summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2021-12-28soc/mediatek/mt8195: Move some definations of devapc to common folderRex-BC Chen
Move some definations of devapc for sharing between MT8195 and MT8186. BUG=b:202871018 TEST=emerge-cherry coreboot; emerge-corsola coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1769ede790f106a320ead9be7e2a596fe96930a Reviewed-on: https://review.coreboot.org/c/coreboot/+/60394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-28soc/mediatek/mt8186: Adjust usage of SRAM L2CRex-BC Chen
We use parts of SRAM_L2C as the memory of PRERAM_CBMEM_CONSOLE before DRAM calibration. When we check cbmem, we found the content of this memory is unreadable. The L3 (can be used as SRAM_L2C) is 1MB in total. However the BootROM has configured only half of L2/L3 cache as SRAM. Therefore, decrease the size of each SRAM region to fit into the first half of the cache. BUG=b:207725851 TEST=Bootblock log looked good in `cbmem -c` Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6041767a1ac0a48ecdda29a0c35d90acf6ad0ef2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-26soc/medaitek/mt8195: adjust USB phy shift valueRex-BC Chen
There is a design issue of bit shift which will drop a bit for USB3 phy on MT8195. Therefore, we add this patch to set USB phy registers from value of efuse. BUG=b:211528577 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Tianping Fang <tianping.fang@mediatek.corp-partner.google.com> Tested-by: Tianping Fang <tianping.fang@mediatek.corp-partner.google.com> Change-Id: I43cb6c1c795dd181d6eba7f3bc52e4eb1a602081 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60312 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-26soc/intel/{skl,cnl}: Guard USB macro parametersAngel Pons
Add parentheses around the parameter of the `USB_PORT_WAKE_ENABLE` macro to prevent unintentional operator precedence problems. Change-Id: I61fbacc129cbfb42ade7e64ee40cd07c98d87683 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-23soc/intel/alderlake: Add timestamp for cse_fw_syncSridhar Siricilla
The patch add timestamp around cse_fw_sync(). TEST=Verified on Brya, cbmem -t: 948:starting CSE firmware sync 1,381,577 (45,227) 949:finished CSE firmware sync 1,459,513 (77,936) Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Idba11417e0fc7c18d0d938a4293ec3aff1537fb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-12-22soc/intel/alderlake: remove SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADSScott Chao
This causes the I2C touchpad device to stop working after warm reboot. BUG=b:210701402 BRANCH=none TEST=after warm reboot, the touchpad still works. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I106ddc96c3185656d3f1fbcd45f198d2d46f3f4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/60126 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-20soc/amd/cezanne: Correct S0i3 verstage softfuse bitRob Barnes
PSP_S0I3_RESUME_VERSTAGE softfuse bit is 58, not 40. BUG=b:202397678 BRANCH=None TEST=Boot guybrush, ensure S0i3 verstage runs with latest PSP. Change-Id: Ia27f6e48e345aac0d5f6579d663a6b655688239a Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-20soc/intel/common: Do not trigger crashlog on all resets by defaultCurtis Chen
Crashlog has error records and PMC reset records two parts. When we send ipc cmd "PMC_IPC_CMD_ID_CRASHLOG_ON_RESET", PMC reset record is enabled. At each warm/cold/global reset, crashlog would be triggered. The cause of this crash would be "TRIGGER_ON_ALL_RESETS", it is used to catch unknown reset reason. At the same time, we would see [Hardware Error] in the kernel log. If we default enable TRIGGER_ON_ALL_RESETS, we would have too many false alarm. Now we disable PMC reset records part by default. And we could enable it when we need it for the debug purpose. The generated bert dump is under /var/spool/crash/, we could check this path to verify this CONFIG disable/enable status. BUG=b:202737385 TEST=No new bert dump after a warm reset. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I3ec4ff3c8a3799156de030f4556fe6ce61305139 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-20soc/amd/common/lpc/espi_util: use enum cb_err type for return valuesFelix Held
Use enum cb_err as return type of all remaining functions that only return success or failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6cff8480d99641fdfb613bb3e4edc4055ad5efc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/common/lpc/espi_util: use enum cb_err type for return valuesFelix Held
Use enum cb_err as return type of all functions that aren't exposed outside of this compilation unit. The checks if a function has returned a failure are replaced with checks if the return value isn't CB_SUCCESS which is equivalent if only those two values are used, but also detects a failure if any unexpected value would be returned. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If8c703f62babac31948d0878e91bd31b31bebc01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/common/lpc/espi_util: simplify espi_configure_decodesFelix Held
The intermediate ret variable isn't needed. espi_open_generic_io_window only returns 0 or -1, so if ret is != 0, it has to be -1. This is a preparation to use the enum cb_err type for the return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6c7f4cedf8c2defadcf4c4da1697a97c7b401f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/common/lpc/espi_util: simplify espi_get_general_configurationFelix Held
The intermediate ret variable isn't needed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e6747cf468c5ba8da6c1a3b20022851e32ad951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/cezanne/fch: disable 48MHz output in S0i3Felix Held
S0i3 is a low power state which reduces the power consumption to about the level of the S3 suspend state where the DRAM is kept in a self- refresh state and most of the rest of the system is powered down. So everything that can be switched off in the S0i3 state should be switched off in order to maximize the standby time. BUG=b:210722314 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If445f5825dc7b795c95d73c061156cc485421ada Reviewed-on: https://review.coreboot.org/c/coreboot/+/60125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-20soc/amd/stoneyridge/fch: add GNVS-related TODOsFelix Held
