summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2017-07-21Revert "soc/intel/cannonlake: Add postcar stage support"Martin Roth
This reverts commit 399c022a8c6cba7ad6d75fdf377a690395877611. This was merged too early. I'll repost it. Change-Id: Iabac0aaa0a16404c885875137cf34bf64bf956f7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20686 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21Revert "soc/intel/cannonlake: Call into FSP siliconinit"Martin Roth
This reverts commit dbe7f893c0e3fffc4e9862d872d65df752feaf9d. This was merged too early. I'll repost it. Change-Id: Ife56f45e91c0b961d0fad0e1872c6df3f9e18973 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20685 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21soc/intel/apollolake: Add pci device id for GLK IGDHannah Williams
Change-Id: Id2c94afed8976687524a0913ea1c13aeddd98333 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/20654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-21soc/intel/cannonlake: Call into FSP siliconinitLijian Zhao
The following changes can make system call into FSP siliconinit and exit from that until payloads. 1. Add frame to call fspsinit. 2. Temporarily set all the USB OC pin to 0 to pass FSP siliconinit. Change-Id: I1c9c35ececf3c28d7a024f10a5d326700cc8ac49 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21soc/intel/cannonlake: Add postcar stage supportLijian Zhao
Initialize postcar frame once finish FSP memoryinit Change-Id: I888d471fa620b7fc9f8975524a31f662e1fc5079 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21soc/intel/skylake: Perform LPC offset read after lockdown operationSubrata Banik
This patch is to provide an additional read LPC pci offset register BIOS_CONTROL (BC) - offset 0xDC to ensure that the last write is successful. Change-Id: I308c0622d348fc96c410a04ab4081bb6af98e874 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21common/block/fast_spi: Perform SPI offset read after lock down operationSubrata Banik
This patch is to provide an additional read SPI pci offset register BIOS_CONTROL (BC) - offset 0xDC to ensure that the last write is successful. Change-Id: I3b36c1a51ac059227631a04eb62b9a6807ed37b1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21soc/intel/skylake: Rectify LPC Lock Enable (LE) bit definitionSubrata Banik
LPC pci config register BIOS Control (BC) - offset 0xDC bit 1 is for Lock Down. Change-Id: I838dd946b8cdb7114f58ccc5d02159f241f0bad0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21soc/intel/apollolake: Bring in delta for GLK SOCHannah Williams
Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-20soc/intel/cannonlake: Make ramstage relocatableLijian Zhao
Relocate ramstage into CBMEM. Change-Id: I0543d25d722c5872f4f139a98e5125a41cc40653 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-20soc/intel/common/gpio: add helpers for relative pin calcuationsAaron Durbin
The gpio numbers are global, but they have their respective place within each community and the group within their community. For all the calculations open coding this calculation convert them to use the helpers. Change-Id: I0423490ae1740ef59225a70fea80a7d91ac2a39a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-20soc/intel/common/gpio: fix gpi_status_get()Aaron Durbin
A pad number is passed into gpi_status_get() to determine if its associated bit is set from a generated event. However, the implementation wasn't taking into account the gpi_status_offset which dictates the starting offset for each community. Additionally, the max_pads_per_group field is per community as well -- not global. Fix the code to properly take into account the community's gpi_status_offset as well as the max_pads_per_group. Change-Id: Ia18ac6cbac31e3da3ae0ce3764ac33aa9286ac63 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20652 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2017-07-20soc/intel/skylake: Remove dead `CONFIG_PRE_GRAPHICS_DELAY`Nico Huber
`CONFIG_PRE_GRAPHICS_DELAY` was only applied on a dead code path in `igd.c` that is guarded by always selected `CONFIG_ADD_VBT_DATA_FILE`. Nobody missed it for nearly a year, plus, it's not applied on the GOP path, let's drop it. Change-Id: I0b70cce3a3f2b50cb4e72c4d927b35510ff362a2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-20soc/intel/skylake/igd: Remove dead quirk from dead code pathNico Huber
This quirk was superseded a view lines above. Also the whole path is guarded by `CONFIG_ADD_VBT_DATA_FILE` which is always selected for nearly a year now. Change-Id: I7fc5184d6e81e4588616e0302dee410e74bdab5a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-07-20soc/intel/skylake: Fix broken memory info HOB scanningNico Huber
