summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-12-15soc/mediatek/mt8192: Define DRAM registers and APIsHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: Ifc64fb6c60d57184c4a2f9febe765b5cb69b39ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/44699 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14src/soc/intel: Add support for CAR_HAS_SF_MASKS and select for TGLShreesh Chhabbi
Program IA32_CR_SF_QOS_MASK_x MSRs under CAR_HAS_SF_MASKS config option. Select CAR_HAS_SF_MASKS for Tigerlake. During CAR teardown code, MSRs IA32_L3_MASK_x & IA32_CR_SF_QOS_MASK_x are not being reset to default as per the doc NEM-Enhanced-Mode-Whitepaper-Tigerlake-draft-WW46.5. Resetting the value of IA32_PQR_ASSOC[32:33] to 00b is sufficient. Bug=b:171601324 BRANCH=volteer Test=Build and boot to ChromeOS on Delbin. Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Change-Id: Iabf7f387fb5887aca10158788599452c3f2df7e8 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-14soc/intel: Remove INTEL_CAR_NEM_ENHANCED_V2 config optionShreesh Chhabbi
SF Mask MSRs' Programming which was done under this config selection will be moved under a new config option called CAR_HAS_SF_MASKS. This segregates the eNEM programming sequence based on sub features supported in each processor. Bug=b:171601324 BRANCH=volteer Test=Build volteer build and boot on Delbin EVT. Change-Id: If4d8d1ec52b7b79965fe1a957c48f571ec56dc63 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/tigerlake: Enable CSE Lite driver for TGL platform in romstageSridhar Siricilla
This patch sets up cse_fw_sync() call in the romstage. The cse_fw_sync() must be called after DRAM initialization. BUG=b:174694480 Test=Verified on Tigerlake platform Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ib485a4d1d15989b162105deb32bb317d7a0f2856 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48281 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/jasperlake: Enables CSE Lite driver for JSL platform in the romstageSridhar Siricilla
This patch sets up cse_fw_sync() call in the romstage.The cse_fw_sync() must be called after DRAM initialization. BUG=b:174694480 Test=Verified on Drawlet Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I43030e77f6ede53c23e6c9e65d34db85c141e13a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48280 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/common: Move CSE Lite driver functionality into romstageSridhar Siricilla
The patch sets up the CSE Lite driver in the romstage instead of ramstage. With this change, CSE Lite driver sets CSE's boot partition and triggers CSE FW update in the romstage. The cse_fw_sync() must be called after DRAM initialization as HMRFPO_ENABLE HECI command (which is used by cse_fw_sync()) is expected to be executed after DRAM initialization. With this change, it improves the cold boot time by ~154ms. Test=Verified on JSL and TGL platforms BUG=b:174694480 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2fd562a5c6c8501226abbcb68021d9356bcf0b73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48279 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/inte/common: Replace #if macro with if C-language constuctSridhar Siricilla
This patch modifies CSE Lite driver to use 'if' C-lanugage construct instead of #if macro and adds 'if SOC_INTEL_CSE_RW_UPDATE' to the prompts of CSE Update related KConfigs to prevent appearing them in the menu. TEST=Built the code for drawcia Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Iecd5cf56ecd280de920f479e174762fe6b4164b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/common: Check sizes of CSE CBFS RW blob and CSE RW BPSridhar Siricilla
The patch triggeres CrOS recovery mode if the sizes of CSE CBFS RW blob and CSE RW boot are different. TEST=Verified on drawcia. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I8be589eae905b1a54a8cf981ccd3a00bd5e733f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48423 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/braswell: Use Kconfig value for TSEG sizeAngel Pons
SoC selects HAVE_SMI_HANDLER, so TsegSize is always set to 8 MiB. Also, use SMM_TSEG_SIZE in place of a magic number. Change-Id: I139e1073426051fea5d30b6ce3dd9746e0e985a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/braswell: Clean up devicetree settingsAngel Pons
Remove unreferenced settings and factor out common settings. Many of these are not mainboard-specific, and all boards use the same value. Change-Id: Iecae61994a068e8022638a2ad9ca10174427f0a4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop always-zero ProbelessTrace dt settingAngel Pons
This seems to be a debugging option. Since unset devicetree options default to zero, drop the setting. If it is needed in the future, a user-visible Kconfig option would probably make more sense. Change-Id: I0a71bc407fa92da3dcc0e3dbd666438d4280ffcb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop always-zero PowerLimit4 dt settingAngel Pons
