summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2022-09-15soc/amd: Do SMM relocation via MSRArthur Heymans
AMD CPUs have a convenient MSR that allows to set the SMBASE in the save state without ever entering SMM (e.g. at the default 0x30000 address). This has been a feature in all AMD CPUs since at least AMD K8. This allows to do relocation in parallel in ramstage and without setting up a relocation handler, which likely results in a speedup. The more cores the higher the speedup as relocation was happening sequentially. On a 4 core AMD picasso system this results in 33ms boot speedup. TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM is correctly relocated with the BSP correctly entering the smihandler. Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15soc/intel/skylake: Assign device ops in chipset devicetreeNico Huber
Some PCI IDs were missing, and at least one (SPT's fast SPI device in a generic SPI driver) was wrong. Hence, this patch actually changes behavior depending on the devices actually present in a machine. In this patch the Skylake devicetree is written in a single-line style. Alternative, the device operations could be put on a separate line, e.g. device pci 00.0 alias system_agent on ops systemagent_ops end Tested on Kontron/bSL6. Notable in the log diff is that the CSE and SATA drivers are hooked up now. Change-Id: I8635fc53ca617b029d6fe1845eaef6c5c749db82 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-09-15soc/intel/xeon_sp: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I664f5b7d354b0d9a7144c25604ae4efbdd9ba9a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-09-15soc/intel/meteorlake: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ia2508abe62a194f2921d5535937ba82a60967ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-14zork/Kconfig: Move SOC_AMD_COMMON_BLOCK_ACPI_DPTCTim Van Patten
Move enabling SOC_AMD_COMMON_BLOCK_ACPI_DPTC from soc/amd/picasso/Kconfig to mainboard/google/zork/Kconfig and conditionally enable it only for Morphius boards. This reduces which boards/variants have DPTC enabled to only those that actually use it. BRANCH=none BUG=b:217911928 TEST=Build zork Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Iddebcf5dbadae135c8110e2afd9ad76ef7dcc09d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14acpi/soc: Conditionally include dptc.aslTim Van Patten
Conditionally include dptc.asl based on the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build guybrush TEST=Build skyrim TEST=Build majolica Change-Id: Idd94af8e8b2d7973abc0fb939e4600189e21656a Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67620 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/amd/cezanne/Kconfig: add defaults for FSP_M_FILE and FSP_S_FILEFelix Held
Now that the FSP binary check logic is fixed to only check the FSP files if ADD_FSP_BINARIES is selected, the default paths for the not yet published Cezanne FSP binaries can be added without breaking abuild. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9950a1fe7bd1b21109cca9631de1a8f1d265d9b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-14soc/amd/common/fsp: only check FSP_M size if ADD_FSP_BINARIES selectedFelix Held
Only check if the FSP_M size is small enough to fit inside the memory region reserved for it if ADD_FSP_BINARIES selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Nico Huber <nico.h@gmx.de> Change-Id: I6a115412c113eb0d02b8d4dfc2bb347305f97809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-14cpu/amd: Move locking SMM as part of SMM initArthur Heymans
Locking SMM as part of the AP init avoids the need for CONFIG_PARALLEL_MP_AP_WORK to lock it down. Change-Id: Ibcdfc0f9ae211644cf0911790b0b0c5d1b0b7dc9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64871 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14cpu/amd/smm: Move MP & SMM init in a common placeArthur Heymans
Change-Id: I7c457ab69581f8c29f2d79c054ca3bc7e58a896e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64870 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/amd/common: Add common function to get cpu countArthur Heymans
This is the same for all supported AMD hardware. Change-Id: Ic6b954308dbb4c5a2050f1eb8f15acb41d0b81bd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67617 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-14soc/amd: Recalculate the field power in PSS table entryZheng Bao
Being divided by 1000 causes data loss and the loss is expand by muliplication. So we just set a lower divisor before muliplication. BUG=b:185922528 Change-Id: Ib43103cc62c18debea3fd2c23d9c30fb0ecd781b Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-14soc/amd/mendocino: Add support for separate RW A/B partition SPL fileFelix Held
Add support for having different Security Patch Level (SPL) table files in the read-only and the read-write A/B partitions. This allows the SPL table file in the main or RO FMAP partition to only cover the embedded firmware binaries in that partition and have a separate SPL file in the RW A and B partitions that covers the embedded firmware binaries in the RW partitions. BUG=b:243470283 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1ba8c370ce14f7ec88e7ef2f9d0b64d6bb4fa176 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-14soc/intel/cannonlake: Read HPR_CAUSE0 registerAngel Pons
Log the Host Partition Reset Causes (HPR_CAUSE0) register, as done on newer platforms. Change-Id: I35261cefae67649fb7824e5ef3d7eb10add36a53 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-14soc/mediatek: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I9cf4097518034fa4c3ae1899840ae3a276936f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67581 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Set PLLs to hardware default valuesGarmin Chang
Some PLLs are not used in firmware, so we should keep them as hardware default values. If their modules want to set them, the corresponding drivers should set them in the kernel stage. BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I9bee18005ffed7fc1785c7fd3c0370c8293064ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/67547 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Fix indention in pll.cGarmin.Chang
BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Change-Id: I567d1ded1c3b5e36a25026cec697d43d92d5524c Reviewed-on: https://review.coreboot.org/c/coreboot/+/67546 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Change vpp_sel default mux for 4k supportGarmin Chang
vpp_sel and ethdr_sel are vdosys clock source select mux. Steps to change to support 4K source: 1. Change vpp_sel source to mainpll_d6 to run at 416MHz. 2. Change ethdr_sel source to univpll_d6 to run at 416MHz. BUG=b:233720142 TEST=build pass. Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I24f133b9b383fd019983cb29a213b47717148e97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67545 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek/mt8188: Fix some wrong settings for PLLsGarmin Chang
The observed CPU big core frequency is double compared with the current PLL setting. Therefore fix the wrong setting for PLL register APMIXED_ARMPLL_BL. Moreover, we also fix some wrong settings for other PLLs. TEST=CPU frequency of big core CPU is correct and bootup correctly. BUG=b:244215537 Signed-off-by: Garmin Chang <Garmin.Chang@mediatek.com> Change-Id: I9126f439d7a5136b2fb8d66f103ef427a0b08a99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67543 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14timer: Change timer util functions to 64-bitRob Barnes
Since mono_time is now 64-bit, the utility functions interfacing with mono_time should also be 64-bit so precision isn't lost. Fixed build errors related to printing the now int64_t result of stopwatch_duration_[m|u]secs in various places. BUG=b:237082996 BRANCH=All TEST=Boot dewatt Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-14soc/intel/mtl: Fix GPIO group pad base for ACPIKapil Porwal
This patch fixes MeteorLake GPIO PINCTRL entries as per 5.15 kernel pintrl driver: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.15/drivers/pinctrl/intel/pinctrl-meteorlake.c In order to support using ACPI GPIOs it is necessary for coreboot to be compatible with this implementation. The GPIO groups that are usable by the OS are declared with a pad base which is then used to compute the number for ACPI GPIOs. BUG=b:232573696 TEST=Tested on Google Rex board. After this change, driver rt5682s is able to claim pinctrl IRQ 358 corresponding to GPP_B06. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Icabbe9e125ee9efaf0eef4c4cdc8be9f734aa703 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67565 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-14soc/intel/meteorlake/retimer: Change loglevel prefixIvy Jian
This message is not really an error message, so BIOS_ERR is inappropriate. Since the message is informational, switch to BIOS_INFO instead. BUG=b:244687646 TEST=emerge-rex coreboot before [ERROR] USB Type-C 0 mapped to EC port 0 after [INFO] USB Type-C 0 mapped to EC port 0 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: Ia08fd45dd484c79d81527ea46cfaaa5a01a410c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67536 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-09-14soc/intel/meteorlake: Enable TcssDma1EnIvy Jian
Adding support enables/disables TcssDma1En by usb4_params. BUG=b:244687646 TEST= TcssDma1En is enabled as expected. before patch [SPEW ] PCI: 00:0d.2 [8086/0000] bus ops [DEBUG] PCI: 00:0d.2 [8086/7ec2] enabled [INFO ] PCI: Static device PCI: 00:0d.3 not found, disabling it. after patch [SPEW ] PCI: 00:0d.2 [8086/0000] bus ops [DEBUG] PCI: 00:0d.2 [8086/7ec2] enabled [SPEW ] PCI: 00:0d.3 [8086/0000] bus ops [DEBUG] PCI: 00:0d.3 [8086/7ec3] enabled Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I9cd8fc3819f533e9581fea19d4da48283888cc04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67534 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-14soc/intel/meteorlake: Enable tbtPcie2/3Ivy Jian
Adding support enables/disables tbtPcie2/3 by usb4_params. BUG=b:244687646 TEST= TRP2/3 are enabled as expected. before patch [INFO ] PCI: Static device PCI: 00:07.2 not found, disabling it. [INFO ] PCI: Static device PCI: 00:07.3 not found, disabling it. after patch [DEBUG] PCI: 00:07.2 subordinate bus PCI Express [DEBUG] PCI: 00:07.2 [8086/7ec6] enabled [DEBUG] PCI: 00:07.3 subordinate bus PCI Express [DEBUG] PCI: 00:07.3 [8086/7ec7] enabled Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: Ia1bdc9b5c0533bdddae67b8039103162a57fdc39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67530 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-13sc7180: Fix DDR training failure during warm reset with OTAVenkat Thogaru
Problem: OTA is triggering warmboot, where DDR is in self-refresh mode. Due to which DDR training is not going well. Change: Verify reboot type in case of OTA. If it is warmboot, will force for cold boot inorder to trigger DDR training BUG=b:236990316 TEST=Validated on qualcomm sc7180 development board. Test observation: Cold boot is triggered forcefully, if current reboot is warmboot in case of OTA Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com> Change-Id: I908370662292d9f768d1ac89452775178e07fc78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67406 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-12soc/amd: Remove unsupported DPTC tablet mode settingsTim Van Patten
The following boards are setting DTPC tablet mode values without corresponding device tree values, meaning they are effectively setting "random" values for tablet mode: 1. Cezanne 2. Mendocino The device tree has tablet mode disabled, so the code should never be exercised, but this CL removes it entirely to cleanup "dead" code. BRANCH=none BUG=b:217911928 TEST=Build nipperkin TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ide96f255b69670d1b4c37ca2f94cc3504a958b57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-12src/soc/intel/mtl: Remove Storage UPDSrinidhi N Kaushik
This change removes all references to HybridStorageMode UPD since it has been deprecated starting from FSP v2344_00 BUG=b:245167089 TEST=build coreboot mtlrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I16eb33cb1260484b0651d40211323c6ae986a546 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-12soc/intel/adl: Disable D3cold when legacy S3 is enabledLean Sheng Tan
