summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-11-20soc/intel/tigerlake: Enable RTD3 driver and IPC mailboxDuncan Laurie
This SOC overrides the common PMC device and instantiates the PMC device in the SSDT. It needs to call the common PMC function to provide the IPC mailbox method. The common PCIe RTD3 driver can also be enabled which will allow mainboards to enable Runtime D3 power control for PCIe devices. BUG=b:160996445 TEST=boot on volteer with this driver enabled for the NVMe device in the devicetree and disassemble the SSDT to ensure the RTD3 code is present. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ifa54ec3b8cebcc2752916cc4f8616fcb6fd2fecc Reviewed-on: https://review.coreboot.org/c/coreboot/+/46261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-20soc/intel/common: Add PCIe Runtime D3 driver for ACPIDuncan Laurie
This driver is for devices attached to a PCIe root port that support Runtime D3. It creates the necessary PowerResource in the root port to provide _ON/_OFF methods for which will turn off power and clocks to the device when it is in the D3cold state. The mainboard declares the driver in devicetree and provides the GPIOs that control power/reset for the device attached to the root port and the SRCCLK pin used for the PMC IPC mailbox to enable/disable the clock. An additional device property is created for storage devices if it matches the PCI storage class which is used to indicate that the storage device should use D3 for power savings. BUG=b:160996445 TEST=boot on volteer device with this driver enabled in the devicetree and disassemble the SSDT to ensure this code exists. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I13e59c996b4f5e4c2657694bda9fad869b64ffde Reviewed-on: https://review.coreboot.org/c/coreboot/+/46260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPDMichael Niewöhner
Replace the two obsolete LPID implementations with the new PEPD device. The PEPD device gets included in the plaforms' `southbridge.asl`, since it is required to load the `intel_pmc_core` module in Linux, which checks for the _HID. (See CB:46469 for more info on that.) There is no harm for mainboards not supporting S0ix, because the _DSM function won't be called with the LPS0 UUID on such boards. Such boards can use the debugging functionality of `intel_pmc_core`, too. Change-Id: Ic8427db33286451618b50ca429d41b604dbb08a5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46471 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/acpi: add _HID to PEPDMichael Niewöhner
Add the _HID INT33A1 to PEPD to make Linux recognize it as "Intel Power Engine" in the pmc core driver. The _ADR gets dropped, because _HID and _ADR are mutually exclusive. Change-Id: I7a0335681f1601f7fd8a9245a3dea72ffd100b55 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46469 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/acpi: correct return value for PEPD enum functionMichael Niewöhner
The PEPD enum function returns a bitmask to announce supported/enabled PEPD functions. Add a comment describing this bitmask and correct the return value to announce function 1, 5 and 6 as supported. Also add comments to the disabled functions 3 and 4. Change-Id: Ib523a54f5ad695e79005aba422282e03f2bc4bed Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi: work around Windows crash on S0ix-enabled boardsMichael Niewöhner
Windows does not comply with the Low Power Idle S0 specification and crashes with an `INTERNAL_POWER_ERROR` bluescreen when function 1, does not return at least one device constraint, even when function 1 is announced as being not available by the enum function. Returning an empty package does not work. At least the following Windows versions were verified to be affected: - Windows 8.1 x64, release 6.3.9600 - Windoes 10 x64, version 1809, build 17763.379 - Windows 10 x64, version 1903, build 18362.53 - Windows 10 x64, version 2004, build 19041.508 - Windows 10 x64, version 20H2 / 2009, build 19042.450 To make Windows work on S0ix-enabled boards, return a dummy constraint package with a disabled dummy device. Since the device constraints are only used for debugging low power states in Linux and probably also in Windows, there shouldn't be any negative effect to S0ix. Real device constraint entries could be added at a later point, if needed. Note: to fully prevent the BSOD mentioned above the LPIT table is required on Windows, too. The patch for this is WIP, see CB:32350. If you want to test this, you need to applie the whole ACPI patch series including the hacky LPIT test implementation from CB:47242: https://review.coreboot.org/q/topic:%22low_power_idle_fix%22 Test: no bluescreen anymore on Clevo L140CU on all Windows versions listed above and S0ix gets detected in `powercfg -a`. Change-Id: Icd08cbcb1dfcb8cbb23f4f4c902bf8c367c8e3ac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi: drop return value for disabled PEPD function 2Michael Niewöhner
PEPD function 2 is currently unused and disabled. Thus, drop the return value, which matches the default return value. Change-Id: Ia95b8b36fcb78e8976b66de15ec214a38c178cda Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi: rename PEPD/LPI macros for clarificationMichael Niewöhner
