summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2022-08-12soc/intel/meteorlake: Provide access to IOE through P2SB SBI for TCSSJohn Zhao
This change provides access to IOE through P2SB Sideband interface for Meteor Lake TCSS functions of pad configuration and Thunderbolt authentication. There is a policy of locking the P2SB access at the end of platform initialization. The tbt_authentication is read from IOM register through IOE P2SB at early silicon initialization phase and its usage is deferred to usb4 driver. BUG=b:213574324 TEST=Built coreboot and validated booting to OS successfully on MTLRVP board. No boot hung was observed. Change-Id: Icd644c945bd293a8b9c4a364aaed99ec4a7c12f9 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-12soc/intel/common: Delete the TBT authenticaton functionJohn Zhao
Delete the Thunderbolt authentication function ioe_tcss_valid_tbt_auth from the common block. Meteor Lake Platform will implement it. BUG=b:213574324 TEST=Built coreboot image successfully. Change-Id: I97a289faa6351fe562f91d8478b72c9403ce88cb Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-12soc/intel/alderlake: Fix DDR5 channel mappingAngel Pons
DDR5 memory modules have two separate 32-bit channels (40-bit on ECC memory modules), and the SPD info refers to one channel: the primary bus width is 32 (or 40) bits and the "DIMM size" is halved. On Alder Lake, there are 2 memory controllers with 4 32-bit channels each for DDR5. FSP has 16 positions to store SPD data, some of which are only used with LPDDR4/LPDDR5. To try to make things less confusing, FSP abstracts the DDR5 channels so that the configuration works like on DDR4. This is done by copying each DIMM's SPD data to the other half-channel. Thus, fix the wrapper parameters for DDR5 accordingly. Tested on AlderLake-P DDR5 RVP (board ID 0x12), both DIMM slots now function properly. Without this patch, only the top slot would work. Change-Id: I5f01cd77388b89ba34d91c2dc5fb843fe9db9826 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Tested-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66608 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-12soc/intel/meteorlake: Have non prefetchable MMIO for IGD BAR0Wonkyu Kim
Enable SOC_INTEL_GFX_NON_PREFETCHABLE_MMIO for MTL to fix guc driver failure. BUG=b:241746156 TEST=boot to OS and check guc driver loading successful Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifc20935bccdda55db3e57eecd37a4260b3f1a2d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66613 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-12soc/intel/common: Ignore prefetch PCI attribute for IGD BAR0Wonkyu Kim
From Meteorlake, IGD BAR0(GTTMMADR) is changed to 64bit prefetchable. Due to the prefetchable attribute, resource allocation for IGD BAR0 is assigned WC memory and it causes kernel driver failure. For avoiding kernel driver failure, ignore prefetch PCI attribute for IGD BAR0 to assign UC memory. We're working on publishing below information. - IGD BAR0(GTTMMADR) is changed to 64bit prefetchable BAR - GTTMMADDR BAR should be always mapped as UC memory although marked Pre-fetchable. BUG=b:241746156 TEST=boot to OS and check guc driver loading successful Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I76d816d51f32f99c5ebcca54f13ec6d4ba77bba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66403 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-11treewide: Rename Sabrina to MendocinoJon Murphy
'Mendocino' was an embargoed name and could previously not be used in references to Skyrim. coreboot has references to sabrina both in directory structure and in files. This will make life difficult for people looking for Mendocino support in the long term. The code name should be replaced with "mendocino". BUG=b:239072117 TEST=Builds Cq-Depend: chromium:3764023 Cq-Depend: chromium:3763392 Cq-Depend: chrome-internal:4876777 Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-08-11src/mb: Add SPDX identifiers to files missing themMartin Roth
This adds SPDX identifiers to the remaining source files in the mainboard directory that don't already have them. Change-Id: I1adc204624f3ab6fcafd8fbb239e6d69e057973a Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66498 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-11src/soc/intel/mtl: Add VPU supportSrinidhi N Kaushik
This change adds support for enabling VPU on MTL SoC. BUG=b:240665069 TEST=build coreboot mtlrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie79b45f34a669b9ff777599cb85217abac6cb74e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2022-08-10soc/intel/tigerlake: Add USBOTG and CrashLog to irq tableFrans Hendriks
FSP reports missing IRQ for devices. Add USBOTG (D20:F1) and CrashLog & Telemetry (D10:F0) to irq_constrain. Bug = N/A TEST = Build and boot Siemens AS-TGL1 Change-Id: Ic02d33045a07a6888ba97d8f2c6fa71bc7e363e8 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-10mb/google/{zork,guybrush,skyrim},soc/amd/espi: Fix vw_irq_polarityRaul E Rangel
The default state for the IRQ lines when the eSPI controller comes out of reset is high. This is because the IRQ lines are shared with the other IRQ sources using AND gates. This means that in order to not cause any spurious interrupts or miss any interrupts, the IO-APIC must use a low polarity trigger. On zork/guybrush/skyrim the eSPI IRQs are currently working as follows: * On power on/resume the eSPI controller drives IRQ 1 high. * eSPI controller gets configured to not invert IRQ 1. * OS configures IO-APIC IRQ 1 as Edge/High. * EC writes to HIKDO (Keyboard Data Out) which causes the EC to set IRQ1 high. * eSPI controller receives IRQ 1 high, doesn't invert it, and leaves IRQ 1 as high. This results in missing the first interrupt. * When the x86 reads from HIKDO, the EC deasserts IRQ1. This causes the eSPI controller to set IRQ1 to low. We are now primed to catch the next edge high interrupt. This is generally not a problem since the linux driver will probe the 8042 with interrupts off. On S3/S0i3 resume since the eSPI controller comes out of reset driving the IRQ lines high, we trigger a spurious IRQ since the IO-APIC is configured to trigger on edge high. This results