It looks like this code was written with completely different semantics in mind. Controllers, channels and DIMMs are all presented in their phy- sical order (i.e. gaps are not closed). So we have to look at the whole structure and not only the first n respective entries. Change-Id: I8a9039f73f1befdd09c1fc8e17cd3f6e08e0cd47 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20650 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-20soc/intel/common/smbios: Amend debug messageNico Huber
Change-Id: I6fcee760eb32b797430eb363ce0202557b74a126 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20649 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-20intel/common/block/i2c: Fix clock programming of i2cNaresh G Solanki
When configuring i2c frequency to I2C_SPEED_FAST_PLUS, observed frequency was I2C_SPEED_FAST. This was due to incorrect register programming. TEST= Build for Soraka, I2C frequency during firmware execution was I2C_SPEED_FAST_PLUS when configured for I2C_SPEED_FAST_PLUS. Change-Id: Ib0e08afe0e1b6d8c9961d5e3039b07ada9d30aa3 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-20soc/intel/apollolake: Implement _PIC method into ACPIMario Scheithauer
The _PIC method is called by the OS to choose between interrupt routing via the i8259 interrupt controller or the APIC. Change-Id: I2bc16f9c096c095c02de3692e76c0906cec54cb5 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-19soc/intel/cannonlake: Add minimal changes to call FSP MemoryinitLijian Zhao
The following minimal changes are needed to make system boot until FSP memoryinit got called. 1. Program SA BARs 2. Assume previous power state is S0. Change-Id: Iab96b27d4220acf4089b901bca28018eaba940a1 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-19rockchip/rk3399: Adjust gpio_t format to match ARM TFJulius Werner
Our structure packing for Rockchip's gpio_t was chosen arbitrarily. ARM Trusted Firmware has since become a thing and chosen a slightly different way to represent GPIOs in a 32-bit word. Let's align our format to them so we don't need to remember to convert the values every time we pass them through. CQ-DEPEND=CL:572228 Change-Id: I9ce33da28ee8a34d2d944bee010d8bfc06fe879b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-19soc/intel/cannonlake: Add microcode supportLijian Zhao
Microcode needs to be loaded prior to FSP initialization. Change-Id: Idd70bd3e6555866d9bb232e8904aed4120c79fe7 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20484 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-18vboot: Remove get_sw_write_protect_state callbackJulius Werner
We've just decided to remove the only known use of the VBSD_SW_WP flag in vboot (https://chromium-review.googlesource.com/c/575389), since it was unused and never reliable on all platforms anyway. Therefore, we can now also remove the coreboot infrastructure that supported it. It doesn't really hurt anyone, but removing it saves a small bit of effort for future platforms. Change-Id: I6706eba2761a73482e03f3bf46343cf1d84f154b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-18soc/intel/skylake: Enable SMBus based on mainboard configNaresh G Solanki
Enable SMBus controller based on config in mainboard devicetree.cb BUG=None TEST= Build for Soraka, Verify that SMBus is enabled or disabled (run lspci in OS) based on board devicetree.cb config 'SmbusEnable'. Change-Id: I04c8bc30c03fd8dc7cc8ae239885e740b09e9bc1 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-07-18soc/intel: Fix SPI driver compilation with CONFIG_DEBUG_SPIStefan Reinauer
write[8|16|32] wants volatile pointers, not const pointers. Change-Id: I92010516e8e01c870b60107e20a576a75d491e4e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13566 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-18soc/intel/cannonlake: Fix Build breakLijian Zhao
1.Replace outdated defination of TCO_EN to TCO_BASE_EN 2.Remove setmaxfreq() as not needed any more. Change-Id: Id54fdfd14f1abaa592132195e6f9acfa5807626e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-18soc/intel/cannonlake: Use common GPIO driverAndrey Petrov
Change-Id: I0bbdd641244f0c7baaa2146dcfde6431bde387c5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-18soc/intel/skylake: Remove Heci2 and Heci3 from wake resource listSubrata Banik
HECI2 and HECI3 devices are “function disable” during FSP Silicon Init phase. Device will not be visible over PCI bus hence removing these devices from wake source list. Change-Id: I0de665e039d74e49e5a22db9714bc9fee734e681 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-18soc/intel/cannonlake: Add PMC headersAndrey Petrov