Unset devicetree settings default to zero, so the devicetree setting can be removed. Looks like no one needs it anyway. Change-Id: Iad94538c5465347b37a99c6c9f20988168661593 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop never-set DdrFreqLimit dt settingAngel Pons
Only Google Eve uses a non-zero value, but it overwrites in C code. Drop the devicetree setting, since no mainboard uses it. Change-Id: I14e0e0cb9baa2b1f8f795e6bc6ffbee300f2243d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/xeon_sp/skx: Hook up microcode blobArthur Heymans
TESTED on ocp/tiagopass: Microcode updates are properly applied (via FIT). Tested with out of tree patches to report the revision. Change-Id: I05ddc64090424aa333848d9a0f54f21538faf94c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14soc/intel/skylake: Drop unreferenced PttSwitch dt settingAngel Pons
The value for this setting is not used anywhere. Drop it. Change-Id: I75f6cdec6c69b374a07519bf9058b8f6e4916307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I76aa2327d440394a9176c023bc95fb34e713741e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48571 Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/xeon_sp: Configure DPR on all stacksArthur Heymans
Configure DPR to span the region between cbmem_top and TSEG base. This region was already unavailable to the OS. Change-Id: Ia0d34e50b3d577f19172619156352534f740ea6b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14drivers: Replace multiple fill_lb_framebuffer with single instancePatrick Rudolph
Currently it's not possible to add multiple graphics drivers into one coreboot image. This patch series will fix this issue by providing a single API that multiple graphics drivers can use. This is required for platforms that have two graphic cards, but different graphic drivers, like Intel+Aspeed on server platforms or Intel+Nvidia on consumer notebooks. The goal is to remove duplicated fill_fb_framebuffer(), the advertisment of multiple independent framebuffers in coreboot tables, and better runtime/build time graphic configuration options. Replace all duplications of fill_fb_framebuffer and provide a single one in edid_fill_fb.c. Should not change the current behaviour as still only one graphic driver can be active at time. Change-Id: Ife507f7e7beaf59854e533551b4b87ea6980c1f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/tigerlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I5f5da8dfcec7dd35981611830b555cab5d6af3e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48572 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/jasperlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I40eba4128f1c5bafc7023b28dbaf40c0aca3f490 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/icelake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I6ce43071c95eeb41c35ddfdb734db52d863ea8e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/elkhartlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ia928c4bbddd1c160228a9af8faf5d4be787f73f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/cannonlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ia9c8347cad479c6b4e678630921f768e0fdee6d9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/alderlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ib4cf88a482f840edf16e2ac42e6ab61eccfba0aa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14intel/common/block/lpc: Add new device IDs for Emmitsburg PCHJonathan Zhang
Add LPC/eSPI device ID of Emmitsburg (EMB) for setting LPC resources. Refer to Emmitsburg PCH EDS (606161). Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ie5a5d9ba7e4f664ada2dae2294d6e4d0280a2157 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14soc/intel/elkhartlake: Update IRQ routing settingsTan, Lean Sheng
Update IRQ routing settings. Extra reference: - ACPI spec 6.2.13 _PRT Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I53feeab81e82c539fa8e39bf90d3f662f75e6d53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-14soc/intel/elkhartlake: Update USB & PCIe devices in ASL filesTan, Lean Sheng
Update USB & PCIe devices in ASL files as per EHL EDS. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I8b567127fbdd880ccc0a5e0ca334162f9f4f5164 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-14soc/intel/elkhartlake: Update USB_PORT_MID pin settingsTan, Lean Sheng
Update Pre-emphasis, Transmitter Emphasis & Preemphasis Bias values for USB_PORT_MID. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I43eeb0fc410197a559df97b340135fac65c00aa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48541 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/elkhartlake: Update SerialIO devices detailsTan, Lean Sheng
Add I2C #6 & #7 and remove GSPI #3 as per EHL EDS. Also update device function number for GSPI #2 in asl file. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: If166fefe567a857ca29527d0367197139efbf6c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48540 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/elkhartlake: Update HECI Control Status Register settingsTan, Lean Sheng
