summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2022-03-29soc/amd/common/block/lpc: Add support to not clear port80 enableKarthikeyan Ramasubramanian
SMU locks up sometimes if the port80 enable bit is cleared in the ESPI Decode register. Add a config to choose between clearing the entire ESPI Decode Register vs retaining the port80 enable bit. BUG=None TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ia5ee012ac4858d6dd43827274169edf622a70489 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-29soc/mediatek/mt8186: Enable USE_CBMEM_DRAM_INFORex-BC Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8186. Therefore, we select this configuration to enable it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ieaaf57aaee79c9dce69cc1acaa092207f0f906de Reviewed-on: https://review.coreboot.org/c/coreboot/+/63114 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/mediatek: Add a configurate "USE_CBMEM_DRAM_INFO"Rex-BC Chen
The memory initialization reference code didn't support returning DRAM information in the old platforms, for example MT8192 and MT8195. So we have to add a new configuration USE_CBMEM_DRAM_INFO to make sure the common code will try to get DRAM information on new platforms supporting that. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iebe9ea0c1d01890b09fdf586813d85adde9702e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8186: Fix pmif setting for low power modeZhiyong Tao
The current pmif register setting for low power mode is incorrect, which is causing suspend failure. The issue of suspend failure is that SRCLKENA0 will not be pulled down. EC will not be informed AP is suspending now becuase of this. Therefore, add pmif_spmi_set_lp_mode() to correct the setting. This implementation is based on chapter 3.7 in MT8186 Functional Specification. BUG=b:215639203 TEST=test of suspend and resume pass. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Change-Id: I2d02198f19f9cb052fba612c02404a6af1a10adb Reviewed-on: https://review.coreboot.org/c/coreboot/+/63089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-29mb/google/cherry: support max98390 audio ampTrevor Wu
The Cherry follower projects may choose Max98390 for audio output so we have to add a new config CHERRY_USE_MAX98390. Also, the 'dojo' device is the first one to use it. BUG=b:204391159 BRANCH=cherry TEST=emerge-cherry coreboot TEST=Verify beep function through CLI in depthcharge successfully Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Change-Id: I9b6bc5a5520292dd502b0389217f5062479b4490 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63083 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/intel: Move `pmc_clear_pmcon_sts()` into IA common codeSubrata Banik
This patch moves `pmc_clear_pmcon_sts` function into common code and remove SoC specific instances. Accessing PMC GEN_PMCON_A register differs between different Intel chipsets. Typically, there are two possible ways to perform GEN_PMCON_A register programming (like `pmc_clear_pmcon_sts()`) as: 1. Using PCI configuration space when GEN_PMCON_A is a PCI configuration register. 2. Using MMIO access when GEN_PMCON_A is a memory mapped register. SoC users to select `SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION` Kconfig to perform GEN_PMCON_A register programming using PMC MMIO. BUG=b:211954778 TEST=Able to build brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeff Daly <jeffd@silicom-usa.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-03-28soc/amd/sabrina/Kconfig: update SOC_AMD_COMMON_BLOCK_UCODE_SIZEFelix Held
The Sabrina microcode update files are 3200 bytes large and not 5568 like it is the case on Cezanne where this file was originally copied from. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I12209d523096781195ba8957ec797d8c80eecbe5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-03-28soc/intel/alderlake: Enable FSP_USES_CB_DEBUG_EVENT_HANDLER KconfigSubrata Banik
This patch uses the FSP event handler feature and updates with coreboot native debug implementation to unify the debug library between coreboot and FSP. BUG=b:225544587 TEST=Able to build and boot Brya with the same FSP debug log before and with this code changes. Before: Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3 Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A The 0th FV start address is 0x000F961B000, size is 0x00150000, handle is 0xF961B000 Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39 Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38 Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6 With this code change: [SPEW ] Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE [SPEW ] Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3 [SPEW ] Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A [SPEW ] The 0th FV start address is 0x000F95C0000, size is 0x00160000, handle is 0xF95C0000 [SPEW ] Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39 [SPEW ] Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38 [SPEW ] Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a0530a282657e379a00c3e7d0ed8148dd5e9196 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-28soc/intel/alderlake: Use coreboot native event handler for FSP-M/SSubrata Banik
This patch assigns FSP handler event for FSP-M and FSP-S with coreboot romstage and ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER Kconfig is enabled. BUG=b:225544587 TEST=Able to build and boot brya. Also, verified the FSP debug log is exactly same before and with this code change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I665def977faaae45f6f834d75e8456859093ba49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-27soc/mediatek: Include 'console/console.h' when appropriateElyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) Change-Id: I93f930de5a2a477ec4c0d8e5c8c57b25f5e4252c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