The AOAC device states shouldn't be stored in GNVS, but be read from the AOAC registers during runtime. Same for the EHCI controller's BAR0. The location and size of the XHCI firmware can either be statically determined at build-time or have coreboot generate ACPI objects that contain the needed addresses. Since I can't easily test changes that require booting to a desktop on Stoneyridge at the moment, only add TODOs for now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I3691b05606b9430cb60923780a6131993a9887d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/stoneyridge: split southbridge codeFelix Held
Split the southbridge code into a bootblock and a ramstage part to align it more with Picasso and Cezanne. Also move the implementation of fch_clk_output_48Mhz to the end of early_fch.c since it's not really related to the functions that were previously around it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib660fbef8dc25ba0fab803ccd82b3408878d1588 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/stoneyridge: factor out AGESA-wrapper related FCH functionsFelix Held
Split the code that gets called from the AGESA wrapper from the rest of the FCH/southbridge code that directly interacts with the hardware. Since the remaining parts of southbridge.c aren't used in romstage, drop it from the list of build targets for romstage. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6197add0e1396a82545735653110e1e17bf9c303 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd/stoneyridge: factor out early AOAC initializationFelix Held
Factor out enable_aoac_devices out of southbridge.c to aoac.c to align Stoneyridge more with Picasso and Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ied4d821138507639cad1794f6c5017b5873b761f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-20soc/amd: remove root of SoC directory from include pathFelix Held
We shouldn't be providing -I include paths to the root of the soc specific directory. It allows for lazy includes that can collide, but there's no way of knowing the winning path since the winning path is determined by Makefile.inc parsing order. This is taken from CB:41355 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I45ed219e4e0cccf3d4f04cc70dc1ef77c518afff Reviewed-on: https://review.coreboot.org/c/coreboot/+/60201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-20soc/amd/stoneyridge/include/southbridge: remove unneeded chip.h includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b37efc89e505c2de99536b59e7d7e2bb1d54bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/60199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-18soc/amd/cezanne/acpi: Add support for RTC workaroundRaul E Rangel
The RTC on Cezanne is an unstable wake source when the system is in S0i3. We instead need to use an internal timer that triggers a GPIO that acts as a wake source. This change provides the ACPI necessary to allow the OS to manage the wake source. BUG=b:209705576 TEST=Boot guybrush with this patch and several OS patches. Verified the OS sets the correct wake bit, the system correctly suspends and resumes, and the wake source is correctly accounted for. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f14d14df5d30d48d244416f2ec8c10ac5c8040e Reviewed-on: https://review.coreboot.org/c/coreboot/+/60172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-18soc/amd/common/block/acpimmio/print_reset_status: add missing status bitFelix Held
Both the Picasso PPR #55570 Rev 3.18 and the Cezanne PPR #56569 Rev 3.03 define bit 9 of the PM_RST_STATUS register as internal Thermal Trip reset status bit. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ida8b13fe62b16c18fc9924520b83220e73eca624 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-17soc/intel/denverton_ns: Use `popcnt()` helperAngel Pons
Use the `popcnt()` helper instead of manually counting the number of set bits in the first `CONFIG_MAX_CPUS` bits with a loop. Also, use unsigned types to store the number of active/total cores. Change-Id: Iae6b16991fcf07c9ad67d2b737e490212b8deedd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-16Spell *Boot Guard* with a space for official spellingPaul Menzel
See for example Intel document *Secure the Network Infrastructure – Secure Boot Methodologies* [1]. Change all occurrences with the command below: $ git grep -l BootGuard | xargs sed -i 's/BootGuard/Boot Guard/g' [1]: https://builders.intel.com/docs/networkbuilders/secure-the-network-infrastructure-secure-boot-methodologies.pdf Change-Id: I69fb64b525fb4799bcb9d75624003c0d59b885b5 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15soc/amd/common/block/psp: move psp_notify_dram to psp_gen1.cFelix Held
The MBOX_BIOS_CMD_DRAM_INFO PSP mailbox command is only available on the first generation of PSP mailbox interface and not on the second generation. The second generation of the PSP mailbox interface was introduced with the AMD family 17h SoCs on which the DRAM is already initialized before the x86 cores are released from reset. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I97b29fdc4a71d6493ec63fa60f580778f026ec0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/60124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-15soc/amd/common/block/spi/fch_spi_ctrl: improve printk messagesFelix Held
Replace FCH_SC with FCH SPI in the printk messages to make those a bit clearer and also remove an unneeded line break in another printk call. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6ff02163e6a48a2cc8b7fe89b15826e154715d29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/block/spi/fch_spi_ctrl: handle failure in execute_commandFelix Held