For EHL, SpiProtectionMode is added to HFSTS register #1. The original Manufacturing Mode is detected via FpfSocConfigLock instead. If FpfSocConfigLock=1, means it is in Menufacturing Mode, and it is in EOM (End Of Manufacturing) when FpfSocConfigLock=0. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I9d1d004a6b5b276e33be80f02cd1197b88d379ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/48539 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/elkhartlake: Update PCI device definitionTan, Lean Sheng
This change updates PCI device definition according to EHL EDS. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Ibf7ef3c30deab5398361bc18fc63ac39fc914d8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48444 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/mediatek/mt8192: Add ddp driverYongqiang Niu
Add ddp (display controller) driver that supports overlay, read/write DMA, etc. The output goes to display interface DSI, DPI or DBI directly. BUG=b:155713214 BRANCH=none TEST=Boots correctly on asurada Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Change-Id: I1ad13175b8304beed9965d609ea3bd721311f154 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46577 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/mediatek/mt8192: Enable dsi driverHuijuan Xie
Enable dsi driver for display. BUG=b:155713214 BRANCH=none TEST=Boots correctly on asurada Signed-off-by: Huijuan Xie <huijuan.xie@mediatek.corp-partner.google.com> Change-Id: I067db08f5600aeee216f482fec49ab75f75a602a Reviewed-on: https://review.coreboot.org/c/coreboot/+/46574 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/mediatek/mt8183: Move dsi driver to common/Yidi Lin
The mt8183 dsi driver can be shared with mt819x SoC. Move dsi.c to common/ folder and rename it to dis_v2.c to differentiate it from mt8173's dsi driver. TEST=emerge-kukuki coreboot Change-Id: I722d3e67f230ab8eb729900cdf15b922eb91a072 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-14soc/mediatek/mt8192: add i2c driver supportQii Wang
Add I2C controller for MT8192, and revise the common I2C driver to support I2C controller running in APDMA async mode. In that case we have to initiate a different handshake protocol and reset I2C differently. BUG=b:155715435 TEST=Asurada boots up to shell Signed-off-by: Qii Wang <qii.wang@mediatek.com> Change-Id: I13835e00eb674a93aa5496a9870d1e601e263368 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-13soc/amd/*/include/spc/gpio: fix pin numbers in commentsFelix Held
Change-Id: I9e91f28659c49927aaa4c7cd67f73bb11258c27c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-13soc/amd/common/block/gpio: use all-y in MakefileFelix Held
Change-Id: Ib77e3d088cc07da4e43a63afb863bb90796f9a37 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-13soc/amd/cezanne: add caching setup in bootblockFelix Held
The code can likely be factored out to common code, but since I'm not entirely sure yet that there will be no differences, I'll copy for now instead. Change-Id: I5fc158518cf9534ab9727f3305abeb4b34049e76 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-12soc/amd/common: Remove SMBus host word accessorsKyösti Mälkki
SMBus controller has byte-wide registers. Remove the word accessors. Change-Id: If396108308bc8303d84458039b9529ecd83276c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-12soc/amd/common: Refactor ACPIMMIO posted writesKyösti Mälkki
Change-Id: Ic1a5c17c789dd79fea8f348d1a9d32d4301ced88 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42825 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-12Revert "src/amd/common: Exclude biosram from psp_verstage"Kyösti Mälkki
This reverts commit f38af663d2c2c854859715803da249e6c24032db. The build error was a spurious ENV_X86 guard in <cbmem.h> that called for a different clean up. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I0a995301404b67224be6addbeebf984c4b5c47d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43067 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11amdfwtool: Register APCB and APCB_BK respectivelyZheng Bao
We took the assumption the APCB(0x60) and APCB_BK(0x68) are the same file. For picasso, they are. For later programe, they are not. Change-Id: Idea7847691c2b511b489c306f04a8cb8945fd057 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-11soc/amd/picasso: Add data fabric read helper functionJason Glenesk
Add new helper function to support reading a register from the data fabric. BUG=b:155307433 TEST=Boot trembyle with If64fd624597b2ced014ba7f0332a6a48143c0e8c and confirm read values match expected values. BRANCH=Zork Change-Id: If0dc72063fbb99efaeea3fccef16cc1b5b8526f1 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47726 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/amd/cezanne: add 0xcf9 resetFelix Held
Change-Id: Ibb78661c102e0d0327f3e74173bf98bc40e13960 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48488 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/amd/picasso: move chipset_handle_reset to commonFelix Held