`ARG2` in the macro's names does not really provide any useful information. Drop it and add `LPI` to clarify the relation to only low-power idle states. Change-Id: I8d44c9e4974c7f34aa5c32ba00328725f536fda6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47247 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: rename LPID to PEPDMichael Niewöhner
Rename LPID to PEPD for consistency. PEPD means "Power Engine Plug-In Device" and is the name Intel and vendors usually use, so let's comply. Change-Id: I1caa009a3946b1c55da8afbae058cafe98940c6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46470 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: move S0ix UUID to the conditionMichael Niewöhner
Move the UUID to the condition, since there is no need to assign a name when it is only used once. Also add a comment to make clear that the functions inside that condition are only used by the Low Power Idle S0 functionality, while the PEPD in general can be present on boards without S0ix capability, too. For details check CB:46469. Change-Id: Ic62c37090ad1b747f9d7d204363cc58f96ef67ef Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46468 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: drop the southridge scope around PEPDMichael Niewöhner
PEPD will get included directly in the southbridge. Thus, drop the scope around it. Change-Id: Icb7a40e476966a7aca36bee055ee71d181508b87 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47246 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19include/device/pci_ids: add model number to ATI GPU and HDA controllerFelix Held
Change-Id: I215058bcb0d53bfec974b8d3721cb4c998fcbee5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47702 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/amd: rename common Kconfig and use wildcard for SoC-specific KconfigFelix Held
By renaming the AMD SOC common Kconfig file the wildcard to source all AMD SoC-specific Kconfig files won't match to it and it can be sourced after all SoC-specific Kconfig files in the sub-directories are sourced. This change allows adding new SoCs without having to edit the soc/amd Kconfig file. Change-Id: Iaaa5aad23eb6364d46b279101f3969db9f182607 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-18include/device/pci_ids: add model number to PCIe port and bus devicesFelix Held
Different models within family 17h have different PCI IDs for their PCIe GPP port and internal bus devices. Change-Id: I386df908ce5451b4484be2a2e4a9018c3d47d030 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-18include/device/pci_ids: add model number to data fabric devicesFelix Held
Different models within family 17h have different PCI IDs for their data fabric PCI devices. Change-Id: I44f8d32c950710e962dc519495b08c92f357ed20 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-18include/device/pci_ids: use the right device ID for AMD Picasso GPUFelix Held
The code that uses the GPU device ID uses the correct ATI vendor ID, but the description wrongly used AMD as vendor. In the AMD APUs the GPU PCI device and the corresponding audio controller use the ATI PCI vendor ID while all other PCI devices in the SoC use the AMD PCI vendor ID. Also move the two entries in a separate section right below the one they were in. Change-Id: Ia0b5bd4638f5b07c487f223321872563b36337e9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-18soc/amd/common: remove SOC_AMD_COMMON_BLOCK Kconfig symbolFelix Held
SOC_AMD_COMMON needs to be selected to be able to select SOC_AMD_COMMON_BLOCK which only includes the Kconfig files from the function block sub-folder. Removing SOC_AMD_COMMON_BLOCK and the corresponding Kconfig file and make SOC_AMD_COMMON include all Kconfig files from the sub-folders simplifies this a bit. Change-Id: I9068d57a80bdc144e73d2b8c00e7b2cae730d4b6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-18mb/google/asurada: Implement enable_regulator and regulator_is_enabledYidi Lin
SD Card driver needs to access two regulators - MT6360_LDO5 and MT6360_LDO3. These two regulators are disabled by default. Two APIs are implemented: - mainboard_enable_regulator: Configure the regulator as enabled/disabled. - mainboard_regulator_is_enabled: Query if the regulator is enabled. BUG=b:168863056,b:147789962 BRANCH=none TEST=emerge-asurada coreboot Change-Id: I391f908fcb33ffdcccc53063644482eabc863ac4 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46687 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18mb/google/asurada: Implement board-specific regulator controlsYidi Lin
Currently, five regulator controls are implemented for DRAM calibration and DVFS feature. The regulators for VCORE and VM18 are controlled by MT6359. The reguatlors for VDD1, VDD2 and VMDDR are controlled by MT6360 via EC. BUG=b:147789962 BRANCH=none TEST=verified with DRAM driver Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id06a8196ca4badc51b06759afb07b5664278d13b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-11-18soc/mediatek/mt8192: add pmic MT6315 driverHsin-Hsiung Wang
MT6315 is a buck converter for Mediatek MT8192 platform. Reference datasheet: MT6315 datasheet v1.4.2.pdf, RH-D-2019-0616. BUG=b:155253454 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: I6b47473ee5d56a197bd21d4ab9b539d9663b6636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45400 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18soc/mediatek/mt8192: add pmic MT6359P driverHsin-Hsiung Wang