2022-03-27src/soc/mediatek: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: Ifc85ed8b5660eca11be50fddda0cf32aa1dd611c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-27src: Remove unused <bootmode.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <bootmode.h>' -- src/) <(git grep -l 'platform_is_resuming\|gfx_set_init_done\|gfx_get_init_done\|display_init_required\|get_ec_is_trusted\|get_lid_switch\|get_wipeout_mode_switch\|clear_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_write_protect_state\|init_bootmode_straps' -- src/) |grep "<" Change-Id: I2ebd472e0cfc641bd7e465b8d29272fd2f7520a1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-27soc/mediatek/mt8195: Update audio and adsp power controlChun-Jie Chen
To control I2S in MT8195 for dojo project, we need to enable adsp power before audio power. Therefore, we need to update bus protection steps to correct the setting. TEST=build pass BUG=b:204391159 BRANCH=cherry Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: I0bcf1ddeebf0d3df0a1d6b22273123be1aaf85a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63106 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-25soc/amd/pi: Use -Wno-pragma-packArthur Heymans
Agesa headers extensively use and override pragma pack which fails to compile with clang. Change-Id: Ib234be536388f41d63c2d26cac4c35881af25930 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-25soc/amd/pi/amd_late_init.c: Fix implicit enum conversionArthur Heymans
This fixes building with clang. Change-Id: Ifda9be8996703b06fe9ee30ffb5f56a91629e065 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-03-25soc/intel/*/meminit.c: Fix formatted printArthur Heymans
This fixes building with clang. Change-Id: If2686b0938d34cd66393eb14205c5c8a5b3ba98b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-03-25soc/amd/noncar/memmap.c: Fix formatted printArthur Heymans
Fixes building with clang. Change-Id: I7027f3681e18b8ca0d2f0c899412806082846463 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63050 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-25soc/amd/dmi.c: Fix implicit enum typingArthur Heymans
Clang complains about implicit enum typing so make it explicit. Change-Id: I20aba3bd3af8a7292e04d2496c3cba1ab6ba3019 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-25soc/mediatek/i2c.c: Remove unused variablesArthur Heymans
Change-Id: Iaa643feb76530cc74acf4d714d8a7f96709be1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-25soc/amd/sabrina/cpu.c: Skip SMMINFO init in S3 resumeFred Reitberger
SMMINFO is already set up in S5, so it should be skipped in S3 resume TEST=builds Change-Id: I58e25075a007505e53962525ec4d9acd2ce6c7ae Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-25soc/amd/picasso/cpu.c: Skip SMMINFO init in S3 resumeFred Reitberger
SMMINFO is already set up in S5, so it should be skipped in S3 resume TEST=builds Change-Id: Ia58000ce9dac5ecb69ca39354f7775524e439bd0 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-25soc/amd/cezanne/cpu.c: Skip SMMINFO init in S3 resumeFred Reitberger
SMMINFO is already set up in S5, so it should be skipped in S3 resume BUG=b:194990818 TEST=Build guybrush Change-Id: I30ee6d7006ddac4dbdae9825bd4fa6eac7fd48cb Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-25soc/amd/sabrina: update soft fuse bit 15 definitionFelix Held
For SoC that don't support LPC any more the definition of the PSP soft fuse chain bit 15 has changed. Earlier SoCs that still supported a physical LPC bus used this bit to determine if the I/O port 0x80 POST code are sent to LPC or eSPI. Newer SoCs like Sabrina don't have a physical LPC bus any more and on those this bit selects if the PSP debug output is sent to the SoC's MMIO UART or an UART on I/O port 0x3F8 that the needs to be decoded to eSPI. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0bffb6efacc585a1d02a0455b32f7cf8662b3232 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-24soc/intel/common: Add APIs to check CSE's write protection infoSridhar Siricilla
The patch add APIs to check CSE Region's write protection information. Also, adds helper functions to get the SPI controller's MMIO address to access to BIOS_GPR0 register. The BIOS_GPR0 indicates write and read protection details. During the coreboot image build, write protection is enabled for CSE RO. It is enabled through a Intel MFIT XML configuration. TEST=Verify write protection information of CSE Region Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If1da0fc410a15996f2e139809f7652127ef8761b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-23soc/amd/sabrina: Add prompt for AMDFW_CONFIG_FILEKarthikeyan Ramasubramanian
This will allow configuring the concerned config through an external defconfig file. BUG=None TEST=Ensure that AMDFW_CONFIG_FILE is configurable. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I97817a822c8c41822e699adc31f0e7452f93fdb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62971 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-23amdfwtool: Change the some FW's level for A/B recoveryZheng Bao
The Pubkey(0), PSP bootloader(1) and IKEK(0x21) should be put to level 2 only for A/B recovery for Sabrina, which is going to be the long term and A/B recovery layout only. So the amdfwtool should be changed for Sabrina. The old levels of these 3 FWs are for Cezanne, which doesn't use AB recovery now. Just set the specific field levels in generic Cezanne folder for demo. Leave the fw.cfg in Guybrush unchanged. Change-Id: I11092b52927b2c526a5be719104ba39a790b6fa8 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-03-23soc/amd/cezanne: Turn off gpp clock request for disabled devicesRobert Zieba