The FSP integration code needs this function to be present. It's not supposed to be called, but if it is, it'll print an error and call the SoC's cold reset function. Change-Id: I15f2622d9d9d0f22e3cf8e6283b578f5933b1a9f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-11soc/intel/common/block/acpi: Skip UART debug table if not usedMarc Jones
Skip the ACPI UART debug table if common block UART isn't selected. Change-Id: I8d627998ca450c32496c90e51aad48f332b40e23 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48247 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/intel/common/block/lpc: Move southbridge_write_acpi_tables declarationMarc Jones
Move the southbridge_write_acpi_tables declaration from acpi.h to common lpc_lib.h, as common LPC is always the caller. This removes a duplicate declaration since all soc/intel devices use common LPC, but not all use common ACPI. The southbridge_write_acpi_tables function is defined in acpi.c with the other acpi functions. Note that this would have the reverse problem if there is ever a non-common LPC device. Change-Id: I0590a028b11f34e423d8f0007e0653037b0849a0 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48251 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/amd/picasso: factor out write_resume_eip to common codeFelix Held
Change-Id: I24454aa9e2ccc98b2aceb6b189e072e6e50b8b30 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-11soc/amd/picasso: move UART console code to common folderFelix Held
Change-Id: Ibc9a4c05bdfc7cd3cd0eada67563386c95d2b50e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-11soc/amd/picasso: move UART Kconfig options to common folderFelix Held
The actual UART initialization code will be factored out in follow-up commits. Change-Id: Ie4ddf1951b230323c5480c4389376c62dd74b0e1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-11soc/amd/picasso: rename PICASSO_CONSOLE_UART to AMD_SOC_CONSOLE_UARTFelix Held
This allows factoring out the common initialization for the integrated UARTs. Change-Id: I7399a13b9280b732086c6f8e6dfd9f1207d8c8ff Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48508 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/amd/piasso,cezanne: add warning about using all-y in Makefile.incFelix Held
all-y will also add a compilation unit to the verstage on PSP build that runs on an ARM code instead of a x86 one. At the moment Cezanne doesn't have verstage on PSP support yet, but since it'll eventually land it doesn't hurt to already add the comment now. Change-Id: I15fb66e796cab48737ba5ac463c4c973794a005a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-11soc/amd/picasso: use all-y for aoac targetFelix Held
Since aoac gets also linked into verstage on PSP, all-y can be used here. Change-Id: I74607123ebc8115aa7efbb9a364d9632372b52cb Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48506 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/amd/picasso/aoac: only check FCH_AOAC_UART_FOR_CONSOLE if usedFelix Held
FCH_AOAC_UART_FOR_CONSOLE will only be used in the code if PICASSO_CONSOLE_UART is selected, so only check if it's a valid value in this case. Change-Id: I103dd8d469a084c7dc7dcf55175b1f77f900adc5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48485 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/intel/tigerlake: Check TBT & TCSS ports for wake eventsTim Wawrzynczak
Wakes from TBT ports and TCSS devices will show up as PME_B0_STS wakes, so add checks for wakes from these devices in pch_log_pme_internal_wake_source. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie9904c3c01ea85fcd83218fcfeaa4378b07c1463 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47396 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/intel/common: Adapt XHCI elog driver for reuseTim Wawrzynczak
Currently this XHCI driver assumes the PCH XHCI controller, but the TCSS or North XHCI block has a similar enough PCI MMIO structure to make this code mostly reusable. 1) Rename everything to drop the `pch_` prefix 2) xhci_update_wake_event() now takes in a pci_devfn_t for the XHCI controller 3) soc_get_xhci_usb_info() also now takes a pci_devfn_t for the XHCI controller BUG=b:172279037 TEST=plug in USB keyboard while in S0, enter S0ix and verify entry via EC; type on keyboard, verify it wakes up, eventlog contains: 39 | 2020-12-10 09:40:21 | S0ix Enter 40 | 2020-12-10 09:40:42 | S0ix Exit 41 | 2020-12-10 09:40:42 | Wake Source | PME - XHCI (USB 2.0 port) | 1 42 | 2020-12-10 09:40:42 | Wake Source | GPE # | 109 which verifies it still functions for the PCH XHCI controller Change-Id: I9f28354e031e3eda587f4faf8ef7595dce8b33ea Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47411 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/intel/xeon_sp/nvs: Use common global NVSMarc Jones
The xeon_sp ACPI NVS and ramstage NVS were out of sync. Since there isn't anything uncommon with the soc NVS, use the Intel common NVS. This covers the NVS cases of common code used by xeon_sp. Update the mainboards for this change. Change-Id: Icf422f5b75a1ca7a3d8f3d63638b8d86a56fdd7b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-12-10soc/amd/stoneyridge/reset: use port and bit defines from cf9_reset.hFelix Held