Add register definitions used in PMC block. Change-Id: I963f402a59d49dfc7b76224f719a315e1cc6dc74 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20071 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-17soc/intel/common/gpio: clean up logical to chipset mappingAaron Durbin
1. Explicitly add LOGICAL to the reset macro name to make it explicit that the values are logical. 2. Reword some of the comments and combine them into single comment instead of scattering the comments throughout. 3. Use c99 struct initializers for the reset mapping array. 4. For the chipset specific values use literals that match the hardware. 5. Use 'U' suffixes on the literals so we don't trip up compiler being over zealous on undefined behavior. 6. Use unsigned and fixed-width types for the reset mapping structure since the code is reliant on matching up with a register definition. 7. Fix formatting that can fit < 80 cols. Change-Id: Iaa23a319832c05b8a023f6e45c4ee5ac06dd7066 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-17soc/intel/common/gpio: distingiush single vs multi acpi devicesAaron Durbin
Sadly, small core and big core are not aligned with the OS driver's expectation on the number of ACPI devices used for each community. Big core uses a single device while small cores use one ACPI device per community. Allow for this distinction within the common gpio implementation and ensure apollolake is utilizing the new option to retain the correct behavior. Change-Id: I7c7535c36221139ad6c9adde2df10b80eb5c596a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20588 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-07-17soc/intel/skylake: remove top_of_32bit_ram() declarationAaron Durbin
It should never be globally exposed. Remove the global symbol and make it static. Change-Id: I3b85f3bbf6a73d480cdefdcdec26e137e3a3f75f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-07-17soc/intel/cannonlake: remove top_of_32bit_ram() declarationAaron Durbin
It should never be globally exposed. Remove it. Change-Id: I90e201ddd4df2cda89e7d3e4cb81bdc2a81cac83 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-16soc/amd/stoneyridge:Fix IS_ENABLED() around Kconfig symbol referencesMartin Roth
- Update files that were added since the IS_ENABLED() fix patches - Remove extra XHCI controller. Change-Id: I7028942ce54b06cd048029f7b93f064beba579ad Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-16src/soc: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I2e7b756296e861e08cea846297f687a880daaf45 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-14soc/intel/skylake: Set PsysPL2 MSRShelley Chen
BUG=b:7473486, b:35775024 BRANCH=None TEST=On bootup make sure PL2 and PsysPL2 values set properly (through debug output) Change-Id: I847a8458382e7db1689b426f32ff2dcbc5a0899c Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-13soc/intel: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I3c5f9e0d3d1efdd83442ce724043729c8648ea64 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-13soc/intel/cannonlake: Add reset.cAndrey Petrov
Add reset functionality. This implementation relies on CSE to trigger global reset. Change-Id: I7e6ae07a48f1cdc3d2f4cdb74246627d27253adf Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13soc/intel/cannonlake: Add MakefileAndrey Petrov
This enables building working bootblock and non-functional romstage and ramstage. Change-Id: I580cd2c3279d742f202b2adfbe55c814cfb48f99 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13soc/intel/cannonlake: Add bootblock PCHAndrey Petrov
Add essential initialization needed for PCH in bootblock. Change-Id: I3694e099e78c2989f7192c550cbba098e5df2032 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13soc/intel/cannonlake: Add early CPU initializationAndrey Petrov
Add basic CPU initialization for bootblock, as well as relevant headers. Change-Id: I318b7ea0f3aa5b5d28bf70784ccd20f2fe28cd86 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13soc/intel/skylake: reduce postcar stack usage for fsp 2.0Aaron Durbin
The FSP 2.0 path uses postcar to decompress ramstage. Since postcar is entirely RAM based there's no need to have an excessively large stack for the lzma decompression buffer. Therefore, reduce the stack required to 1 KiB like apollolake. Change-Id: I45e5c283f8ae87e701c94d6a123463dddde3f221 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-12soc/intel/cannonlake: Add PCI dev macros and IDsAndrey Petrov
Change-Id: I287404f1615c6c0b441dd1b98a40e79919920a02 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-12soc/intel/cannonlake: Add report_platform.cAndrey Petrov