The current behavior does not actually check if a device is present before enabling the corresponding gpp_clkx_clock_request_mapping bits which may cause issues with L1SS. This change sets the corresponding gpp_clkx_clock_request_mapping to off if the corresponding device is disabled. BUG=b:202252869 TEST=Checked that value of GPP_CLK_CNTRL matched the expected value when devices are enabled/disabled, checked that physically removing a device that is marked as enabled also disables the corresponding clk req BRANCH=guybrush Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I77389372c60bdec572622a3b49484d4789fd4e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61259 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-23soc/amd/cezanne: Add PSP Bootloader for AB recovery in fw.cfgZheng Bao
TypeId0x01_PspBootLoader_AB_Stage1_CZN.sbin is bootloader for A/B recovery. Both bootloader can be put in the fw.cfg. The amdfwtool decides which booloader is dropped in the directory. Change-Id: I099b4c98d64dba935bf3ea2b7f191da83b9bd95e Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
2022-03-23soc/amd/common/psp_verstage: Write postcodes after ESPI initKarthikeyan Ramasubramanian
On boards where PSP uses ESPI to write postcodes, update the verstage to do it after ESPI initialization. BUG=b:224543620 TEST=Build and boot to OS in Nipperkin. Ensure that there are no attempts to write the post code from PSP verstage before ESPI initialization. Change-Id: I1b78931c741c75dc845c9b34e3b2b896221f2364 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mohan Viswanathan Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-23soc/intel/adl-n: Add device ID for TCSS XHCIMaulik V Vaghela
This patch adds TCSS XHCI device ID for ADL-N CPU which is required for USB3 port enumeration. Document Reference: 645548 revision 1.0 (Chapter 2.3) BUG=None BRANCH=None TEST=Check if device is detected correctly and ACPI entries are generated for device 0d.0 Change-Id: Id5d42d60eb05137406ef45b9e87e27948fc3b674 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-23src/mediatek/mt8186: Implement sdram_size() to get real dram sizeXi Chen
Originally, dram size is hard-coded to 4GB by default. To support different dram size, calculate it from the mem chip info stored in CBMEM. BUG=b:206014043 TEST=Output "dram size: 0x100000000" on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I017e9d1a2d6e26f1fc21b67b5962dfb5c6ade8a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-23soc/mediatek: Save dram info to cbmemXi Chen
Store dram info in cbmem for ramstage or payloads to use. BUG=b:206014043 TEST=Build pass on Kingler Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I195187c0c757a43bb6d2c57c8f303249f2a7995a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-22soc/amd/common: move FCH IOAPIC and HPET init from SMBUs to LPC deviceFelix Held
Despite the SMBus device being function 0 of the FCH PCI device, the MMIO resource of the FCH IOAPIC is on the LPC device which is function 3 of the same PCI device, so move the FCH IOAPIC initialization code to the LPC device. Since the HPET was enabled in the same function, also move it to the LPC device initialization. TEST=On Mandolin both IOAPICs are still correctly detected by Linux. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I585afd463c1c00cd87ced0617e7802503c5deba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58334 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-22soc/intel/{adl,common}: Add ASPM setting in pcie_rp_configKevin Chang
This change provides config for devicetree to control ASPM per port BUG=b:220079865 TEST=Build FW and run stress exceed 2500 cycles on taeko. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I19b5f3dc8d95e153301d777492c921ce582ba988 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62919 Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin L Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-21soc/intel/common: Add IOE P2SB for TCSSJohn Zhao
Meteor Lake has the IOE Die for TCSS. This change adds the IOE P2SB sideband access and exposes API for TCSS usage. BUG=b:213574324 TEST=Build platforms coreboot images successfully. Change-Id: I01f551b6e1f50ebdc1cef2ceee815a492030db19 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-19soc/intel/common/block/p2sb: Add helper function to enable BARSubrata Banik
This patch creates a new helper function to enable P2SB BAR. `p2sb_dev_enable_bar()` takes the PCI P2SB device address (B/D/F) and BAR address (combining high and low base addresses). BUG=b:224325352 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ica41e8e8bdfcfe855e730b3878b874070062ef93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2022-03-18soc/mediatek/mt8186: Disable unused spm_thermalRex-BC Chen
In MT8186, we need to disable spm_thermal to prevent it from influencing other wdt status. There are two hardware pathes which are used for asserting watchdog from thermal. We can disable status of path 1 because status of path 2 is used. 1. Thermal -> SPM -> WDT 2. Thermal -> WDT Spm_thermal (path 1) is a flexible option for software control, and the hardware designer suggests that we should disable it if we don't use it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0ffde6bad3000a64e3b5782edaa72c62da034302 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62890 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Trigger wdt SW reset when wdt status is not equal to 0Rex-BC Chen