in the 8042 controller getting incorrectly marked as a wake trigger. By configuring the IO-APIC to use low polarity interrupts, we no longer lose the first interrupt. This also means we can use a level interrupt to match what the EC actually asserts. We use the `Interrupt` keyword instead of the `IRQ` keyword in the ACPI because the linux kernel will ignore the level/polarity parameters for the `IRQ` keyword and default to `edge/high. `Interrupt` doesn't have this problem. The PIC is not currently configured anywhere and it defaults to an edge/high trigger. We could add some code to configure the PICs trigger register, but I don't think we need the functionality right now. For zork and guybrush, this change is a no-op. eSPI is configured in verstage which is located in RO, and we have already locked RO for these devices. We will need to figure out how to properly set the `vw_irq_polarity` for these devices. BUG=b:218874489, b:160595155, b:184752352, b:157984427, b:238818104 TEST=On zork, guybrush and skyrim $ suspend_stress_test --post_resume_command 'cat /sys/devices/platform/i8042/serio0/wakeup/wakeup35/active_count' Verify keyboard works as expected and no interrupt storms are observed. On morphius I verified keyboard and mouse work on windows as well. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4608a7684e34ebb389e0e55ceba7e7441939afe7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-08soc/amd/sabrina: Rename PSP SPL defaultMarshall Dawson
Change the SPL file from the 'cezanne' placeholder to a mendocino filename. Also, move the default location to blobs/mainboard since it's not board-agnostic. BUG=b:241543152 BUILD=Enable feature and build amd/chausie Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I47647c5d926484e25e3f893e72c671554e277a56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-08-08soc/amd/sabrina: Rename PSP whitelist defaultMarshall Dawson
Change the name of the whitelist file from the 'cezanne' placeholder to a mendocino path/to/file. Also, as whitelist files won't be pushed into a public repo, modify the path to point to site-local. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I49bbf1335606567735e36ed9bda1314bfc6247d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07soc/amd/sabrina: Use new mendocino amd_blobsMarshall Dawson
Modify sabrina's fw.cfg to point to the proper directory and use the standard names, as released by AMD. The name 'sabrina' was an alias used for the Mendocino product. The public-facing builds have been using Cezanne blobs, renamed as Sabrina or SBR, but can now take advantage of the appropriate blobs. BUG=b:239072117 TEST=Build amd/chausie Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Id646844e41980802be1e39dce96e5adaace4311d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07soc/intel/alderlake: Fix RPL-P 282 15W GT ICC MAXJeremy Compostella
The software used to read the document listing the VR settings turns out to not be perfectly compatible. Indeed, it displays a value of 55A for RPL-P 282 15W GT ICC MAX while the correct value actually is 40A. After a thorough review using the software used to create the document, it is the only value presenting a discrepancy. BRANCH=firmware-brya-14505.B BUG=b:239797178 TEST=build and boot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Iee293c87a66f0cd32714766e3ad81eee1a411723 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-07soc/amd/sabrina: Enable PSP Crypto Co-Processor (CCP) DMAKarthikeyan Ramasubramanian
Boot issue while using FW slot A has been root-caused to the usage of same TLB to map HW Crypto engines and SPI flash. With upcoming PSP release, this TLB usage conflict has been resolved. Hence enable CCP DMA. BUG=b:240175446 TEST=Build and boot to OS in Skyrim with PSP verstage using CCP DMA. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I2b12adb7e94e489bf07963a6f9a829cf4b36ad5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07soc/amd/sabrina: Re-init eSPI in bootblockKarthikeyan Ramasubramanian
Currently bootblock does not initialize eSPI if it is already done in PSP verstage. But some other component is clobbering the eSPI configuration causing timeouts in EC communication after the boot flow hits x86. To workaround this issue, re-initialize eSPI in bootblock. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP verstage. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I41c0b2816a106a6a547f3cb372693e1bb7f23734 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07soc/intel/tigerlake: Expose In-Band ECC config to mainboardFrans Hendriks
Support for feature "In-Band ECC" not available for Tiger Lake Similar to Elkhart Lake, Tiger Lake also provides this feature. Ported from Elkhart Lake (CB:55668) Bug = N/A TEST = Build and boot Siemens AS-TGL1 Change-Id: Ie54d5f6a9747fad0105d0f8bf725be611bb8cf60 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-05soc/intel/mtl: Remove deprecated FSP optionSrinidhi N Kaushik
Remove the reference to `CpuCrashLogDevice` UPD since FSP v2304.01 has deprecated this UPD. BUG=b:240665069 TEST=build rex coreboot Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I23223fd7936a60d974229b553de255a7dcf4416b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66357 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-04soc/amd/cezanne/cppc: drop duplicate newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I774be6d80e0aae725ecb1027501c8d66e0bf5a08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-04soc/amd/cezanne/cppc: reduce visibility of cpu_init_cppc_configFelix Held
This function is only called from the same compilation unit, so turn it into a static function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5c2deaa46f69c763df9612e39415b37c60d631be Reviewed-on: https://review.coreboot.org/c/coreboot/+/66398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-03soc/mediatek: Move common definitions to dramc_soc_common.hRex-BC Chen
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and MT8186, so we move them to dramc_soc_common.h TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03soc/intel/alderlake: Add config for IoT FSP supportLean Sheng Tan