Dump basic platform information early in bootblock. Change-Id: I12d1c9dd9f0518c133de465a4db72a0664a94eef Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20068 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-12soc/amd/stoneyridge: Update header guards and includesMarshall Dawson
Rename the guard to better match the new directory structure. Add include files containing typedefs used in the file. Change-Id: I5fe23ce6994603b0ace99fd6ffc5f3eded2880af Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20525 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-12soc/intel/skylake: Remove “disable SaGv” in recovery mode flowSubrata Banik
This reverts commit 5535cead (intel/skylake: Disable SaGv in recovery mode). Commit 5535cead disables SaGv in recovery mode to save few seconds booting time as we were doing memory training on every recovery flow. Now we don't need to perform MRC training on every recovery boot due to RECOVERY_MRC_CACHE implementation in place. Hence we don't need to define different SaGv policy between Normal (developer) mode and recovery mode to save few seconds. Using different SaGv parameters between recovery and all other mode has some significent drawbacks over warm reboot cycle. We are seeing a MRC traning hang in eve/soraka/poppy devices with below use case. Step 1: Boot system in developer mode (first time RW_MRC training) Step 2: Set recovery_request=1 (using crossystem) and issue “reboot” from OS Step 3: System will perform recovery mode MRC training and boot to OS (first time RECOVERY_MRC training) Step 4: Issue “reboot” from OS console. Step 5: System wil boot in developer mode (using RW_MRC cache) Step 6: Set recovery_request=1 (using crossystem) and issue “reboot” from OS Step 7: System will pick RECOVERY_MRC_CACHE and will hang during MRC training. This patch fixes issue mentioned above and ensures system boot to OS without any hang if we change mode (dev<->recovery) over warm reset. BUG=b:63515071 BRANCH=none TEST=manual stress testing of dev<->recovery mode over warm boot. No MRC hang with this fix on eve/soraka/poppy devices. Change-Id: I8d094a8b6d78ea3bf8f929870a4a179495c29c78 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-12Revert "soc/intel/skylake: storage: Add 2ms delay before exiting D3"Subrata Banik
Don't need this additional 2ms delay as PCR read after sideband write help to fix original hard hang issue. This reverts commit d4b6ac19b0a6619ebe645875282643cc50cf7a3e. Change-Id: I4232cba5b92e17f728795f7c282af6161e385e9b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-12soc/intel/skylake: Perform PCR read after all PCR writeSubrata Banik
BIOS must ensure to read same PCR offset after PCR write operation is done. BUG=b:35587084 BRANCH=eve TEST=manual stress testing of D0<->D3 transition on eve failing unit. No hard hang with this fix. Change-Id: Id3d567aab517b16ff99a526fc29c2d71bf4042d0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-11soc/intel/skylake: Fix PMC address range setup for PCH-HNico Huber
The PMC of PCH-H requires a different destination id. TEST=Run on kontron/bsl6 and observed that PM registers are correctly dumped at start of romstage. Change-Id: I862e4df986f1cdea34f8fa45d016fb6b51f29122 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-11soc/intel/skylake: Set generic I/O decode ranges earlyNico Huber
Move the generic I/O decode range setup before the console init. TEST=Run on kontron/bsl6 which requires 0xa80/0xa81 decoded to initialize serial ports. Serial console works from boot- block on. Change-Id: I9829f188c80eb73f6cd91b0c22e1c07da5745ad6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-11binaryPI: Define AGESA blob in CBFS as Kconfig stringKyösti Mälkki
Change-Id: I0f78cb275ecad732f81c609564a0640f03d2559e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-07-10sgx: Move SGX code to intel/common/blockPratik Prajapati
CONFIG_SOC_INTEL_COMMON_BLOCK_SGX controls building. The SGX feature is still enabled from devicetree.cb. As of now this SGX init supports only KBL (SKL not tested). Support of SGX for new SOCs would be added incrementally in this common code base. Change-Id: I0fbba364b7342e686a2287ea1a910ef9a4eed595 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/20173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-08soc/amd/stoneyridge/northbridge.c: remove unnecessary null checkMartin Kepplinger