D3Cold isn't supported in S3. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I072f47737ef38c44b6a676019e9a73868ff17e5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67413 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-12qualcomm/sc7280: remove unnecessary malloc and early return on failureVinod Polimera
Instead of just printing the fatal errors, do early return so that boot up time will be reduced during display init failure. Remove malloc allocation and make tu a local variable. Change-Id: I51f7a86d143128d2c426fb8940ff34a66152b426 Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66975 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-12soc/amd: Refactor DPTC Tablet ModeTim Van Patten
Refactor AMD DPTC tablet mode in preparation for adding low/no battery DPTC settings. 1. Refactor and simplify acpigen_write_alib_dptc() into the following functions: - acpigen_write_alib_dptc_default() - acpigen_write_alib_dptc_tablet() 2. Add device tree register value dptc_tablet_mode_enable to control whether DPTC tablet mode is enabled for a variant. 3. Add dptc.asl to perform the necessary ACPI checking before modifying the DPTC settings. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build nipperkin TEST=Boot skyrim Change-Id: I2518fdd526868c9d5668a6018fd3570392e809c0 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-10soc/intel/meteorlake: Hook up common code for thermal configurationSubrata Banik
Thermal configuration registers are now located behind PMC PWRMBASE for MeteorLake as well (same as ADL). Hence, using thermal common code to sets the thermal low threshold as per mainboard provided `pch_thermal_trip`. Note: These thermal configuration registers are RW/O hence, setting those early prior to FSP-S helps coreboot to set the desired low thermal threshold for the platform. TEST=Dump thermal configuration registers PWRMBASE+0x150c etc on Google/rex prior to FSP-S shows that registers are now programmed based on 'pch_thermal_trip' and lock register BIT31 is set. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I1d6b179a1ed43f00416d90490e0a91710648655e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67462 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-10soc/intel/meteorlake: Update `pch_thermal_trip` for MTLSubrata Banik
This patch updates `pch_thermal_trip` as per Intel MTL vol1 chapter 14. Additionally, dropped the `FIXME` tag for `pch_thermal_trip`. TEST=Able to boot the Google/rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I86f97c9245fe953832d3b408aa902d6a41e55651 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67461 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-10soc/intel/meteorlake: Drop redundant `MCHBAR` programming in romstageSubrata Banik
This patch drops redundant MCHBAR programming in romstage as bootblock already done with MCHBAR setting up. TEST=Able to boot Google/Rex to ChromeOS and MCHBAR is set to correct value as per iomap.h Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic2c05f47ab22dc7fe087782a1ce9b7b692ea157e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-09-10soc/intel/meteorlake: Disable FSP UPDs related to virtualizationSubrata Banik
This patch disables FSP UPDs (`VtdDisable` and `VmxEnable`) as kernel cmdline still passes `intel_iommu=off` to turn off virtualization. BUG=b:241746156 TEST=Able to boot Google/rex to ChromeOS UI. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I21e178a93e311889f2ab7d1a08230d21b051f45e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67452 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-09-09soc/mediatek/mt8186: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. TEST=build pass. BUG=none Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: Iff39486dfad556a3104b2f2b6811c34c2ded6954 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-09soc/mediatek/mt8186: Enable the protection of DEVAPCRunyang Chen
Enable the protection for DEVAPC registers of AO domain. TEST=build pass. BUG=b:244250435 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I8535438d4c7da29c9dcd97be9a2af05ea4690064 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67434 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09soc/mediatek/mt8186: Complete DEVAPC settingsRunyang Chen
In the previous patch (CB:60317), only basic settings were added. Now complete DEVPAC settings on MT8186. 1. Update permission setting 2. Update master domain setting: - domain 4: SCP - domain 5: SPM 3. Set domain remap - MMSYS (4-bit to 2-bit) TEST=test on kernel correctly. BUG=b:204229221 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I40a9b115fb21b6b955fde358241f4483b85e3db3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67433 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09soc/mediatek/mt8186: Enable CPU power hardware tracking for PMIC MT6366Sen Chu
1. There are two power sources for CPU: - Logic power (VPROC). - SRAM power (VSRAM_PROC). 2. There is a constraint between VPROC and VSRAM_PROC: - 0mV <= VSRAM_PROC - VPROC <= 250mV. With software control, the constraint might not always hold. Therefore, we enable hardware tracking from PMIC MT6366 to ensure the constraint is met automatically. BUG=b:236353282, b:241615706 TEST=meet the constrain correctly when adjusting the voltage. Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Change-Id: I6012c57e60c009f1d599b57aab1c2526ee789208 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67436 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08soc/intel/meteorlake: Hook up PAVP to KconfigSubrata Banik
Expose configuration of Intel PAVP (Protected Audio-Video Path, a digital rights protection/management (DRM) technology for multimedia content) to Kconfig. TEST=Able to boot Google/rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I416346995d744990054c8e0c839ada82c84b7550 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67423 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08soc/intel/common/smbus: Add missing ID for GLKSean Rhodes