When wait_for_ready returned a timeout, execute_command still ended up returning success. Fix this be returning a failure in this case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id012e74e26065c12d003793322dcdd448df758b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/block/spi/fch_spi_ctrl: rework dump_stateFelix Held
Introduce and use enum spi_dump_state_phase to indicate from which phase of the SPI transfer dump_state gets called to print the relevant debug information for that phase. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f54d4a7eb2f3b9756b77a01533f7c99e8597bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/60118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/include/spi: add Cezanne-specific commentFelix Held
The Cezanne PPR #56569 Rev 3.03 has one more SPI FIFO bytes defined compared to the previous generations. It is unclear if adding some special handling for Cezanne would be worth the effort, since the current code just doesn't use the last byte which should be safe to do, since this only affects the maximum number of bytes that can be used for one SPI transaction. Having another byte to use on Cezanne wouldn't reduce the number of SPI transactions to write a 256 byte data block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic730f4fe838f59066120c811833995c132c84c1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/60117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/amd/common/include/spi: fix SPI_FIFO_LAST_BYTE defineFelix Held
The last byte of the SPI FIFO SPI_FIFO_LAST_BYTE is at offset 0xc6 of the SPI controller's MMIO region for Stoneyridge and Picasso. Both SPI_FIFO_LAST_BYTE and SPI_FIFO_DEPTH had an off-by-one error that ended up cancelling out each other, so the resulting value for SPI_FIFO_DEPTH isn't changed. TEST=Timeless build results in identical image for Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1676be902ccf57e2e9f69d81251b4315866a0628 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-15soc/intel/denverton_ns: Fix MRC_RW_CACHEKyösti Mälkki
It is required to set WPD (Write Protect Disable) bit to make it possible to use MRC_RW_CACHE region with CACHE_MRC_SETTINGS=y. Change-Id: Iacab44b00d08c9bdc18bc3bdcb88833634c0b02e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15soc/intel/denverton_ns: Use common SMBus support codeKyösti Mälkki
Change-Id: I233d198b894f10fbf0042a5023ae8a9c14136513 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15soc/intel/baytrail,denverton_ns: Call setup_lapic()Dmitry Ponamorev
A custom board with soc/intel/denverton_ns does not respond to the keyboard and does not boot from the sata/USB disks. Last post code 0x7b and the last line that is displayed at log from SeaBIOS is: All threads complete. The issue is gone when adding setup_lapic() call to configure EXTINT delivery of i8259 originated interrupts for the LAPIC. Replicate call from other soc/ and make the call for both BSP and AP CPUs. Similar change was done for soc/intel/braswell in commit b4f57bb3cac3ab29b9fa9c526ad4358faffb77a1. Signed-off-by: Dmitry Ponamorev <dponamorev@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: Iafbfb733d0be546e0e2fba937fd1d262785aa54d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-15mb/google/corsola: move USB3 HUB reset funtion to bootblockRex-BC Chen
To save the S3 power, USB3_HUB_RST_L is externally pulled up to a weak resistor, so we have to reset the hub as early as possible. Otherwise the USB3 hub may be not usable. Therefore, move USB3 HUB reset function to bootblock. BUG=b:210065282 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I92feb2316302fda32478b24c014bcd380d0ac55d Reviewed-on: https://review.coreboot.org/c/coreboot/+/60088 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-14soc/mediatek/mt8186: add tracker dumpRex-BC Chen
Tracker is a debugging tool, and MT8186 only supports AP tracker. When bus timeout occurs, the system reboots and latches some values which could be used for debugging. This function will be triggered only when it encounters the bug hanging issue. BUG=b:202871018 TEST=range of registers are dumped as expected. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie023de2a6f7421a16b2516baa0bf0bf6fff589e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-14soc/mediatek: add support for tracker version oneRex-BC Chen
There are two versions for tracker system: Version 1 for MT8186, and version 2 for MT8192 and MT8195. Reference document: MT8169_bus_dbg_tracker_cfg_reg.xls from MediaTek internal. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idb146974da118b1cf5a349370bf7b2fa13f1aba8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59989 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-14soc/amd/{cezanne,common}: Add PSP_S0I3_RESUME_VERSTAGE Kconfig optionRob Barnes
Add PSP_S0I3_RESUME_VERSTAGE Kconfig option. When enabled, verstage will be run in PSP during S0i3 resume. Setting softfuse bit 40 enables this in PSP. BUG=b:200578885, b:202397678 BRANCH=None TEST=Verstage runs during s0i3 resume on Nipperkin Change-Id: I2c185f787c1e77bd09f6cbbb1f47deb665ed0c79 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-13soc/intel/common/cse: Update help text for CSE_OEMP_FILEravindr1
The OEM may create and sign an Audio component to extend the Audio capability provided by Intel. The manifest is then signed, and the signature and public key are entered into the header of the manifest to create the final signed component binary. This creates a secure verification mechanism where firmware verifies that the OEM Key Manifest was signed with a key owned by a trusted owner. Once OEM KM is authenticated, each public key hash stored within the OEM KM is able to authenticate the corresponding FW binary. Link to the Document: https://www.intel.com/content/www/us/en/secure/design/confidential/software-kits/kit-details.html?kitId=689893 ADL_Signing_and_Manifesting_User_Guide.pdf BUG=b:207820413 TEST:none Signed-off-by: ravindr1 <ravindra@intel.com> Change-Id: Id52b51ab1c910d70b7897eb31add8287b5b0166f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-13soc/intel/common/block/cpu/car/exit_car_fsp.S: Align stackArthur Heymans