Checking for NULL here doesn't help here. We *rely* on cdb_dev to exist directly before this check. Coverity had found this: *** CID 1376664: Null pointer dereferences (REVERSE_INULL) /src/soc/amd/stoneyridge/northbridge.c: 666 in cpu_bus_scan() 660 * this silicon. It is an SOC and can't have >= 16 APICs, but 661 * we will start numbering at 0x10. We also know there is only 662 * on physical node (module in AMD speak). 663 */ 664 665 lapicid_start = 0x10; /* Get this from devicetree? see comment above. */ CID 1376664: Null pointer dereferences (REVERSE_INULL) Null-checking "cdb_dev" suggests that it may be null, but it has already been dereferenced on all paths leading to the check. 666 enable_node = cdb_dev && cdb_dev->enabled; 667 cpu_bus = dev->link_list; 668 669 for (j = 0; j <= siblings; j++ ) { 670 apic_id = lapicid_start + j; 671 printk(BIOS_SPEW, "lapicid_start 0x%x, node 0x%x, core 0x%x, apicid=0x%x\n", Change-Id: Ic6a53df8b8d1596ad0eb1d8f0fa200cccf9509cf Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/20415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-03soc/intel/quark: Add I2C debuggingLee Leahy
Add I2C debugging support: * Add I2C_DEBUG Kconfig value to enable debugging * Display I2C segments before the transfer * Display errors that occur during the transfer * Display the number of bytes transferred for successful transfers TEST=Build and run on Galileo Gen2 Change-Id: Ia17be8b4213b13fd6c6a367d081414d0f21fbb0f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-07-03soc/intel/apollolake: Use common gpio for apollolakeHannah Williams
No regression observed on a APL platform Change-Id: I0fcc22df5eaec014f3b89755415f051b05aa554a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-02soc/intel/quark/spi.c: Explain a read in order to flush buffersMartin Kepplinger
In order for this (seemingly unnecessary) status assignment to stay, let's explain it in a comment. Change-Id: I0a364539c37005cfd637b75c8cc23b84e274294d Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/20411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-02soc/intel/cannonlake: Add bootblock.cAndrey Petrov
Change-Id: Ia951a466479b1e98e49895705162a66aece7609b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-02intel/block/cse: Add Cannon Lake SoC PCI device IDAndrey Petrov
Change-Id: Ida822d704b04cc4d1dfffb58003fc308bcb502d0 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-07-02soc/amd/common: Add initial support for AMD PSPMarshall Dawson
Add files for supporting the BIOS->PSP communication not covered by AGESA. The first command implemented notifies the PSP that DRAM is ready. This patch also introduces the amd/common/block directory structure similar to intel/common/block. Change-Id: I34b2744b071aa3dfb1071b2aabde32ddb662ab87 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-01soc/intel/skylake: Remove unnecessary P-State and Flex Ratio assignmentBarnali Sarkar
This patch basically does two things - 1) Remove unnecessary setting of flex_ratio to TDP nominal: Factory configured (default) Max Non-TURBO ratio(P1) is already cofigured in MSR_PLATFORM_INFO(0xCE). If this Maximum Non-TURBO Ratio(P1) needs to be modified, it should be done using MSR_FLEX_RATIO (0x194). Here, in this code, the FLEX_RATIO is being modified by the TDP Nominal Ratio, reading the MSR_CONFIG_TDP_NOMINAL(0x648). But this value is actually less than the factory configured Maximum Non TURBO Ratio (P1). So, this code is actually not required. Also, the Bit 12 in PCH Soft Strap Register is already set in descriptor. This Bit implies Processor Boot Max Frequency - 0 = Disable Boot Max Frequency 1 = Enable Boot Max Frequency (Default) This setting determines if the processor will operate at maximum frequency at power-on and boot. Thus this patch will avoid one extra platform warm reset now onwards. 2) Remove wrongly setting Max Frequency in Bootblock phase: In the function set_max_frequency(), the P-State max ratio was set to TDP Nominal ratio if C-TDP was enabled, else it was set to Max Non Trbo ratio. But, when the cpu gets reset, it will operate with the Max-Non Turbo ratio only, which is greater than the TDP Nominal ratio. So, no need to set back the ratio to TDP Nominal which is lower than the currently operating frequency. BUG=none BRANCH=none TEST=Build and boot poppy Change-Id: I24bfc86ddf0f038d85da938e41e950382fe2a6c3 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/intel/skylake/Kconfig: Drop useless FSP1.1/2.0 promptsNico Huber
There is no choice, if not leaving it with the default the build will fail. Change-Id: Id91e3ce87f8ced3001fcd2125f8f6781b270f5bc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/intel/cannonlake: Add UART initializationAndrey Petrov
Cannonlake has built-in UART driver as part of LPSS block. However port mapped decoders are in use as well. Change-Id: I9f209bf29c1748c5beea31bc6b31cb07a1e14195 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29arch/x86: update assembly to ensure 16-byte alignment into CAaron Durbin
