Age | Commit message (Collapse) | Author |
|
Use a local variable for the ResourceTemplate in the _CRS methods
instead of the RBUF object. When using RBUF, iasl complained that the
_CRS methods need to be serialized, since objects were created in there.
Since those are only used as local variables, just use local variables
for this.
TEST=iasl stops complaining about those methods not being serialized and
Linux still boots and there aren't any related ACPI errors or warnings.
Change-Id: Ic43fcaed5a8b19dbd5634c17f34a159803ba8577
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The Connect Topology Command(CNTP) is sent with default timeout value
(0x1388) along with FW CM. The CNTP is supposed to be skipped while
using SW CM. While transition from FW CM to SW CM, the default timeout
value could cause boot time delay up to ~10 seconds. Set this FSPS UPD
ITbtConnectTopologyTimeoutInMs to be 0 in order to avoid the 10 seconds
delay. Future FSP release will evaluate this ITbtConnectTopologyTimeoutInMs
value. While FSP finds this UPD value being 0, FSP will skip sending CNTP.
BUG=b:155893566
TEST=Built image with SW CM Thunderbolt firmware and verified no
outstanding delay time while using FSP v3197 during boot to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I47e3519fd818cb56e6abd16464d8370ffddabc5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42056
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With SoundWire and USB4 enabled some boards are running out of
memory with all of the ACPI devices and properties. Increase
the heap size to accommodate.
BUG=b:147462631
TEST=Successfully boot on volteer SKU5 board with SoundWire enabled,
before boot was failing with "Error! memalign: Out of memory"
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I0245bdfad93b381871514578e66640e7fe6fa5c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Use x86_setup_mtrrs_with_detect_no_above_4gb() to only
solve the MTRR solution for memory up to 4GiB. This assumes
4GiB to TOM2 is marked as writeback in sys_cfg MSR.
BUG=b:155426691
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ib8358b614682f6a97278f3a60b5ada5e607965af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41898
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AGESA FSP-M implementation is now not updating MTRRs out from
under the caller. As such, remove the save/restore of MTRRs
from the FSP-M call.
BUG=b:155426691
Change-Id: I14f3b18dd373ce17957ef3857920e1c4e2901bbe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The PSP does the memory training and setting up of MSRs for
TOP_MEM and TOM2. Set caching up for all the DRAM areas:
Enable WB caching for 1MiB->TOP_MEM, 4GiB->TOM2.
Enable WC caching fro 0->1MiB except 0xa0000->0xc0000.
BUG=b:155426691
Change-Id: I83916a220ea4016d4438dd4fb5be82dec5506f80
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
As per JEDEC spec, manufacturer part name should be set to
blank (0x20). This change updates gen_spd.go to set bytes 329-348 as
0x20 and regenerates SPDs for TGL and JSL.
Change-Id: I6af18d89afd7264cec7e54b38e95df83d55aa058
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42023
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the boards do not select SYSTEM_TYPE_LAPTOP or _CONVERTIBLE
so their FADT preffered_pm_profile would change from PM_MOBILE without
the added overrides here.
Change-Id: I04b602b2c23fbd163fcd110a44ad25c6be07ab66
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41920
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates gpio_op.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for Volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib54b3f7da828ce8d232fcea0639077970638f610
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Explain why the flash is no longer cached.
BUG=none
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibb18f363a215d665d53a722ed76896a75d1c5608
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42108
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change allows treating the PMC as a 'hidden' PCI device on Jasper
Lake, so that the MMIO & I/O resources can be exposed as belonging to
this device, instead of the system agent and LPC/eSPI.
Change-Id: Ie07987c68388d03359c43f64a849dc6e3f94676e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I9025ca3b6b438e5f9a790076fc84460342362fc2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41919
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iad7e7af802212d5445aed8bb08a55fd6c044d5bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41916
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While working on psp_verstage, I noticed that this file had a number of
unnecessary includes. Remove them.
BUG=b:158124527
TEST=Build & boot psp_verstage on trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I32188e2dda39ece9dc98d0344824d997a2e80303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change adds device_operations for UART MMIO devices that provides
following operations:
1. uart_acpi_name: Returns ACPI name of UART device. Generation of
UART device node is not yet moved to SSDT, but will be done in
follow-up CLs.