Change-Id: I6b5864cfb9b013559cd318bc01733ba4d3792e65 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-13soc/amd/cezanne: Don't select CPU_INFO_V2 explicitlyNico Huber
It's already implied by PARALLEL_MP now. Change-Id: Ia76f1a925b2c0ebbba0bf20b094e716708d540c2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-13soc/intel/alderlake: Implement function to map physical port to EC portMAULIK V VAGHELA
Currently coreboot and EC had different logic to interpret TCSS port number which would break retimer update functionality since coreboot would pass wrong port information to EC. To correct this, coreboot has implemented function which converts coreboot physical port mapping to EC's abstract port mapping. Each SoC needs to implement this weak function since only SoC will have correct physical port mapping data. This function should resolve issue of port mismatch since coreboot will count only enabled ports and provide correct EC port number in return. BUG=b:207057940 BRANCH=None TEST=Check if retimer update works on Redrix and correct port information is passed to EC. Change-Id: I3735b7c7794b46123aba3beac8c0268ce72d658c Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-13soc/intel/common/block/pcie/rtd3: Add ModPHY power gate support for RTD3Tim Wawrzynczak
For additional power savings during RTD3, the PMC can power-gate the ModPHY lanes that are used by the PCH PCIe root ports. Therefore, using the previous PCIe RP-type detection functions, implement ModPHY PG support for the PCH PCIe RPs. This involves: 1) Adding a mutex so only one power resource accesses the PMC registers at a time 2) OperationRegions to access the PMC's PG registers 3) Adding ModPHY PG enable sequence to _OFF 4) Adding ModPHY PG disable sequence to _ON BUG=b:197983574 TEST=50 S0ix suspend/resume cycles on brya0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I19cb05a74acfa3ded7867b1cac32c161a83b4f7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59855 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-13soc/intel/alderlake: Define soc_get_pcie_rp_typeTim Wawrzynczak
In order to distinguish PCH from CPU PCIe RPs, define the soc_get_pcie_rp_type function for Alder Lake. While we're here, add PCIe RP group definitions for PCH-M chipsets. BUG=b:197983574 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7438513e10b7cea8dac678b97a901b710247c188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-13soc/intel/tigerlake: Define soc_get_pcie_rp_typeTim Wawrzynczak
In order to distinguish PCH from CPU PCIe RPs, define the soc_get_pcie_rp_type function for Tiger Lake. BUG=b:197983574 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic3f7d3f2fc12ae2b53604cd8f8b694a7674c3620 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-13drivers/intel/mipi_camera: Add ACPI entry to provide silicon type infoSugnan Prabhu S
Add entry in ACPI table under IPU device to provide silicon type information to IPU driver. IPU kernel driver can decide the type of firmware to load based on this information. BUG=b:207721978 BRANCH=none TEST=Check for the ACPI entry in the SSDT after booting to kernel Change-Id: I4e0af1dd50b9c014cae5454fcd4f9f76d0e0a85f Cq-Depend: chromium:3319905 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-13soc/intel/cannonlake: Configure common FSP memory settings only onceFelix Singer
`meminit_memcfg()` does common memory configuration, which is not specific to each DIMM. Thus, move it out of the for-loop and call it once. Change-Id: If74875b45cd0d7a759883eaf564505ebf281bed5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-12soc/intel/elkhartlake: Hook up public microcodeArthur Heymans
Change-Id: I1d975713129d0a7bce823232d225ed17ee28a04d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-12soc/intel/jasperlake: Hook up public microcodeArthur Heymans
Change-Id: I9e511de5e5b79936ed09538b3877655f78de15a9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-12soc/intel/cannonlake: Rename SA_DEV_SLOT_DSPFelix Singer
Device 4 was introduced with a wrong name, since it is the SA Thermal Subsystem and it does nothing have to do with DSP. Thus, rename it accordingly. Change-Id: I8edc764413df5f323098e60d0a3f0f87a7e656cb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60049 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-10soc/intel/{skylake/cannonlake}: Fix bug in vr_configAngel Pons
The `cpu_get_power_max()` function returns the TDP in milliwatts, but the vr_config code interprets the value in watts. Divide the value by 1000 to fix this. This also fixes an integer overflow when `cpu_get_power_max()` returns a value greater than 65535 (UINT16_MAX). Change-Id: Ibe9e0db6762eee5cc363f8b371c8538eb92f6308 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-10soc/intel/cse: config to enable oem key manifestRavindra N
CB change will enable the CSE region sub-partition OEMP, where the OEMP binary will be stitched. OEM KM has Audio FW's key hash. So, CSE uses this information to authenticate Audio FW. BUG=b:207820413 TEST: Boot to kernel and check for the audio authentication is successful localhost ~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sofrt5682 [sof-rt5682], device 0: max357a-spk (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 1: Headset (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 2: HDMI1 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 3: HDMI2 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 4: HDMI3 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 5: HDMI4 (*) [] Subdevices: 1/1 Subdevice #0: subdevice #0 Cq-Depend: chrome-internal:4286038 Signed-off-by: Ravindra N <ravindra@intel.corp-partner.google.com> Change-Id: I3620adb2898efc002104e0ba8b2afd219c31f230 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2021-12-09soc/intel/tigerlake: Hook up DPTF device to devicetreeFelix Singer
Hook up `Device4Enable` FSP setting to devicetree state and drop its redundant devicetree setting `Device4Enable`. The following mainboards enable the DPTF device in the devicetree despite `Device4Enable` is not being set. * google/deltaur Thus, set it to off to keep the current state unchanged. Change-Id: Ic7636fc4f63d4beab92e742a6882ac55af2565bc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-09soc/intel/tigerlake: Drop unused SataEnable settingFelix Singer