The register name and the name of one bit are slightly different, but have the same functionality. Change-Id: Ie49975bb43868cbb2dc986e66dc5b7291e70222f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48507 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/mediatek/mt8192: Init SSPMTingHan.Shen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. Signed-off-by: TingHan.Shen <tinghan.shen@mediatek.com> Change-Id: Ia834852af50e9e7e1b1222ed1e2be20e43139c62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47786 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/mediatek/mt8192: Init DPMHuayang Duan
DPM is a hardware module for DRAM power management and for better power saving in low power mode. BUG=none TEST=Boots correctly on Asurada Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I16b341ad63940b45b886c4a7fd733c1970624e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46393 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10mb/intel/ehlcrb: Add EHL CRB memory initialization supportTan, Lean Sheng
Update memory parameters based on memory type supported by Elkhart Lake CRB: 1. Update spd data for EHL LPDDR4X memory - DQ byte map - DQS CPU-DRAM map - Rcomp resistor - Rcomp target 2. Add configurations for vref_ca & interleaved memory 3. Add EHL CRB on board LPDDR4X SPD data bin file 4. Update mainboard related FSPM UPDs as part of memory initialization Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Ifd85caa9ac1c9baf443734eb17ad5683ee92ca3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/48127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-10soc/intel/elkhartlake: Fix EHL mainboard build fail errorsTan, Lean Sheng
When EHL initial mainboard patch is uploaded, there are some build errors caused by EHL soc codes. Here are the fixes: 1. include gpio_op.asl to resolve undefined variables in scs.asl 2. remove unused variables in fsp_params.c 3. rearrage sequences of #includes to fix build dependency of soc/gpio_defs.h in intelblocks/gpio.h 4. add the __weak to mainboard_memory_init_params function 5. add the missing _len as per this patch changes https://review.coreboot.org/c/coreboot/+/45873 Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Idaa8b0b5301742287665abde065ad72965bc62b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47804 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/mediatek/mt8192: Load MCUPM firmware and boot up MCUPMYidi Lin
MCUPM is the MediaTek proprietary firmware for MCU power management. TEST=1. emerge-asurada coreboot chromeos-bootimage; 2. See following log during booting. load_blob_file: Load mcupm.bin in 35 msecs, size 115668 bytes 3. Test suspend/resume by: a. suspend (on DUT): powerd_dbus_suspend b. resume (on host): dut-control power_state:on Change-Id: I50bea1942507b4a40df9730b4e1bf98980d74277 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46392 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/mediatek/mt8192: add spmfw loaderRoger Lu
This patch adds support for loading spm firmware from cbfs to spm sram. Spm needs its own firmware to enable spm suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. BUG=b:159079649 TEST=suspend with command `powerd_dbus_suspend` and wake up the DUT by powerkey Signed-off-by: Roger Lu <roger.lu@mediatek.com> Change-Id: I6478b98f426d2f3e0ee919d37d21d909ae8a6371 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-10soc/mediatek/mt8183: Use mtk_init_mcu to init SSPMYidi Lin
Use mtk_init_mcu API to load and run sspm firmware. TEST=emerge-kukui coreboot Change-Id: I63c4b99342bdebb2a94cbf0c6380b0a6817853e7 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-10soc/mediatek/mt8183: Add DRAM_DMA sectionYidi Lin
mtk_init_mcu uses DRAM_DMA section as CBFS buffer. The change "mediatek/mt8183: Remove DRAM_DMA section" is reverted for using mtk_init_mcu. On mt8173 and mt8192, this region is used by DMA hardware and is marked as non-cacheable resource. On mt8183, this region is reserved as CBFS buffer, so it is not necessary to be marked as non-cacheable resource. Change-Id: I7ce9f68883e2787ee7f3c5066f4c47c5ca315633 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-10soc/mediatek/common: Add common API for loading firmwaresYidi Lin
Add mtk_init_mcu to load the firmware to the specified memory address and run the firmware. This function also measures the load time and the blob size. For example: mtk_init_mcu: Loaded (and reset) dpm.pm in 15 msecs (14004 bytes) Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ie94001bbda25fe015f43172e92a1006e059de223 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-10soc/amd/picasso/reset: use port and bit defines from cf9_reset.hFelix Held
The register name and the name of one bit are slightly different, but have the same functionality. Change-Id: I025f1c7b2c7643afe245f2275ae6ef45e64b951a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48487 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/amd/picasso/reset: remove leftover PCI includesFelix Held