PCI ID taken from Intel doc #569262. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I31d4b7edf3288794c86a6d2b78acdc4cf0ac611f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67405 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08soc/intel/commmon/fast_spi: Add missing ID for GLKSean Rhodes
PCI ID taken from Intel doc #569262. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I5812e536f3e1c49a272a0b337cc69f3d8f30677f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67402 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08soc/intel/alderlake: add power limits for Alder Lake-N 7W socSimon Yang
Missing power limit setting for Alder-Lake-N 7W soc. Document reference: 645548 and 646929 BUG=b:245440443 BRANCH=None TEST=Build FW and test on nivviks board and there is no error message "unknown SA ID: 0x4617, skipped power limits configuration." Signed-off-by: Simon Yang <simon1.yang@intel.com> Change-Id: Iefe17f5b574cc319fe9aad3850401a8aa8e31270 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-08src: De-conflict CALIBRATION_REGION definitionsMartin Roth
Change the name of the CALIBRATION_REGION definitions used in two separate locations. This conflict was causing an error for the lint-001-no-global-config-in-romstage test. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If6734f2a7d9be669586ea350fb9979fcd422b591 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-08soc/mediatek/mt8188: Enable ARM Trusted Firmware integrationRex-BC Chen
Enable configuration to build with MT8186 arm-trusted-firmware drivers. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id16405c84f6e0a2e21f95cc45babf85bd980b43e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67356 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/amd/mendocino/Kconfig: Enable APOB_HASHFred Reitberger
Enable the APOB_HASH feature. This improves boot times by ~10ms. BUG=b:193557430 TEST=boot to OS and verify boot time improvement Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I9628b67cd3206ffdbef23162c453dc183c69e5a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67377 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/amd/common/block/apob: Add hashed APOB supportFred Reitberger
Comparing the APOB in RAM to flash takes a significant amount of time (~11ms). Instead of comparing the entire APOB, use a fast hash function and compare just that. Reading, hashing, and comparing the hash take ~70 microseconds. BUG=b:193557430 TEST=compile and boot to OS in chausie with and without this option set Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I241968b115aaf41af63445410660bdd5199ceaba Reviewed-on: https://review.coreboot.org/c/coreboot/+/67301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-07amd: Convert dptc_enable to boolTim Van Patten
dptc_enable is being treated as a bool, so convert to explicitly be a bool. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build guybrush TEST=Build skyrim Change-Id: I0e93d892b3b8016221812c8b9ec6c257dcf13ef5 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67188 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07mb/google/geralt: Pass reset gpio parameter to BL31Bo-Chen Chen
Pass the reset gpio parameter to BL31 to support SoC reset. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/mediatek: a common implementation to register BL31 resetHung-Te Lin
The implementations of register_reset_to_bl31() are the same for MedaiTek platforms, so we extract them to soc/common/bl31.c. BUG=None TEST=build pass Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-07soc/mediatek/mt8188: Enable mfgpll properly and fix SPMI muxesJohnson Wang
Some of the pll settings are incorrect, which cause problems in GPU after booting into kernel. - MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix it to enable MFGPLL properly. - Switch SPMI clock muxes to 260M to avoid kernel hang while probing SPMI kernel driver. TEST=GPU bringup correctly. BUG=b:233720142 Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-09-06src/soc/intel: remove force-included header compiler.h from fileMartin Roth
The header file `compiler.h` is automatically included in the build by the top level makefile using the command: `-include $(src)/commonlib/bsd/include/commonlib/bsd/compiler.h`. Similar to `config.h`, 'kconfig.h`, and 'rules.h`, this file does not need to be included manually, so remove it. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5d3eb3f5e5f940910b2d45e0a2ae508e5ce91609 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-09-06src: remove force-included header rules.h from individual filesMartin Roth
The header file `rules.h` is automatically included in the build by the top level makefile using the command: `-include src/soc/intel/common/block/scs/early_mmc.c`. Similar to `config.h` and 'kconfig.h`, this file does not need to be included manually, so remove it. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-05soc/intel/alderlake: Remove dependency of FSP-S CpuMpPei ModuleSubrata Banik
This patch fixes a hidden issue present inside FSP-S while coreboot decides to skip performing MP initialization by overriding FSP-S UPDs as below: 1. CpuMpPpi ------> Passing `NULL` as coreboot assume FSP don't need to use coreboot wrapper for performing any operation over APs. 2. SkipMpInit -----> Set `1` to let FSP know that coreboot decided to skip FSP running CPU feature programming. Unfortunately, the assumption of coreboot is not aligned with FSP when it comes to the behaviour of `CpuMpPpi` UPD. FSP assumes ownership of the APs (Application Processors) upon passing `NULL` pointer to the `CpuMpPpi` FSP-S UPD. FSP-S creates its own infrastructure code after seeing the CpuMpPpi UPD is set to `NULL`. FSP requires the CpuMpPei module, file name `UefiCpuPkg/CpuMpPei/CpuMpPei.c`, function name `InitializeCpuMpWorker` to perform those additional initialization which is not relevant for the coreboot upon selecting the SkipMpInit UPD to 1 (a.k.a avoid running CPU feature programming on APs). Additionally, FSP-S binary size has increased