`SataEnable` is set by some boards, but it doesn't have any effect since its related FSP option is hooked up to the devicetree state. Thus, drop it. Change-Id: Id645bfcade7ca1d495fb8df538113b3d10392a82 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-09soc/intel/tigerlake: Hook up SMBus device to devicetreeFelix Singer
Hook up `SmbusEnable` FSP setting to devicetree state and drop its redundant devicetree setting `SmbusEnable`. The following mainboards enable the SMBus device in the devicetree despite `SmbusEnable` is not being set. * google/deltaur * starlabs/laptop Thus, set it to off to keep the current state unchanged. Change-Id: I0789af20beb147fc1a6a7d046cdcea15cb44ce4c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-09soc/intel/alderlake: Fix value of SA_DEVFN_CPU_PCIE1_0Tim Wawrzynczak
The macro was defined using PCH_DEV_SLOT_CPU_1, which doesn't exist, so replace it with the correct value of SA_DEV_SLOT_CPU_1. Change-Id: If6d294d681907c51ac5678c9251364d4d6df4329 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-09soc/amd/stoneyridge: use common fch_spi_early_initFelix Held
All SPI interface setup related functionality that Stoneyridge implemented in its southbridge code is already present in the common AMD SoC code, so use that code instead. The common fch_spi_early_init function requires the SPI controller's base address to be set, so call lpc_set_spibase(SPI_BASE_ADDRESS) right before it. fch_spi_early_init then calls lpc_enable_spi_rom and lpc_enable_spi_prefetch which can be removed from the board code now. Next it calls fch_spi_configure_4dw_burst which does the same as the now removed sb_disable_4dw_burst function when SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST is set to n which is the default. This option can also only be set to y for SoCs that aren't Stoneyridge. Finally fch_spi_early_init calls fch_spi_config_modes which configures the SPI mode and speed settings according to the Kconfig settings and the settings in the amdfw part. On Kahlee this was done by calls to sb_read_mode and sb_set_spi100 before. The previous patch added the remaining Kconfig settings, so the resulting register values don't change in the non-EM100 case. In the EM100 case the TPM speed is changed from 64 to 16 MHz. TEST=Both the non-EM100 mode with a real SPI flash and the EM100 mode with a first-generation EM100 results in Google/Barla reaching the payload and the show_spi_speeds_and_modes call in bootblock prints the expected settings: relevant bootblock console output in non-EM100 case: SPI normal read speed: 33.33 MHz SPI fast read speed: 66.66 Mhz SPI alt read speed: 66.66 Mhz SPI TPM read speed: 66.66 Mhz SPI100: Enabled SPI Read Mode: Dual IO (1-2-2) relevant bootblock console output in EM100 case: SPI normal read speed: 16.66 MHz SPI fast read speed: 16.66 MHz SPI alt read speed: 16.66 MHz SPI TPM read speed: 16.66 MHz SPI100: Enabled SPI Read Mode: Normal Read (up to 33M) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f37a3b040808d6a5a8e07d39b6d4a1e1981355c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-09soc/amd/common/block/psp: add psp_efs.c to build for both PSP GEN1&2Felix Held
The PSP EFS code to get the SPI mode and speed from the amdfw part of the firmware image also works for Stoneyridge which is the one SoC that selects SOC_AMD_COMMON_BLOCK_PSP_GEN1. Also amdblocks/psp_efs.h already handles the SOC_AMD_STONEYRIDGE case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibddd3f9237e561d9f0f6b4ad70f59cce1f956986 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-09soc/mediatek/mt8186: Enable ARM Trusted Firmware integrationRex-BC Chen
Enable configuration to build with MT8186 arm-trusted-firmware drivers. TEST=build pass BUG=b:202871018 Cq-Depend: chromium:3189573 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib23b112a0bf3d056b932a87b86aaff79508ef50c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08soc/intel/common/pch: Fix return value documentation for CHIPSET_LOCKDOWNJingle Hsu
Fixed according to the declaration in soc/intel/common/block/include/intelblocks/cfg.h. Change-Id: I50dbc00806fefda8f4dac8bfa21dc714a9504566 Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-08soc/amd/{cezanne,picasso,stoney,common}: Don't clear PM1 on resumeRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit (and thus passing control to OSPM). For ACPI > only platforms (where SCI_EN is always set), when transitioning from > either the mechanical off (G3) or soft-off state to the G0 working > state this register is cleared prior to entering the G0 working state. This means we don't want to clear the PM1 register on resume. By clearing it the linux kernel can't correctly increment the wake count when the power button is pressed. The AMD platforms implement the _SWS ACPI methods, but the linux kernel doesn't actually use these methods. BUG=b:172021431 TEST=suspend zork and push power button and verify power button wake_count increments. Verified other wake sources still work. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/stoneyridge/southbridge: drop ENV_X86 checkFelix Held
Stoneyridge selects ARCH_X86 unconditionally and all coreboot code will run on the x86 cores. On Picasso and later, the Chromebooks run verstage on the PSP which is an ARM V7 core which needs some special handling cases in the code, but this doesn't apply to Stoneyridge. TEST=Timeless build results in an identical image for Google/Careena. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I013efd13b56c0191af034a8c4b58e9b26a31c6e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/amd/{cezanne,picasso,stoney}: Clear PM/GPE when enabling ACPIRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states# > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit. This change makes sure we clear the PM/GPE blocks are cleared before enabling the SCI_EN bit. BUG=b:172021431 TEST=Boot guybrush and morphius to OS and verify suspend resume still works. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/stoneyridge/southbridge: fix setting SPI_USE_SPI100Felix Held