Because we close external signal in kernel driver since MT8195, it's more reasonable to trigger sw reset with exteranl signal again whenever the wdt status is not equal to 0. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic6128df7eadaebcf7ff8d4c5492e3e0cfbab6e36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62797 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-18soc/mediatek: Set soc_ops.set_resources as no-opYu-Ping Wu
Without setting the set_resources field for soc_ops, we will get an error during device initialization: [ERROR] CPU_CLUSTER: 0 missing set_resources Because the set_resources field is considered mandatory, explicitly set it as no-op noop_set_resources. BUG=b:224419346 TEST=emerge-corsola coreboot TEST=Did not see the error on krabby BRANCH=none Change-Id: Ic82b86f0482a9de09e942c1674be5f0ac615851f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-18soc/intel/common/block/cse: Change loglevel prefix to WARNINGWisley Chen
This message is not really an error message, so BIOS_ERR is inappropriate. The message does seem more like a warning though, that the developer could have multiple Kconfigs selected to send EOP, therefore switch to BIOS_WARN instead. BRANCH=firmware-brya-14505.B TEST=build Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I57a34334007a6a7443302c2f25de3d5c87c85573 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-17soc/intel/adl: Remove IOM Mctp command from TCSS ASLMAULIK V VAGHELA
TCSS ASL code was carried forward from TGL and it used to follow the same sequence. Recently as part of s0ix hang issue, it was found that sending IOM MCTP command as part of TCSS D3 Cold enter-exit sequence created an issue. We discovered that due to change in hardware sequence, ADL should not set/reset IOM MCTP during D3 cold entry or exit. This patch removes the bit setting from ASL file to prevent hang in the system. This patch also removes obsolete Pcode mailbox communication which is no longer required for ADL. BUG=b:220796339 BRANCH=firmware-brya-14505.B TEST=Check if hang issue is resolved with the CL and no other regression observed Change-Id: I2f066bcc4a8f475a15ddd12ef5ed87d7298312bb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62861 Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17soc/amd/cezanne: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I254e26080319478b1b5b1f5c353a7966cfac63b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-17soc/amd/picasso: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I14903980fd921cad24c39cadd533349c14cc1cd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-17soc/amd/sabrina: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I8d4f5b1124d4017b04bcaf7044216fd696dce63d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-17soc/intel/alderlake/retimer: Change loglevel prefixWisley Chen
This message is not really an error message, so BIOS_ERR is inappropriate. Since the message is informational, switch to BIOS_INFO instead. BUG=b:222038287 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I9dc852a0cd30f95506c205f161a05e8a8c44fcd5 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17soc/intel/common/block/p2sb: Refactor P2SB to add comprehend future SoCSubrata Banik
This patch refactors the current P2SB common code driver to accommodate the future SoC platform with provision of more than one P2SB IP in disaggregated die architecture. IA SoC has only one P2SB in PCH die between SKL to ADL. Starting with MTL, one more P2SB IP resides in IOE die along with SoC die. (PCH die is renamed as SoC in MTL.) P2SB library (p2sblib.c) is common between PCH/SoC and IOE, and p2sb.c is added only for PCH/SoC P2SB. BUG=b:224325352 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib671d9acbfdc61305ebb401499bfc4742b738ffb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-17qualcomm/sc7280: Add mdp clock support to turbo in corebootTaniya Das
This change supports the configuration and enablement of mdp clock to vote for turbo and supports different display panel resolutions and framerates. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ibf4f11d02b0edf83461dbb7af99fda5f33cd5b71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62371 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17qualcomm/sc7280: Add display external clock support in corebootTaniya Das
Add support for EDP (Embedded DisplayPort) clocks in coreboot. This change supports the configuration and enablement of EDP PIXEL, LINK, LINK_INTF and AUX clocks. BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ia6872ede515401e95ea2dadc9766e3e70fb66144 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59611 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-17soc/intel/alderlake: Update ADL-P id list of th VccIn Aux Imon IccMax valuesCurtis Chen
Add ADL-P MCH ID 4, 8, 9, 10 into this list. BUG=b:222038287 BRANCH=firmware-brya-14505.B TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I2cee31ba56e0b142c50a745c453968635e86296e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-17soc/intel/common/block/cpu: Enable ROM caching in ramstageSubrata Banik
Cache the BIOS region and extended BIOS region if the boot device is memory mapped, which is mostly the case with Intel SoC platform. Having the ROM region cached helped to improve the pre-boot time. TEST=Able to boot redrix to Chrome OS without seeing any sluggishness. Additionally verified on EHL board (from siemens), shows significant savings in payload loading time as below: Here is the timestamp snippet showing the payload load time as a comparison between current upstream and the patched version: upstream: 90:starting to load payload 1,072,459 (1,802) 958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619) with this patch: 90:starting to load payload 1,072,663 (2,627) 958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I02b80eefbb3b19331698a205251a0c4d17be534c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-17soc/intel/common/fast_spi: support caching `ext_bios` in ramstageSubrata Banik