2. scan_bus: Uses scan_static_bus to scan devices added under the UART
devices. This allows mainboard to add devices under the UART MMIO
device.
Change-Id: I18abbe88952e7006668657eb1d0c177e53e95850
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I3f08b9cc34582165785063580b3356135030f63e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
|
|
This is a standard MSR. No reason for picasso to define its own.
BUG=b:147042464
TEST=Boot to OS on trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idcfae356d35ff08ced4b7e5ccfc132a8492a6824
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42087
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't use amd_setup_mtrrs, bsp_topmem or bsp_topmem2 in picasso.
BUG=b:147042464
TEST=Boot to OS on trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1941934975dfea4f189347811b003a33996c887a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I1632d03a7a73de3e3d3a83bf447480b0513873e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41685
Reviewed-by: David Guckian
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reference:
- TGL User Guide #613584 Rev 2.2
- TGL User Guide #605534 Rev 1.0
BRANCH=none
BUG=none
TEST=build and boot tglrvp
Change-Id: I5da80fd4ad321b1ded369c2b6c039b73fcb3773e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41516
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for TGL and JSL:
1. MT53E512M32D2NP-046 WT:E
2. K4U6E3S4AA-MGCR
3. H9HCNNNCPMMLXR-NEE
4. K4UBE3D4AA-MGCR
BUG=b:157862308, b:157732528
Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that
can be used with JSL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating
SPD binary to add to CBFS.
Change-Id: Ic52506b809c66b9f7cf25a100a959d85c67addf2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41876
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that can be
used with TGL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating SPD
binary to add to CBFS.
BUG=b:147321551,b:155239397
Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Advertising SMI triggers in FADT is only valid if we exit with
SMI installed. There has been some experiments to delay SMM
installation to OS, yet there are new platforms that allow some
configuration access only to be done inside SMM.
Splitting static HAVE_SMI_HANDLER variable helps to manage cases
where SMM might be both installed and cleared prior to entering
payload.
Change-Id: Iad92c4a180524e15199633693446a087787ad3a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Ifb4f99c11a72e75ec20b9faaf62aed5546de91fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41909
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set up cpus:
* setup apic IDs.
* setup MSR to enable fast string, speed step, etc.
* Enable turbo
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I5765e98151f6ceebaabccc06db63d5911caf7ce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but
turned out to be correct.
Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function set_mmio_dev_ops() in chip.c which
is used for setting the dev->ops for MMIO devices based on the
comparison of MMIO address in device tree to the pre-defined base
addresses in iomap.h.
Call to i2c_acpi_name() is replaced with set_mmio_dev_ops and scope of
i2c_acpi_name is restricted to i2c.c since it is not required to be
exposed out of that file.
Change-Id: I31f96cfe8267b0df37012baeb7cfcaec9c2280f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
If AMD_PUBKEY_FILE contains an absolute path the resulting path is
incorrect since it contains $(top).
BUG=b:147042464
TEST=Build trembyle with absolute and relative path.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib46b1799fad5588a18411f8c32541192d699cdd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add PCIe enumeration and resource assignment/allocation.
Xeon-SP processor family has split IIO design, where PCIe domain 0 is
split into multiple stacks. Each stack has its own resource ranges (eg.
IO resource, mem32 resource, mem64 resource). The stack itself is not
PCIe device, it does not have config space to be probed/programmed.
The stack is programmed by FSP. coreboot needs to take into account of
stack when doing PCIe enumeration and resource allocation.
Current coreboot PCIe resource allocator does not support the concept of
split IIO stack, thus entire support is done locally in this patch.
In near future, improvements will be done, first generalize for xeon-sp,
then generalize for coreboot PCIe device code.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: If461b1dc1f313d98b676dc9e91d08a1dbb9cb388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
offsets for ACPI_PM are incorrectly configured for picasso SoC.
Especially incorrect ACPI_PM_TMR_BLK makes kernel to spend 10 sec for
trying to testing it on wrong address.
Fix them to correct offset with hack for GPE0_BLK.