Add new config FSP_TYPE_IOT to add the IoT FSP option so that respective mainboard Kconfig can use IoT FSP if needed. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-03soc/soc/intel: Add UFS device with ref-clk-freq propertyMeera Ravindranath
UFS storage devices require the bRefClkFreq attribute to be set to operate correctly in high speed mode. The correct value is determined by what the SoC / board supports. For the ADL UFS controller, it is 19.2 MHz. a) Introduce a new ACPI property "ref-clk-freq". b) Add support to configure this property using an SoC Kconfig. Kernel patch: https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/ 20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/ BUG=b:238262674 TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel correctly parses ref-clk-freq as 19.2 MHz. Scope (\_SB.PCI0) { Device (UFS) { Name (_ADR, 0x0000000000120007) // _ADR: Address Name (_DDN, "UFS Controller") // _DDN: DOS Device Name Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "ref-clk-freq", 0x0124F800 } } }) } } Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Reka Norman <rekanorman@chromium.org> Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-03soc/amd/sabrina/fch: enable XTAL pad disabling in S0i3Felix Held
Switching off the pads of the internal crystal oscillator that connect to the crystal on the board in S0i3 saves a little power, so enable it. No measurements to quantify the power savings have been made. PPR #57243 revision 1.59 was used as a reference. BUG=b:237647468 TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I52f14ae5c614ad8ff0479b619de7164afa1e7648 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66336 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-03qualcomm/sc7280: Add support for edp and mdp driverVinod Polimera
- Add support for edp aux read and write. - Update edp panel properties based on edid read. - Configure edp controller and edp phy. Panel details: Manufacturer: SHP Model 1523 Serial Number 0 Made week 53 of 2020 EDID version: 1.4 Digital display 8 bits per primary color channel DisplayPort interface Maximum image size: 31 cm x 17 cm Gamma: 220% Check DPMS levels Supported color formats: RGB 4:4:4 Default (sRGB) color space is primary color space First detailed timing is preferred timing Supports GTF timings within operating range Established timings supported: Standard timings supported: Detailed timings Hex of detail: 5a8780a070384d403020350035ae10000018 Detailed mode (IN HEX): Clock 346500 KHz, 135 mm x ae mm 0780 07b0 07d0 0820 hborder 0 0438 043b 0440 0485 vborder 0 -hsync -vsync Did detailed timing Hex of detail: 653880a070384d403020350035ae10000018 Detailed mode (IN HEX): Clock 144370 KHz, 135 mm x ae mm 0780 07b0 07d0 0820 hborder 0 0438 043b 0440 0485 vborder 0 -hsync -vsync Hex of detail: 000000fd003090a7a7230100000000000000 Monitor ranges (bare limits): 48-144Hz V, 167-167kHz H, max dotclock 350MHz Hex of detail: 000000fc004c513134304d314a5734390a20 Monitor name: LQ140M1JW49 Changes in V2: - Remove Misc delays in edp code. - Move mdss soc code to disp.c - Update EDID read using I2C write & read. Changes in V3: - Remove unrelated delays. - Misc changes. BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Monitor name: LQ140M1JW49 Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Change-Id: If89abb76028766b19450e756889a5d7776106f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-08-02soc/intel/alderlake: Configure DDR5 Physical channel width to 64Meera Ravindranath
A DDR5 DIMM internally has two channels each of width 32 bit. But the total physical channel width is 64 bit. BUG=b:180458099 TEST=Boot DDR5 to kernel Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-02soc/intel/alderlake: Add IRQ constraints for CPU PCIe portsTim Crawford
Copy the constraint from ADL-S to ADL-P. Fixes the following warning in Linux on System76 oryp9, which has an NVIDIA GPU on the bridge. pcieport 0000:00:01.0: can't derive routing for PCI INT A This, in turn, resolves an IRQ conflict with the PCH HDA device that would cause a stack track on every boot. irq 10: nobody cared (try booting with the "irqpoll" option) <snip> [<00000000bf549647>] azx_interrupt [snd_hda_codec] Disabling IRQ #10 Change-Id: I550c80105ff861d051170ed748149aeb25a545db Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66285 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01soc/amd/common/block/apob/apob_cache.c: Add assert for APOB DRAM sizeFred Reitberger
Add static check to ensure the reserved APOB DRAM space is the same size as the MRC_CACHE region specified in the fmap. Update sabrina APOB DRAM size to match the fmap. TEST: Timeless builds identical. Test build with a larger MRC_CACHE than APOB DRAM failed the assert as expected. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ia14f6ef94b9062df0612fe96098b1012085ccf9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65878 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01soc/qualcomm: Fill coreboot table with PCIe infoVeerabhadrarao Badiganti
In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: I1ca2be55b98c8d1b86576072078cdda02ac55940 Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57614 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-01soc/qualcomm/sc7280: Enable PCIe driverPrasad Malisetty
Enable PCIe functionality on sc7280 and supply all the needed data for PCIe generic platform driver. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe card (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path, that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: I1f79a0ae2dea594d6026d55a15978eeb92a8ff18 Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66148 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01Revert "UPSTREAM: soc/amd/sabrina,vc/amd/fsp/sabrina: Add UART support for ↵Karthikeyan Ramasubramanian
Sabrina" This reverts commit 78261e308de5361b2ff045091e8fb18cad2a5035. Reason for revert: Now that PSP supports a soft fuse flag to toggle the verstage serial logs, prevent PSP verstage from writing to the UART. BUG=None TEST=Build and boot to OS in Skyrim with PSP verstage. Ensure that PSP verstage logs are not seen twice in the console. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7ef2d585c320ea5903197939136dd2049a71af95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-01soc/amd/sabrina: Enable HW Modexp engineKarthikeyan Ramasubramanian