by ~30KB (irrespective of being compressed) with the inclusion of the CpuMpPei module, which is eventually not meaningful for coreboot. Hence, this patch selects `MP_SERVICES_PPI_V2_NOOP` config unconditionally to ensure pass a valid pointer to the `CpuMpPpi` UPD and avoid APs getting hijacked by FSP while coreboot decides to set SkipMpInit UPD. Ideally, FSP should have avoided all AP related operations when coreboot requested FSP to skip MP init by overriding required UPDs. TEST=Able to drop CpuMpPei Module from FSP and boot to Chrome OS on Google/Redrix, Kano, Taeko devices with SkipMpInit=1. Without this patch: Here is the CPU AP logs coming from the EDK2 (open-source) [UefiCpuPkg/CpuMpPei/CpuMpPei.c] when coreboot sets `NULL` to the CpuMpPpi UPD. [SPEW ] Loading PEIM EDADEB9D-DDBA-48BD-9D22-C1C169C8C5C6 [SPEW ] Loading PEIM at 0x00076F9A000 EntryPoint=0x00076FA24E2 CpuMpPei.efi PROGRESS CODE: V03020002 I0 [SPEW ] Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE [SPEW ] Notify: PPI Guid: F894643D-C449-42D1-8EA8-85BDD8C65BDE, Peim notify entry point: 76FA0239 AP Loop Mode is 2 GetMicrocodePatchInfoFromHob: Microcode patch cache HOB is not found. CPU[0000]: Microcode revision = 00000000, expected = 00000000 [SPEW ] Register PPI Notify: 8F9D4825-797D-48FC-8471-845025792EF6 Does not find any stored CPU BIST information from PPI! APICID - 0x00000000, BIST - 0x00000000 [SPEW ] Install PPI: 9E9F374B-8F16-4230-9824-5846EE766A97 [SPEW ] Install PPI: 5CB9CB3D-31A4-480C-9498-29D269BACFBA [SPEW ] Install PPI: EE16160A-E8BE-47A6-820A-C6900DB0250A PROGRESS CODE: V03020003 I0 With this patch: No instance of `CpuMpPei` has been found in the AP UART log with FSP debug enabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8ebe0bcfda513e79e791df7ab54b357aa23d295c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66706 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-03soc/intel: Add SI_DESC region to GSCVD rangesJulius Werner
Intel platforms have soft straps stored in the SI_DESC FMAP section which can alter boot behavior and may open up a security risk if they can be modified by an attacker. This patch adds the SI_DESC region to the list of ranges covered by GSC verification (CONFIG_VBOOT_GSCVD). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0f1b297e207d3c6152bf99ec5a5b0983f01b2d0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66346 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-02cbfs/vboot: Adapt to new vb2_digest APIJulius Werner
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new hwcrypto_allowed argument, to potentially let them try to call the vb2ex_hwcrypto API for hash calculation. This change will open hardware crypto acceleration up to all hash calculations in coreboot (most notably CBFS verification). As part of this change, the vb2_digest_buffer() function has been removed, so replace existing instances in coreboot with the newer vb2_hash_calculate() API. Due to the circular dependency of these changes with vboot, this patch also needs to update the vboot submodule: Updating from commit id 18cb85b5: 2load_kernel.c: Expose load kernel as vb2_api to commit id b827ddb9: tests: Ensure auxfw sync runs after EC sync This brings in 15 new commits. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-09-02amdblocks/alib.h: Add DPTC parameter IDsTim Van Patten
Add additional DPTC parameter IDs that are necessary when throttling the SOC due to low/no battery. These additional parameters are used in later CLs. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build nipperkin TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I9e944d7c620414ec92d08a3d1173ba281d593ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/67182 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-02soc/intel/cmn/graphics: Use pci_dev_request_bus_master for BM enablingSubrata Banik
Enabling Bus Master isn't required by the hardware, so we shouldn't need to enable it at all. However, some payloads do not set this bit before attempting DMA transfers, which results in functionality failure. For example: in this case, unable to see the developer screen in Depthcharge. In the prior IA SoC platform, FSP/GFX PEIM does the BM enabling for the IGD BAR resources but starting with the MTL platform, it fails to do so resulting into inability to see the Pre-OS display. BUG=b:243919230 ([Rex] Unable to see Pre-OS display although GFX PEIM Display Init is successful during AP boot) TEST=Able to see the developer screen with eDP/HDMI while booting the Google/Rex. Also, this change doesn't impact the previous platforms (ADL, TGL, CML etc.) where the BM is default enabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9ad9eee8379b7ea1e50224e3fabb347e5f14c25b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-09-01amd/*/Makefile.inc: Put common words into common Makefile.incZheng Bao
Definition of FIRMWARE_LOCATION, POUND_SIGN, DEP_FILES, amd_microcode_bins are moved to common Makefile.inc. Change-Id: I5a0ea27002e09d0b879bafad37a5d418ddb4e644 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62658 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-09-01vendorcode/intel/fsp2/glk: Add the FSP headers for version 2.2.3.1Sean Rhodes
Add the headers for 2.2.3.1, which includes the following changes over 2.2.0.0: • [Implemented]GLK: XHCLKGTEN Register setting causes S0ix entry failure in less than 5 cycles when a USB2 Ethernet Dongle is connected. Refer GLK BIOS Spec Volume1 CDI# 571118 under chapter 7.20.6 for new Register settings. • [Implemented] [GLK/GLK-R] DDR4 16Gb SDP Memory support for Gemini Lake/Gemini Lake – R • [Update] MRC new version update to 1.38. • [Fixed][GLK-R][WLAN] Removed the DSW function - Wake on LAN from S4 issue with latest Wifi driver. [Update] MRC new version update to 1.39. Included fix for MinRefRate2xEnable and support for Rowhammer mitigation. • [Fixed] Disable Dynamic DiffAmp and set CTLE from 7 to 5. This change specific to DDR4 memory configuration. • GLK Klocwork Fix • [Update] MRC new version update to 1.40. Added in a separate directory as the default. The 2.2.0.0 headers were left and will be used for Google boards, as some offsets have moved. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I09498368b116c2add816eeada2fa4d0dba6e5765 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-31soc/amd/mendocino/Kconfig: select extended eSPI decode range supportFelix Held