When the C compiler expects 16-byte alignment of the stack it is at the call instruction. Correct existing call points from assembly to ensure the stacks are aligned to 16 bytes at the call instruction. Change-Id: Icadd7a1f9284e92aecd99c30cb2acb307823682c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-29soc/intel/common/block/gpio: Port gpio code from Apollolake to commonHannah Williams
Change-Id: Ic48401e92103ff0ec278fb69a3d304148a2d79aa Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/intel/cannonlake: Add initial dummy directoryLijian Zhao
Add Cannon Lake SoC boilerplate directory with: * SoC directory * Base Kconfig * Dummy cbmem.c Change-Id: Ie28d8b56a1d1afcf1214ef734a08be6efcc8a931 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/amd/stoneyridge: Convert monotonic timerMarshall Dawson
Use the TSC for the Stoney Ridge monotonic timer. Modern AMD CPUs have invariant timestamp counters. This patch brings the feature more in line with other devices and allows the use of typical monotonic timer functions. BUG=chrome-os-partner:62578062 Change-Id: I07b05fbc7cdea54a45daac01954284a9fd67e42f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28soc/amd/stoneyridge: Revise pci_devs.h fileMarshall Dawson
Now that pci_devs.h is part of soc/ and not used for multiple southbridges: * Remove devices not present in the Stoney Ridge APU * Complete the list to include additional devices besides those in the FCH. BUG=chrome-os-partner:62578372 Change-Id: I1cd2d5e41473f362bbfd28ee93788a292bc33991 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20370 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28soc/amd/stoneyridge: Fix device IDsMarshall Dawson
Update pci_devs.h to the correct IDs for Stoney Ridge. BUG=chrome-os-partner:62578372 Change-Id: Ic1a7fe8d95c34b80e21cc089168732372d9690a3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20200 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28soc/amd/stoneyridge: Enable early cbmemMarshall Dawson
Add a memmap file with a cbmem_top() function. Remove the LATE_CBMEM_INIT, allowing the default of EARLY. Remove calls to the late-only set_top_of_ram() function. Change-Id: I11ad7190031c912642a7312f2fc6f792866288b7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/stoneyridge: Add tseg size to KconfigMarshall Dawson
Add a SMM_TSEG_SIZE symbol that can be used in top of memory calculations. Change-Id: I26f3b06f85f0cf5613656c1d5df55bd9ea4bbbbc Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19750 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-27soc/stoneyridge: Remove IDE controllerMarshall Dawson
Remove IDE from the Stoney Ridge source. This APU doesn't have an IDE controller. The support was left over from pi/hudson. BUG=chrome-os-partner:62580062 Change-Id: I7316c113a7464089ccfbea6b6cf69787940b9e97 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/stoneyridge: Remove FCH PCIe supportMarshall Dawson
Remove the pcie.c file. Historically PCIe lanes have been available from the Gfx and/or the FCH. The integrated FCH in this APU has no PCIe available. BUG=chrome-os-partner:62580062 Change-Id: Ie89383dadfaa57c5a6d185e74551ae50ac8d9778 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27soc/amd/stoneyridge: Remove PCIe-PCI bridgeMarshall Dawson
The Stoney Ridge does not contain this bridge like some of the older Hudson FCHs. Remove this support from the source. This moves the Stoney Ridge IRQ setup to the southbridge file, hudson.c. BUG=chrome-os-partner:62580062 Change-Id: I8f974ba76b8c20f4335dd8872eaf4b8172188ee2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/common: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. Some of the lines requiring a >80 break are indented too much currently. Changes to agesawrapper.c cause the build to change, so this file is also left as-is. Make hex values consistently lower-case. BUG=chrome-os-partner:622407746 Change-Id: I0464f0cafac4ee67edc95d377dcf7aab9a90c66b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/stoneyridge: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. (Some of the lines requiring a >80 break are indented too much currently.) Some of the alignment in hudson.h still causes checkpatch errors, but this is intentionally left as-is. Also make other misc. changes, e.g. consistency in lower-case for hex values, using defined values, etc. These changes were confirmed to cause no changes in a Gardenia build. No other improvements were made, e.g. changing to helper functions, or converting functions like __outbyte(). BUG=chrome-os-partner:622407746 Change-Id: I768884a4c4b9505e77f5d6bfde37797520878912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/stoneyridge/acpi: Fix checkpatch errorsMarshall Dawson