BUG=b:147044624
TEST=build and boot on trembyle; PM Timer error is gone
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6adf71479c30f5b6751a21edc4bfa311ddbef5ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia4508a9a087e3996ef7667280f8e2788421e5700
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I263c159fe4b7757dd5abfc0d6248e45b749df980
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6a066659758aeb0251d9b37f525ad987b90832db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41787
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Update C-States max latency values
- Remove MSR programming for C-States latency
BRANCH=None
TEST=Boot to OS and check CState Latenecy
>cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency}
POLL
C1_ACPI
C2_ACPI
C3_ACPI
0
1
253
1048
Change-Id: I05c0b5b31d1883f72ca94171aa1b536621e97449
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40902
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibe9752a3f09e8944f7fbcf385b83faae95a7cd9b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1731313798a4aadcbc17808bfe02b50bf8bd41db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I78f091e0d3d17fcfc60cd54721b34d143cbe2d86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
BUG=b:154756391
TEST=Boot trembyle and see that /dev/mmcblk1 now exists
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ica83b78a7ab081d9eac9f5e267b2904dcde0b283
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Modify the FCH ACPI devices to query the PCI IRQ mapping registers for
their current IRQ numbers.
BUG=b:139429446, b:154756391
TEST=Boot trembyle and see that I2C and UART devices are finally
functional.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8f2035f74240ead4089ff4d503dfbeb447cf8de4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The config option APL_SKIP_SET_POWER_LIMITS was accidentally left out
during the set_power_limits refactor (SHA 2adb50d32e8). This patch
reinstates the config option which will cause APL boards to not set any
power limits.
TEST=util/abuild/abuild -p none -t siemens/mc_apl1 -a
Change-Id: Iec9f9f340d50a1212b6ef20c2c0e1b66385ae1b2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Call out the CSME-initiated bits from HPR_CAUSE0 register and
update the elog to include reset causes
Change-Id: I32ffb55ff2ad26ec4e7609c41fc65e021a327a14
Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Right now all FSP2.0 based IA platform doesn't need this driver anymore
hence removing to avoid debug and maintenance effort.
TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms.
Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AGESA FSP provides additional ACPI tables that are required.
BUG=b:133337564, b:153675915
TEST=Boot trembyle to OS and dump ACPI tables.
ACPI: added table 2/32, length now 44
ACPI: * MCFG
ACPI: added table 3/32, length now 48
ACPI: * TPM2
TPM2 log created at 0xcc513000
ACPI: added table 4/32, length now 52
ACPI: * MADT
ACPI: added table 5/32, length now 56
current = cc635af0
Searching for AGESA FSP ACPI Tables
ACPI: * SSDT (AGESA).
ACPI: added table 6/32, length now 60
ACPI: * CRAT (AGESA).
ACPI: added table 7/32, length now 64
ACPI: * ALIB (AGESA).
ACPI: added table 8/32, length now 68
ACPI: * IVRS (AGESA).
ACPI: added table 9/32, length now 72
ACPI: * HPET
ACPI: added table 10/32, length now 76
Copying initialized VBIOS image from 0x000c0000
ACPI: * VFCT at cc63ca30
ACPI: added table 11/32, length now 80
ACPI: done.
ACPI tables: 102048 bytes.
[ 0.042326] ACPI: Early table checksum verification disabled
[ 0.048621] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
[ 0.055011] ACPI: XSDT 0x00000000CC6310E0 00007C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.064506] ACPI: FACP 0x00000000CC634850 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.073998] ACPI: DSDT 0x00000000CC631280 0035CF (v02 COREv4 COREBOOT 00010001 INTL 20200110)
[ 0.083488] ACPI: FACS 0x00000000CC631240 000040
[ 0.088623] ACPI: SSDT 0x00000000CC634970 00103D (v02 COREv4 COREBOOT 0000002A CORE 20200110)
[ 0.098114] ACPI: MCFG 0x00000000CC6359B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.107606] ACPI: TPM2 0x00000000CC6359F0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.117100] ACPI: APIC 0x00000000CC635A40 0000A6 (v03 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.126592] ACPI: SSDT 0x00000000CC635AF0 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.136082] ACPI: CRAT 0x00000000CC636C90 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.145573] ACPI: SSDT 0x00000000CC6374A0 005419 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.155064] ACPI: IVRS 0x00000000CC63C8C0 000126 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.164556] ACPI: HPET 0x00000000CC63C9F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.174047] ACPI: VFCT 0x00000000CC63CA30 00D469 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic1e87c0f7a7c736592dd8c5c6765ef9a37ed7a40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41804
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RP configuration settings like Advanced Error Reporting(AER),
Latency Tolerence Reporting (LTR), Max Payload and Active State Power
Management (ASPM).