HW Modexp engine is verified to be working fine. Any verification failures during PSP verstage are because the firmware body is not read correctly. This might be because of the incorrect SPI ROM mapping. Hence enable the HW modexp engine for keyblock, preamble and firmware body verification. BUG=b:240175446 TEST=Build and boot to OS in Skyrim with PSP verstage using one of the FW slots. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8f6742630a7049354a24053fce28c477e53259e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-31soc/qualcomm: Add PCIe supportPrasad Malisetty
Add PCIe platform driver for Qualcomm platforms. Reference: - linux/drivers/pci/controller/dwc/pcie-qcom.c - Linux driver base commit: 82a823833f4e3769e82cdb4df1bc2234bc65b16c BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe card (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path, that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: Iccf60aa56541f5230fa9c3f821d7709615c36631 Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53902 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add SPI supportLiya Li
The gpios and the tick delay register are different between MT8188 and previous MediaTek SoCs, so we need to add this patch to support SPI. TEST=build pass BUG=b:236331724 Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com> Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Create GET_TICK_DLY_REG macro for SPI tick delay settingRex-BC Chen
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which is different from previous SoCs, so we define a macro to get the designated register. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add clk_buf support in romstageSong Fan
TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add RTC supportSong Fan
Add RTC header file for SoC-specific settings. Add RTC support in romstage. TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move common definitions from rtc.h to rtc_reg_common.hRex-BC Chen
Move the common definitions to rtc_reg_common.h, so we can reuse those definitions on MT8188. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add AUXADC supportHui Liu
TEST=get voltage as 340mV for channel 0 in MTK EVB. BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-29soc/mediatek: Move struct mtk_auxadc_regs to auxadc_common.hRex-BC Chen
The AUXADC register definitions are the same for all MediaTek SoCs, so we move struct mtk_auxadc_regs to auxadc_common.h. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-29soc/intel/alderlake: Add missing TDP and Power Limits for ADL-SMichał Żygowski
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0. The System Agent PCI IDs were not present in older 2.1 revision of DOC #619501. Now that the mapping of these IDs to SKUs is known, fill the missing TDPs and Power Limit settings based on DOC #626343. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29soc/intel/alderlake: Set VccIn Aux Imon IccMax for ADL-S 4+0 and 2+0Michał Żygowski
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure VccIn Aux Imon IccMax. They were not present in older 2.1 revision of DOC #619501. Based on DOC #619501 rev 2.6. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29soc/intel/alderlake/vr_config.c: Add VR params for ADL-SMichał Żygowski
Based on DOC #619501, #634885, #626343. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29intel/pmclib: Avoid PMC ABASE read of SLP_TYP and STATUS in ramstageHarsha B R
The patch updates platform_is_resuming() API such that platform resume state is determined from the saved state (CBMEM) instead of checking PMC registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early) ramstage. coreboot sends DISCONNECT IPC command which times out during resume (S3) if system has servoV4 connected on port0. The issue occurs only during the first cycle of resume (S3) test cycle after cold boot due to side effect of platform_is_resuming() API that is not determining the resume (S3) state correctly in ramstage. PM1_STS and PM1_CNT register gets cleared at the start of ramstage. platform_is_resuming() function was checks the cleared register value and fails the condition of resume (S3) resulting in sending DISCONNECT IPC command. Checking the platform resume state from the CBMEM saved state using acpe_get_sleep_type() function helps cross verify the system previous state at the later part of ramstage. localhost ~ # cbmem -c | grep ERROR [ERROR] EC returned error result code 3 [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0x200a7 failed [ERROR] pmc_send_ipc_cmd failed [ERROR] Failed to setup port:0 to initial state [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0x200a7 failed [ERROR] pmc_send_ipc_cmd failed [ERROR] Failed to setup port:1 to initial state [ERROR] GENERIC: 0.0 missing read_resources [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0xd0 failed [ERROR] PMC: Failed sending PCI Enumeration Done Command BUG=b:227289581 TEST=Verified system boots to OS and verified below tests on Redrix (ADL-P) and Nivviks (ADL-N) 1. coreboot doesn't send the DISCONNECT during S3 resume 2. suspend S3 passes with both suzyq and servoV4 connected 3. After S3 resume, system detects the pen drive with Superspeed 4. After system resumes from S3, hot-plug the pen drive, system detects the pen drive Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/intel/common/sata: Add APL and GLK SATA PCI IDsSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0ae8c6624b79ce6c269244bd1435900d4d7f997a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-28soc/intel/alderlake: Add support for more CPU PCIe RP UPDsTim Wawrzynczak
There are 3 more CPU PCIe RP UPDs that are the current code is not setting, and some boards may want to set these, so this patch adds support to set these UPDs. The default values for any existing boards using these UPDs should not change with this patch. The UPDs are: - CpuPcieRpDetectTimeoutMs - CpuPcieRpAspm - CpuPcieRpSlotImplemented Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-28soc/intel/alderlake: Enable LPIT supportJeremy Soller