MT6359P is a PMIC chipset for Mediatek MT8192 platform. Reference datasheet: MT6359_PMIC_Data_Sheet_V1.5.docx, RH-D-2018-0205. BUG=b:155253454 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: I62f69490165539847b8b7260942644533b15285b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45399 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18soc/mediatek/mt8192: add pmif driverHsin-Hsiung Wang
MT8192 uses power management interface (PMIF) to access pmics by spmi and spi, so we add pmif driver to control pmics. BUG=b:155253454 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: I32fc28f72d9522133baa06f9d67c383f814d862c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45398 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18soc/intel/common: Move CSE RW into new FMAP region to optimize boot timeSridhar Siricilla
CSE RW blob which will be used by coreboot to update CSE's RW partition, is packed part of FW_MAIN_A and FW_MAIN_B. This will increase the size of FW_MAIN_A and FW_MAIN_B. So, accordingly load and hash calculation of FW_MAIN_A (or FW_MAIN_B) increases during verstage. It increases the boot time by around 300ms. The patch address the boot time by pulling CSE RW blob outside of FW_MAIN_A and FW_MAIN_B. So, it creates new FMAP region within RW_SECTION_A and RW_SECTION_B and adds CSE RW blob in the new regions (ME_RW_A and ME_RW_B) as a CBFS file. Boot Time Measurement details when CSE RW blob is added in the ME_RW_A and ME_RW_B. -------------------------------------------------------- | Platform | Old Boot Time | New Boot Time | -------------------------------------------------------- | JSL | 1.3s | 1.06s | -------------------------------------------------------- | TGL | 1.63s | 1.36s | -------------------------------------------------------- Changes: 1. Makefile change to accommodate CSE RW blob into ME_RW_A/ME_RW_B 2. Kconfig change to define CBFS name and default file name for RW blob metadata. 3. CSE Lite Driver BUG=b:169077783 TEST=Verified on JSL & TGL platforms Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If043c9cb99fb822b62633591bf9c5bd75dfe8349 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Generate the CSE RW metadata and add to FW_MAIN_A/BV Sowmya
In the existing implementation CSE RW metadata file is generated by scripts and to avoid incompitable issues between coreboot and the scripts this patch adds the follwing changes, * Move the metadata generation to the coreboot Makefile. * Add CBFS component type struct to create a metadata file during the compile time. * Extract the CSE RW version from SOC_INTEL_CSE_RW_VERSION config and update the major, minor, hotfix and build versions using the compile time flags. * Compute the hash of CSE RW binary in hex format using the openssl and use the HASH_BYTEARRAY macro to convert the 64 character hex values into the array. * Add the me_rw.metadata cbfs file to FW_MAIN_A and FW_MAIN_B regions. BUG=b:169077783 TEST= Built for dedede. Verify that metadata file was generated and added to the FW_MAIN_A/B. Extracted it using cbfstool and verfied that metadata was generated properly. Change-Id: I412581400a9606fa17cf4398faffda923f07b320 Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Add Kconfig to enable the CSE FW Update featureV Sowmya
Add the Kconfig to enable the CSE FW Update feature and also to ensure all the configs are set by the mainboards to enable this feature. This config by default disables the CSE FW update feature for JSL and TGL platforms. It will be enabled after splitting and including the CSE RW and CSE RW metadata blobs in the CBFS. BUG=b:169077783 Change-Id: I12810031224f79aba8a4057725ae0ed5a9b36d7e Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Add Kconfig for CSE RW firmware versionV Sowmya
This patch adds a kconfig SOC_INTEL_CSE_RW_VERSION to pass the CSE RW firmware version from the mainboard. This will be extracted by makefile to update the cse_rw_metadata structure. Right now the required tool to extract the CSE RW version from the blob is still under development and after the official version of the tool is released, version will be extracted by parsing the CSE RW blob. BUG=b:169077783 Cq-Depend: chrome-internal:3402224, chrome-internal:3397863, chromium:2473603, chromium:2473603, chromium:2535950 Change-Id: I62691ee3ede7d4cd21f821381f5d1519f9061fd9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47430 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17soc/intel/xeon_sp: Fix SKX SATA drive boot issueMarc Jones
SKX FSP doesn't support X2APIC setup, but CPX does. The CPX DMAR table needs the X2APIC opt out flag set. This fixes the hang loading a kexec'd kernel. The change is easy to see in the coreboot output: [DMA Remapping table] Flags: 0x3 or in the DMAR ACPI table. Change-Id: Iec977c893b70e30875d9a92f24af009c1e90389e Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"Die()" needs <console/console.h>. Change-Id: I250988d77b0b0a093a1d116bea44a0cbb84189dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"printk()" needs <console/console.h>. Change-Id: Iac6b7000bcd8b1335fa3a0ba462a63aed2dc85b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-17soc/amd/picasso: Drop the inclusion of entry16.ld and reset16.ldFurquan Shaikh