Tested on CFL platform
Change-Id: Ifaf0cc86ea412ce246723613f99908946d89ccb0
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41679
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I76ec29210ecdde728ce55531d2b6657be87ce9da
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates gpio_op.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I3ec442ad85f408135642a112873231ce7d39524e
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates pch_hda.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I8e965560518decbfafabe9ac06066d28d59240d0
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates scs.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: Ic1b5f3395a1ea8a3dd2ac6b109f9a5abe65d137f
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates platform.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: Ie55bcd9ac2ca746c046ebe05140b2ac291fb0459
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Update Cooperlake-SP (CPX-SP) FSP header files to WW20 release.
As CPX-SP FSP engineering is on-going (the processor Mass Production
is some time in this year). These header files will be adjusted when
changes are necessary with newer FSP release. This commit corresponds
to FSP release WW20 (tag WHITLEY.0.PRB.0016.D.65).
Also update soc/xeon_sp code file and Skylake-SP header file accordingly
to use FsptPort80RouteDisable instead of PcdPort80RouteDisable.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I8bc6882e47de23d83ba0f521bb12a10dace523ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP Tioga Pass.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I5e1de8bcb651fb8ae8b106db1978235b0dd84c47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40523
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cbfs.h>' -- src/) <(git grep -l 'cbfs_boot_map_optionrom\|cbfs_boot_map_optionrom_revision\|cbfs_boot_locate\|cbfs_boot_map_with_leak\|cbfs_locate_file_in_region\|cbfs_boot_load_file\|cbfs_load_and_decompress\|cbfs_prog_stage_load\|cbfs_boot_region_device' -- src/) |grep '<' |grep -v vendorcode
Also add missing 'include <cbfs.h>' in src/soc/qualcomm/sc7180/qupv3_config.c
Change-Id: Icaecb5b910888f34cddedab7b2f64eaf6d01ad66
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41682
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ica355292eeda9c386b49db97f021566d52943d40
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I07100361705ce421131b8a5d772cb5ba2d8722ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41672
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I658023f7c3535a2cddd8e11ca8bebe20ae53ffb0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41670
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6dd004b417c27ff0b9f7e55557a9670f927d425c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ide01a922d7d8e500f9a0b507544010706661d7de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40690
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop unused includes and add missing <intelblocks/systemagent.h>.
Change-Id: I06c8b2bf65283c3c1fcd25fdaae298b82fc0e09c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also, replace 'lapic.h' by 'lapic_def.h' in 'soc/intel/braswell/northcluster.c'.
Change-Id: I71cff43d53660dc1e5a760ac3034bcf75f93c6e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41489
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI bar was not programmed previously for which is needed to enable SMI's and
to check SMI status registers. The architecture of Lewisburg PCH is very
similar to SunrisePoint PCH thus we can use code from soc/intel/skylake.
TEST=build for Tiogapass and check ACPI base. Log message will now show
pmbase=501 (bit 0 is enable) instead of 0. Check by reading and writing
to io port 0x500.
Change-Id: If5a0c4daabf5c35dc2852434fe46712ac9b06379
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
BUILD_TIMELESS=1 with ocp/tiogapass results in identical binaries.
Change-Id: Iff97f3cc0ce800036be32b2758c60e4b7ac39fe9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I23ca0c50b0b3c71710173b84d98c2e170ed3e45b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40842
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement triggering recovery mode for CSE Lite SKU runtime errors. Also,
define recovery subcodes for various possible Lite SKU runtime errors.