Add SLP_S0 residency register and enable LPIT support. Change-Id: I45e1fc9df3e782cdaac810af3189c5797b1fe413 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28soc/intel/alderlake: Set Energy Perf Bias appropriate default valueJeremy Compostella
The current "normal" EPB (six) setting resulted in the desired out of box power and performance for several CPU generations. However, a power and performance analysis on Alder Lake and Raptor Lake CPUs demonstrates that this value results in undesirable higher uncore power and that seven is a more appropriate value. Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific normal EPB value" patch sets the EPB to 7 for Alder Lake. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-28soc/intel/alderlake: Enable Energy/Performance Bias controlJeremy Compostella
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL must be set to be able to set the Energy/Performance Bias using MSR IA32_ENERGY_PERF_BIAS. Note that since this bit was not set until this patch, the `set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in `soc_core_init()` was systematically failing. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28soc/intel/meteorlake: Fix GPIO reset mapping as per GPIO BWGSubrata Banik
This patch fixes the documentation discrepancy of GPIO reset type between PCH EDS and GPIO BWG. As per GPIO BWG, there are four GPIO reset types in Meteor Lake as below: - Power Good - (Value 00) - Deep - (Value 01) - Host Reset/PLTRST - (Value 10) - Global Reset for GPP - (Value 11) Also, dropped the need for having dedicated reset type for GPIO community 3. As per the MTL EDS, all GPIO communities have the same reset type. BUG=b:213293047 TEST=Able to build and boot Google/Rex without below error msg. [ERROR] gpio_pad_reset_config_override: Logical to Chipset mapping not found Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id7ea16d89b6f01b00a7b7c52945f6e01e8db6cbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/66155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Will Kim <norwayforest92@gmail.com>
2022-07-28soc/intel/gpio: Add new macro for GPP PAD reset type as `Global Reset`Subrata Banik
This patch introduces a new macro for GPP PAD reset type as `Global Reset` as documented in Alder Lake EDS doc 630603. BUG=b:213293047 TEST=Able to build Google/Kano with this change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I39428911babc393dd10750801522a00d0b26d3e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-27soc/amd/sabrina: Disable CCP DMA and HW MODEXPKarthikeyan Ramasubramanian
Enabling them causes firmware keyblock/preamble and/or body verification failure. Hence disabling them to use software based verification. Re-enable them once the issue is root-caused. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP and x86 verstage. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7e259ae5d790977d08afcb0a77f8d4f38c85f39e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66134 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-27soc/amd/sabrina: Do not pass SHA operation modeKarthikeyan Ramasubramanian
Currently only SHA_GENERIC is used and does not need to be passed. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP and x86 verstage. Change-Id: Id705b1361fffaf940c51515e7f77d7fb0677fc4a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-27soc/intel/meteorlake: Use coreboot native event handler for FSP-SSrinidhi N Kaushik
Beginning FSP 2.2 specifications Fsps Config Upd "FspEventHandler" was moved to Fsps Arch Upd. Hence we were not seeing Fsps Debug log was not using coreboot debug library. This change assigns Fspd Arch Upd FspEventHandler with coreboot ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER Kconfig is enabled. Before: Dumping FSPS_UPD - Size: 0x00001510 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 0x00 0x00 0x00000010: 0x00 With the fix: [SPEW ] Dumping FSPS_UPD - Size: 0x00001528 [SPEW ] 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 [SPEW ] 0x00000010: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [SPEW ] 0x00000020: 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0xAA [SPEW ] 0x00000030: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [SPEW ] 0x00000040: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 BUG=b:237263080 TEST=Able to build and boot MTL RVP, verified the FSP-S debug log is using coreboot debug library. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie63258f6427b3da7927a866bc3767f548b16e3e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-27soc/mediatek/mt8195: Skip PCIe ops for eMMC SKUsYu-Ping Wu
To avoid unnecessary PCIe early initialization for non-NVMe devices (which would take about 150ms on dojo), skip setting PCIe ops when initializing mt8195 SoC. BUG=b:238850212 TEST=emerge-cherry coreboot TEST=Dojo SKU1 (eMMC) boot time <= 1s BRANCH=cherry Change-Id: I8945890ba422c0c4eb42683935220b7afbb80dfd Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-27mb/google/cherry: Introduce mainboard_needs_pcie_initYu-Ping Wu
Implement mainboard_needs_pcie_init() for cherry as a callback for mt8195 SoC to determine whether to initialize PCIe. When the SKU id is unknown or unprovisioned (for example at the beginning of the factory flow), we should still initialize PCIe. Otherwise the devices with NVMe will fail to boot. BUG=b:238850212 TEST=emerge-cherry coreboot BRANCH=cherry Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-26soc/mediatek/mt8188: Initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. It takes 21 ms to load sspm.bin. coreboot logs: CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4 mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes) TEST=we can see the sspm logs. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-26soc/mediatek/mt8188: Initialize MCUPMRex-BC Chen
Load MCUPM firmware and boot up MCUPM in ramstage. It takes 41 ms to load mcupm.bin. coreboot logs: CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0 mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes) TEST=we can see the mcupm logs after reset releases. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-25Revert "soc/intel/meteorlake: Align TCSS functions through SBI"Subrata Banik