Correct the checkpatch errors reported in the asl files and make other stylistic modifications. These changes were confirmed to cause no changes in a Gardenia build. BUG=chrome-os-partner:622407746 Change-Id: Id8b2620d161062c444e493325d83bb158705b76b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27vendorcode/amd: Unify Porting.h across all targetsStefan Reinauer
This requires to also unify the calling convention for AGESA functions from AGESA_STATUS (*agesa_func)(UINT32 Func, UINT32 Data, VOID *ConfigPtr) to AGESA_STATUS (*agesa_func)(UINT32 Func, UINTN Data, VOID *ConfigPtr) On systems running 32bit x86 code this will not make a difference as UINTN is uintptr_t which is 32bit on these machines. Change-Id: I095ec2273c18a9fda11712654e290ebc41b27bd9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-06-27soc/intel/common/opregion: Use enum cb_err as return valuePatrick Rudolph
Return CB_SUCCESS and CB_ERR instead of some integer. Preparation to merge intel/soc and intel/nb opregion implementations. Change-Id: Ib99fcfe347b98736979fc82ab3de48bfc6fc7dcd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/intel/quark: We're not Broadwell anymoreStefan Reinauer
... even though the author of the code probably wished he was working on a (much faster) broadwell system instead. Let's fix the header guard to reflect the right SOC. Noteworthy: clang detected that this was wrong. Change-Id: I74c217c0471800f40c31a9ac38ba5396f82cd724 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27soc/intel/skylake: storage: Use word access for power state registersDuncan Laurie
In the D0 and D3 ACPI methods use word access to the PME status and control register. This brings the code inline with the Intel reference code and matches how the kernel handles access to this register. BUG=b:35587084 BRANCH=eve TEST=manual stress testing of D0<>D3 transition across multiple devices Change-Id: I53f7465d6ad5da1780a5641ff52056445ebaca8b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-27soc/intel/skylake: storage: Add 2ms delay before exiting D3Duncan Laurie
For the skylake/kabylake generation of PCH there is an ACPI workaround for emmc/sd power state that involves disabling and re-enabling dynamic clock gating after enabling power to the controller, before setting the power state to D0. Under certain conditions we have observed that the controller is not powered and ready by the time the kernel attempts to read the PME control and status register and so the system will hang while attempting to read PCI config register 0x84. To ensure that the controller is ready add a 2ms delay after re-enabling dynamic clock gating and before setting the power state to D0. This issue has been observed on eMMC, but the same workaround exists for the SD card interface so the same delay is added there. BUG=b:35587084 BRANCH=eve TEST=manual stress testing of D0<>D3 transition across many devices shows no hard hang after 2 days. Change-Id: If0f0323cf5437c54c907c332937b5de9dda2d8f6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-26soc/intel/fsp_baytrail/include/soc/pci_devs.h: Add brackets around macroElyes HAOUAS
Code checked manually Change-Id: I91ababb3bf7aa1ab0f71bb005c4685e81bb4d92f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add northbridge supportMarc Jones
Copy northbridge files from northbridge/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. Changes: - update chip_ops and device_ops - remove multi-node support - clean up Kconfig and Makefile Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add CPU filesMarc Jones
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. This is the second patch in the process of converting Stoney Ridge to soc/. Changes: - update Kconfig and Makefiles - update vendorcode/amd for new soc/ path Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc: Add AMD Stoney Ridge southbridge codeMarc Jones
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26rockchip/rk3399: update the ddr 200MHz frequency configurationCaesar Wang
This patch updates the coreboot DDR Settings to match the configuration used by ARM-Trusted-Firmware. Change-Id: I34bc2950a9708ac89a5637bf682551e03d993fcc Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/20304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-06-23soc/intel/skylake: Remove post SMM Relocation uCode loadingBarnali Sarkar