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in the SPI100_ENABLE register. This avoids clearing other bits in the register which might cause instabilities of the SPI interface. The reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and doesn't zero out the other bits. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/amd/common/block/spi: fix setting SPI_USE_SPI100 in SPI100_ENABLEFelix Held
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in the SPI100_ENABLE register. This avoids clearing other bits in the register which might cause instabilities of the SPI interface. The reference code for both Picasso and Cezanne also only sets the SPI_USE_SPI100 bit and doesn't zero out the other bits. TEST=Verified that Mandolin still boots. It didn't show any signs of possibly related instabilities before though, so this test doesn't say much. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/amd/common/block/include/spi: update fch_spi_early_init descriptionFelix Held
commit 90ac882a32075b44435aa19ea664b89b79cac76e (soc/amd/common/block/ spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig option to enable/disable the 4DW burst support in the SPI flash data prefetcher, but missed to update the documentation above the fch_spi_early_init prototype, so update the outdated documentation now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/mediatek/mt8186: Correct SPI_HZ for PLLRex-BC Chen
The SPI speed is 218.4MHz, so correct the value of SPI_HZ. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6e8ba10a851e1507405cdd41939a176462734487 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08soc/mediatek/mt8186: revise SPI NOR GPIO selectionRex-BC Chen
The setting of SPI NOR GPIOs should be: CS: pull up. CLK/IO0/IO1: pull down. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ideacb797a1dc9999ab6ba00cf33adbbbc24213dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08mb/google/zork,soc/amd/psp_verstage: Add verstage_mb_{tpm/espi}_initRaul E Rangel
These functions can't be weak, because they actually need to configure the GPIOs for eSPI and the TPM. With this change zork boots again. I also noticed that zork doesn't use the early table in bootblock. This means that zork will only boot if psp_verstage is enabled. BUG=b:209465425 TEST=boot zork to ramstage Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-08soc/amd: use KiB and MiB definitionsFelix Held
Use KiB and MiB instead of multiplying/dividing with/by the numeric value when doing region size calculations. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I56c380190b11aa3214cce31b82974327e3d15000 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-07soc/intel/alderlake: enable gpio lockingNick Vaccaro
This change supplies a list of ADL gpios that are connected to non-host (x86) controllers and should be locked after initial configuration. Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking. BUG=b:210430600 TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that brya0 boots successfully to kernel. Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-07soc/intel/common: add generic gpio lock mechanismNick Vaccaro
For added security, there are some gpios that an SoC will want to lock once initially configured, such as gpios attached to non-host (x86) controllers, so that they can't be recofigured at a later point in time by rogue code. Likewise, a mainboard may have some gpios connected to secure busses and/or devices that they want to protect from being changed post initial configuration. This change adds a generic gpio locking mechanism that allows the SoC to export a list of GPIOs to be locked down and allows the mainboard to export a list of GPIOs that it wants locked down once initialization is complete. Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to enable this feature. BUG=b:201430600 TEST='emerge-brya coreboot chromeos-bootimage', flash and verify brya0 boots successfully to kernel. Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel/alderlake: Add ADL-P 6+8+2 (28W) VR configCurtis Chen
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the power map, fill in correct ADL-P 6+8+2 (28W) VR configuration. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/mediatek/mt8195: complete devapc settingsNina Wu
In previous patch (CB:56764), only basic settings were added. Now complete devapc settings on MT8195. 1. Update permission setting 2. Updtate master domain setting: - domain 1: PCIE0, PCIE1 - domain 2: SPM, SSPM, CPU_EB 3. Set domain remap - MMSYS (4-bit to 2-bit) - TINYSYS (4-bit to 3-bit) - TINYSYS (3-bit to 4-bit) - TINYSYS to EMI (3-bit to 4-bit) - INFRA2 (3-bit to 4-bit) 4. Set SCP domain and ADSP domain - domain 3: SCP - domain 4: ADSP BUG=b:204347737 TEST=sanity test pass Change-Id: I1846d56d2dc362de64b28e0ed9a0681f186af7ee Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59746 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-06soc/intel/alderlake: Add support for ADL-N CPU TypeUsha P
Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-12-06soc/intel/common: Refactor cpu_set_p_state_to_max_non_turbo_ratioSridhar Siricilla
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The function is updated to use cpu_get_max_non_turbo_ratio(). TEST=Build the code for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If73df17faaf7b870ae311460a868d52352683c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel/common: Add CPU related APIsSridahr Siricilla
The patch defines below APIs : cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not. cpu_get_bus_frequency() : Get CPU's bus frequency in MHz cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio cpu_get_cpu_type() : Get CPU type. The function must be called if executing CPU is hybrid. TEST=Verified the APIs on the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I680f43952ab4abce6e342206688ad32814970a91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel: Move enum pcie_rp_type to intelblocks/pcie_rp.hTim Wawrzynczak