On Stoneyridge some PCI registers were accessed in this compilation unit, but on Picasso this is no longer the case. Change-Id: Ifbf65f9724a14d4847af98930759c865453775b4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48486 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd/cezanne: print APU family and model in bootblock_soc_initFelix Held
Change-Id: I457188c905167affc1ebcea835a36df822ecb23c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/cezanne: add basic early FCH initialization to bootblockFelix Held
Change-Id: I1c6d32a5498a7adcee3c8c3145f85e9dba26bf7e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/cezanne: add common SMBus code to buildFelix Held
Since the IOAPIC in the FCH gets set up in the SMBus code, also select IOAPIC in Kconfig. Change-Id: I4163e28ca9e68e5fd36421d90aafc20bce43a174 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48474 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd/cezanne: call bootblock_main_with_basetime in bootblock_c_entryFelix Held
Change-Id: Iaac661fcb7581236ace4b5bf057b3e70289f1c8b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/picasso,stoneyridge: drop unused BIOSRAM offset definesFelix Held
The two Socs don't use this functionality and biosram.c in the common code is the only place where those defines are used, but it doesn't include soc/iomap.h and has its own definitions instead. Change-Id: I973df4ab39a94e89ea2ed6ffb639c5a85b8df456 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/picasso: Rename SD_EMMC_EMMC_DDR_52 to SD_EMMC_EMMC_DDR_104Raul E Rangel
The number at the end actually means the max MiB/s. So 52 MHz clock @ 8x data width, sampled on each clock edge = 104 MiB/s. According to JEDEC Standard No. 84-B51A (JESD84-B51A), maximum bandwidth & clock frequency for various MMC bus speed modes are (at x8 bus width): MMC_Legacy: 26 MB/s at 26 MHz Single Data Rate (SDR) MMC_HS: 52 MB/s at 52 MHz SDR MMC_DDR52: 104 MB/s at 52 MHz Dual Data Rate (DDR) MMC_HS200: 200 MB/s at 200 MHz SDR MMC_HS400: 400 MB/s at 200 MHz DDR BUG=b:159823235 BRANCH=zork TEST=build zork Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7818d8cb5ed5974c60a900477a0aa2ecc904db0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48309 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd: Remove Kconfig BOOTBLOCK_ADDRKyösti Mälkki
Due the location of X86_RESET_VECTOR, the anchor point for linking the bootblock is at the end, which equals ROMSTAGE_ADDR. Change-Id: I2d25911582393c9a10fd3afa1a484eda2604d95a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-09soc/amd: Remove Kconfig X86_RESET_VECTORKyösti Mälkki
The architectural requirement is for the address to be located at the end of bootblock -0x10 bytes, so the definition was redundant with other Kconfig variables. Change-Id: Ia014470cfadf0b401a12a2de6dce3b1fc1862137 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-09soc/intel/common/dmi: Add support for locking down SRLSrinidhi N Kaushik
This change adds support to lock down the DMI configuration in dmi_lockdown_cfg() by setting Secure Register Lock (SRL) bit in DMI control register. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I98a82ce4a2f73f8a1504e5ddf77ff2e81ae3f53f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48258 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/intel/common/dmi: Move DMI defines into DMI driver headerSrinidhi N Kaushik
Move definitions of DMI control register and Secure Register Lock (SRL) bit into common/block/dmi driver header file. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Iefee818f58f399d4a127662a300b6e132494bad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48257 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/intel/tigerlake: Enable support for extended BIOS windowFurquan Shaikh
This change enables support for extended BIOS window by selecting FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW and providing base and size of the extended window in host address space. BUG=b:171534504 Cq-Depend: chromium:2566231 Change-Id: I039155506380310cf867f5f8c5542278be40838a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-12-09soc/amd/picasso/southbridge: drop unused sb_enableFelix Held
Change-Id: I10a16c8f9db994ff33407619a7ab6e453b026b15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/picasso: split southbridge into bootblock and ramstage codeFelix Held
The ramstage parts gets renamed to fch.c and the bootblock one to early_fch.c. No functionality from the old southbridge file is used in romstage, so don't link it there. Change-Id: I7ca3b5238c3b841191dd0459996b691edd76fbf8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/cezanne: select common ACPIMMIO blockFelix Held
Change-Id: I7f7d11d84733a43500b0135e565d91fe5c493279 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd: factor out functionality to print last reset sourceFelix Held
