoring to the BUNIT registers. BUG=chrome-os-partner:22860 BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted. Noted output for resource assignments is sane. Change-Id: Ice8d067d8b993736de5c5b273a0f642fa034a024 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170429 Reviewed-on: http://review.coreboot.org/4852 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: add common pci_operationsAaron Durbin
The coreboot device modeling for pci devices wants a pci_operations structure for all devices. This structure just sets the subsystem vendor and device id. Add a common one that all the other pci drivers can use for Bay Trail. BUG=chrome-os-partner:22860 BRANCH=None TEST=Built and booted while utilizing this new structure. Change-Id: I39949cbdb83b3acb93fe4034eb4278d45369e321 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170428 Reviewed-on: http://review.coreboot.org/4851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: initialize graphics before MRCAaron Durbin
The graphics device needs to have its resource contraints initialized before running the reference code. Right now just use a 256MiB aperture, 32MiB of stolen memory data, and 2MiB GTT memory. BUG=chrome-os-partner:22869 BRANCH=None TEST=Built and booted. Noted amount of stolen memory matches configuration as well as BAR size within the graphics device. Change-Id: I328bf858f288363187cf705d6340947393b5ff10 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170427 Reviewed-on: http://review.coreboot.org/4850 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: cache ROM space early in bootblockAaron Durbin
Take advantage of the cache early in bootblock. The intent is to speed up cbfs walking when trying to locate romstage. BUG=chrome-os-partner:22857 BRANCH=None TEST=Built and booted. Change-Id: If03210103c9782390230915db3b4a9759d172dce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170426 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: update microcode to version 313Aaron Durbin
B2 and B3 steppings are now bumped to version 313. BUG=chrome-os-partner:22858 BRANCH=None TEST=Built. Change-Id: I09ae5110b66c725e959e95fc15bc85ccf371495d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170425 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4848 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-31baytrail: add initial supportAaron Durbin
The initial Bay Trail code is intended to support the mobile and desktop version of Bay Trail. This support can train memory and execute through ramstage. However, the resource allocation is not curently handled correctly. The MRC cache parameters are successfully saved and reused after the initial cold boot. BUG=chrome-os-partner:22292 BRANCH=None TEST=Built and booted on a reference board through ramstage. Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/168387 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4847 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 07:07:13 +0000