This patch provides a way to cache `ext_bios` region for all stages to save boot time. TEST=Able to see the ext_bios region in MTRR snapshot when cached on the Brya variants. Here is the timestamp snippet showing the payload load time as a comparison between current upstream and the patched version: upstream: 90:starting to load payload 1,072,459 (1,802) 958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619) with this patch: 90:starting to load payload 1,072,663 (2,627) 958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I87139a9ed7eb9ed43164a5199aa436dd1219145c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-16soc/qualcomm/common: Add dram information to CBMEM tableRavi Kumar Bokka
BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I0f1dd05ee224bf8284661c0afaa01d0a9d71daa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-03-16soc/intel/common: Retry MEI CSE DISABLE commandSridhar Siricilla
As per ME BWG, the patch retries MEI CSE DISABLE command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. TEST=build and boot the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Id38a172d670a0cd44643744f27b85ca7e368ccdb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/intel/common: Retry END_OF_POST commandSridhar Siricilla
As per ME BWG, the patch retries END_OF_POST command if CSE doesn't respond or sends the garbled response. It retries the command additionally 2 more times. BUG=b:200251277 TEST=Verify EOP retry mechanism for brya board. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ieaec4d5564e3d962c1cc866351e9e7eaa8e58683 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-16soc/mediatek: PCI: Remove global variableJianjun Wang
Remove global variable and use 'pcidev_path_on_root()' to get the base address of PCIe controller. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ia41c82a7aa5d6e9d936e242550851cef83afeae9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/mediatek: Add chip config for setting PCIe configJianjun Wang
Add chip config for setting PCIe config. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Icff83f2a9f76862065987a74cfcc7e511be80a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-16soc/amd/common/block: Add mainboard_handle_smiRaul E Rangel
The current SMM framework only allows the mainboard code to handle GPEs. i.e., Events 0 - 23. This change allows the mainboard code to handle any SMI events not handled by the SoC code. This will allow the mainboard code to handle `SMITYPE_ESPI_SMI`. BUG=b:222694093 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I81943e8cb31e998f29cc60b565d3ca0a8dfe9cb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-15soc/intel/tgl: move DIMM_SPD_SIZE from mb to SoC KconfigMichael Niewöhner
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to 512 in the SoC Kconfig and drop it from the mainboard Kconfigs. Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-15intel/common/block: Add APL and GLK PCI IDs for HDASean Rhodes
Add PCI ID's for APL/GLK so they can use HDA. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I37df388a93ffc06e716085a58d0d00ed5c6fa9e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-15soc/mediatek/mt8186: change pmic hwcid from warning to infoRex-BC Chen
The pmic hwcid dumping should not be a warning, so we modify it to info. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a930b69bd45d5f0d84c3d269ca721b287dbadea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15soc/mediatek/common: Add halt() after triggering wdt resetRex-BC Chen
It's more reasonable to halt when we trigger watchdog reset because the whole system should be reset afterwards. BUG=b:222217317 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I726ba1599841f63b37062f9ce2e04840e4f250bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-15soc/intel/alderlake: Allow mainboard to configure c1-state auto-demotionMAULIK V VAGHELA
FSP has a parameter to enable/disable c1-state autodemotion feature. Boards/Baseboard can choose to use this feature as per requirement. This patch hooks up this parameter to devicetree BUG=b:221876248 BRANCH=firmware-brya-14505.B TEST=Check code compiles and correct value has been passed to FSP. Change-Id: I2d7839d8fecd7b5403f52f3926d1d0bc06728ed9 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-03-15soc/intel/adl/chip.h: Convert all camel case variables to snake caseMAULIK V VAGHELA
coreboot chip.h files mainly contains variable which allows board to fill platform configuration through devicetree. Since many of this configuration involves FSP UPDs, variable names were in camel case which aligned with UPD naming convention. By default coreboot follow snake case variable naming, so cleaning up file to align all variable names as per coreboot convention. During renaming process, this patch also removes unused variables listed below: -> SataEnable // Checked in SoC code based on PCI dev enabled status -> ITbtConnectTopologyTimeoutInMs // SoC always passes 0, so not used Note: Since separating out changes into smaller CL might break the compilation for the patch set, this is being pushed as a single big CL. BUG=None BRANCH=firmware-brya-14505.B TEST=All boards using ADL SoC compiles with the CL. Change-Id: Ieda567a89ec9287e3d988d489f3b3769dffcf9e0 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-03-15{mb, soc}: Move mrc_cache invalidating logic into `memory` common codeSubrata Banik
Commit hash b8b40964 ( mb, soc: Add the SPD_CACHE_ENABLE) introduced per mainboard logic to invalidate the mrc_cache. This patch moves mrc_cache invalidating logic into IA common code and cleans up the code to remove unused argument `dimms_changed` from SoC and mainboard directory. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6f18e18adc6572571871dd6da1698186e4e3d671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-15soc/intel/common: Pass `FSPM_UPD *` argument for spd functionsSubrata Banik