Change-Id: I5cec38dac7ea27aa316f5dd4f91ed84627a0f937 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/common/block/acpimmio: use all-y for mmio_util targetFelix Held
Since mmio_util gets also linked into verstage on PSP, all-y can be used here. Change-Id: I03572d760b485938f0d00b6cead00746eda6ca09 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48436 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd: factor out legacy I/O and cf9 decode enable functionsFelix Held
Replace sb prefix with fch prefix, since those are all FCHs and no south bridges any more. Verstage on PSP uses the I/O access mechanism instead of the MMIO one, so keep a separate function for that, but also move it to the common mmio_util file to have them all in one place. Change-Id: I47dac9ee3d9e27f7b7a5fddab17cf4fc10de6c3e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48435 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/amd/common/block/smbus: refactor fch_smbus_initFelix Held
Move the setup of the base address to a separate function and explicitly set the SMBUS and ASF I/O port decode even though it is expected to already be set after reset. Change-Id: I8072ab78985021d19b6528100c674ecdd777e62e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd: factor out PM_DECODE_EN register definitionsFelix Held
Change-Id: I005709a8780725339e7c08fbfff94e89c8ef26da Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd: remove unused PM_ISA_CONTROL definitionsFelix Held
ACPIMMIO_DECODE_REGISTER_04 is the definition in the common ACPIMMIO code block that actually gets used. Also fix the indentation of the ACPIMMIO register decode defines in the common code. Change-Id: Ib2c460541be768fe05d8cc3d19a14dbd9c114a45 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-09soc/amd/stoneyridge/southbridge: make sb_disable_4dw_burst staticFelix Held
sb_disable_4dw_burst is only used in the same compilation unit, so no need to make it externally visible. Change-Id: I6c7c96f67b98fb8ed808f45a7685c4d72a10d32c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-08soc/intel/common/fast_spi: Add Lockdown of extended BIOS regionSrinidhi N Kaushik
This change adds support to Lock down the configuration of extended BIOS region. This is done as part of fast_spi_lockdown_cfg() so that it is consistent with the other lockdown. Change includes: 1. New helper function fast_spi_lock_ext_bios_cfg() added that will basically set EXT_BIOS_LOCK. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I730fc12a9c5ca8bb4a1f946cad45944dda8e0518 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48068 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/fast_spi: Add support for configuring MTRRsSrinidhi N Kaushik
This change enables caching for extended BIOS region. Currently, caching is enabled for the standard BIOS region upto a maximum of 16MiB using fast_spi_cache_bios_region, used the same function to add the support for caching for extended BIOS region as well. Changes include: 1. Add a new helper function fast_spi_cache_ext_bios_window() which calls fast_spi_ext_bios_cache_range() which calls fast_spi_get_ext_bios_window() to get details about the extended BIOS window from the boot media map and checks for allignment and set mtrr. 2. Make a call to fast_spi_cache_ext_bios_region() from fast_spi_cache_bios_region (). 3. Add new helper function fast_spi_cache_ext_bios_postcar() which does caching ext BIOS region in postcar similar to 1. 4. If the extended window is used, then it enables caching for this window similar to how it is done for the standard window. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I9711f110a35a167efe3a4c912cf46c63c0812779 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47991 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08src/soc/intel/tigerlake: Add SPI DMI Destination IDSrinidhi N Kaushik
This change adds the SPI-DMI Destination ID for tigerlake soc. This is needed for enabling support for extended BIOS region. Also, implements a SOC helper function soc_get_spi_dmi_destination_id() which returns SPI-DMI Destination id. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I0b6a8af0c1e79fa668ef2f84b93f3bbece59eb6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-08soc/intel/common/fast_spi: Add extended decode window supportSrinidhi N Kaushik
This change enables support for configuration of extended BIOS region decode window. This configuration needs to be performed as early as possible in the boot flow. This is required to ensure that any access to the SPI flash region below 16MiB in coreboot is decoded correctly. The configuration for the extended BIOS window if required is done as part of fast_spi_early_init(). Changes include: 1. Make a call to fast_spi_enable_ext_bios() before the bus master and memory space is enabled for the fast SPI controller. 2. Added a helper function fast_spi_enable_ext_bios() which calls fast_spi_get_ext_bios_window() to get details about the extended BIOS window from the boot media map. 3. Depending upon the SPI flash device used by the mainboard and the size of the BIOS region in the flashmap, this function will have to perform this additional configuration only if the BIOS region is greater than 16MiB 4. Adddditionally, set up the general purpose memory range registers in DMI. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idafd8be0261892122d0b5a95d9ce9d5604a10cf2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47990 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/dmi: Add DMI driver supportSrinidhi N Kaushik