This enum is useful to have around for more than just the one file, so move it to a common header file, and while we're there, also add an option for UNKNOWN. TEST=boot test on brya0 Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-03soc/intel/adl: Add override skip_cse_sub_part_update() for alderlakeKrishna Prasad Bhat
Check the Alderlake CPU ID to determine if cse sub-paritition update is required or not. BUG=b:202143532 Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Add support for CSE IOM/NPHY sub-parition updateKrishna Prasad Bhat
This patch adds the following support to coreboot 1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B partition of BIOS 2. Helper functions to support update. Pre-requisites to enable IOM/NPHY FW Update: 1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and FW_MAIN_B through board configuration files. CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path 2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition NPHY/IOM update. coreboot follows below procedure to update NPHY and IOM: NPHY Update: 1. coreboot will navigate through the CSE region, identify the CSE’s NPHY FW version and BIOS NPHY version. 2. Compare both versions, if there is a difference, CSE will trigger an NPHY FW update. Otherwise, skips the NPHY FW update. IOM Update: 1. coreboot will navigate through the CSE region, identify CSE's IOM FW version and BIOS IOM version. 2. Compares both versions, if there is a difference, coreboot will trigger an IOM FW update.Otherwise, skip IOM FW update. Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only if CSE boots from CSE RO Boot partition. Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then triggers update of NPHY and IOM FW in the CSE Region(RO and RW). coreboot triggers NPHY/IOM update procedure in all ChromeOS boot modes(Normal and Recovery). BUG=b:202143532 BRANCH=None TEST=Build and verify CSE sub-partitions IOM and NPHY are getting updated with CBFS IOM and NPHY blobs. Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after the update. Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Add check before sending HMRFPO_ENABLE commandSridhar Siricilla
This patch adds a check to determine if the CSE's current operation mode is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG, coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW partition. TEST=Verify sending HMRFPO_ENABLE command on Brya system. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Rename compare_cse_version() function nameSridhar Siricilla
The patch renames the compare_cse_version() function to the cse_compare_sub_part_version(). It makes the function generic so that it can be used to compare version of any CSE sub-partition like IOM, NPHY etc. TEST=Verified build for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03soc/intel/alderlake: Add support for ADL-N PCHUsha P
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to specify the correct amount of PCIe I/O. Document number 645550 indicates that Alder Lake-N has 12 PCH root ports and no CPU root ports. Document number 645548 indicates ADL-N has 5 clock sources and 5 clock request signals. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/alderlake: Add the CnviDdrRfim configurationRonak Kanabar
FSP v2422_01 introduced new FSPM UPD CnviDdrRfim. Add CnviDdrRfim config to control the CnviDdrRfim UPD from devicetree. Setting CnviDdrRfim to 1 enable CNVi DDR RFIM BUG=b:201724512 BRANCH=None TEST=Build and boot brya with debug FSP and verify CnviDdrRfim UPD value. Change-Id: Ia06c9ed77d78821fd4724046bae2f31c9d771518 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/alderlake: Add TDP to give correct VR configurationCurtis Chen
The VR configuration should be based on the different Soc SKU type. And we also have different SKU in the same SA PCI ID. Therefore, add TDP to recognize the correct SKU and give the correct power setting. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/amd/cezanne: Enable secure countersKarthikeyan Ramasubramanian
Guybrush uses secure counters to protect against High Definition (HD) protected content rollback. These secure counters are hosted in TPM NVRAM. Enable secure counters so that they are defined in PSP verstage. BUG=b:205261728 TEST=Build and boot to OS in Guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM. Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-02soc/intel/alderlake: Add Kconfigs for all PCH typesAngel Pons
The Alder Lake code currently supports the PCH-M and PCH-P types, which have some differences (so far, only the amount of PCIe I/O). Mainboards can use the `SOC_INTEL_ALDERLAKE_PCH_M` Kconfig option to specify which PCH type they use: select the option to choose PCH-M, do not select the option to choose PCH-P. While this works, it can be confusing once more PCH types are added. Introduce the `SOC_INTEL_ALDERLAKE_PCH_P` Kconfig option so that boards have to explicitly choose a PCH type. Also, use this option to restrict the PCH-P defaults for PCH-dependent settings to avoid unintended reuse of the PCH-P defaults when adding a new PCH type. To make sure only one PCH type is selected, add some preprocessor in `bootblock.h` to provoke a build-time error if this requirement is not met. Kconfig doesn't seem to have a mechanism to describe sets of mutually-exclusive bool options that allows said options to be selected (a `choice` block doesn't allow its elements to be selected). Finally, adapt the ADL boards accordingly. Change-Id: I7deca820e08ce2b5a220f3c97a511a4f3464a976 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-12-01soc/intel/common/pmc: Drop unnecessary pmc_ipc.c entrySubrata Banik
This patch drops unnecessary `pmc_ipc.c` from Makefile as this file is getting included upon CONFIG_PMC_IPC_ACPI_INTERFACE selection. Change-Id: Ie66f0833daf033ec16210221610508f9fbb1e6c7 Signed-off-by: Subrata Banik <subi.banik@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-30soc/amd/stoneyridge/psp: move soc_get_mbox_address to common psp_gen1Felix Held