This patch adds `FSPM_UPD *` as argument for mem_populate_channel_data() and read_spd_dimm(). This change will help to update the architectural FSP-M UPDs in read_spd_dimm(). BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I770cfd05194c33e11f98f95c5b93157b0ead70c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-15{mb, soc}: Change `memcfg_init()` and `variant_memory_init()` prototypeSubrata Banik
This patch modifies `memcfg_init` and `variant_memory_init`functions argument from FSP_M_CONFIG to FSPM_UPD. This change in `memcfg_init()` argument will help to update the architectural FSP-M UPDs from common code blocks rather than going into SoC and/or mainboard implementation. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=Able to build and boot redrix without any visible failure/errors. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-14soc/intel/common: Use generic enum type valuesSridhar Siricilla
The patch uses generic enum type values for EOP command handler. So, it renames cse_eop_result enum type to cse_cmd_result and also renames the enum values to have generic name. TEST=Build the code for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie0efa8fff08318ed863010db289959d113f4767e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14soc/intel/common: Use heci_reset() in the CSE TX and RX flowsSridhar Siricilla
The patch implements error handling as per the ME BWG guide. The BWG recommends HECI interface reset if there is a timeout or malformed response is received from the CSE. Also, the patch triggers HECI interface reset if the CSE link state is not ready in the heci_send() API. TEST=Verify HECI Interface reset in the simulated error scenarios. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I3e4a97800cbc5d95b8fd259e6e34a32fc82d8563 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14soc/intel/common: Implement error codes for for heci_send_receive()Sridhar Siricilla
The patch implements below changes: 1. Implements different error codes and use them in appropriate failure scenarios of below functions: a. heci_send() b. recv_one_message() c. heci_receive() 2. As heci_send_receive() is updated to return appropriate error codes in different error scenarios of sending and receiving the HECI commands. As the function is updated to return 0 when success, and non-zero values in the failure scenarios, so all caller function have been updated. BUG=b:220652101 TEST=Verified CSE RX and TX APIs return error codes appropriately in the simulated error scenarios. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ibedee748ed6d81436c6b125f2eb2722be3f5f8f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-14soc/intel/alderlake: Add EPP override supportCliff Huang
This updates energy performance preference value to all logical CPUs when the corresponding chip config is true. BUG=b:219785001 BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: Ie59623fe715b0c545f8d4b6c22ab2ce670a29798 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-10soc/intel/alderlake: Inject CSE TS into CBMEM timestamp tableBora Guvendik
Get boot performance timestamps from CSE and inject them into CBMEM timestamp table after normalizing to the zero-point value. Although consumer CSE sku also supports this feature, it was validated on CSE Lite sku only. BUG=b:182575295 TEST=Able to see TS elapse prior to IA reset on Brya/Redrix 990:CSME ROM started execution 0 944:CSE sent 'Boot Stall Done' to PMC 88,000 945:CSE started to handle ICC configuration 88,000 (0) 946:CSE sent 'Host BIOS Prep Done' to PMC 90,000 (2,000) 947:CSE received 'CPU Reset Done Ack sent' from PMC 282,000 (192,000) 0:1st timestamp 330,857 (48,857) 11:start of bootblock 341,811 (10,953) 12:end of bootblock 349,299 (7,487) Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Idcdbb69538ca2977cd97ce1ef9b211ff6510a3f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-10soc/amd/{common/vboot,cezanne}: Copy S0i3 verstage logs into cbmemRaul E Rangel
Now that SMM can write to CBMEM we can simply replay the transfer buffer cbmem console to move it into the main cbmem console. replay_transfer_buffer_cbmemc() relies on the EARLY_RAM linker symbols. Since the SMM rmodule get linked with a different linker script than bootblock/romstage it doesn't have access to these symbols. In order to pass these symbols into SMM, we parse the bootblock.map file and generate an early_ram.ld script. This script is then used when linking SMM. I replay the buffer in `smm_soc_early_init` because this call happens before `console_init()`. `console_init()` prints the SMM header and we want to append the verstage contents before printing the header to avoid confusion. BUG=b:221231786 TEST=Perform S0i3 cycles and verify PSP verstage logs now show up when doing `cbmem -c`. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I64d33ccdee9863270cfbcaef5d7c614349bd895c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10soc/mediatek/mt8195: Enable PCIe supportJianjun Wang
Enable PCIe support for mt8195. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I314572955f1021abe9f2f0f4635670135ed08fff Reviewed-on: https://review.coreboot.org/c/coreboot/+/56793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/mediatek/mt8195: Add driver to configure PCIeJianjun Wang
Add a new function 'mtk_pcie_pre_init' to assert the PCIe reset at early stage to reduce the impact of 100ms delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: If6799c53b03a33be91157ea088d829beb4272976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-10soc/amd/cezanne/psp_verstage: Log the platform boot mode reportKarthikeyan Ramasubramanian