This change allows configuring the General Purpose Memory Range(GPMR) register in BIOS to set up the decoding in DMI. This driver provides the following functionality: 1. Add a helper function dmi_enable_gpmr which takes as input base, limit and destination ID to configure in general purpose memory range registers and then set the GPMR registers in the next available free GMPR and enable the decoding. 2. Add helper function get_available_gpmr which returns available free GPMR. 3. This helper function can be utilized by the fast SPI driver to configure the window for the extended BIOS region. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I34a894e295ecb98fbc4a81282361e851c436a403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47988 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08coreboot tables: Add SPI flash memory map windows to coreboot tablesFurquan Shaikh
This change adds details about the memory map windows to translate addresses between SPI flash space and host address space to coreboot tables. This is useful for payloads to setup the translation using the decode windows already known to coreboot. Until now, there was a single decode window at the top of 4G used by all x86 platforms. However, going forward, platforms might support more decode windows and hence in order to avoid duplication in payloads this information is filled in coreboot tables. `lb_spi_flash()` is updated to fill in the details about these windows by making a call to `spi_flash_get_mmap_windows()` which is implemented by the driver providing the boot media mapping device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I00ae33d9b53fecd0a8eadd22531fdff8bde9ee94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48185 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/systemagent: Reserve window used for extended BIOS decodingFurquan Shaikh
This change reserves the window used for extended BIOS decoding as a fixed MMIO resource using read_resources callback in systemagent driver. This ensures that the resource allocator does not allocate from this window. Additionally, this window is also marked as fixed memory region in _CRS for PNP0C02 device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I42b5a0ebda2627f72b825551c566cd22dbc5cca7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/common/fast_spi: Add custom boot media deviceFurquan Shaikh
This change enables support for a custom boot media device in fast SPI controller driver if the platform supports additional decode window for mapping BIOS regions greater than 16MiB. Following new Kconfigs are added: 1. FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW: SoC can select this to indicate support for extended BIOS window. 2. EXT_BIOS_WIN_BASE: If FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW is selected, this provides the base address of the host space that is reserved for mapping the extended window. 3. EXT_BIOS_WIN_SIZE: If FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW is selected, this provides the size of the host space reserved for mapping extended window. If platform indicates support for extended BIOS decode window, cbfstool add command is provided additional parameters for the decode window using --ext-win-base and --ext-win-size. It is the responsibility of the mainboard fmap author to ensure that the sections in the BIOS region do not cross 16MiB boundary as the host space windows are not contiguous. This change adds a build time check to ensure no sections in FMAP cross the 16MiB boundary. Even though the platform supports extended window, it depends upon the size of BIOS region (which in turn depends on SPI flash size) whether and how much of the additional window is utilized at runtime. This change also provides helper functions for rest of the coreboot components to query how much of the extended window is actually utilized. BUG=b:171534504 Change-Id: I1b564aed9809cf14b40a3b8e907622266fc782e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/cannonlake: Restore alphabetical order of Kconfig selectsFelix Singer
Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I5fa1e7216f3e80de0da5a58b84f221af321e4753 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48396 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
Align the SATA mode names with soc/skl providing a consistent API. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I54b48462852d7fe0230dde0c272da3d12365d987 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 09:31:32 +0000