This reverts commit b57d172fbb5265d632c031532fcc2aec156e065a. Reason for revert: Results into hard hang with serial debug msg as below: `[EMERG] Unable to unhide the P2SB device!` Intel team is working towards to fix this issue. BUG=b:239806774 TEST=Able to boot the Intel/MTLRVP with this revert. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic6be37c000afdf4f0c6c22497c233aa0bbc49d48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65500 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-25soc/intel/meteorlake: Choose PCR write to lock GPIO PADSubrata Banik
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR config on Meteor Lake to instruct Pad Configuration Lock. BUG=b:211573253, b:211950520, b:213596994 TEST=Able to perform GPIO lock programming without error on MTLRVP. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icd123adb02716149fa51c9e4c987c281f9de2f43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-25soc/intel/gpio: Update GPIO Lock configuration recommendationSubrata Banik
This patch updates the GPIO lock configuration recommendation kconfig string to ensure the SoC user can select the correct config as applicable for the SoC. Note: From MTL onwards GPIO lock config can be performed using PCR write (MMIO write) and the GPIO team has confirmed this. BUG=b:213596994 TEST=Able to fix below GPIO lock config error msg on MTL with `SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR` kconfig enabled. [INFO ] Locking pad configuration using SBI [INFO ] gpio_pad_config_lock_using_sbi: Locking pad 73 configuration [ERROR] SBI Failure: Transaction Status = 1 [ERROR] Failed to lock GPIO PAD, response = 1 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icab1e4849b8e08ee1c695c924599f1513774178f Reviewed-on: https://review.coreboot.org/c/coreboot/+/66113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-25soc/intel/meteorlake: Debug consent is set to 3 (USB3 DbC)Subrata Banik
This patch ensures the debug consent value is matching with the inline comment. TEST=Able to build the Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icf72eb2aa4064fd78f4f99570a4cf44e41932ec3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66008 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-24intel/common/block/ipu: Add MTL IPU device idWonkyu Kim
TEST=Build mtlrvp and check IPU0 ACPI ojbect from ssdt Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib5c3d455d272af0e753c775a5fd3f19851b7937d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66056 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-23soc/intel/alderlake: Hide PMC and IOM devicesJeremy Soller
Hide these ACPI device so Windows does not warn about missing device drivers. Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-22soc/apollolake: Don't select VBNV_CMOS if VBNV_FLASH is enabledSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If8af4657508f00feff8525b0135c7f73c1959965 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-22soc/mediatek/mt8188: Add eMMC and SD card configurationsAndy-ld Lu
Geralt reference design has both eMMC and SD card interfaces, so we have to configure both in ramstage. Implement msdc.c (mass storage device class) to place the eMMC and SD card drivers. This implementation is based on chapter 5.9 in MT8188 Functional Specification. TEST=boot to kernel using emmc successfully. BUG=b:236331724 Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com> Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/geralt: Implement regulator interfaceHui Liu
Control regulator more easily with regulator interface. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Use boolean type for "enable" argument for regulatorRex-BC Chen
Because 0 and 1 are the only possible values, 1. Change input argument "enable" of mainboard_enable_regulator to bool. 2. Change return value of mainboard_regulator_is_enabled() to bool. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Replace some strings in regulator.cRex-BC Chen
From comments of CB:65875, we replace *_vol to *_voltage. s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/ s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/ TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek/mt8188: Add VMCH, VMC support for MT8188Hui Liu
For MT8188, we need to enable and adjust VMCH and VMC to support SD cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21soc/mediatek/mt8188: Add PMIF and PMIC init supportHui Liu
Add PMIF, SPI, SPMI and PMIC init code. These PMIC settings are used by MediaTek internally. We can find these registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and "MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek designers. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek: Create a function to check ulposcRex-BC Chen
We will use the same drivers for checking ulposc in MT8188, so we add a new function pmif_ulposc_check() to common. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20soc/amd/common/block/spi/fch_spi_ctrl: Fix restricted command writeFred Reitberger
The SPI_RESTRICTED_CMD register is not a PCI configuration register. It is memory mapped from the SPI bar. Verified against PPR 55570 rev 3.16, PPR 56569 rev 3.03, and PPR 57243 rev 1.50 TEST=Compile tested only Change-Id: I7c88aaea9ddac200644bb368be3bd4e9be47fd7b Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63305 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20arch/arm64,arm: Prepare for !SEPARATE_ROMSTAGEArthur Heymans
Prepare platforms for linking romstage code in the bootblock. Change-Id: Ic20799b4d6e3f62cd05791a2bd275000a12cc83c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-07-20soc/amd/sabrina: Fix boot region address passed to PSPKarthikeyan Ramasubramanian
PSP expects PSP L2 directory address relative to the start of the SPI ROM. Also PSP does not expect BIOS L2 directory address since it is an entry in PSP L2 directory. Update the configuration such that PSP verstage passes the right address to PSP. BUG=b:217414563 TEST=Build Skyrim BIOS image. Ensure that PSP verstage passes the address as expected by PSP. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8dc3aa4cb401d16a68da446f83eb9e68ee290fea Reviewed-on: https://review.coreboot.org/c/coreboot/+/65866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20soc/amd/common/psp_verstage: Fix update_boot_regionKarthikeyan Ramasubramanian