This change drops the inclusion of entry16.ld and reset16.ld and instead adds the content of those files directly in memlayout_x86.ld in amd/picasso. This is done to allow the work for top-aligning bootblock to happen independent of Picasso layout. Once that is complete, Picasso layout can be re-evaluated to see if it can make use of the common bootblock linker file includes. TEST=Verified that coreboot.rom generated using --timeless is the same with and without this change for trembyle. Change-Id: Ib1218b24a06d0f69b856fb21458a6183fd21fcbc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-16soc/amd/picasso/acpi.h: include missing header filesFelix Held
In the file uintptr_t that is defined in stdint.h and struct device that is defined in device/device.h are used, so include them directly to avoid having to rely on them being included in the file that includes this header file. Change-Id: I9893619924d45e5690a5cfc65252ace4cb7f1486 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-16src: Update some incorrect config options in commentsMartin Roth
This is a trivial patch to fix some comments that were generating notes in the kconfig lint test. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I26a95f17e82910f50c62215be5c29780fe98e29a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47366 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/intel/denverton_ns: Generate ACPI DMAR TableJulien Viard de Galbert
- Write ACPI DMAR Table if VT-d is enabled. - The entries are defined to follow FSP settings. Change-Id: I263b03b96280599266d4c5e193583ecdfe9697b7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25446 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/intel/xeon_sp: Synchronize DMAR and MADT IOAPIC id'sArthur Heymans
Add a soc specific callback for getting the IIO IOAPIC enumeration ID. Tested on ocp/deltalake. Change-Id: Id504c2159066e6cddd01d30649921447bef17b12 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-16soc/intel/broadwell/systemagent.c: Rename to `northbridge.c`Angel Pons
Change-Id: Id1a0e02174456bb25df0721cfd3865645641a01a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-16soc/mediatek/mt8192: Reserve 44K SRAM for MCUPM working bufferYidi Lin
Reduce PRERAM_CBMEM_CONSOLE buffer from 63K to 19K and reserve 0x00115000 ~ 0x0011ffff for MCUPM. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ic82a194736eecd7bdc8df80b493290090a2ccba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-11-16src: Change bare 'unsigned' to 'unsigned int'Martin Roth
This fixes all of the current code in coreboot/src where a bare unsigned is used incorrectly. A follow-on will fix the comments so that we can enable the unsigned lint checker for src/coreboot. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I37f34a95bb1894e70cd9e076d4b81ebac665eaeb Reviewed-on: https://review.coreboot.org/c/coreboot/+/47482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-16lp4x: Add new memory parts and generate SPDsDavid Wu
This change adds the following memory parts to LP4x global list of available LP4x parts and to the global JSON file containing LP4x parts and their characteristics. 1. H9HCNNNCRMBLPR-NEE 2. H9HCNNNFBMBLPR-NEE 3. MT53D1G64D4NW-046 WT:A BUG=b:172751925,b:172781673,b:172782100,b:172781562 TEST=cd <path_to_coreboot_src>/util/spd_tools/lp4x && ./gen_spd <path_to_coreboot_src>/src/soc/intel/tigerlake/spd \ global_lp4x_mem_parts.json.txt "TGL" Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I37702770f707fe078920694468552c5db59c478f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47350 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/amd/common/block: drop double underscores from include guardsFelix Held
Since coreboot is written in C and not C++, having the double underscores as a prefix is not an issue, but it also doesn't add much information, so drop them and the trailing ones as well. Change-Id: I1028fb9097efab8ffae5ffa9fe85a97feebc78a9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47583 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/amd/stoneyridge: unify and align include guards with picassoFelix Held
Change-Id: I0cc06e33ed5c9b9bd97ed1f10f9c2d8019b1b5ac Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47582 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/amd/picasso/include: unify include guardsFelix Held
Change-Id: I980cdd03d4283cd4bd9db8bd90fde9a43bebc1e5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-11-16soc/amd/picasso/include/amd_pci_int_defs: remove duplicate commentFelix Held
This also reduces the difference to the equivalent file from stoneyridge. Change-Id: I3fc44f057047995cc4054a85a1bb69427aa28531 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47581 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-15soc/amd/common: factor out SMU code from PicassoFelix Held
The SMU mailbox access code from Picasso can be reused in the next generation, so factor out the code to soc/amd/common/block/smu. Since the mailbox register offsets in the indirect address space, the number of arguments and the message IDs don't always match between different devices, keep those in the soc-specific directories. Change-Id: Ibaf5b91ab35428e4c771e7163c6e0c4fc50371e7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-14soc/intel/cnl: enable ACPI CPPC entries generationMichael Niewöhner