BUG=b:153520354
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib7744fc4fd0e41804d9b45079bf706b300220c62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I8877a70661cacc57ea893da172d9a4b6d19ba06a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This change updates pch_hda.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for Volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ia2bab6dcbac9eae76ac4258c44bb19425c8b5c80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: I6370e4b268331bfba5bc0392f27c560836b6ea72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Determine the TcssDma0 and TcssDma1 enabling based on TBT DMA
controllers setting.
BUG=:b:146624360
TEST=Booted on Volteer and verified TcssDma0 and TcssDma1 enabling.
lspci shows TcssDma0(0d.2) and TcssDma1(0d.3).
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I61ac4131481374e9a2a34d1a30f822046c3897fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41812
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables LZMA compression for both FSP-M and FSP-S. This
results in significant savings in the FSP size in each CBFS:
cbfstool firmware/image-trembyle.bin print -r COREBOOT | grep fsp
fspm.bin 0x9cdc0 fsp 132404 LZMA
(720896 decompressed)
fsps.bin 0xbdfc0 fsp 86146 LZMA
(327680 decompressed)
LZ4 works too, but the savings are smaller as compared to LZMA:
cbfstool firmware/image-trembyle.bin print -r COREBOOT | grep fsp
fspm.bin 0x9cdc0 fsp 189530 LZ4
(720896 decompressed)
fsps.bin 0xcbfc0 fsp 118952 LZ4
(327680 decompressed)
BUG=b:155322763,b:150746858,b:152909132
TEST=Verified that Trembyle boots to OS. No FSP-M or FSP-S errors in
boot logs.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ie5e4d58e671e936aa525d3000f890e9e5ae45ec3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
On Picasso, DRAM is up by the time FSP-M runs. This change relocates
FSP-M binary to a specific address (0x90000000) in DRAM. Currently,
this address is randomly chosen to ensure it does not overlap any of
the other stages. Once we have a unified memory map set up for
Picasso, this address can be updated along with it.
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I1a49765f00de9f97fa3dbd5bc288a3ed0d7087f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41828
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ChromeOS EC is adding new entries to its USBC.CONx devices (see later
patch), and it needs to get access to the PMC.MUX device so that its
ACPI path can be retrieved. This provides a weak function to return NULL
for all Intel SoCs except for Tiger Lake, which locates the device if it
is found in the devicetree.
Change-Id: I3fe3ef25e9fac8748142f5b1bd870c9bc70b97ff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40948
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At least some Pollock engineering samples return FP5 socket type while
they are in fact FT5 socket type.
Change-Id: I06a19c19374532bfb367fc15c734707d8c7f65a3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41796
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
soc_is_pollock() and soc_is_picasso() aren't used by any mainboard or
soc code. The same fuctionality is still provided by get_soc_type().
Change-Id: I046b4925bfeb4b31d11e2548ac87b7bbca0f6475
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41795
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In an attempt to help reduce the amount of static ASL files that are
littered throughout the codebase, pmc.asl was converted to runtime SSDT
generation instead. If future SoCs reuse the same PMC, then this
function can be moved to soc/intel/common/block/pmc for example.
TEST=Verified the following was in the decompiled SSDT:
Scope (\_SB.PCI0)
{
Device (PMC)
{
Name (_HID, "INTC1026") // _HID: Hardware ID
Name (_DDN, "Intel(R) Tiger Lake IPC Controller")
Name (_CRS, ResourceTemplate ()
{
Memory32Fixed (ReadWrite,
0xFE000000, // Address Base
0x00010000, // Address Length
)
})
}
}
Also the following found in linux's /var/log/messages:
"acpi INTC1026:00: GPIO: looking up 0 in _CRS", indicating the PMC
ACPI device was found and its _CRS was locatable.
Change-Id: I665c873d8a80bd503acc4a9f0241c7a6ea425e16
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch will disable PAVP UPD, which is by default enabled in FSP.
BUG=b:155595624
BRANCH=None
TEST=Build, boot JSLRVP, Verified UPD values from FSP log
Change-Id: I8e103ad11ae6ffa6b9efe4bf249bbe344bc10a30
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41763
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current implementation returns the incorrect GPIO community PID.
