summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Expand)Author
2014-11-14tegra124: i2c: Reset the controller when there's an error.Gabe Black
2014-11-14tegra124: fix the dangerous VPR write orderJoseph Lo
2014-11-14tegra124: Add some functions for resetting peripherals.Gabe Black
2014-11-14t124: Clean up display init functionsJimmy Zhang
2014-11-13intel: use crosscompiler readelf, instead of globalPatrick Georgi
2014-11-13arm: Put assembly functions into separate sectionsJulius Werner
2014-11-13ipq8064: Make timer code compileVadim Bendebury
2014-11-13ipq8064: Configure proper bootblock stack and load addressVadim Bendebury
2014-11-13Use sbl blobs from a private locationVadim Bendebury
2014-11-13ipq806x: Add support for GPIO operationsFurquan Shaikh
2014-11-13tegra124: Add a macro specifically for configuring the I2C controller clocks.Gabe Black
2014-11-13tegra124: Fix some bugs in the clock configuration macros.Gabe Black
2014-11-13t124: Skip PLLP init to 408MHzJimmy Zhang
2014-11-13t124: nyan: Enable lock bit on pllJimmy Zhang
2014-11-13tegra124: fix OSC initialization on LP0 resumeAndrew Bresticker
2014-11-13tegra124: fix PLLU parametersAndrew Bresticker
2014-11-13tegra124: Make the PLLX frequency selectable by model.Gabe Black
2014-11-12ipq806x: Typecast address to void * in read/write operationsFurquan Shaikh
2014-11-12ipq806x: Add an include/ folder to ipq806xFurquan Shaikh
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
2014-11-12Include IPQ8064 SBLs code in the coreboot bootblockVadim Bendebury
2014-11-12tegra124: enable JTAG in Security ModeJimmy Zhang
2014-11-12tegra124: Program PWM1 to drive panel backlightAndrew Chew
2014-11-12tegra124: Add pwm_controller registersAndrew Chew
2014-11-12tegra124: Fix PWM pinmux functionsAndrew Chew
2014-11-12tegra124: Add PWM base addressAndrew Chew
2014-11-12tegra124: nyan: Keep in memory structures below 4GB.Gabe Black
2014-11-10arm: Redesign, clarify and clean up cache related codeJulius Werner
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
2014-11-09Provide ability to integrate with QComm SBLsVadim Bendebury
2014-11-09arm: Thumb ALL the things!Julius Werner
2014-11-08intel: Use 'FORCEWAKE_ACK_HSW' define over '0x130044'Edward O'Callaghan
2014-11-04Redundant addr '&' operator on func ptr's in struct initiatorEdward O'Callaghan
2014-11-01{cpu,soc}: Use DEVICE_NOOP macro over dummy symbolEdward O'Callaghan
2014-10-28baytrail: Remove unused devicetree fieldsShawn Nematbakhsh
2014-10-28baytrail: gfx: Don't configure hotplug + backlight registersShawn Nematbakhsh
2014-10-28Baytrail/dptf: Always return 0 in TCPU._PPCKein Yuan
2014-10-28baytrail: handle MRC being an ELF fileAaron Durbin
2014-10-28baytrail: Configure MSR for 2-core and 4-core P-state configutationDuncan Laurie
2014-10-28baytrail: move cache-as-ram base address to 0xfe000000Aaron Durbin
2014-10-28baytrail: romstage: Add function to check SW WP status for vbootShawn Nematbakhsh
2014-10-22reg_script: default to n for ARCH_X86Isaac Christensen
2014-10-22tegra/nyan*: sdram updatesTom Warren
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
2014-10-22broadwell: Update Haswell and Broadwell E0 microcodeDuncan Laurie
2014-10-22broadwell: Update microcodeDuncan Laurie
2014-10-22broadwell: ACPI, romstage, and other updatesDuncan Laurie
2014-10-22broadwell: Update D0 microcode to FFFF000EDuncan Laurie
2014-10-22broadwell: Update microcode for supported CPUsDuncan Laurie
2014-10-22broadwell: add new intel SOCDuncan Laurie
2014-10-22baytrail: Move HDA verb table to Intel SOC common directoryDuncan Laurie
2014-10-22baytrail: Move MRC cache code to a common directoryDuncan Laurie