Enable CPPC entries generation, needed for Intel SpeedShift. Test: dumped SSDT from Clevo L140CU and checked decompiled version Change-Id: I0c8066a31d3bec27776836aac54c335c0e5d74e6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47541 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/common/block: add code for ACPI CPPC entries generationMichael Niewöhner
Copy the code for CPPC entries generation, needed for Intel SpeedShift, from SKL to common ACPI code. SKL is going to use common ACPI code, too, in the future, so this code duplication will vanish soon. Test: dumped SSDT from Clevo L140CU and checked decompiled version after enabling CPPC entries via Kconfig Change-Id: I1fcc2d0d7c6b6f35f8dd011f55dab8469be99d47 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45535 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/xeon_sp: Improve generating PCH IOAPIC MADT entryArthur Heymans
The PCH IOAPIC ID is 0x8 so it needs to be generated before the IIO IOAPICs. Since we will get rid of the ioapic_id array this makes it more readable. Change-Id: I64a3b259e438ef666fb68a433cceda10aebdb1bf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
The option `HeciEnabled` was partly replaced by use of the device on/off state in the devicetree in commit 3de90d1. The option has been removed from the corresponding boards, so `HeciEnabled` is always 0 and ME always gets disabled during soc finalize, when `HECI_DISABLE_USING_SMM` is set. Replace the option in the finalize function by the same dt state check that sets the FSP option and drop the remaints of `HeciEnabled`. Devicetrees still having `HeciEnabled` have been adapted to keep the current behaviour. Change-Id: Ib4cca9099b9aa3434552a41fbafca7cf6a0dd0eb Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47195 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/tigerlake: Add code for early tcssBrandon Breitenstein
In order for USB Type-C idisplays to be detected prior to loading Kernel PMC IPC driver is needed to communicate with PMC in order to correctly set the USB Mux settings. This patch is adding in support for early detection of both Displays. BUG=b:151731851 BRANCH=NONE TEST=built and verified that TCSS MUX is being set on Volteer Change-Id: I58e66f21210d565fb8145d140d2fc7febecdd21a Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42079 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/xeon_sp/acpi.c Loop over HOB stack for MADT generationArthur Heymans
To align MADT generation with DMAR, we loop over HOB entries instead of over copied HOB entries fetched from get_iio_stacks(). This makes it easier to see what is going on. Tested on ocp/deltalake Change-Id: I8ffe0322bb182b7ec5887354ec801e1f9f3d3288 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13soc/intel/xeon_sp: move get_iiostack_info() to a common placeArthur Heymans
All this function does is looping over IIO stacks in the FSP HOB. The only 'SOC/FSP specific' thing is the way to detect if the stack is an IIO stack so add a callback to determine this. Change-Id: I4fa9c54d50279213a4174186a23c3cc156e21c9a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13soc/intel/xeon_sp: Change the return type of get_iio_stack_info()Arthur Heymans
The somewhat unrelated return value makes the function harder to understand and the return type is not consistently used. Use a different helper function to get the HOB Pci64BitResourceAllocation data. Change-Id: I9a03cbb0ebbb48cc052d4c082d359c0087aaeb3e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13soc/intel/common/block/acpi: add Kconfig for CPPC entries generationMichael Niewöhner
Change-Id: Ieae9f221ffb27cf52cab21a130e18aa3929caea3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47540 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: drop duplicate PM ACPI timer disablingMichael Niewöhner
FSP already disables the PM ACPI timer, when EnableTcoTimer=0. Test: clevo/l140cu and supermicro/x11ssm-f have the PM ACPI timer disable bit set when EnableTcoTimer=0. Change-Id: If370d3acf87ae6d1d7c64bf27228877cdd92ab2d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-13soc/intel/common: add Kconfig to enable/disable the ACPI PM timerMichael Niewöhner
Currently, the ACPI PM timer state gets set in devicetree by the option PmTimerDisabled. However, it is not board design dependent. Thus, add a user-selectable Kconfig option. Disabling the PM ACPI Timer is only valid when PM Timer emulation is supported and is only possible, when there is a hardware PM Timer (APL does not have one for example). SoCs, where the hardware PM Timer can be disabled must select `PM_ACPI_TIMER_OPTIONAL`. This new Kconfig gets used in the follow-up commits of this series. Change-Id: I7f607f277eb14f84a7370ffb25a13226e7ccc917 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-13soc/amd: factor out _SOC_DEV macro into common blockFelix Held
TEST=Timeless build doesn't change for Mandolin and Gardenia. Change-Id: I1aef68459569536207697bfca407145a7b5334f4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-13soc/amd/common/block/include: make include guards more uniformFelix Held
TEST=Timeless build doesn't change for Mandolin and Gardenia. Change-Id: I5d3ae1459c333658f4c86388f1822d92ca13c658 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-13soc/intel/broadwell: Split up acpi.cAngel Pons