Log the platform boot mode reported by PSP verstage to PSP stage 1 bootloader. This helps to improve the debuggability. BUG=b:193050286 TEST=Build and Boot to OS in Nipperkin. Ensure that the platform boot mode is logged in the verstage logs. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I752ee56f2af48215a770d799432d02f0609757cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-03-10soc/intel/adl: Send EOP early in the boot sequenceMAULIK V VAGHELA
As part of boot time optimization, one of the culprit was CSE where response to End Of Post (EOP) command used to take ~60ms. Earlier patch was pushed to delay the EOP to reduce response time to ~5-7 ms. During this stage overall platform boot time was ~1.15 seconds. Once boot time was optimized to ~ 1 seconds, CSE EOP time again increased to ~80 ms since coreboot used to send EOP at the time where CSE was busy. This created some back and forth moving of sending EOP command function within coreboot sequence. Upon debugging using traces, it was found that coreboot used to send EOP late where CSE was busy loading other IP payload, so it might take more time to respond. In order to avoid delayed response, coreboot has to send EOP in stage when CSE is done with firmware init and it will be ready to serve EOP as soon as possible. This also aligns with previous flow where FSP used to send EOP once silicon init is done and coreboot used to rely on FSP to send this message. Moving EOP to earlier stage (From SoC) meets the requirement and CSE EOP time reduces from ~60 ms to ~20 ms on Brya board. Note that once SoC code sends EOP, coreboot common code won't send it again since common code already has check in case EOP is sent earlier. BUG=b:211085685 BRANCH=firmware-brya-14505.B TEST=Tested on Brya system before and after the changes. Observed ~40ms savings in boot time. Change-Id: I9401d5e36ad43cdc0dfe947aabc82528d824df9b Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-03-10intel/common/block/cse: Add option to send EOP early via SoCMAULIK V VAGHELA
Earlier while trying to optimize boot time End Of Post (EOP) time kept increasing (~80 ms) when boot time decreased to around 1 second. This was because CSE was busy with own firmware loading. When EOP was moved later in boot stage it again created issue since CSE got busy with other payload loading for OS boot, so response to EOP got delayed by ~70-80 ms. In order to avoid delayed response, coreboot has to send EOP in stage when CSE is done with firmware init and it will be ready to serve EOP as soon as possible. This also aligns with previous flow where FSP used to send EOP once silicon init is done and coreboot used to rely on FSP to send this message. Moving EOP to BS_DEV_INIT boot state meets this requirement and CSE EOP time reduces from ~60 ms to ~20 ms on Brya QS board. Since this setting might vary for each SoC, SoCs can decide when to send EOP in the boot sequence. This patch adds Kconfig option to send EOP via SoC BUG=b:211085685 BRANCH=firmware-brya-14505.B TEST=Code compilation is fine for Brya board. Boot time test is done using entire patchset and EOP time is reduced to ~25ms from earlier ~80ms. Change-Id: I9c7fe6f8f3fadb68310d4a09692f51f82c737c35 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-10soc/apollolake: Hook up VTD to CMOSSean Rhodes
Hook up vtd_enable to CMOS value of "vtd". Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I16b43f0489f652d650e820c36b2b9bea61cf3c8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10soc/apollolake: Correct SMBus interruptSean Rhodes
This solved the error: i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A i801_smbus 0000:00:1f.1: PCI INT A: not connected i801_smbus 0000:00:1f.1: SPD Write Disable is set i801_smbus 0000:00:1f.1: SMBus using polling Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Idebd581b7ed6d193d83340b7dc94248df43525c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-10soc/mediatek/mt8186: Modify internal capid to 0xE0Rex-BC Chen
The mainboard may not be able to disable the internal cap, so we want to set 0xe0 for all boards to minimize the internal cap. And a mainboard implementation may choose XTAL with higher cload if the frequency requirement is met, and the total capacitance can be tuned externally for different boards. BUG=b:218439447 TEST=set capid to 0xe0. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2139e6b3456d7a50e3cdc8fc606e5f6ea3406044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62563 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/intel/common: Include Meteor Lake device IDsWonkyu Kim
Reference: chapter2 in Meteor Lake EDS vol1 (640228) Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie71abb70b88db0acec8a320c3e2c20c54bbb4a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62581 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/amd/*/lpc: rename SPIROM_BASE_ADDRESS_REGISTERFelix Held
Rename SPIROM_BASE_ADDRESS_REGISTER to SPI_BASE_ADDRESS_REGISTER to clarify that this isn't the address the SPI flash gets mapped, but the address of the SPI controller MMIO region. This also aligns the register name with the PPR. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifd9f98bd01b1c7197b80d642a45657c97f708bcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-09drivers/wifi,soc/intel/adl: Move CnviDdrRfim property to driversTim Wawrzynczak
Some non-SoC code might want to know whether or not the CNVi DDR RFIM feature is enabled. Also note that future SoCs may also support this feature. To make the CnviDdrRfim property generic, move it from soc/intel/alderlake to drivers/wifi/generic instead. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Idf9fba0a79d1f431269be5851b026ed966600160 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