On SoCs where PSP use A/B recovery layout, PSP expects PSP L2 directory address relative to the start of the SPI ROM. Unfortunately there is nothing in the EFS2 header to help identify such SoCs. Hence add a config item to statically identify such SoCs. Also when PSP uses A/B recovery layout, BIOS L2 directory is an entry in the PSP L2 directory. Hence the address of BIOS L2 directory is not part of EFS2 header. Thankfully PSP is able to identify the BIOS L2 directory itself and does not expect PSP verstage to pass the address. Modify PSP verstage to handle these updates. BUG=b:217414563 TEST=Build Skyrim BIOS image. Ensure that PSP verstage returned the PSP L2 directory as expected. Change-Id: I2f856a62055c80b8e2db91c983832611a5f0389c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20soc/amd/sabrina: Do not dump CBMEM pre-bootblock contents to consoleKarthikeyan Ramasubramanian
PSP supports mapping FCH UART and verstage logs are visible in console. Hence pre-bootblock cbmem contents do not have to be dumped to console. BUG=b:238937687 TEST=Build Skyrim BIOS image. Ensure that PSP verstage logs in CBMEM are not dumped to console again during bootblock. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8336e372b894d8b2f9bbfb21ab15a78527dcc4c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20soc/amd/sabrina, mb/google/skyrim: Call espi_switch_to_spi1_padsKarthikeyan Ramasubramanian
Skyrim uses second SPI pads for ESPI. Switch to it initialize ESPI in verstage. BUG=b:217414563 TEST=Build Skyrim BIOS image. Ensure that ESPI init is successful in PSP verstage. Change-Id: I6e3462e95c50d256b6c159ae1d854dd69a538bb0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-07-20treewide: Remove unused <cpu/x86/mtrr.h>Elyes Haouas
Change-Id: Ib852d0b2cf4d3cbdf7475bd5493bf2e585a5894a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-20treewide: Remove unused <cpu/x86/msr.h>Elyes Haouas
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-20soc/apollolake: Add CSE Firmware Status RegistersSean Rhodes
Add the CSE, General Status and Miscellaneous registers and print information from them accordingly. All values were taken from Intel document number 571993. Tested on the StarLite Mk III and the correct values are shown: [DEBUG] CSE: Working State : 2 [DEBUG] CSE: Manufacturing Mode : NO [DEBUG] CSE: Operation State : 1 [DEBUG] CSE: FW Init Complete : NO [DEBUG] CSE: Error Code : 3 [DEBUG] CSE: Operation Mode : 0 [DEBUG] CSE: FPF status : unknown Please note, the values shown are in an error state. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1a5548132dadbb188a33a7ae30a0a1fa144d130f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-20soc/intel/alderlake/fsp_params.c: Set DdrSpeedControl UPDFranklin Lin
When override "max_dram_speed_mts", set the DdrSpeedControl to manual. (0:Auto, 1:Manual) BUG=b:229549930 BRANCH=none TEST=build coreboot without error Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com> Change-Id: Iffbbee8082fb1a41e0ed1db3f4ea9ec4709c9ce7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65877 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20soc/intel/cmn/pch/lockdown: Guard gpmr_lockdown_cfgSean Rhodes
Guard gpmr_lockdown_cfg with SOC_INTEL_COMMON_BLOCK_GPMR so it doesn't run on platforms that don't select this. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iab5bbd399c3a654dcb95eaa8fce683a50c7322f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65227 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-20soc/intel/common/pch: Decouple CLIENT from BASEAngel Pons
In preparation to add a third option, have "Client" platforms select a dedicated Kconfig option instead of the common "_BASE" option. Rewrite the help texts to clarify what "Client" and "Server" mean, because the terms refer to the type of silicon and not to the market segment. Some uniprocessor (single-socket) servers are actually client platforms and there are some multi-socket workstations based on a server platform. Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-19soc/intel/apollolake: Call heci_init in romstageSean Rhodes
Call heci_init to initialise all Heci devices and bring them to d0. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id2865b649331846fc119da7c4be56cc1fed56b8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-19soc/amd/sabrina/fsp_m_params: add UPD pointer parameter to mb callbackFelix Held
This allows the mainboard code to change FSP-M parameters depending on parameters that are only known at run time and not at build time. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3e0e196a5d861acd7635c59db44ecf1970b73ce2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-18soc/qualcomm/sc7280: Support hardware watchdog compilationKshitiz Godara
Add watchdog file compilation and watchdog space memory for sc7280. BUG=b:221393157 TEST=None Signed-off-by: Kshitiz Godara <quic_kgodara@quicinc.com> Change-Id: I6a5c4e55964aa8b4de5a641ca162355591c38fc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-07-18soc/intel/meteorlake: Allow possible options for MP InitSubrata Banik
Ported back from commit ceaf9d116949da68aa9c ("soc/intel/alderlake: Allow possible options for MP Init") This patch creates choice that lists all possible options to perform MP Init as below for Intel Meteor Lake platform: 1. MTL_USE_FSP_MP_INIT: Allow coreboot to bring APs from reset and FSP runs feature programming based and selects MP_SERVICES_PPI_V2 config. 2. MTL_USE_COREBOOT_MP_INIT: Allow coreboot to perform MP Init (both AP init and feature programming) using native implementation. Additionally, selects required RELOAD_MICROCODE_PATCH when coreboot is expected to run MP Init. Refactor SoC code to allow required FSP UPD override based on selected MP Init option. Additionally, added `FIXME` comment to ensure Intel MTL FSP can bring back SkipMpInit UPD in MTL to let coreboot override this UPD and ensure independent MP Init flow. BUG=b:219053812 TEST=Able to build google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic917e4e03e24d73190cfc72c6ed8e59af427bedf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65743 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-18soc/intel/meteorlake: Choose coreboot doing MP Init over FSPSubrata Banik