Change-Id: Ie9c57b6f5c226cee8797027941fa03e69de52923 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46796 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Flatten northbridge folder structureAngel Pons
Having folders for bootblock and romstage is no longer necessary. Change-Id: I7d1f4063de6a1a1ff9ee7478e94f889a50102054 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46795 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Relocate CPU filesAngel Pons
Change-Id: Ib2ddce78db21db9c8deac632a77ecd71eb9887c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46794 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Flatten `acpi_init_gnvs` functionAngel Pons
Instead of relying on mainboards to call it, do like Lynx Point. Change-Id: Idb7457e0734e19d0a26f0762079e273b6e740475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46793 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Factor out `acpi_fill_madt` functionAngel Pons
It is identical for all Broadwell mainboards, thus deduplicate it. Change-Id: I74559fbe42e44aa4d15ced5d88f6c15a1bf5203b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46792 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/acpi: Rename `systemagent.asl`Angel Pons
Rename it to `hostbridge.asl`, which is what Haswell uses. Change-Id: I6f97fc5c9459fe6b66dcfcf51900c751beda0ebe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/pch/acpi/hda.asl: Rename to `audio.asl`Angel Pons
This is merely to ease diffing Lynx Point and Broadwell ASL code. Tested with BUILD_TIMELESS=1, Google Buddy does not change. Change-Id: I9f6ab98388d2a2915a48377ebe9e724cfee4b95f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46779 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/pch/acpi: Clean up cosmeticsAngel Pons
Use ASL 2.0 syntax where possible and uniformize code style to match the IASL disassembly. Some `Store` in gpio.asl change the binary if touched. Tested with BUILD_TIMELESS=1, Google Buddy does not change. Change-Id: Ic13c081fd7ee2212d851cc14263c1e2fd8970072 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46778 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/xeon_sp: Tidy up adding MADT ioapic entriesArthur Heymans
Add a helper function to print out debug info and add the MADT entry. Change-Id: I1a00f87c6edef530c5352929ee9279782be4b112 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-12soc/intel/xeon_sp: Use a common function to get the IIO HOBArthur Heymans
TESTED ocp/deltalake still boots. Change-Id: I69f336c1ff348b8e820340b84494929f2c58ce72 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47296 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12soc/intel/alderlake: Add PCH ID 0x5181Subrata Banik
List of changes: 1. Add new PCH ID 0x5181 into device/pci_ids.h 2. Update new PCH ID into common lpc.c 3. Add new PCH ID description into report_platform.c TEST=Able to build and boot ADLRVP with new PCH ID. Change-Id: I4343b7343876eb40c2955f6f4dd99d6446852dc0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12Delete soc/qualcomm/sdm845Julius Werner
Work on this SoC was abandoned and never finished. It's not really usable in its current state, so let's get rid of it. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I23453e3e47ac336ab61687004470e5e79172cafe Reviewed-on: https://review.coreboot.org/c/coreboot/+/47428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-11mb/google/volteer: Configure IA32_L3_MASK_x MSRs for L3 CQOSShreesh Chhabbi
Selecting USE_CAR_NEM_ENHANCED_V1 as of now. This selection in Kconfig programs IA32_L3_MASK_1 (0xc91) & IA32_L3_MASK_2 (0xc92). These will select ways for eviction & non-eviction. TGL will have to switch back to USE_CAR_NEM_ENHANCED_V2 once the IA32_L3_SF_MASK_1 (0x1891) & IA32_L3_SF_MASK_2 (0x1892) programming requirements are understood. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ifc77856e26ab26f9fbb2693f70c751f43337421b Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-11soc/intel/tigerlake: Update Kconfig for NEM Enhanced ModeShreesh Chhabbi
This change switches the selection of CAR mode so that INTEL_CAR_NEM_ENHANCED_V2 is the default unless mainboard selects INTEL_CAR_NEM. INTEL_CAR_NEM is selected only by mainboards using older silicon (ES1 or ES2) that did not support NEM enhanced mode. This enables NEM Enhanced Mode for TGL-U/Y RVPs. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ib6e041261cb8ca9c6e602935da4962aac0d9ece5 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-10soc/intel/tigerlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 BRANCH=volteer Change-Id: Ib3d0bf33d780444f8240f749a3319212c985950d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-10soc/intel/jasperlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 TEST=Build and boot to OS in Drawlat. Ensure that the wake up event is logged into the event log for one of the internal devices eg. USB bluetooth. 8 | 2020-11-05 15:04:16 | S0ix Enter 9 | 2020-11-05 15:04:29 | S0ix Exit 10 | 2020-11-05 15:04:29 | Wake Source | PME - XHCI (USB 2.0 port) | 8 11 | 2020-11-05 15:04:29 | Wake Source | GPE # | 109 12 | 2020-11-05 15:05:08 | S0ix Enter 13 | 2020-11-05 15:05:14 | S0ix Exit 14 | 2020-11-05 15:05:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8 15 | 2020-11-05 15:05:14 | Wake Source | GPE # | 109 Change-Id: I9f43675b698bf310f6b98b5e775d1259607abbcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47226 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/skylake: Enable PCH thermal depending on devicetreeBenjamin Doron