As per latest BWG, ucode reloading should be done at the end of Mp Init, i.e., after PRMRR and other features are enabled. No reloading specifically after SMM Relocation is required. As, in the Common CPU MP Init code, we are already doing a uCode load at the end of MP Init Feature Programming, hence, the uCode loading after SMM relocation can be removed. Change-Id: Ib1957c5fe5a8c83bb20b978a9841670b0c3e8846 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-23soc/intel/skylake: Use CPU MP Init Common codeBarnali Sarkar
This patch uses the common CPU Mp Init code. BUG=none BRANCH=none TEST=Build and boot poppy Change-Id: Ieb2f8ae25a31e86e9251fe97859678745fe610f5 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-23soc/intel/common/block: Add common MP Init codeBarnali Sarkar
This patch contains State Machine callbacks init_cpus() and post_cpu_init(). Also, it has the SOC call for CPU feature programming. Change-Id: I5b20d413c85bf7ec6ed89b4cdf1770c33507236b Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-22soc/rdc: Remove r8610 SoCMartin Roth
Bifferboard was the only board that used this chip, and it has now been removed. Removing the chip as well. If there is desire to continue work on the board, it can be found in the 4.6 branch. Change-Id: I33a1e713cdfea47abce71b79f0a9c93562c96d12 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-20soc/intel/common: Add SMM common code for Intel PlatformsBrandon Breitenstein
SMI code is very similar across Intel platforms. Move this code to common/block/smi to allow it to be shared between platforms instead of duplicating the code for each platform. smihandler.h has already been made common so all it will contain is name changes and a move to the common block location. Due to moving smihandler code, APL changes are bundled here to show this change. Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/19392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-20soc/intel/quark: Add legacy SPI flash controller driverLee Leahy
Add SPI driver code for the legacy SPI flash controller. Enable erase and write support allowing coreboot to save non-volatile data into the SPI flash. TEST=Build and run on Galileo Gen2. Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
The differential signal of DQS needs to keep low level before gate training. RPULL will connect 4Kn from PADP to VSS and a 4Kn from PADN to VDDQ to ensure it. But if it has PHY side ODT connected at this time, it will change the DQS signal level. So it needs to disable PHY side ODT when doing gate training. BRANCH=None BUG=None TEST=boot from bob Change-Id: I56ace8375067aa0bb54d558bc28172b431b92ca5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: cb024042c7297a6b17c41cf650990cd342b1376f Original-Change-Id: I33cf743c3793a2765a21e5121ce7351410b9e19d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/448278 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/18582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16soc/intel/skylake: Use SCS common codeBora Guvendik
This patch uses common SCS library to setup sd card. Change-Id: I06898e30a9b39f169b35f581a3ee09238f0f40c4 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/20217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-16soc/intel/apollolake: Use SCS common codeBora Guvendik
This patch uses common SCS library to setup sd card. Change-Id: Iafbba04d7a498b9a321e8efee4abf07820d17330 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19632 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-16soc/intel/common/block: Add Intel common SCS code supportBora Guvendik
Create Intel Common SCS code. This code currently only contains the code for SD card SSDT generation. More code will get added up in the subsequent phases. Change-Id: I82f034ced64e1eaef41a7806133361d73b5009d3 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19631 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-16soc/intel/common/block/cse: Add GLK PCI IDHannah Williams
Change-Id: I88e376d61c4aba5030a0be7c8bdfe7b57881a197 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/20169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-16soc/intel/braswell: Hide some Kconfig options in menuconfigArthur Heymans
Don't allow the user to set PCIe configspace base address. Don't allow the user to set the DCACHE size and base. Change-Id: I7a42cc5f6098214364624bcfa3cbd93b4903ee84 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-16soc/intel/skylake: Don't allow user to change DCACHE base and sizeArthur Heymans
Change-Id: Ic1656311ecc670dc0436995f0ec8199d270da4d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-16src/soc/intel: Don't allow user to select PCIe config mmio sizeArthur Heymans
Change-Id: I8b2794f56f39492589a08e5676cb33eec89a976e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20179 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 12:24:15 +0000