This patch enables coreboot doing Multiprocessor Initialization (MP) for Meteor Lake CPU using the native coreboot drivers and passes the MP PPI data structure to let FSP to perform CPU feature programming (anything that is restricted) as part of FSP-S. Additionally, modify the kconfig inclusion order alphabetically. BUG=b:219061518, b:219053812 TEST=Able to bring all APs from reset by coreboot and successfully able to perform all CPU feature programming using MP PPI services. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic2781ee0b39e42aa579b72d3d4ee6586d5a89a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65742 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-18soc/intel/meteorlake: Enable `DEFAULT_X2APIC_LATE_WORKAROUND`Subrata Banik
This patch ensures Intel Meteor Lake can enable the X2APIC feature. While debugging Intel Meteor Lake (MTL) based platforms it seems like enabling `DEFAULT_X2APIC` runs into a hang while coreboot tries to bring the application processors (APs) from reset using X2APIC mode. [INFO ] LAPIC 0x10 switched to X2APIC mode. ... [DEBUG] Attempting to start 3 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [ERROR] Not all APs checked in: 0/3. [DEBUG] 0/3 eventually checked in? [ERROR] MP initialization failure. [ERROR] MP initialization failure. Note: The AP bring up flow between XAPIC and X2APIC are the same except the way to access those LAPIC registers. X2APIC expects to access all LAPIC registers using MSR (base with 0x800). The correct flow to enable X2APIC on MTL would be as follows: 1. Let BSP bring all APs in XAPIC mode. [INFO ] LAPIC 0x10 in XAPIC mode. ... [DEBUG] Attempting to start 3 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [INFO ] LAPIC 0x11 in XAPIC mode. [INFO ] LAPIC 0x0 in XAPIC mode. [INFO ] LAPIC 0x80 in XAPIC mode. 2. Call enable_x2apic() function on all CPUs (BSP and APs) And at the end of #2 above, all cores will now switch to X2APIC from XAPIC. [INFO ] Initializing CPU #0 [DEBUG] CPU: vendor Intel device a06a0 [DEBUG] Clearing out pending MCEs [INFO ] LAPIC 0x10 switched to X2APIC mode. ... [INFO ] CPU #0 initialized [INFO ] Initializing CPU #1 [DEBUG] CPU: vendor Intel device a06a0 [DEBUG] Clearing out pending MCEs [INFO ] LAPIC 0x11 switched to X2APIC mode. Note: Intel MTL FSP also follow the same steps for x2APIC enablement while coreboot selects USE_INTEL_FSP_MP_INIT config instead MP_SERVICES_PPI_V2. BUG=b:219061518, b:219053812 TEST=Able to perform coreboot doing AP init with DEFAULT_X2APIC_LATE_WORKAROUND config enabled without running into any hang issue. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie9c8fad6c46b15b5b08c9cc4ef53f2a6872bd0ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/65741 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-18soc/intel/meteorlake: Account for GSPI2 everywhereAngel Pons
Commit e54a8fd43247d767f16a37f3e3150b2915d809bc (soc/intel/meteorlake: Add entry for GSPI2 device) added an entry for the GSPI2 device in the devicetree, but did not add any other entries. Ensure that the rest of the code is aware of the GSPI2 device to avoid any problems. Change-Id: Ib59bd289751bd96402c4adc61ffbee3bebe0edb0 Found-by: Coverity CID 1490681 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-07-18treewide: Don't add bitsElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Id56310bd616cd19fee5dc934676006b2dc34b1ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/65929 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-17soc/amd: Fix some white spaces issuesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ibe20d48bdd8c776f9658620a13814f96e564dabc Reviewed-on: https://review.coreboot.org/c/coreboot/+/65907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-17soc/amd/common: Fix some white spaces issuesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I54438978db13ba00188e53239f7034d1b258e912 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-17soc/amd/*/include/soc/iomap.h: Fix some white spaces issuesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I7b6e41fa3b7cd8c8f7327c690212ec4990e8baf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-16soc/amd/[cezanne,picasso,sabrina]/Kconfig: Add PSP_APOB_DRAM_SIZE config optionFred Reitberger
The APOB in sabrina is larger than in cezanne/picasso and no longer fits in the previously allocated 64K space for it. Other symbols are placed immediately after the APOB region and end up corrupting the APOB data on sabrina. Add a Kconfig option to specify the APOB size in DRAM to reserve enough memory and increase the size for sabrina to 128K TEST=Timeless builds are identical for mandolin/majolica for PCO/CZN. Build chausie and verify symbols do not overlap _apob region BUG=b:224056176 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ia5dbacae67ff02fc8a6ec84b9007110ca254daa3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-16soc/amd/picasso: Add MP2 I2C0 and I2C1 controller ACPI devicesRitul Guru
This change is to allow AMD MP2 I2C OS driver to access I2C0/1 devices when MP2 firmware is loaded. Change-Id: Iaf25eb4dcf949e4b512ec0e86dbe5ccbc91c3d24 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65673 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-15soc/intel/xeon_sp: Make gsi_bases platform independentChristian Walter
This commit makes gsi_bases platform independent. It introduces two new Kconfigs which set if there are IIO APICs on other devices than the PCH or not, and where they do start. Change-Id: I40db4a8fd90572757687f35bbd8eebd7229fc75a Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65531 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-15soc/intel/cannonlake: Update VR config for Coffee LakeChristian Walter
This is based on the following Intel documents: * 570805 * 570806 * 572062 * 571264 Change-Id: I199415902d26fa5341ef3212a9169836ea4df74a Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 04:51:06 +0000