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
2014-10-19x86 romstage: Move stack just below RAMTOPKyösti Mälkki
2014-10-19haswell baytrail: Enable RELOCATABLE_RAMSTAGEKyösti Mälkki
2014-10-16uarts: 32/64 cleanupRonald G. Minnich
2014-10-14intel/fsp_baytrail: Add padding so device_nvs location matches ACPIScott Radcliffe
2014-10-14baytrail: Add padding to the end of device_nvs to match ACPIScott Radcliffe
2014-10-14intel/fsp_baytrail: Clear the GNVS area prior to fillingScott Radcliffe
2014-10-09intel/fsp_baytrail: Include header for "southcluster_smm_save_gpio_route"Kayalvizhi Dhandapani
2014-10-09intel/fsp_baytrail: fix error "unknown type device_t", when SMM Module addedKayalvizhi Dhandapani
2014-10-09intel/fsp_baytrail: Fix SMM/SMIKayalvizhi Dhandapani
2014-10-01baytrail: update C0 microcodeShawn Nematbakhsh
2014-09-29intel/fsp_baytrail: Add S3 suspend/resume SupportMohan D'Costa
2014-09-25soc/qualcomm: Add generic support skeleton for ipq806xFurquan Shaikh
2014-09-24baytrail: add 80c microcode for C0 partsAaron Durbin
2014-09-22tegra124/nyan: memory and display updatesAndrew Bresticker
2014-09-22arm: Move libgcc assembly macros to arch/asm.hJulius Werner
2014-09-22Add check_member macro to allow clean and easy struct offset checkingJulius Werner
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
2014-09-19exynos5250: remove unused ret variable in cpu.cIsaac Christensen
2014-09-18rambi/baytrail: ACPI, GPIO, audio, misc updatesShawn Nematbakhsh
2014-09-17spi: add Kconfig variable for dual-output read enableDavid Hendricks
2014-09-15exynos5250: Fix PMU register address mapJulius Werner
2014-09-13arm: Move exception_init() close to console_init()Julius Werner
2014-09-13tegra124/nyan: display, clock, and other updatesJulius Werner
2014-09-12tegra124/nyan: various fixes and additionsHung-Te Lin
2014-09-11tegra124/nyan: rougly stable code baseGabe Black
2014-09-10tegra124: Make tegra124 compilable with serial turned off.Gabe Black
2014-09-10nyan: Use the new pinmux functions as part of UART setup.Gabe Black
2014-09-10Exynos5420: Fix up the i2c driver for use with the TPM driverGabe Black
2014-09-10nvidia-cbootimage: integrate into coreboot makeIsaac Christensen
2014-09-09arm: Update a stale comment in bootblock .S filesDavid Hendricks
2014-09-09exynos: Install the BL1 and set the checksum in the Makefile.Gabe Black
2014-09-09tegra124: Switch the bootblock over the ARMv4 impelementation.Gabe Black
2014-09-08tegra124: return the UART base address based on indexIsaac Christensen
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
2014-08-29tegra124: add custom uartGabe Black
2014-08-29exynos: Fix the name of the chip_operations structures.Gabe Black
2014-08-29arm: libpayload: Make cache invalidation take pointers instead of integersJulius Werner
2014-08-28soc/intel/baytrail/Kconfig: Remove empty line at top filePaul Menzel
2014-08-28tegra124: Add a custom bootblock implementation.Gabe Black
2014-08-26armv7: Move Exynos from 'cpu' to 'soc'.Hung-Te Lin
2014-08-22ARM: Overhaul the ARM Makefile.Gabe Black
2014-08-19tegra124: Implement the tegra i2c driver.Gabe Black
2014-08-19tegra124: Implement driver code for the pinmux, pingroup controls, and GPIOs.Gabe Black
2014-08-19tegra124: Pick addresses to load the rom and ram stages.Gabe Black
2014-08-18tegra: Change how tegra124 and tegra include files from each other.Gabe Black
2014-08-15tegra124: fix Kconfig ARCH settingsIsaac Christensen
2014-08-15Move baytrail-specific config to baytrail.Vladimir Serbinenko
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 16:58:54 +0000