The GPIO community index 3 should return PID for COMM_4 and index
4 should return PID for COMM_5.
TEST=Verify GPIO PM bits are correctly set through MS0x ACPI method.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I3da4945e93605a297baff076295433164fdf613d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41721
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable/Disable THCx though devicetree
BUG=None
BRANCH=None
TEST=Boot and check FSP log for THC setting
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: If7683969161be67f68f441c28c80503de39079b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41571
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current implementation returns the incorrect GPIO community PID.
The GPIO community index 3 should return PID for COMM_4 and index
4 should return PID for COMM_5.
TEST=Verify PCR port id is correct for each community.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5dc48e5b31f43853b3a613c17f13f7df71f1fbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41725
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6c69dcad82ee217ed4760dea1792dd1a6612cd8b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If06695745bb72f883314e5514c616223b0210a2f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
Change-Id: Ie4f70429c516fff613d372fec7c1c955645f1c6d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
The declaration is autogenerated inside static.c file
from the pathname. The declaration here also lacked _skx_
part from the name.
Change-Id: I3adce9147e9376f6d73e410fdd4c0ee800178b58
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The declaration is autogenerated inside static.c file
from the pathname.
Change-Id: I6eda101a69522d6d526da7c174aa3085ca0fb221
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use CAPID0_A to provide information closer to reality.
* Correctly advertise ECC support, max DIMM count and max capacity
* CAPID0_A hasn't changed since SNB, but most EDS mark the bits as
reserved even though they are still used by FSP.
* Assume the same bits for Tiger Lake as for Ice Lake
* Assume the same bits for Skylake as for Coffee Lake
* Add CAPID0_A to Icelake headers
The lastest complete documentation can be found in Document: 341078-002.
Change-Id: I0d8fbb512fccbd99a6cfdacadc496d8266ae4cc7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Allow lockdown configuration from using CHIPSET_LOCKDOWN_COREBOOT
config.
TEST=Build and boot waddledoo board
Change-Id: I3abaa737580ef45b98cabfa23edd84162037dd70
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41534
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When waiting for the SMU to be ready to accept a new command, the time
spent waiting shouldn't be printed as command execution time. Also fix
the time unit in the print statement.
Change-Id: I6b97b11cd9efae7029779ee2096d4f2224cecd72
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
`fsp/util.h` draws incompatible UDK headers in. Hence, we have to
declare it locally again.
Change-Id: Iaa5981088eeb5c36f765d6332ae47a38a6a4c875
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40729
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0572dbbfb61e5e0129fe6a3a1b5894145d74fd0d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40728
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also fix wrong 32-bit writes.
Change-Id: Ib038f0cd558223536da08ba2264774db11cd8357
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40727
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The allocator should take care of this.
Change-Id: I4ec88ebe23b4dcab069f764decc8b9b0c6e6a142
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40726
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I359b529df44db7d63c5a7922cb1ebd8e130d0c43
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40725
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It never was in GNVS, it never belonged among the ACPI tables. Having
it in CBMEM, makes it easy to look the location up on resume, and saves
us additional boilerplate.
TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and
intel_backlight + acpi_video synchronize, both before and
after suspend.
Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Send a message to the SMU to turn off the system power. SMU will take
the proper final steps based on PmControl[SlpTyp].
BUG=b:153264473
TEST=verify system can enter S3
Change-Id: I3c0d98110c12963aa6fef5d176fd9acaa7ed9f26
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2140471
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41626
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new feature that allows messages to be sent to the SMU. The
offsets of the PCI config index/data indirect registers have been
documented for prior generation devices.
The index/data pair is used to access a command register, a response,
and six argument values.
BUG=b:153264473
TEST=Verify service can be used to take the system into S3
Change-Id: Ide431aa976cb2f8bdc248cb08aa0724a9596ac5a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://chromium-review.googlesource.com/2161796
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The APCB_magic.bin lives in amd_blobs, not blobs.
BUG=b:157140753
TEST=Boot trembyle to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib082a8e7fc631ca7145b0b77e49ea0cbf99dff41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41734
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|