Select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES and remove the TODO from SOC_AMD_COMMON_BLOCK_HAS_ESPI. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I90e3bf3f196e22b428b01ea0437c1224702d2b44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-31acpi: Replace EC_ENABLE_AMD_DPTC_SUPPORT with Kconfig valueTim Van Patten
Compile-time support of DPTC is controlled by EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. Each variant's run-time support of DPTC continues to be controlled by the variant's overridetree.cb "dptc_enable" value. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-31soc/intel/alderlake: Add new pcie5 alias for raptorlakeBora Guvendik
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1. References: RaptorLake External Design Specification Volume 1 (640555) BUG=b:229134437 BRANCH=firmware-brya-14505.B TEST=Boot to OS Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-31soc/mediatek/mt8188: Add SPM loader and initialize SPM in RAM stageRex-BC Chen
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. SPM is an essential component on MediaTek SoC, so we initialize PPM in soc_init(). For MT8188, SPM will handshake with DPM to do initialization, so we need to call spm_init() after dpm_init(). This SPM flow adds 33ms to the boot time. firmware log: mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs SPM: spm_init done in 33 msecs, spm pc = 0x400 TEST=spm pc is 0x400 which is in idle state. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move some SPM functions to commonBo-Chen Chen
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and MT8188, so we move them to common/spm.c. TEST=build pass. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Use MHz as unit for current_clkBo-Chen Chen
The unit of current_clk in pmif_ulposc_check() should be MHz. We use pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz. Without this modification, the judgement in pmif_ulposc_check() is alway wrong due to the wrong unit. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Add DEVAPC basic driverNina Wu
Add basic DEVAPC (device access permission control) driver. DEVAPC driver is used to set up bus fabric security and data protection among hardwares. DEVAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DEVAPC driver. 1. Initialize DEVAPC. 2. Set master domain and secure side band. 3. Set default permission. TEST=check logs of DEVAPC ok. BUG=b:236331724 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move common DEVPAC enums and functions to commonBo-Chen Chen
Some enums and functions are the same in DEVAPC driver for MT8195, MT8186, and MT8188, so we move them to common folder. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Initialize DPM in ramstageXi Chen
Add initialization of DPM drvier for DRAM low power mode. DPM is an essential component on MediaTek SoC, so we initialize DPM in soc_init(). This DPM flow adds 22ms to the boot time. coreboot logs: CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110 mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes) CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140 mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes) TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek/mt8188: Support 4 channel DRAM in DPM init flowXi Chen
TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek/mt8188: Add DPM firmware filesXi Chen
DPM is a hardware module for DRAM power management, which is used for DRAM low power mode. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-31soc/mediatek: Move dpm_4ch.c to commonXi Chen
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common folder. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-30soc/intel/cmn/block/acpi: Add new GPIO ASL MethodTim Wawrzynczak
Ths new Method, GSCI, allows control over whether or not IRQs are routed as SCI#s for the given GPIO. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ic61caaf77d2c6e295e67a1501544e8b8fc6f3b6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66813 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-30soc/intel/cmn/block/acpi: Modify GPIO Methods to use bitfieldsTim Wawrzynczak
IMHO, using bitfields directly in the Field declaration makes the ASL code more readable then directly manipulating the entire 32-bit dword. TEST=ACPI code using several of these Methods still works (google/agah dGPU ACPI code) Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9909700022d8b55db3f5208010bdff11ddaf4e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66812 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-30amd/soc/common: Update CPPC valueZheng Bao
The CPPC table value for UEFI BIOS has been changed. The code has been merged to AGESA. We can get the value by dumping ACPI table. Then we align the coreboot code with the new value. BUG=b:190420984 Change-Id: I091ab3bbc5f94961f8b366a3fa00f50f5c9fa182 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-29soc/intel/alderlake: Rename pcie5 aliasBora Guvendik
Rename pcie5 alias as pcie5_0 since raptorlake is adding a new pcie5 RC. BRANCH=firmware-brya-14505.B TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Iee669e68e3607b7ffec9f0800e9f0a916defd498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-29soc/amd/mendocino/psp_verstage/svc: Fix reset_system typeKarthikeyan Ramasubramanian
The size of the input parameter to RESET_SYSTEM svc call is expected to be 4 bytes. Fix the reset_system type from enum to uint32_t. BUG=b:243476183 TEST=Build and boot to OS in Skyrim with PSP verstage. Trigger a system reset to ensure that the system is reset successfully. Change-Id: I6319a1dfc89602722c1c2b1c4ee744493ae8b33f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67117 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek/mt8188: Enable USE_CBMEM_DRAM_INFOXi Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8188. Therefore, we select this configuration to enable it. TEST=build pass BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I14f3d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66280 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek: Move emi.c to common folderRex-BC Chen