Hook up PCH thermal subsystem configuration to devicetree. Change-Id: I84bac2cec079370370ecf1e5e4742e6704921d40 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09soc/nvidia/tegra124/include/soc/clk_rst.h: Remove extra tabElyes HAOUAS
Change-Id: I0c606fd129c200446744f7a67ae63fec6d8e1684 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-09soc/intel/jasperlake: Enable Intel FIVR RFI settingsMaulik V Vaghela
We already have RFI UPD settings to mitigate RFI noise issues in platform. These UPDs were not getting filled via devicetree but needed to be filled from fsp_params.c Exporting these UPDs to chip.h will allow OEM/ODMs to fill it directly from devicetree and also allow us to control it based on boards instead of keeping it common across SoCs. BUG=b:171683785 BRANCH=None TEST=Compilation works and we're able to fill UPD from devicetree.Value gets reflected in FSP UPDs. Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/amd/*/smi.h: Move the pm_acpi_smi_cmd_port function declarationArthur Heymans
This prototype will be used outside of soc/amd. Change-Id: Icc69cf8a910764b27edf64f0f527b8f6a9013121 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45813 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/xeon_sp: Don't add memory resource twiceMarc Jones
The resource function is called for each device VID/DID. Only add the memory resource map from the boot CPU (bus 0) and not for each socket/CPU. This is a NUMA architecture and has a shared memory map. All the resources must match across the sockets/CPUs, so they should only be added to the map once. Change-Id: Ia336f604441ae8d30b8418300da7c34ab9907cae Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-09soc/intel/xeon_sp: Move set_bios_init_completion()Marc Jones
Move set_bios_init_completion() and helper functions from skx and cpx soc_util.c to xeon common util.c. There are some slight differences between skx and cpx, so used the more correct cpx functions. Both cpx and skx platforms boot as expected. Change-Id: Ie416b3a43ccdd14a0eb542786593c2eb4d37450f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47172 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/xeon_sp: Look up the IIO_HOB only onceArthur Heymans
The HOB does not move, place its location in .bss. Change-Id: I2c6dbe4d64138e45fa1dfe7580ffa70d0441bd88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47294 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/amd/common: add Kconfig help text to pre-family-17h-only blocksFelix Held
The cpu/car code only applies to pre-family-17h CPUs that still use cache as RAM (CAR) and the PI code only applies to the pre-FSP vendor code blob binaryPI interface. Change-Id: I5a13d7e202bb745255fabb46110850c36b07de7a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47274 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Correct GPIO pad sequence for community pad groupMaulik V Vaghela
In gpio.c file, we have community group array for each comm, representing gpio groups within that community. Like there might be group H,D, VGPIO and C within community 1. Community also may have some reserved gpio and we also define those in an array which indicates OS can't use those GPIO (through PAD_BASE_NONE) Now when we define reserved pads in the middle of actual community pads, it creates an issue while calculating an offset for GPIO host own pad register. This is because function actually checks current gpio index (lets say vgpio_39 in our case) and tries to get group index from an array which we have defined. If we have defined reserved gpios in between 2 communities, index calculated will also account for reserved GPIO and register offset calculation will move to next set of register (offset 0xC instead of offset 0x8). Because of this coreboot won't configure HOST_OWN_PAD register correctly and driver will not be able to get non-SMI interrupts for related gpio. Align pad group as per EDS and pin-ctrl driver in linux kernel. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=VGPIO community index is correctly calculated. Drawlat board boots fine with this change and warm reset also works. Change-Id: Id6013914c88c50f4b8c60ca9a9285a8e1b214d11 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/jasperlake: Update reserved GPIO names in gpio_soc_defs.hMaulik V Vaghela
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting this GPIOs with proper name to align with EDS volume 2 Also removing unused GPIOs at the end of community 4 (group E). Since those reserved GPIOs are at the end of the community, it won't affect the offset calculations within community. This change will also help us aligning pad numbering with kernel pin-ctrl drivers too. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=Platform boots fine and basic functionality such as SD, Wifi works. Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Change-Id: Icdb10043700c20ddb6ae93747a731005fd233a70 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/tigerlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icebcac3b69c605ecf6df37733b641397ea3c3ad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/common/acpi: create pep.asl from lpit.aslMichael Niewöhner