2022-03-09soc/mediatek/mt8186: set pin drive strength to 8mA for NORRex-BC Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.1, 5.6 and 5.8 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=SPI SI tests for AP to NOR pass for both kingler and krabby. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5b6e37b0f7d4207ea35f11394d25ad1e096ac01a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09soc/intel/common: Add Kconfig to enable compression on ME_RW blobsKrishna Prasad Bhat
Add SOC_INTEL_CSE_LITE_COMPRESS_ME_RW Kconfig to enable compression on ME_RW blobs. Select the Kconfig to add LZMA compressed ME_RW blobs to ME_RW_A/B regions. On ADL-N, this results in savings of ~665KB in each of ME_RW_A/B regions. FMAP REGION: ME_RW_A Name Offset Type Size Comp me_rw 0x0 raw 1275246 LZMA (1957888 decompressed) (empty) 0x1375c0 null 193056 none FMAP REGION: ME_RW_B Name Offset Type Size Comp me_rw 0x0 raw 1275246 LZMA (1957888 decompressed) (empty) 0x1375c0 null 193056 none Change-Id: I2e31c358b4969b077d65ce6369a877914d573aed Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/apollolake: Hook up CnviMode to devicetreeSean Rhodes
Hook PCH_DEVFN_CNVI (0c.0) to CnviMode. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8b51e98952a39bd432e9bc63eea57a40dd6cf106 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09commonlib/bsd: Remove cb_err_tJulius Werner
cb_err_t was meant to be used in place of `enum cb_err` in all situations, but the choice to use a typedef here seems to be controversial. We should not be arbitrarily using two different identifiers for the same thing across the codebase, so since there are no use cases for serializing enum cb_err at the moment (which would be the primary reason to typedef a fixed-width integer instead), remove cb_err_t again for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/mediatek: Add PCIe supportJianjun Wang
Add PCIe support for MediaTek platform. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) - linux/drivers/pci/controller/pcie-mediatek-gen3.c This code is based on MT8195 platform, but it should be common in each platform with the same PCIe IP in the future. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-08soc/intel/tgl: chipset devicetree: correct TraceHub device aliasMichael Niewöhner
Device 1f.7 is TraceHub, not the PCH Thermal device, which doesn't exist anymore on TGL. Correct the device´s alias. Reference: Intel doc# 631119-007 Change-Id: I30a4ab1e801f6cdb0f2e03f105bf8cc09592eed8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-08soc/intel/tgl: drop orphaned VR domains enumMichael Niewöhner
Change-Id: I937bdf032e1ed86900334d41655f3e6272f66a6f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08timestamps: Rename timestamps to make names more consistentJakub Czapiga
This patch aims to make timestamps more consistent in naming, to follow one pattern. Until now there were many naming patterns: - TS_START_*/TS_END_* - TS_BEFORE_*/TS_AFTER_* - TS_*_START/TS_*_END This change also aims to indicate, that these timestamps can be used to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-08util/ifdtool: Add support for Denverton SoCJeff Daly
Denverton is a special version of IFD2 flash layout. It defines 10GbE firmware regions (11/12) and the IE (10) region which other IFD2 platforms do not have. Denverton does not include the legacy GbE region (3) or the EC region (8) which other IFD2 platforms do have. TEST='ifdtool -p dnv coreboot.rom' and verify correct output Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Change-Id: I15939ce4672123f39a807d63c13ba7df98c57523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08device/mmio.h: Move readXp/writeXp helpers to device/mmio.hJianjun Wang
These helpers are not architecture dependent and it might be used for different platform. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ic13a94d91affb7cf65a2f22f08ea39ed671bc8e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62561 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-07soc/intel/tigerlake: Hide PMC and IOM devicesMichał Kopeć
Windows complains on missing drivers for these ACPI devices. Hide them from OS as it doesn't influence the hardware operation. Linux can still probe the drivers correctly. TEST=Boot Windows 11 and see there are no devices with missing drivers. Boot Ubuntu 20.04 and check that drivers corresponding to ACPI HIDs are still probed. Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I6c30c08ab730749bddef7ea67c7470c1554bd572 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07soc/intel/alderlake: Use Kconfigs for Descriptor RegionSridhar Siricilla
The patch uses Kconfigs for Descriptor Region and Descriptor Region size instead of locally defined macros TEST=Build and boot Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I3f9461c8604383f995a4438f45286b14fb94deaa Reviewed-on: https://review.coreboot.org/c/coreboot/+/62264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2022-03-07soc/intel/alderlake: Define Kconfigs for Descriptor RegionSridhar Siricilla
The patch defines Kconfigs for FMAP Descriptor Region and Descriptor Region size. The Kconfigs will be used by follow-up patches. TEST=Build Brya code Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia3481acefbda885617607675aef2afbb81c21c77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-03-04soc/mediatek/mt8195: Update header version from 1.8.1 to 1.9.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Id82cbef9cb10dba71489ea96f67c329de9aadc49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 21:39:23 +0000