The emi.c is the same for MT8186 and MT8188, so we could move it to the common folder and reuse it. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27soc/mediatek/mt8188: Add DRAM fast calibration supportXi Chen
Define fields of sdram_params and enable MEDIATEK_BLOB_FAST_INIT to run fast calibration for MT8188 using blob. DRAM fast calibration logs: DRAM-K: Fast calibration passed in 19530 msecs dram size (romstage): 0x200000000 TEST=Fast calibration pass. BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2468d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27soc/mediatek/mt8188: Add DRAM full calibration supportXi Chen
- Use common SoC drivers for DRAM calibration support. - Remove emi.h because sdram_size() is already declared in common/include/soc/emi.h. - Add dramc_param.h and dramc_soc.h to prepare for implementation of DRAM full calibration. TEST=build pass BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2f88d971fe861cbd09cc86c8a5a1fb531bfe78d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-26soc/intel/meteorlake: Update MTL_USE_COREBOOT_MP_INIT descriptionSridhar Siricilla
The patch update MTL_USE_COREBOOT_MP_INIT Kconfig description. TEST=Build code for MTL Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I38609cb03714084dd9092f41dd6e5b418a7f120a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-26soc/intel/mtl: Activate TME on all CPUsTarun Tuli
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as per MTL processor EDS. TEST= Able to build and boot RVP. Confirmed TME supported mode detected via temporary debug prints and MSR 0x9ff indicates activated. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Id368925504d81025239e94698d2cb0e2266a5a96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66949 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26soc/amd/picasso: Reserve space for BIOS SIG in BIOS imageRitul Guru
Change-Id: I68667d084001c753e74ba480fa7b6e09b1b88cb8 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66369 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26soc/intel/meteorlake: Provide access to IOE through P2SB SBI for TCSSJohn Zhao
This change provides access to IOE through P2SB Sideband interface for Meteor Lake TCSS functions of pad configuration and Thunderbolt authentication. There is a policy of locking the P2SB access at the end of platform initialization. The tbt_authentication is read from IOM register through IOE P2SB at early silicon initialization phase and its usage is deferred to usb4 driver. BUG=b:213574324 TEST=Built coreboot and validated booting to OS successfully on MTLRVP board. No boot hung was observed. Signed-off-by: John Zhao <john.zhao@intel.com> Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8dcee90080c6e70dadc011cc1dbef3659fdbc8f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66951 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26soc/intel/p2sb: Refactor `p2sb_execute_sideband_access` functionSubrata Banik
This patch refactors p2sb_execute_sideband_access() to be able to handle SBI operations in both SMM and non-SMM scenarios. Prior to FSP-S operation being done, the IOE P2SB device will be visible on the PCI bus hence, performing the SBI operation using IOE P2SB doesn't involve unhide/hide operation. Post FSP-S, the IOE P2SB device is hidden. Additionally, SBI operations can't be performed as is. The only possible way to send SBI is inside SMM mode and to do that, coreboot needs to unhide the P2SB device prior to sending the SBI and hide it post sending SBI. As a result, the p2sb_execute_sideband_access() function has been refactored to manage these cases seamlessly without users of the p2sb_execute_sideband_access() actually being bothered about the calling mode. BUG=b:239806774 TEST=Able to perform p2sb_execute_sideband_access() function call in both SMM and non-SMM mode without any hang/die. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iafebd5190deb50fd95382f17bf0248fcbfb23cb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-25soc/amd: rework SPI flash MMIO region handlingFelix Held
Only 16 MByte of the SPI flash can be mapped right below the 4 GB boundary. In case of a larger SPI flash size, still only the 16 MByte region starting at 0xff000000 can be configured as WRPROT and be reserved for the MMIO mapped SPI flash region. The next 16 MByte MMIO region starting at address 0xfe000000 contain for example the LAPIC MMIO region, the ACPIMMIO region and the UART/I2C controller MMIO regions which shouldn't be configured as WRPROT. Reserving this region for the MMIO mapped SPI flash would also result in an overlap with the MMIO resources mentioned above. In the case of a smaller SPI flash, reserving the full 16 MByte flash MMIO region makes sure that the resource allocator won't try to put anything else in the lower parts of the 16 MByte SPI mapping region. To avoid the issues described above, always reserve/cache the maximum amount of 16 MBytes of flash that can be mapped below 4 GB. TEST=On boards with 16 MByte SPI flash chips, the resulting image of a timeless build doesn't change with this patch. Verified this on Chausie (Mendocino), Majolica (Cezanne), Cereme (Picasso) and Google/Careena (Stoneyridge). On Mandolin (Picasso) with an 8 MByte flash, the resulting image of a timeless build is different, but neither the coreboot console output nor the Linux dmesg output shows any errors that might be related to this change. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie12bd48e48e267a84dc494f67e8e0c7a4a01a320 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66700 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-25soc/intel/mtl: Hook up Lp5CccConfig FSP UPDKapil Porwal