Copy lpit.asl to pep.asl to have a clean patch series without moving files and to be able to keep the replace-patch CB:46471 as small as possible to avoid confusion. Change-Id: Ib1c019039ef0c518cf678af6109ba914b7f47bb6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09intel/common/pmc: Add functions for IPC mailbox in ACPIDuncan Laurie
This change adds two functions that provide an IPC mailbox method via ACPI for runtime clock configuration. pmc_acpi_fill_ssdt_ipc_write_method() will provide a method in the SSDT that can be called by other ACPI devices to send an IPC mailbox command. This function is exported because some SOCs override the default PMC device and need to call this function to write the method into the SSDT. pmc_acpi_set_pci_clock() will call the method defined by the previous function to enable or disable the PCIe SRCCLK for a specified root port and clock pin. It can be called by the PCIe root port after turning off power to the attached device. BUG=b:160996445 TEST=boot on volteer device and disassemble the SSDT to ensure that this method exists. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I95f5a1ba2bc6905e0f8ce0e8b2342ad1287a23a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46259 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/tigerlake: Utilize vbt data size Kconfig optionSrinidhi N Kaushik
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed the size from 8 to 9 Kib in drivers/gma. This change makes use of Kconfig option to pick the size for tigerlake. BUG=b:171401992 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I21a0bba9ae01bac326f0f931641c98e8d308310f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
InternalGfx isn't used so drop it. Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09acpi: Call acpi_fill_ssdt() only for enabled devicesKarthikeyan Ramasubramanian
Individual drivers check whether the concerned device is enabled before filling in the SSDT. Move the check before calling acpi_fill_ssdt() and remove the check in the individual drivers. BUG=None TEST=util/abuild/abuild Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-09soc/intel/xeon_sp/skx: Reorder soc_util.cMarc Jones
Reorder soc_util.c and remove the un-needed #if ENV_RAMSTAGE to match cpx version in preparation for more de-duplication. Change-Id: Iab343e903e2478709fe91739c9ca77f587286df7 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-07soc/amd/common: Don't program GPIOs if the table isn't setMartin Roth
Currently, there's no check for the table being programmed. This skips programming a table if the table size is zero, or the pointer to the table has been set to NULL. BUG=None TEST=Set table pointer to NULL, table doesn't run. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7d09b47e7d619428b64cc0695f220fb64c71ef4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-07soc/amd/common/psp: expand CPU family names in Kconfig help textFelix Held
Expand fam17h to family 17h to make the help text slightly easier to understand and add family 19h to the description of SOC_AMD_COMMON_BLOCK_PSP_GEN2. Change-Id: I9284c9c638e1d217d4605523dde004781f4343f9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-07mb/intel: Enable ALC711 Audio codec over SNDW0 linkSridhar Siricilla
The patch enables ALC711 Audio codec. Test=Verified on ADL RVP. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73f480dad1047cebd7ffc66e0104ff10cacc300b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-06sc7180: Correct mmu configuration for AOP SRAM regionsT Michael Turney
NOC errors detected at runtime in AOP SRAM region strongly suggested speculative memory accesses were occurring in memory regions that either don't exist or are device memory rather than SRAM. Signed-off-by: T Michael Turney <mturney@codeaurora.org> Change-Id: I6611dc614c80063c7df057b59337417c8f56fd9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-06soc/amd/picasso: add Raven1 GPU PCI IDFelix Held
Change-Id: Id4460eb596b080dec1a63a20869182170c3388af Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso/cpu: add Raven1 CPUID to CPU tableFelix Held
The RV1 CPUID is already in the cpu.h file, but was still missing from the CPU table in cpu.c. Change-Id: Iad78cbe933b40e946d421e4c93e523f9e31f1089 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso: Set vboot hashing block size to 36kMartin Roth
On picasso's psp_verstage, the vboot hash is being calculated by hardware using relatively expensive system calls. By increasing the block size, we can save roughly 150ms of boot and S3 resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6642073357327811b415dcbcad6930ac6d2598f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/amd/picasso: Up stack size to 40k for vboot hash bufferMartin Roth
Increasing the vboot hash buffer size greatly speeds up the SHA calculations. Going from a standard 4k buffer to a 36k buffer takes ~150ms of the boot and resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibca868ad7be639c2a0ca1c4ba6d71123d8b83c92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46902 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 01:50:07 +0000