Despite Stoneyridge being one only SoC in soc/amd that uses the first generation of the PSP mailblox interface, this code is common for all SoCs that use the first PSP mailbox interface generation, so move it to the common PSP generation 1 code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78126cb710a6ee674b58b35c8294685a5965ecd6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59701 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-30soc/amd/cezanne: add missing PM_ACPI_* bit definitionsFelix Held
This part was copied from Picasso but Cezanne has some more bits used so add the definitions now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-30soc/amd/common/block/include/lpc: add missing LPC_PCI_CONTROL bit defsFelix Held
Both SPI_ROM_BIOS_SEMAPHORE and SPI_ROM_EC_SEMAPHORE bits in the LPC_PCI_CONTROL are defined in the Stoneyridge BKDG #55072 Rev 3.04, Raven1 and Picasso PPR #55570 Rev 3.18, Raven2 PPR #55772 Rev 3.08 and Cezanne PPR #56569 Rev 3.03 which are all platforms that use this code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I855e640d020daf21c9f5b2f62a2ad0fd0274a575 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-30intel: cse_lite: Use cbfs_unverified_area APIJulius Werner
This patch replaces the use of the deprecated cbfs_locate_file_in_region() API with the new cbfs_unverified_area_map(). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If4855280d6d06cf1aa646fded916fd830b287b30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-29sc7280: Add support for USBRavi Kumar Bokka
Adding USB addressmap for sc7280. Use common USB driver for sc7280. BUG=b:182963902 TEST=Validated USB enumeration on qcom sc7280 development board Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Change-Id: Ib92b74c8035a8c0148a9aa48e7870b261b832a33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-29soc/qualcomm/common/usb: Add support for common USB driverSandeep Maheswaram
Add common USB driver for qualcomm soc sc7180 and sc7280. This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy. BUG=b:182963902 TEST=Validated USB enumeration on qcom sc7180 and sc7280 development board Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Change-Id: I1013ded22855286220cfa747cb25418070fe85a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-29soc/amd/common/block/lpc: use 32 bit accesses in lpc_enable_port80Felix Held
When using 32 bit PCI accesses in lpc_enable_port80, we can use the LPC_IO_OR_MEM_DECODE_ENABLE and DECODE_IO_PORT_ENABLE4 defines and don't need to re-define bits with offsets from the beginning of the third byte within this 32 bit register. This allows to drop the LPC_IO_OR_MEM_DEC_EN_HIGH register definition which points to LPC_IO_OR_MEM_DECODE_ENABLE + 2 and to drop the re-definitions of the bit re-definitions with a different offset. The code in lpc_enable_port80 was originally copied from sb/amd/agesa/ hudson/early_setup.c which might be sort-of a copy from what the AGESA reference code does. TEST=When commenting out SOC_AMD_COMMON_BLOCK_USE_ESPI in the Kconfig of Mandolin and selecting AMD_LPC_DEBUG_CARD, all POST codes still get shown on the POST code LED display when this patch is applied. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I001bb1c2ccf99e36d4fbd73d3bf96b78ddb87d67 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29soc/amd/common/block/lpc/lpc_util: drop lpc_enable_pci_port80Felix Held
This function is unused and none of the SoCs using this code has a physical PCI interface any more, so drop this function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia5c5a8ec29264a075fefe75038ef2a84684d6427 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29src/cpu,soc/amd/common/block/cpu: Add preload_microcodeRaul E Rangel
This will enable preloading the microcode. By preloading the file, into cbfs_cache we reduce boot time. BUG=b:179699789 TEST=Boot guybrush with CL chain and see microcode preloading and a reduction of 1 ms. | 112 - started reading uCode | 1.041 | 1.204 Δ( 0.16, 0.01%) | | 113 - finished reading uCode | 1.365 | 0.011 Δ( -1.35, -0.10%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If0c634c692c97769e71acd1175fc464dc592c356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-29soc/amd/stoneyridge/psp: use PSP_MAILBOX_BAR defineFelix Held
PSP_MAILBOX_BAR is defined as PCI_BASE_ADDRESS_4, so use it instead of PCI_BASE_ADDRESS_4 in the code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8658b674b9adea85dfc71d7036ccf3ae17464b58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29soc/amd/common/block/psp/psp_def: drop PSPV2_STATUS_* definesFelix Held
PSPV2_STATUS_ERROR and PSPV2_STATUS_RECOVERY aren't used and the bit definitions are also wrong, so drop those defines. For the PSP mailbox interface version 2, struct pspv2_mbox is used to access the correct status bits. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8e2aadfde00e2f7b0f99b462b8e3d6954959a584 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29soc/mediatek: move bustracker_init before watchdog resets againRex-BC Chen
The checking register will be cleared after EC resets, so we move bustracker dump from ramstage to bootblock, before triggering EC reset. TEST=bustracker shows status before watchdog resets BUG=b:207743045 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/mediatek: Flush cache before triggering EC resetRex-BC Chen
There will be no log in cbmem if we trigger ec reset on bootblock stage. Therefore, call dcache_clean_all() before triggering ec reset to flush cache to store logs on cbmem. BUG=b:207743045 TEST=show logs on cbmem Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/intel/common: Include Alder Lake-N device IDsUsha P
Add Alder Lake-N specific CPU, System Agent, PCH (Alder Point aka ADP), IGD device IDs. Document Number: 619501, 645548 Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0974fc6ee2ca41d9525cc83155772f111c1fdf86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 18:34:48 +0000