Hook up Lp5CccConfig FSP UPD for Intel MeteorLake. BUG=b:243734885 TEST=Built and booted on Google Rex. Verified the UPD value in MRC log. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I3d7ff8e08546f06cf7807ee825cfef84c14a6c5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67052 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-25soc/intel/mtl: Hook up ECT FSP UPDKapil Porwal
Hook up ECT FSP UPD for Intel MeteorLake. BUG=b:243734885 TEST=Built and booted on Google Rex. Verified the UPD value in MRC log. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Idc23717c3ce52e3635e2da41733058f912545e5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67051 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-25soc/intel/mtl: Program MCHBASE prior enabling extended bios rangeSubrata Banik
This patch resolves the SoC programming dependency order where enabling extended bios support requires MCHBASE to be enabled. BUG=b:243693375 TEST=Able to boot from RW-A slot which is mapped to extended BIOS range. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8bd9c3d3fb5e82e34f2d6af8548452c744d4b3c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67046 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-25soc/amd/common/fsp/dmi: Set dimm voltage based on memory typeMatt DeVillier
Voltage set based on standard configuration for each type. TEST=build/boot google/skyrim, verify output in cbmem console log, DMI type 17 table. Change-Id: I9b1e68a9417e43cbb9c55b4c471664f3f9090342 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66981 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-08-25soc/amd/common/fsp/dmi: Print MT/s speeds, not frequency in debug outputMatt DeVillier
Since the frequency field is deprecated, print the max/configured MT/s speeds instead. TEST=build/boot google/skyrim, verify output in cbmem console log Change-Id: Icee5af762ca37c3b2ec8c9a52a7f32fb848390b0 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66980 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-08-25soc/amd/common/fsp/dmi: Translate DRAM speeds for (LP)DDR5Matt DeVillier
Hook up newly-added method to convert from frequency to MT/s so that boards which use (LP)DDR5 report their capability properly. BUG=b:239000826 TEST=build/boot google/skyrim, verify SMBIOS Type 17 table reports DRAM speeds correctly. Change-Id: I694b6c227a8d8fb40c897053808bc79df330ed0c Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66954 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-08-24soc/intel/common/block: Drop empty smm.hAngel Pons
This file has nothing useful. Get rid of it. Change-Id: Id2a42005d3b4b5161079c9ff48867cfc6fb0413d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-08-24soc/intel/adl: Consider INTEL_TME config prior TME MSR programmingSubrata Banik
This patch brings INTEL_TME config check prior programming TME Set Activation Core MSR on all cores. TEST=Able to boot Google/Taeko to OS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8af7e305da1050f443929ab33be556e713e53e9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66976 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-24soc/intel/alderlake/hsphy: Add support for HSPHY firmware loadingMichał Żygowski
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init. Implementation based on public Slimbootloader's "Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib". TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded. PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot. [DEBUG] HECI: Sending Get IP firmware command [DEBUG] HECI: Get IP firmware success. Response: [DEBUG] Payload size = 0x6944 [DEBUG] Hash type used for signing payload = 0x3 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-08-24soc/intel/meteorlake: Enable GPIO 4 bits pad mode configurationJamie Ryu
This enables SOC_INTEL_COMMON_BLOCK_GPIO_PMODE_4BITS to support 4 bits GPIO pad mode to configure native function 8 to 15. BUG=b:239690757 TEST=build and verify pad mode configuration with Meteor Lake mtlrvp Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Ibf4b13a3d19095d15bf857c7fe4ec0affb54a4e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66391 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-24soc/intel/common/gpio: Support 4 bits GPIO pad mode configurationJamie Ryu
Intel GPIO pad supports 4 bits pad mode, PAD_CFG_DW0[13:10] for pins that native function 8 to 15 is assigned. This adds native function definitions from NF8 to NF15 and updates PAD_CFG0_MODE_MASK to support 4 bits pad mode configuration. Since PAD_CFG_DW0[16:13] is reserved for pins that NF8 or higher is not assigned, this change would not cause an issue but Kconfig option is added to minimize an impact and support 4 bits pad mode configuration. BUG=b:239690757 TEST=build and verify pad mode configuration with Meteor Lake mtlrvp Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Iefd2daa92a86402f2154de2a013ea30f95d98108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-23{sb,soc}/intel: Do not require hda_verb.cAngel Pons
Just use the conditional inclusion through `device/Makefile.inc`. Change-Id: Id363a97460ae2cfe4b10d491d4ef06394eb530c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-08-22soc/intel/alderlake: Perform TME core activation on all CPUsSubrata Banik
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as per Alder Lake Processor EDS. TEST= Able to build and boot Google/Redrix. Dumping MSR 0x9FF on all logical processors shows zero value being set. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I130480d4fba413d47d0d0137932ec1fb041a88d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66753 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-22soc/intel/cmn/cpu: API to set TME core activationSubrata Banik
This patch implements API to program TME core activation MSR 0x9FF. Write zero to TME core activate MSR will translate the TME_ACTIVATE[MK_TME_KEYID_BITS] value into PMH mask register. Note: TME_ACTIVATE[MK_TME_KEYID_BITS] = MSR 0x982 Bits[32-35] TEST=Able to build and boot Google/Redrix. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I48cf8e255b294828ac683ab96eb61ad86578e852 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 21:32:46 +0000